If two processes share the same credentials and NFSv4 open stateid, then
allow them both to dirty the same page, even if their nfs_open_context
differs.
Signed-off-by: NTrond Myklebust <trond.myklebust@primarydata.com>

The flexfiles layout in particular, seems to want to poke around in the
O_DIRECT flags when retransmitting.
This patch sets up an interface to allow it to call back into O_DIRECT
to handle retransmission correctly. It also fixes a potential bug whereby
we could change the behaviour of O_DIRECT if an error is already pending.
Signed-off-by: NTrond Myklebust <trond.myklebust@primarydata.com>

When we fail to queue a read page to IO descriptor,
we need to clean it up otherwise it is hanging around
preventing nfs module from being removed.

When we fail to queue a write page to IO descriptor,
we need to clean it up and also save the failure status
to open context. Then at file close, we can try to write
pages back again and drop the page if it fails to writeback
in .launder_page, which will be done in the next patch.
Signed-off-by: NPeng Tao <tao.peng@primarydata.com>
Signed-off-by: NTrond Myklebust <trond.myklebust@primarydata.com>

Operations to which stateid information is added:
close, delegreturn, open, read, setattr, layoutget, layoutcommit, test_stateid,
write, lock, locku, lockt

Format is "stateid=<seqid>:<crc32 hash stateid.other>", also "openstateid=",
"layoutstateid=", and "lockstateid=" for open_file, layoutget, set_lock
tracepoints.

New function is added to internal.h, nfs_stateid_hash(), to compute the hash

trace_nfs4_setattr() is moved from nfs4_do_setattr() to _nfs4_do_setattr()
to get access to stateid.

trace_nfs4_setattr and trace_nfs4_delegreturn are changed from INODE_EVENT
to new event type, INODE_STATEID_EVENT which is same as INODE_EVENT but adds
stateid information

for locking tracepoints, moved trace_nfs4_set_lock() into _nfs4_do_setlk()
to get access to stateid information, and removed trace_nfs4_lock_reclaim(),
trace_nfs4_lock_expired() as they call into _nfs4_do_setlk() and both were
previously same LOCK_EVENT type.
Signed-off-by: NOlga Kornievskaia <kolga@netapp.com>
Signed-off-by: NTrond Myklebust <trond.myklebust@primarydata.com>

Jan Stancek reported that I wrecked things for him by fixing things for
Vladimir :/

His report was due to an UNINTERRUPTIBLE wait getting -EINTR, which
should not be possible, however my previous patch made this possible by
unconditionally checking signal_pending().

We cannot use current->state as was done previously, because the
instruction after the store to that variable it can be changed.  We must
instead pass the initial state along and use that.

Fixes: 68985633 ("sched/wait: Fix signal handling in bit wait helpers")
Reported-by: NJan Stancek <jstancek@redhat.com>
Reported-by: NChris Mason <clm@fb.com>
Tested-by: NJan Stancek <jstancek@redhat.com>
Tested-by: NVladimir Murzin <vladimir.murzin@arm.com>
Tested-by: NChris Mason <clm@fb.com>
Reviewed-by: NPaul Turner <pjt@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: tglx@linutronix.de
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: hpa@zytor.com
Signed-off-by: NPeter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The NFSv4 delegation spec allows the server to tell a client to limit how
much data it cache after the file is closed. In return, the server
guarantees enough free space to avoid ENOSPC situations, etc.
Prior to this patch, we assumed we could always cache aggressively after
close. Unfortunately, this causes problems with servers that set the
limit to 0 and therefore do not offer any ENOSPC guarantees.
Signed-off-by: NTrond Myklebust <trond.myklebust@primarydata.com>

They already exist and do the exact same thing.  Let's save ourselves
several lines of code!
Signed-off-by: NAnna Schumaker <Anna.Schumaker@Netapp.com>
Signed-off-by: NTrond Myklebust <trond.myklebust@primarydata.com>

pnfs_layout_mark_request_commit() needs to ensure that it adds the
request to the commit list atomically with all the other updates
in order to prevent corruption to buckets[ds_commit_idx].wlseg
due to races with pnfs_generic_clear_request_commit().

