Skip to content

R
raspberrypi-kernel

openeuler / raspberrypi-kernel

通知 13
Star 1
Fork 0
R
raspberrypi-kernel
切换分支/标签
  1. 06 2月, 2008 1 次提交
    • D
      gpiolib: add drivers/gpio directory · a9c5fff5
      由 David Brownell 提交于 
      Add an empty drivers/gpio directory for gpiolib infrastructure and GPIO
expanders.  It will be populated by later patches.

This won't be the only place to hold such gpio_chip code.  Many external chips
add a few GPIOs as secondary functionality (such as MFD drivers) and platform
code frequently needs to closely integrate GPIO and IRQ support.

This is placed *early* in the build/link sequence since it's common for other
drivers to depend on GPIOs to do their work, so they must be initialized early
in the device_initcall() sequence.
Signed-off-by: NDavid Brownell <dbrownell@users.sourceforge.net>
Acked-by: NJean Delvare <khali@linux-fr.org>
Cc: Eric Miao <eric.miao@marvell.com>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Haavard Skinnemoen <hskinnemoen@atmel.com>
Cc: Philipp Zabel <philipp.zabel@gmail.com>
Cc: Russell King <rmk@arm.linux.org.uk>
Cc: Ben Gardner <bgardner@wabtec.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      a9c5fff5
  3. 04 2月, 2008 1 次提交
  5. 02 2月, 2008 1 次提交
  7. 31 1月, 2008 1 次提交
  9. 23 10月, 2007 2 次提交
    • R
      Virtio interface · ec3d41c4
      由 Rusty Russell 提交于 
      This attempts to implement a "virtual I/O" layer which should allow
common drivers to be efficiently used across most virtual I/O
mechanisms.  It will no-doubt need further enhancement.

The virtio drivers add buffers to virtio queues; as the buffers are consumed
the driver "interrupt" callbacks are invoked.

There is also a generic implementation of config space which drivers can query
to get setup information from the host.
Signed-off-by: NRusty Russell <rusty@rustcorp.com.au>
Cc: Dor Laor <dor.laor@qumranet.com>
Cc: Arnd Bergmann <arnd@arndb.de>
      ec3d41c4
    • R
      Consolidate host virtualization support under Virtualization menu · 9525ca02
      由 Rusty Russell 提交于 
      Move lguest under the virtualization menu.
Signed-off-by: NRusty Russell <rusty@rustcorp.com.au>
Cc: Avi Kivity <avi@qumranet.com>
      9525ca02
  11. 18 10月, 2007 1 次提交
  13. 17 10月, 2007 1 次提交
    • S
      DCA: Add Direct Cache Access driver · 7589670f
      由 Shannon Nelson 提交于 
      Direct Cache Access (DCA) is a method for warming the CPU cache before data
is used, with the intent of lessening the impact of cache misses.  This
patch adds a manager and interface for matching up client requests for DCA
services with devices that offer DCA services.

In order to use DCA, a module must do bus writes with the appropriate tag
bits set to trigger a cache read for a specific CPU.  However, different
CPUs and chipsets can require different sets of tag bits, and the methods
for determining the correct bits may be simple hardcoding or may be a
hardware specific magic incantation.  This interface is a way for DCA
clients to find the correct tag bits for the targeted CPU without needing
to know the specifics.

    [Dave Miller] use DEFINE_SPINLOCK()
Signed-off-by: NShannon Nelson <shannon.nelson@intel.com>
Acked-by: NDavid S. Miller <davem@davemloft.net>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      7589670f
  15. 11 10月, 2007 1 次提交
  17. 20 7月, 2007 2 次提交
  19. 19 7月, 2007 1 次提交
    • H
      UIO: Add the User IO core code · beafc54c
      由 Hans J. Koch 提交于 
      This interface allows the ability to write the majority of a driver in
userspace with only a very small shell of a driver in the kernel itself.
It uses a char device and sysfs to interact with a userspace process to
process interrupts and control memory accesses.

See the docbook documentation for more details on how to use this
interface.

From: Hans J. Koch <hjk@linutronix.de>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Benedikt Spranger <b.spranger@linutronix.de>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
      beafc54c
  21. 10 7月, 2007 2 次提交
    • A
      [BATTERY] Universal power supply class (was: battery class) · 4a11b59d
      由 Anton Vorontsov 提交于 
      This class is result of "external power" and "battery" classes merge,
as suggested by David Woodhouse. He also implemented uevent support.

