This is a direct port of the raid5 patch.
Signed-off-by: NNeil Brown <neilb@cse.unsw.edu.au>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Most awkward part of this is delaying write requests until bitmap updates have
been flushed.

To achieve this, we have a sequence number (seq_flush) which is incremented
each time the raid5 is unplugged.

If the raid thread notices that this has changed, it flushes bitmap changes,
and assigned the value of seq_flush to seq_write.

When a write request arrives, it is given the number from seq_write, and that
write request may not complete until seq_flush is larger than the saved seq
number.

We have a new queue for storing stripes which are waiting for a bitmap flush
and an extra flag for stripes to record if the write was 'degraded' and so
should not clear the a bit in the bitmap.
Signed-off-by: NNeil Brown <neilb@cse.unsw.edu.au>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

version-1 superblocks are not (normally) 4K long, and can be of variable size.
 Writing the full 4K can cause corruption (but only in non-default
configurations).

With this patch the super-block-flavour can choose a size to read, and set a
size to write based on what it finds.
Signed-off-by: NNeil Brown <neilb@cse.unsw.edu.au>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

These inlines haven't been used for ages, they should go.
Signed-off-by: NNeil Brown <neilb@cse.unsw.edu.au>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

read_sb_page() assumed that if sync_page_io fails, the device would be marked
faultly.  However it isn't.  So in the face of error, read_sb_page would loop
forever.

Redo the logic so that this cannot happen.
Signed-off-by: NNeil Brown <neilb@cse.unsw.edu.au>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

As this is used to flag an internal bitmap.

Also, introduce symbolic names for feature bits.
Signed-off-by: NNeil Brown <neilb@cse.unsw.edu.au>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

It is possibly (and occasionally useful) to have a raid1 without persistent
superblocks.  The code in add_new_disk for adding a device to such an array
always tries to read a superblock.

This will obviously fail.

So do the appropriate test and call md_import_device with
appropriate args.
Signed-off-by: NNeil Brown <neilb@cse.unsw.edu.au>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

When hot-adding a bitmap, bitmap_daemon_work could get called while the bitmap
is being created, so don't set mddev->bitmap until the bitmap is ready.

This requires freeing the bitmap inside bitmap_create if creation failed
part-way through.
Signed-off-by: NNeil Brown <neilb@cse.unsw.edu.au>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

The 'lastrun' time wasn't being initialised, so it could be half a
jiffie-cycle before it seemed to be time to do work again.
Signed-off-by: NNeil Brown <neilb@cse.unsw.edu.au>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

A state of 0 mean 'not quiesced'
A state of 1 means 'is quiesced'

The original code got this wrong.
Signed-off-by: NNeil Brown <neilb@cse.unsw.edu.au>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

linear currently uses division by the size of the smallest componenet device
to find which device a request goes to.  If that smallest device is larger
than 2 terabytes, then the division will not work on some systems.

So we introduce a pre-shift, and take care not to make the hash table too
large, much like the code in raid0.

Also get rid of conf->nr_zones, which is not needed.
Signed-off-by: NNeil Brown <neilb@cse.unsw.edu.au>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

If a device is flagged 'WriteMostly' and the array has a bitmap, and the
bitmap superblock indicates that write_behind is allowed, then write_behind is
enabled for WriteMostly devices.

Write requests will be acknowledges as complete to the caller (via b_end_io)
when all non-WriteMostly devices have completed the write, but will not be
cleared from the bitmap until all devices complete.

This requires memory allocation to make a local copy of the data being
written.  If there is insufficient memory, then we fall-back on normal write
semantics.
Signed-Off-By: NPaul Clements <paul.clements@steeleye.com>
Signed-off-by: NNeil Brown <neilb@cse.unsw.edu.au>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

This allows a device in a raid1 to be marked as "write mostly".  Read requests
will only be sent if there is no other option.
Signed-off-by: NNeil Brown <neilb@cse.unsw.edu.au>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Both file-bitmaps and superblock bitmaps are supported.

If you add a bitmap file on the array device, you lose.

This introduces a 'default_bitmap_offset' field in mddev, as the ioctl used
for adding a superblock bitmap doesn't have room for giving an offset.  Later,
this value will be setable via sysfs.
Signed-off-by: NNeil Brown <neilb@cse.unsw.edu.au>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

When we find a 'stale' bitmap, possibly because it is new, we should just
assume every bit needs to be set, but rather base the setting of bits on the
current state of the array (degraded and recovery_cp).
Signed-off-by: NNeil Brown <neilb@cse.unsw.edu.au>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

... otherwise we loose a reference and can never free the file.
Signed-off-by: NNeil Brown <neilb@cse.unsw.edu.au>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Fix another bug in dm-raid1.c that the dirty region may stay in or be moved
to clean list and freed while in use.