Fixes: 338d00cf ("pnfs: Refactor the *_layout_mark_request_commit...")
Cc: stable@vger.kernel.org # v4.0+
Signed-off-by: NTrond Myklebust <trond.myklebust@primarydata.com>

An oops caused by using other thread's stack space in sunrpc ASYNC sending thread.

[ 9839.007187] ------------[ cut here ]------------
[ 9839.007923] kernel BUG at fs/nfs/nfs4xdr.c:910!
[ 9839.008069] invalid opcode: 0000 [#1] SMP
[ 9839.008069] Modules linked in: blocklayoutdriver rpcsec_gss_krb5 nfsv4 dns_resolver nfs fscache snd_hda_codec_generic snd_hda_intel snd_hda_controller snd_hda_codec snd_hwdep snd_seq snd_seq_device snd_pcm joydev iosf_mbi crct10dif_pclmul snd_timer crc32_pclmul crc32c_intel ghash_clmulni_intel snd soundcore ppdev pvpanic parport_pc i2c_piix4 serio_raw virtio_balloon parport acpi_cpufreq nfsd nfs_acl lockd grace auth_rpcgss sunrpc qxl drm_kms_helper virtio_net virtio_console virtio_blk ttm drm virtio_pci virtio_ring virtio ata_generic pata_acpi
[ 9839.008069] CPU: 0 PID: 308 Comm: kworker/0:1H Not tainted 4.0.0-0.rc4.git1.3.fc23.x86_64 #1
[ 9839.008069] Hardware name: Bochs Bochs, BIOS Bochs 01/01/2011
[ 9839.008069] Workqueue: rpciod rpc_async_schedule [sunrpc]
[ 9839.008069] task: ffff8800d8b4d8e0 ti: ffff880036678000 task.ti: ffff880036678000
[ 9839.008069] RIP: 0010:[<ffffffffa0339cc9>]  [<ffffffffa0339cc9>] reserve_space.part.73+0x9/0x10 [nfsv4]
[ 9839.008069] RSP: 0018:ffff88003667ba58  EFLAGS: 00010246
[ 9839.008069] RAX: 0000000000000000 RBX: 000000001fc15e18 RCX: ffff8800c0193800
[ 9839.008069] RDX: ffff8800e4ae3f24 RSI: 000000001fc15e2c RDI: ffff88003667bcd0
[ 9839.008069] RBP: ffff88003667ba58 R08: ffff8800d9173008 R09: 0000000000000003
[ 9839.008069] R10: ffff88003667bcd0 R11: 000000000000000c R12: 0000000000010000
[ 9839.008069] R13: ffff8800d9173350 R14: 0000000000000000 R15: ffff8800c0067b98
[ 9839.008069] FS:  0000000000000000(0000) GS:ffff88011fc00000(0000) knlGS:0000000000000000
[ 9839.008069] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 9839.008069] CR2: 00007f988c9c8bb0 CR3: 00000000d99b6000 CR4: 00000000000407f0
[ 9839.008069] Stack:
[ 9839.008069]  ffff88003667bbc8 ffffffffa03412c5 00000000c6c55680 ffff880000000003
[ 9839.008069]  0000000000000088 00000010c6c55680 0001000000000002 ffffffff816e87e9
[ 9839.008069]  0000000000000000 00000000477290e2 ffff88003667bab8 ffffffff81327ba3
[ 9839.008069] Call Trace:
[ 9839.008069]  [<ffffffffa03412c5>] encode_attrs+0x435/0x530 [nfsv4]
[ 9839.008069]  [<ffffffff816e87e9>] ? inet_sendmsg+0x69/0xb0
[ 9839.008069]  [<ffffffff81327ba3>] ? selinux_socket_sendmsg+0x23/0x30
[ 9839.008069]  [<ffffffff8164c1df>] ? do_sock_sendmsg+0x9f/0xc0
[ 9839.008069]  [<ffffffff8164c278>] ? kernel_sendmsg+0x58/0x70
[ 9839.008069]  [<ffffffffa011acc0>] ? xdr_reserve_space+0x20/0x170 [sunrpc]
[ 9839.008069]  [<ffffffffa011acc0>] ? xdr_reserve_space+0x20/0x170 [sunrpc]
[ 9839.008069]  [<ffffffffa0341b40>] ? nfs4_xdr_enc_open_noattr+0x130/0x130 [nfsv4]
[ 9839.008069]  [<ffffffffa03419a5>] encode_open+0x2d5/0x340 [nfsv4]
[ 9839.008069]  [<ffffffffa0341b40>] ? nfs4_xdr_enc_open_noattr+0x130/0x130 [nfsv4]
[ 9839.008069]  [<ffffffffa011ab89>] ? xdr_encode_opaque+0x19/0x20 [sunrpc]
[ 9839.008069]  [<ffffffffa0339cfb>] ? encode_string+0x2b/0x40 [nfsv4]
[ 9839.008069]  [<ffffffffa0341bf3>] nfs4_xdr_enc_open+0xb3/0x140 [nfsv4]
[ 9839.008069]  [<ffffffffa0110a4c>] rpcauth_wrap_req+0xac/0xf0 [sunrpc]
[ 9839.008069]  [<ffffffffa01017db>] call_transmit+0x18b/0x2d0 [sunrpc]
[ 9839.008069]  [<ffffffffa0101650>] ? call_decode+0x860/0x860 [sunrpc]
[ 9839.008069]  [<ffffffffa0101650>] ? call_decode+0x860/0x860 [sunrpc]
[ 9839.008069]  [<ffffffffa010caa0>] __rpc_execute+0x90/0x460 [sunrpc]
[ 9839.008069]  [<ffffffffa010ce85>] rpc_async_schedule+0x15/0x20 [sunrpc]
[ 9839.008069]  [<ffffffff810b452b>] process_one_work+0x1bb/0x410
[ 9839.008069]  [<ffffffff810b47d3>] worker_thread+0x53/0x470
[ 9839.008069]  [<ffffffff810b4780>] ? process_one_work+0x410/0x410
[ 9839.008069]  [<ffffffff810b4780>] ? process_one_work+0x410/0x410
[ 9839.008069]  [<ffffffff810ba7b8>] kthread+0xd8/0xf0
[ 9839.008069]  [<ffffffff810ba6e0>] ? kthread_worker_fn+0x180/0x180
[ 9839.008069]  [<ffffffff81786418>] ret_from_fork+0x58/0x90
[ 9839.008069]  [<ffffffff810ba6e0>] ? kthread_worker_fn+0x180/0x180
[ 9839.008069] Code: 00 00 48 c7 c7 21 fa 37 a0 e8 94 1c d6 e0 c6 05 d2 17 05 00 01 8b 03 eb d7 66 0f 1f 84 00 00 00 00 00 66 66 66 66 90 55 48 89 e5 <0f> 0b 0f 1f 44 00 00 66 66 66 66 90 55 48 89 e5 41 54 53 89 f3
[ 9839.008069] RIP  [<ffffffffa0339cc9>] reserve_space.part.73+0x9/0x10 [nfsv4]
[ 9839.008069]  RSP <ffff88003667ba58>
[ 9839.071114] ---[ end trace cc14c03adb522e94 ]---
Signed-off-by: NKinglong Mee <kinglongmee@gmail.com>
Signed-off-by: NTrond Myklebust <trond.myklebust@primarydata.com>