Here how userspace seeing it now:

    	# ls /sys/class/power\ supply/
    	ac  main-battery  usb

    	# cat /sys/class/power\ supply/ac/type
    	AC

    	# cat /sys/class/power\ supply/usb/type
    	USB

    	# cat /sys/class/power\ supply/main-battery/type
    	Battery

    	# cat /sys/class/power\ supply/ac/online
    	1

    	# cat /sys/class/power\ supply/usb/online
    	0

    	# cat /sys/class/power\ supply/main-battery/status
    	Charging

    	# cat /sys/class/leds/h5400\:red-left/trigger
    	none h5400-radio timer hwtimer ac-online usb-online
    	main-battery-charging-or-full [main-battery-charging]
    	main-battery-full
Signed-off-by: NAnton Vorontsov <cbou@mail.ru>
Signed-off-by: NDavid Woodhouse <dwmw2@infradead.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
      4a11b59d
    • J
      Remove legacy CDROM drivers · f3f541f9
      由 Jens Axboe 提交于 
      They are all broken beyond repair. Given that nobody has complained
about them (most haven't worked in 2.6 AT ALL), remove them from the
tree.

A new mitsumi driver that actually works is in progress, it'll get
added when completed.
Signed-off-by: NJens Axboe <jens.axboe@oracle.com>
      f3f541f9
  23. 10 3月, 2007 2 次提交
  25. 12 2月, 2007 1 次提交
    • M
      [PATCH] drivers: add LCD support · 70e84049
      由 Miguel Ojeda Sandonis 提交于 
      Add support for auxiliary displays, the ks0108 LCD controller, the
cfag12864b LCD and adds a framebuffer device: cfag12864bfb.

- Add a "auxdisplay/" folder in "drivers/" for auxiliary display
  drivers.

- Add support for the ks0108 LCD Controller as a device driver.  (uses
  parport interface)

- Add support for the cfag12864b LCD as a device driver.  (uses ks0108
  LCD Controller driver)

- Add a framebuffer device called cfag12864bfb.  (uses cfag12864b LCD
  driver)

- Add the usual Documentation, includes, Makefiles, Kconfigs,
  MAINTAINERS, CREDITS...

- Miguel Ojeda will maintain all the stuff above.

[rdunlap@xenotime.net: workqueue fixups]
[akpm@osdl.org: kconfig fix]
Signed-off-by: NMiguel Ojeda Sandonis <maxextreme@gmail.com>
Cc: Greg KH <greg@kroah.com>
Acked-by: NPaulo Marques <pmarques@grupopie.com>
Cc: "Randy.Dunlap" <rdunlap@xenotime.net>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      70e84049
  27. 11 12月, 2006 1 次提交
    • A
      [PATCH] kvm: userspace interface · 6aa8b732
      由 Avi Kivity 提交于 
      web site: http://kvm.sourceforge.net

mailing list: kvm-devel@lists.sourceforge.net
  (http://lists.sourceforge.net/lists/listinfo/kvm-devel)

The following patchset adds a driver for Intel's hardware virtualization
extensions to the x86 architecture.  The driver adds a character device
(/dev/kvm) that exposes the virtualization capabilities to userspace.  Using
this driver, a process can run a virtual machine (a "guest") in a fully
virtualized PC containing its own virtual hard disks, network adapters, and
display.

Using this driver, one can start multiple virtual machines on a host.

Each virtual machine is a process on the host; a virtual cpu is a thread in
that process.  kill(1), nice(1), top(1) work as expected.  In effect, the
driver adds a third execution mode to the existing two: we now have kernel
mode, user mode, and guest mode.  Guest mode has its own address space mapping
guest physical memory (which is accessible to user mode by mmap()ing
/dev/kvm).  Guest mode has no access to any I/O devices; any such access is
intercepted and directed to user mode for emulation.

The driver supports i386 and x86_64 hosts and guests.  All combinations are
allowed except x86_64 guest on i386 host.  For i386 guests and hosts, both pae
and non-pae paging modes are supported.

SMP hosts and UP guests are supported.  At the moment only Intel
hardware is supported, but AMD virtualization support is being worked on.

Performance currently is non-stellar due to the naive implementation of the
mmu virtualization, which throws away most of the shadow page table entries
every context switch.  We plan to address this in two ways:

- cache shadow page tables across tlb flushes
- wait until AMD and Intel release processors with nested page tables

Currently a virtual desktop is responsive but consumes a lot of CPU.  Under
Windows I tried playing pinball and watching a few flash movies; with a recent
CPU one can hardly feel the virtualization.  Linux/X is slower, probably due
to X being in a separate process.

In addition to the driver, you need a slightly modified qemu to provide I/O
device emulation and the BIOS.

Caveats (akpm: might no longer be true):

- The Windows install currently bluescreens due to a problem with the
  virtual APIC.  We are working on a fix.  A temporary workaround is to
  use an existing image or install through qemu
- Windows 64-bit does not work.  That's also true for qemu, so it's
  probably a problem with the device model.