It happens as follows:

   CPU0                                   CPU1
   ------------------------------------------------------------------------------
   rh_dec()
     if (atomic_dec_and_test(pending))
        <the region is still marked dirty>
                                          rh_inc()
                                            if the region is clean
                                               mark the region dirty
                                               and remove from clean list
        mark the region clean
        and move to clean list
                                                  atomic_inc(pending)

At this stage, the region is in clean list and will be mistakenly reclaimed
by rh_update_states() later.
Signed-off-by: NJun'ichi Nomura <j-nomura@ce.jp.nec.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

md does not yet support BIO_RW_BARRIER, so be honest about it and fail
(-EOPNOTSUPP) any such requests.
Signed-off-by: NNeil Brown <neilb@cse.unsw.edu.au>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

'this_sector' is a virtual (array) address while 'head_position' is a physical
(device) address, so substraction doesn't make any sense.  devs[slot].addr
should be used instead of this_sector.

However, this patch doesn't make much practical different to the read
balancing due to the effects of later code.
Signed-off-by: NNeil Brown <neilb@cse.unsw.edu.au>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Don't just irritate all other kernel developers.  Fix the users first,
then you can re-introduce the must-check infrastructure to avoid new
cases creeping in.
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Fix up fs/compat.c fixes.

This fixes the problem with "Averatec 6240 pcmcia_socket0: unable to
apply power", which was due to the CardBus IOMEM register region being
allocated at an address that was actually inside the RAM window that had
been reserved for video frame-buffers in an UMA setup.

The BIOS _should_ have marked that region reserved in the e820 memory
descriptor tables, but did not.

It is fixed by rounding up the default starting address of PCI memory
allocations, so that we leave a bigger gap after the final known memory
location.  The amount of rounding depends on how big the unused memory
gap is that we can allocate IOMEM from.

Based on example code by Linus.
Acked-by: NGreg KH <greg@kroah.com>
Acked-by: NIvan Kokshaysky <ink@jurassic.park.msu.ru>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Andrew lost this in patch reject resolution, and never noticed, since
the compat code isn't in use on x86.
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

This patch adds lost sockfd_put() in 32bit compat rounting_ioctl() on
64bit platforms
Signed-Off-By: NKirill Korotaev <dev@sw.ru>
Signed-Off-By: NMaxim Giryaev <gem@sw.ru>
Signed-off-By: NLinus Torvalds <torvalds@osdl.org>

This adds a lost fput in 32bit tiocgdev ioctl on x86-64

[ chrisw: Updated to use fget_light/fput_light ]
Signed-Off-By: NKirill Korotaev <dev@sw.ru>
Signed-Off-By: NMaxim Giryaev <gem@sw.ru>
Signed-off-by: NChris Wright <chrisw@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

um has it own set of files for asm-offsets. So for now the
gen-asm-offset macro is just duplicated in the um Makefile.

This may well be the final solution since um is a bit special compared
to other architectures - time will tell.

Also added a dummy arch/um/kernel/asm-offsets.h file to keep kbuild happy.
Signed-off-by: NSam Ravnborg <sam@ravnborg.org>

Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

This converts the final 20 DEFINE_SPINLOCK holdouts.  (another 580 places
are already using DEFINE_SPINLOCK).  Build tested on x86.
Signed-off-by: NIngo Molnar <mingo@elte.hu>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Clean up timer initialization by introducing DEFINE_TIMER a'la
DEFINE_SPINLOCK.  Build and boot-tested on x86.  A similar patch has been
been in the -RT tree for some time.
Signed-off-by: NIngo Molnar <mingo@elte.hu>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

This patch removes ability to interrupt and restart operations while there
hasn't been any side-effect.

The reason: applications.  There are some apps it seems that generate
signals at a fast rate.  This means, that if the operation cannot make
enough progress between two signals, it will be restarted for ever.  This
bug actually manifested itself with 'krusader' trying to open a file for
writing under sshfs.  Thanks to Eduard Czimbalmos for the report.

The problem can be solved just by making open() uninterruptible, because in
this case it was the truncate operation that slowed down the progress.  But
it's better to solve this by simply not allowing interrupts at all (except
SIGKILL), because applications don't expect file operations to be
interruptible anyway.  As an added bonus the code is simplified somewhat.
Signed-off-by: NMiklos Szeredi <miklos@szeredi.hu>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

This patch adds a new FSYNCDIR request, which is sent when fsync is called
on directories.  This operation is available in libfuse 2.3-pre1 or
greater.
Signed-off-by: NMiklos Szeredi <miklos@szeredi.hu>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Don't change mtime/ctime/atime to local time on read/write.  Rather invalidate
file attributes, so next stat() will force a GETATTR call.  Bug reported by
Ben Grimm.
Signed-off-by: NMiklos Szeredi <miklos@szeredi.hu>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Make data caching behavior selectable on a per-open basis instead of
per-mount.  Compatibility for the old mount options 'kernel_cache' and
'direct_io' is retained in the userspace library (version 2.4.0-pre1 or
later).
Signed-off-by: NMiklos Szeredi <miklos@szeredi.hu>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>