Currently, a bdi (backing_dev_info) embeds single wb (bdi_writeback)
and the role of the separation is unclear.  For cgroup support for
writeback IOs, a bdi will be updated to host multiple wb's where each
wb serves writeback IOs of a different cgroup on the bdi.  To achieve
that, a wb should carry all states necessary for servicing writeback
IOs for a cgroup independently.

This patch moves bdi->bdi_stat[] into wb.

* enum bdi_stat_item is renamed to wb_stat_item and the prefix of all
  enums is changed from BDI_ to WB_.

* BDI_STAT_BATCH() -> WB_STAT_BATCH()

* [__]{add|inc|dec|sum}_wb_stat(bdi, ...) -> [__]{add|inc}_wb_stat(wb, ...)

* bdi_stat[_error]() -> wb_stat[_error]()

* bdi_writeout_inc() -> wb_writeout_inc()

* stat init is moved to bdi_wb_init() and bdi_wb_exit() is added and
  frees stat.

* As there's still only one bdi_writeback per backing_dev_info, all
  uses of bdi->stat[] are mechanically replaced with bdi->wb.stat[]
  introducing no behavior changes.
Signed-off-by: NTejun Heo <tj@kernel.org>
Reviewed-by: NJan Kara <jack@suse.cz>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Wu Fengguang <fengguang.wu@intel.com>
Cc: Miklos Szeredi <miklos@szeredi.hu>
Cc: Trond Myklebust <trond.myklebust@primarydata.com>
Signed-off-by: NJens Axboe <axboe@fb.com>

Ensure that other operations that race with our write RPC calls
cannot revert the file size updates that were made on the server.
Signed-off-by: NTrond Myklebust <trond.myklebust@primarydata.com>
Tested-by: NChuck Lever <chuck.lever@oracle.com>

Signed-off-by: NTom Haynes <loghyr@primarydata.com>
Signed-off-by: NTrond Myklebust <trond.myklebust@primarydata.com>

If we have to do a return-on-close in the delegreturn code, then
we must ensure that the inode and super block remain referenced.

Cc: Peng Tao <tao.peng@primarydata.com>
Cc: stable@vger.kernel.org # 3.17.x
Signed-off-by: NTrond Myklebust <trond.myklebust@primarydata.com>
Reviewed-by: NPeng Tao <tao.peng@primarydata.com>

To allow pnfs LD to ask direct writes to be resend.
Signed-off-by: NPeng Tao <tao.peng@primarydata.com>

Let it return current nfs_pgio_mirror in use depending on pg_mirror_count.
For read, we always use pg_mirrors[0], so this effectively gives us freedom
to use pg_mirror_idx to track the actual mirror to read from through out the
IO stack.
Signed-off-by: NPeng Tao <tao.peng@primarydata.com>
Signed-off-by: NTom Haynes <loghyr@primarydata.com>

so that we don't reset desc->pg_mirror_idx for read unnecessarily.
Remove WARN_ON_ONCE from __nfs_pageio_add_request to allow LD to
set pg_mirror_idx for read where pg_mirror_count is always 1.
Signed-off-by: NPeng Tao <tao.peng@primarydata.com>
Signed-off-by: NTom Haynes <loghyr@primarydata.com>

This patch adds mirrored write support to the pgio layer. The default
is to use one mirror, but pgio callers may define callbacks to change
this to any value up to the (arbitrarily selected) limit of 16.

The basic idea is to break out members of nfs_pageio_descriptor that cannot
be shared between mirrored DSes and put them in a new structure.
Signed-off-by: NWeston Andros Adamson <dros@primarydata.com>

Pass ds_commit_idx through the nfs commit path. It's used to select
the commit bucket when using pnfs and is ignored when not using pnfs.
Several functions had to be changed: nfs_retry_commit,
nfs_mark_request_commit, pnfs_mark_request_commit and the pnfs layout
driver .mark_request_commit functions.
Signed-off-by: NTom Haynes <loghyr@primarydata.com>

so that flexfile layout client can pass in DS credential instead of
using user cred, which will be done in the next patch.
Signed-off-by: NPeng Tao <tao.peng@primarydata.com>
Signed-off-by: NTom Haynes <Thomas.Haynes@primarydata.com>

pnfs flexfile layout client may want to use NFSv3 ops rather
than the default MDS v4 ops.
Signed-off-by: NPeng Tao <tao.peng@primarydata.com>
Signed-off-by: NTom Haynes <Thomas.Haynes@primarydata.com>

Signed-off-by: NTom Haynes <loghyr@primarydata.com>

flexfile layout may need to set such when making DS connections.
Signed-off-by: NPeng Tao <tao.peng@primarydata.com>
Signed-off-by: NTom Haynes <Thomas.Haynes@primarydata.com>

The flexfiles layout wants to create DS connection over NFSv3.
Add nfs3_set_ds_client to allow that to happen.
Signed-off-by: NPeng Tao <tao.peng@primarydata.com>
Signed-off-by: NTom Haynes <Thomas.Haynes@primarydata.com>

flexfile layout may use different auth flavor as specified by MDS.
Reviewed-by: NJeff Layton <jlayton@primarydata.com>
Signed-off-by: NPeng Tao <tao.peng@primarydata.com>
Signed-off-by: NTom Haynes <Thomas.Haynes@primarydata.com>

