- 15 1月, 2015 16 次提交
-
-
由 Vladimir Kondratiev 提交于
wil->status used as bitmap; use DECLARE_BITMAP for it. Signed-off-by: NVladimir Kondratiev <qca_vkondrat@qca.qualcomm.com> Signed-off-by: NKalle Valo <kvalo@codeaurora.org>
-
由 Vladimir Kondratiev 提交于
Change default to support maximum number of associated stations to an AP Signed-off-by: NHamad Kadmany <qca_hkadmany@qca.qualcomm.com> Signed-off-by: NVladimir Kondratiev <qca_vkondrat@qca.qualcomm.com> Signed-off-by: NKalle Valo <kvalo@codeaurora.org>
-
由 Vladimir Kondratiev 提交于
When encapsulating 802.3 frames into the 802.11 ones, 8-byte SNAP header added to save ethtype. SNAP is part of the frame body, thus should be counted in MSDU. So, MTU = MSDU - SNAP Signed-off-by: NVladimir Kondratiev <qca_vkondrat@qca.qualcomm.com> Signed-off-by: NKalle Valo <kvalo@codeaurora.org>
-
由 Vladimir Kondratiev 提交于
When configuring Tx/Rx VRING's, driver need to specify max. MPDU size It should take into account all overhead introduced by 802.3->208.11 transformation. Signed-off-by: NVladimir Kondratiev <qca_vkondrat@qca.qualcomm.com> Signed-off-by: NKalle Valo <kvalo@codeaurora.org>
-
由 Vladimir Kondratiev 提交于
Implement delba flow for the responder (Rx) side Signed-off-by: NVladimir Kondratiev <qca_vkondrat@qca.qualcomm.com> Signed-off-by: NKalle Valo <kvalo@codeaurora.org>
-
由 Vladimir Kondratiev 提交于
When establishing Block Ack as originator (Tx), control AMSDU flag when sending ADDBA and update status upon establishment flow completion. To be used in AMSDU flows Signed-off-by: NVladimir Kondratiev <qca_vkondrat@qca.qualcomm.com> Signed-off-by: NKalle Valo <kvalo@codeaurora.org>
-
由 Vladimir Kondratiev 提交于
When printing VRING on debugfs (file "vrings"), software head & tail indexes were printed in decimal format while hardware tail in hexadecimal only. It is not comfortable to compare indexes in different formats; on the other hand, hexadecimal output useful to see hardware glitches. To serve all purposes, print hardware tail in both decimal and hexadecimal formats. Signed-off-by: NVladimir Kondratiev <qca_vkondrat@qca.qualcomm.com> Signed-off-by: NKalle Valo <kvalo@codeaurora.org>
-
由 Vladimir Kondratiev 提交于
When disconnecting single STA in AP, it might be that STA in question is already disconnected. In this case, need to do nothing. Previously, it was mis-interpreted as "disconnect all" Signed-off-by: NVladimir Kondratiev <qca_vkondrat@qca.qualcomm.com> Signed-off-by: NKalle Valo <kvalo@codeaurora.org>
-
由 Vladimir Kondratiev 提交于
When printing debugfs for the reorder buffer, include BACK parameters: window size and timeout Signed-off-by: NVladimir Kondratiev <qca_vkondrat@qca.qualcomm.com> Signed-off-by: NKalle Valo <kvalo@codeaurora.org>
-
由 Vladimir Kondratiev 提交于
For manual ADDBA configuration, allow to set desired window size or disable automatic mechanism. Introduce module parameter (int) agg_wsize. It can be changed on run time, will be taken into account on the next connect. Interpretation: - <0 - disable automatic ADDBA; intended for manual testing through debugfs - 0 - use automatically calculated window size - >0 - use this for window size. Clipped by maximum supported by the hardware with current environment. Signed-off-by: NVladimir Kondratiev <qca_vkondrat@qca.qualcomm.com> Signed-off-by: NKalle Valo <kvalo@codeaurora.org>
-
由 Vladimir Kondratiev 提交于
Upon Tx vring creation, initiate BACK establishment with maximum possible window size. When establishing secure connection, there is EAPOL data exchange between connection itself and "data port open", where security is done and non-EAPOL data may be transferred. It is better to send EAPOL frames using normal ACK because of firmware considerations. send ADDBA only is 2 conditions met: - data port open for the corresponded STA - vring created Signed-off-by: NVladimir Kondratiev <qca_vkondrat@qca.qualcomm.com> Signed-off-by: NKalle Valo <kvalo@codeaurora.org>
-
由 Vladimir Kondratiev 提交于