[bero@arklinux.org: build fix]
[simon.kagstrom@bth.se: build fix, other fixes]
[uril@qumranet.com: KVM: Expose interrupt bitmap]
[akpm@osdl.org: i386 build fix]
[mingo@elte.hu: i386 fixes]
[rdreier@cisco.com: add log levels to all printks]
[randy.dunlap@oracle.com: Fix sparse NULL and C99 struct init warnings]
[anthony@codemonkey.ws: KVM: AMD SVM: 32-bit host support]
Signed-off-by: NYaniv Kamay <yaniv@qumranet.com>
Signed-off-by: NAvi Kivity <avi@qumranet.com>
Cc: Simon Kagstrom <simon.kagstrom@bth.se>
Cc: Bernhard Rosenkraenzer <bero@arklinux.org>
Signed-off-by: NUri Lublin <uril@qumranet.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Roland Dreier <rolandd@cisco.com>
Signed-off-by: NRandy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: NAnthony Liguori <anthony@codemonkey.ws>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
      6aa8b732
  29. 09 12月, 2006 1 次提交
  31. 17 10月, 2006 1 次提交
  33. 10 8月, 2006 1 次提交
  35. 18 6月, 2006 1 次提交
  37. 22 4月, 2006 1 次提交
  39. 01 4月, 2006 1 次提交
  41. 28 3月, 2006 1 次提交
  43. 19 1月, 2006 1 次提交
  45. 14 1月, 2006 1 次提交
    • D
      [PATCH] spi: simple SPI framework · 8ae12a0d
      由 David Brownell 提交于 
      This is the core of a small SPI framework, implementing the model of a
queue of messages which complete asynchronously (with thin synchronous
wrappers on top).

  - It's still less than 2KB of ".text" (ARM).  If there's got to be a
    mid-layer for something so simple, that's the right size budget.  :)

  - The guts use board-specific SPI device tables to build the driver
    model tree.  (Hardware probing is rarely an option.)

  - This version of Kconfig includes no drivers.  At this writing there
    are two known master controller drivers (PXA/SSP, OMAP MicroWire)
    and three protocol drivers (CS8415a, ADS7846, DataFlash) with LKML
    mentions of other drivers in development.

  - No userspace API.  There are several implementations to compare.
    Implement them like any other driver, and bind them with sysfs.

The changes from last version posted to LKML (on 11-Nov-2005) are minor,
and include:

  - One bugfix (removes a FIXME), with the visible effect of making device
    names be "spiB.C" where B is the bus number and C is the chipselect.

  - The "caller provides DMA mappings" mechanism now has kerneldoc, for
    DMA drivers that want to be fancy.

  - Hey, the framework init can be subsys_init.  Even though board init
    logic fires earlier, at arch_init ... since the framework init is
    for driver support, and the board init support uses static init.

  - Various additional spec/doc clarifications based on discussions
    with other folk.  It adds a brief "thank you" at the end, for folk
    who've helped nudge this framework into existence.

As I've said before, I think that "protocol tweaking" is the main support
that this driver framework will need to evolve.

From: Mark Underwood <basicmark@yahoo.com>

  Update the SPI framework to remove a potential priority inversion case by
  reverting to kmalloc if the pre-allocated DMA-safe buffer isn't available.
Signed-off-by: NDavid Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
      8ae12a0d
  47. 12 9月, 2005 1 次提交
    • E
      [NET]: Add netlink connector. · 7672d0b5
      由 Evgeniy Polyakov 提交于 
      Kernel connector - new userspace <-> kernel space easy to use
communication module which implements easy to use bidirectional
message bus using netlink as it's backend.  Connector was created to
eliminate complex skb handling both in send and receive message bus
direction.

Connector driver adds possibility to connect various agents using as
one of it's backends netlink based network.  One must register
callback and identifier. When driver receives special netlink message
with appropriate identifier, appropriate callback will be called.

From the userspace point of view it's quite straightforward:

	socket();
	bind();
	send();
	recv();

But if kernelspace want to use full power of such connections, driver
writer must create special sockets, must know about struct sk_buff
handling...  Connector allows any kernelspace agents to use netlink
based networking for inter-process communication in a significantly
easier way:

int cn_add_callback(struct cb_id *id, char *name, void (*callback) (void *));
void cn_netlink_send(struct cn_msg *msg, u32 __groups, int gfp_mask);

struct cb_id
{
	__u32			idx;
	__u32			val;
};

idx and val are unique identifiers which must be registered in
connector.h for in-kernel usage.  void (*callback) (void *) - is a
callback function which will be called when message with above idx.val
will be received by connector core.

Using connector completely hides low-level transport layer from it's
users.

Connector uses new netlink ability to have many groups in one socket.

[ Incorporating many cleanups and fixes by myself and
  Andrew Morton -DaveM ]
Signed-off-by: NEvgeniy Polyakov <johnpol@2ka.mipt.ru>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      7672d0b5
  49. 18 8月, 2005 1 次提交
  51. 12 7月, 2005 2 次提交
  53. 22 6月, 2005 1 次提交
  55. 17 4月, 2005 1 次提交
    • L
      Linux-2.6.12-rc2 · 1da177e4
      由 Linus Torvalds 提交于 
      Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!
      1da177e4