This function call was being optimized out during nfs_fhget(), leading
to situations where we have a valid fileid but still want to use the
mounted_on_fileid.  For example, imagine we have our server configured
like this:

server % df
Filesystem      Size  Used Avail Use% Mounted on
/dev/vda1       9.1G  6.5G  1.9G  78% /
/dev/vdb1       487M  2.3M  456M   1% /exports
/dev/vdc1       487M  2.3M  456M   1% /exports/vol1
/dev/vdd1       487M  2.3M  456M   1% /exports/vol2

If our client mounts /exports and tries to do a "chown -R" across the
entire mountpoint, we will get a nasty message warning us about a circular
directory structure.  Running chown with strace tells me that each directory
has the same device and inode number:

newfstatat(AT_FDCWD, "/nfs/", {st_dev=makedev(0, 38), st_ino=2, ...}) = 0
newfstatat(4, "vol1", {st_dev=makedev(0, 38), st_ino=2, ...}) = 0
newfstatat(4, "vol2", {st_dev=makedev(0, 38), st_ino=2, ...}) = 0

With this patch the mounted_on_fileid values are used for st_ino, so the
directory loop warning isn't reported.
Signed-off-by: NAnna Schumaker <Anna.Schumaker@Netapp.com>
Signed-off-by: NTrond Myklebust <trond.myklebust@primarydata.com>

bdi_destroy already does all the work, and if we delay freeing the
anon bdev we can get away with just that single call.

Addintionally remove the call during mount failure, as
deactivate_super_locked will already call ->kill_sb and clean up
the bdi for us.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Reviewed-by: NJan Kara <jack@suse.cz>
Signed-off-by: NJens Axboe <axboe@fb.com>

I am generally against the "one big header file" approach, and
everything in the client includes this file.  Let's move all the NFS v3
declarations into a v3-only header file.
Signed-off-by: NAnna Schumaker <Anna.Schumaker@Netapp.com>
Signed-off-by: NTrond Myklebust <trond.myklebust@primarydata.com>

GFS2 and NFS have setlease routines that always just return -EINVAL.
Turn that into a generic routine that can live in fs/libfs.c.

Cc: <linux-nfs@vger.kernel.org>
Cc: Steven Whitehouse <swhiteho@redhat.com>
Cc: <cluster-devel@redhat.com>
Signed-off-by: NJeff Layton <jlayton@primarydata.com>
Acked-by: NTrond Myklebust <trond.myklebust@primarydata.com>
Reviewed-by: NChristoph Hellwig <hch@lst.de>

The usage of pid_ns->child_reaper->nsproxy->net_ns in
nfs_server_list_open and nfs_client_list_open is not safe.

/proc for a pid namespace can remain mounted after the all of the
process in that pid namespace have exited.  There are also times
before the initial process in a pid namespace has started or after the
initial process in a pid namespace has exited where
pid_ns->child_reaper can be NULL or stale.  Making the idiom
pid_ns->child_reaper->nsproxy a double whammy of problems.

Luckily all that needs to happen is to move /proc/fs/nfsfs/servers and
/proc/fs/nfsfs/volumes under /proc/net to /proc/net/nfsfs/servers and
/proc/net/nfsfs/volumes and add a symlink from the original location,
and to use seq_open_net as it has been designed.

Cc: stable@vger.kernel.org
Cc: Trond Myklebust <trond.myklebust@primarydata.com>
Cc: Stanislav Kinsbursky <skinsbursky@parallels.com>
Signed-off-by: N"Eric W. Biederman" <ebiederm@xmission.com>

It is currently not possible for various wait_on_bit functions
to implement a timeout.

While the "action" function that is called to do the waiting
could certainly use schedule_timeout(), there is no way to carry
forward the remaining timeout after a false wake-up.
As false-wakeups a clearly possible at least due to possible
hash collisions in bit_waitqueue(), this is a real problem.

The 'action' function is currently passed a pointer to the word
containing the bit being waited on.  No current action functions
use this pointer.  So changing it to something else will be a
little noisy but will have no immediate effect.

This patch changes the 'action' function to take a pointer to
the "struct wait_bit_key", which contains a pointer to the word
containing the bit so nothing is really lost.

It also adds a 'private' field to "struct wait_bit_key", which
is initialized to zero.