Introduce BACK establishment procedures; decision logic is not implemented yet; debugfs entry 'addba' used to manually trigger addba/delba for ringid 0. debugfs usage: to establish BACK with agg_wsize 16: echo 16 > /sys/kernel/debug/ieee80211/phy0/wil6210/addba to delete BACK: echo 0 > /sys/kernel/debug/ieee80211/phy0/wil6210/addba to change agg_wsize, one need to delete BACK and establish it anew ADDBA flow for: - originator Tx side (initiator) sends WMI_VRING_BA_EN_CMDID providing agg_wsize and timeout parameters. Eventually, it gets event confirming BACK agreement - WMI_BA_STATUS_EVENTID with negotiated parameters. On this event, update Tx vring data (struct vring_tx_data) and display BACK parameters on debugfs - recipient Rx side (recipient) firmware informs driver about ADDBA with WMI_RCP_ADDBA_REQ_EVENTID, driver process it in service work queue wq_service. It adjusts parameters and sends response with WMI_RCP_ADDBA_RESP_CMDID, and final confirmation provided by firmware with WMI_ADDBA_RESP_SENT_EVENTID. In case of success, driver updates Rx BACK reorder buffer. policy for BACK parameters: - aggregation size (agg_wsize * MPDUsize)) to not exceed 64Kbytes DELBA flow for: - originator driver decides to terminate BACK, it sends WMI_VRING_BA_DIS_CMDID and updates struct vring_tx_data associated with vring; ignore WMI_DELBA_EVENTID. - recipient firmware informs driver with WMI_DELBA_EVENTID, driver deletes correspondent reorder buffer ADDBA request processing requires sending WMI command, therefore it is processed in work queue context. Same work queue used as for connect, it get renamed to wq_service Signed-off-by: NVladimir Kondratiev <qca_vkondrat@qca.qualcomm.com> Signed-off-by: NKalle Valo <kvalo@codeaurora.org>
-
由 Miaoqing Pan 提交于
Signed-off-by: NMiaoqing Pan <miaoqing@qca.qualcomm.com> Signed-off-by: NSujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: NKalle Valo <kvalo@codeaurora.org>
-
由 Miaoqing Pan 提交于
Signed-off-by: NMiaoqing Pan <miaoqing@qca.qualcomm.com> Signed-off-by: NSujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: NKalle Valo <kvalo@codeaurora.org>
-
由 Miaoqing Pan 提交于
Signed-off-by: NMiaoqing Pan <miaoqing@qca.qualcomm.com> Signed-off-by: NSujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: NKalle Valo <kvalo@codeaurora.org>
-
由 Miaoqing Pan 提交于
Signed-off-by: NMiaoqing Pan <miaoqing@qca.qualcomm.com> Signed-off-by: NSujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: NKalle Valo <kvalo@codeaurora.org>
-
- 10 1月, 2015 1 次提交
-
-
由 Kalle Valo 提交于
kbuild reported a linking error: ERROR: "devm_hwmon_device_register_with_groups" [drivers/net/wireless/ath/ath10k/ath10k_core.ko] undefined! Fix it by returning early and letting the compiler to optimise out the function call. Signed-off-by: NKalle Valo <kvalo@qca.qualcomm.com>
-
- 07 1月, 2015 2 次提交
-
-
由 Chen Gang 提交于
do_div() checks the type strictly. 'cycles_t' may be 32-bit under quite a few architectures (parisc, arm, avr32 ...). So use 'uint64_t' instead of, the related warning (with allmodconfig under parisc): CC [M] drivers/net/wireless/ath/wil6210/debugfs.o In file included from arch/parisc/include/generated/asm/div64.h:1:0, from include/linux/kernel.h:124, from include/linux/list.h:8, from include/linux/module.h:9, from drivers/net/wireless/ath/wil6210/debugfs.c:17: drivers/net/wireless/ath/wil6210/debugfs.c: In function ‘wil_vring_debugfs_show’: include/asm-generic/div64.h:43:28: warning: comparison of distinct pointer types lacks a cast (void)(((typeof((n)) *)0) == ((uint64_t *)0)); \ ^ drivers/net/wireless/ath/wil6210/debugfs.c:107:4: note: in expansion of macro ‘do_div’ do_div(idle, total); ^ In file included from include/uapi/linux/stddef.h:1:0, from include/linux/stddef.h:4, from ./include/uapi/linux/posix_types.h:4, from include/uapi/linux/types.h:13, from include/linux/types.h:5, from include/linux/list.h:4, from include/linux/module.h:9, from drivers/net/wireless/ath/wil6210/debugfs.c:17: include/asm-generic/div64.h:44:18: warning: right shift count >= width of type [-Wshift-count-overflow] if (likely(((n) >> 32) == 0)) { \ ^ include/linux/compiler.h:159:40: note: in definition of macro ‘likely’ # define likely(x) __builtin_expect(!!(x), 1) ^ drivers/net/wireless/ath/wil6210/debugfs.c:107:4: note: in expansion of macro ‘do_div’ do_div(idle, total); ^ In file included from arch/parisc/include/generated/asm/div64.h:1:0, from include/linux/kernel.h:124, from include/linux/list.h:8, from include/linux/module.h:9, from drivers/net/wireless/ath/wil6210/debugfs.c:17: include/asm-generic/div64.h:48:22: warning: passing argument 1 of ‘__div64_32’ from incompatible pointer type [-Wincompatible-pointer-types] __rem = __div64_32(&(n), __base); \ ^ drivers/net/wireless/ath/wil6210/debugfs.c:107:4: note: in expansion of macro ‘do_div’ do_div(idle, total); ^ include/asm-generic/div64.h:35:17: note: expected ‘uint64_t * {aka long long unsigned int *}’ but argument is of type ‘cycles_t * {aka long unsigned int *}’ extern uint32_t __div64_32(uint64_t *dividend, uint32_t divisor); ^ Signed-off-by: NChen Gang <gang.chen.5i5j@gmail.com> Signed-off-by: NKalle Valo <kvalo@codeaurora.org>
-
由 Wolfram Sang 提交于
This platform_driver does not need to set an owner, it will be populated by the driver core. Signed-off-by: NWolfram Sang <wsa@the-dreams.de> Signed-off-by: NKalle Valo <kvalo@codeaurora.org>
-
- 25 12月, 2014 3 次提交
-
-
由 Lorenzo Bianconi 提交于
Fix typo Signed-off-by: NLorenzo Bianconi <lorenzo.bianconi83@gmail.com> Signed-off-by: NKalle Valo <kvalo@codeaurora.org>
-
由 Lorenzo Bianconi 提交于
Add tpc entry to ath9k debugfs in order to enable/disable hw TPC Signed-off-by: NLorenzo Bianconi <lorenzo.bianconi83@gmail.com> Signed-off-by: NKalle Valo <kvalo@codeaurora.org>
-
由 Lorenzo Bianconi 提交于
Enable hw TPC by default on AR9003 based chips Signed-off-by: NLorenzo Bianconi <lorenzo.bianconi83@gmail.com> Signed-off-by: NKalle Valo <kvalo@codeaurora.org>
-
- 24 12月, 2014 1 次提交
-
-
由 Peter Oh 提交于
The minimum number of pulses per burst on FCC radar type 5 is 1. Use this number for correct radar detection. Signed-off-by: NPeter Oh <poh@qca.qualcomm.com> Signed-off-by: NKalle Valo <kvalo@codeaurora.org>
-
- 23 12月, 2014 11 次提交
-
-
由 Peter Oh 提交于
phymode should use 11b only if NO_OFDM flags is set. Hence check up channel flag for NO_OFDM and set to 11b. Signed-off-by: NPeter Oh <poh@qca.qualcomm.com> Signed-off-by: NKalle Valo <kvalo@qca.qualcomm.com>
-
由 Janusz Dziedzic 提交于
Assoc peer command contain information about NSS. When we will get IEEE80211_RC_NSS_CHANGED we should also send (re) assoc peer command to be sure firmware will know about it and RC will work correctly. This was found during code review. Signed-off-by: NJanusz Dziedzic <janusz.dziedzic@tieto.com> Signed-off-by: NKalle Valo <kvalo@qca.qualcomm.com>
-
由 Janusz Dziedzic 提交于
This fix TX problem when IBSS used in HT mode. Before we used 6Mbps all the time for TX direction. Reported-by: NYeoh Chun-Yeow <yeohchunyeow@gmail.com> Signed-off-by: NJanusz Dziedzic <janusz.dziedzic@tieto.com> Signed-off-by: NKalle Valo <kvalo@qca.qualcomm.com>
-
由 Rajkumar Manoharan 提交于
Temperature sensor generates electrical analog voltage from temperature of each chain. The analog voltage is converted to digital value through ADC. For reading temperature values fom user space, hw monitoring device is used. Whenever the user requests for current temperature, the driver sends WMI command and wait for response. For reading temperature, cat /sys/class/ieee80211/phy*/device/hwmon/hwmon2/temp1_input Signed-off-by: NRajkumar Manoharan <rmanohar@qti.qualcomm.com> Signed-off-by: NKalle Valo <kvalo@qca.qualcomm.com>
-
由 Rajkumar Manoharan 提交于
Add WMI command support for reading temperature from the target and corresponding WMI temperature event handler. The pdev_get_temperature command is currently supported in 10.2 firmware alone. Signed-off-by: NRajkumar Manoharan <rmanohar@qti.qualcomm.com> Signed-off-by: NKalle Valo <kvalo@qca.qualcomm.com>
-
由 Rajkumar Manoharan 提交于