An action function can now implement a timeout with something
like

static int timed_out_waiter(struct wait_bit_key *key)
{
	unsigned long waited;
	if (key->private == 0) {
		key->private = jiffies;
		if (key->private == 0)
			key->private -= 1;
	}
	waited = jiffies - key->private;
	if (waited > 10 * HZ)
		return -EAGAIN;
	schedule_timeout(waited - 10 * HZ);
	return 0;
}

If any other need for context in a waiter were found it would be
easy to use ->private for some other purpose, or even extend
"struct wait_bit_key".

My particular need is to support timeouts in nfs_release_page()
to avoid deadlocks with loopback mounted NFS.

While wait_on_bit_timeout() would be a cleaner interface, it
will not meet my need.  I need the timeout to be sensitive to
the state of the connection with the server, which could change.
 So I need to use an 'action' interface.
Signed-off-by: NNeilBrown <neilb@suse.de>
Acked-by: NPeter Zijlstra <peterz@infradead.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Steve French <sfrench@samba.org>
Cc: David Howells <dhowells@redhat.com>
Cc: Steven Whitehouse <swhiteho@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: http://lkml.kernel.org/r/20140707051604.28027.41257.stgit@notabene.brownSigned-off-by: NIngo Molnar <mingo@kernel.org>

Change nfs_find_and_lock_request so nfs_page_async_flush can handle multiple
requests in a page. There is only one request for a page the first time
nfs_page_async_flush is called, but if a write or commit fails, async_flush
is called again and there may be multiple requests associated with the page.
The solution is to merge all the requests in a page group into a single
request before calling nfs_pageio_add_request.

Rename nfs_find_and_lock_request to nfs_lock_and_join_requests and
change it to first lock all requests for the page, then cancel and merge
all subrequests into the head request.
Signed-off-by: NWeston Andros Adamson <dros@primarydata.com>
Signed-off-by: NTrond Myklebust <trond.myklebust@primarydata.com>

Remove duplicate writeverf structure from merge of nfs_pgio_header and
nfs_pgio_data and remove writeverf related flags and logic to handle
more than one RPC per nfs_pgio_header.
Signed-off-by: NWeston Andros Adamson <dros@primarydata.com>
Signed-off-by: NTrond Myklebust <trond.myklebust@primarydata.com>

struct nfs_pgio_data only exists as a member of nfs_pgio_header, but is
passed around everywhere, because there used to be multiple _data structs
per _header. Many of these functions then use the _data to find a pointer
to the _header.  This patch cleans this up by merging the nfs_pgio_data
structure into nfs_pgio_header and passing nfs_pgio_header around instead.
Reviewed-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NWeston Andros Adamson <dros@primarydata.com>
Signed-off-by: NTrond Myklebust <trond.myklebust@primarydata.com>

nfs_rw_header was used to allocate an nfs_pgio_header along with an
nfs_pgio_data, because a _header would need at least one _data.

Now there is only ever one nfs_pgio_data for each nfs_pgio_header -- move
it to nfs_pgio_header and get rid of nfs_rw_header.
Reviewed-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NWeston Andros Adamson <dros@primarydata.com>
Signed-off-by: NTrond Myklebust <trond.myklebust@primarydata.com>

Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

At this point the read and write structures look identical, so combine
them into something shared by both.
Signed-off-by: NAnna Schumaker <Anna.Schumaker@Netapp.com>
Signed-off-by: NTrond Myklebust <trond.myklebust@primarydata.com>

What we have here is two functions that look identical.  Let's share
some more code!
Signed-off-by: NAnna Schumaker <Anna.Schumaker@Netapp.com>
Signed-off-by: NTrond Myklebust <trond.myklebust@primarydata.com>

Once again, these two functions look identical in the read and write
case.  Time to combine them together!
Signed-off-by: NAnna Schumaker <Anna.Schumaker@Netapp.com>
Signed-off-by: NTrond Myklebust <trond.myklebust@primarydata.com>

Most of this code is the same for both the read and write paths, so
combine everything and use the rw_ops when necessary.
Signed-off-by: NAnna Schumaker <Anna.Schumaker@Netapp.com>
Signed-off-by: NTrond Myklebust <trond.myklebust@primarydata.com>

These functions are almost identical on both the read and write side.
FLUSH_COND_STABLE will never be set for the read path, so leaving it in
the generic code won't hurt anything.
Signed-off-by: NAnna Schumaker <Anna.Schumaker@Netapp.com>
Signed-off-by: NTrond Myklebust <trond.myklebust@primarydata.com>