Thermal cooling device support is added to control the temperature by throttling the data transmission for the given duration. Throttling is done using hw MAC quiet time setting. Period, duration and offset from TBTT can be set up to quiet the MAC transmits for the required duty cycle (% of quiet duration). The thermal device allows user to configure duty cycle. The quiet params are derived as follows. period = max(25TU, beacon interval / number of bss) duration = period * duty cycle / 100 Quiet mode can be disabled by setting the duty cycle to 0. The cooling device can be found under /sys/class/thermal/cooling_deviceX/. Corresponding soft link to this device can be found under phy folder. /sys/class/ieee80211/phy*/device/cooling_device. To set duty cycle as 40%, echo 40 >/sys/class/ieee80211/phy*/device/cooling_device/cur_state Signed-off-by: NRajkumar Manoharan <rmanohar@qti.qualcomm.com> Signed-off-by: NKalle Valo <kvalo@qca.qualcomm.com>
-
由 Rajkumar Manoharan 提交于
Add WMI support to send pdev_set_quiet_mode command to target. This will be used for thermal mitigation purpose. Signed-off-by: NRajkumar Manoharan <rmanohar@qti.qualcomm.com> Signed-off-by: NKalle Valo <kvalo@qca.qualcomm.com>
-
由 Rajkumar Manoharan 提交于
10.2.4 firmware uses bitmask in wmi_resource_config to configure 10.2 firmware features like airtime fairness and rx batch mode instead of maintaining separete bool entry. This allows new features that can be configure during init time without breaking backward compatibility. kvalo: use WMI op version, bump up FW API to 4 to not break older versions of ath10k Signed-off-by: NRajkumar Manoharan <rmanohar@qti.qualcomm.com> Signed-off-by: NKalle Valo <kvalo@qca.qualcomm.com>
-
由 Kalle Valo 提交于
The internal firmware version doesn't tell much to the user, it's more informative to use that field to print the wmi op version. Signed-off-by: NKalle Valo <kvalo@qca.qualcomm.com>
-
由 Kalle Valo 提交于
ATH10K_FW_FEATURE_WMI_10X should not be used for anymore as that's now deprecated, instead use wmi op version. Signed-off-by: NKalle Valo <kvalo@qca.qualcomm.com>
-
由 Kalle Valo 提交于
To make it easier to manage firmware differences, we should not use ATH10K_FW_FEATURE_WMI_10X outside ath10k_core_init_firmware_features(). To achieve that create new field ar->max_num_vdevs and set it based on wmi op version. Signed-off-by: NKalle Valo <kvalo@qca.qualcomm.com>
-
- 16 12月, 2014 6 次提交
-
-
由 Michal Kazior 提交于
Firmware doesn't allow precise tx rate control so P2P wasn't entirely spec compliant (it was using CCK rates in some cases). The only way to make sure firmware doesn't use CCK rates is to have a vdev with P2P subtype used for scanning and tx. This can be done via a special dedicated P2P device interface support. This also removes the ancient hack from ath10k in favor of p2pdev. Signed-off-by: NMichal Kazior <michal.kazior@tieto.com> Signed-off-by: NKalle Valo <kvalo@qca.qualcomm.com>
-
由 Michal Kazior 提交于
Per-vif bss_conf.ps should be used to configure powersave. Signed-off-by: NMichal Kazior <michal.kazior@tieto.com> Signed-off-by: NKalle Valo <kvalo@qca.qualcomm.com>
-
由 Michal Kazior 提交于
Setting 0 ps timeout to firmware yields very poor latency and traffic issues. This is the case when multi-vif is active. Signed-off-by: NMichal Kazior <michal.kazior@tieto.com> Signed-off-by: NKalle Valo <kvalo@qca.qualcomm.com>
-
由 Michal Kazior 提交于
To comply with WMM-PS the device shouldn't wake up with a NullFunc frame pair when tx-ing. Instead PM bit on each tx frame should be used. To make this work correctly firmware needs to be told to use a different STA PS wake threshold when u-APSD is enabled. Signed-off-by: NMichal Kazior <michal.kazior@tieto.com> Signed-off-by: NKalle Valo <kvalo@qca.qualcomm.com>
-
由 Michal Kazior 提交于
Some firmware revisions need peer phymode to be specified as MODE_11B when associating as station to a 11b AP. Otherwise they can starve other stations. Signed-off-by: NMichal Kazior <michal.kazior@tieto.com> Signed-off-by: NKalle Valo <kvalo@qca.qualcomm.com>
-
由 Peter Oh 提交于
Setting fragmentation threshold has not been supported by any of firmware versions, hence unregister the callback and remove the function. Signed-off-by: NPeter Oh <poh@qca.qualcomm.com> Signed-off-by: NKalle Valo <kvalo@qca.qualcomm.com>
-