- 10 2月, 2016 21 次提交
-
-
由 Sven Eckelmann 提交于
batman-adv uses a self-written reference implementation which is just based on atomic_t. This is less obvious when reading the code than kref and therefore increases the change that the reference counting will be missed. Signed-off-by: NSven Eckelmann <sven@narfation.org> Signed-off-by: NMarek Lindner <mareklindner@neomailbox.ch> Signed-off-by: NAntonio Quartulli <a@unstable.cc>
-
由 Sven Eckelmann 提交于
batman-adv uses a self-written reference implementation which is just based on atomic_t. This is less obvious when reading the code than kref and therefore increases the change that the reference counting will be missed. Signed-off-by: NSven Eckelmann <sven@narfation.org> Signed-off-by: NMarek Lindner <mareklindner@neomailbox.ch> Signed-off-by: NAntonio Quartulli <a@unstable.cc>
-
由 Sven Eckelmann 提交于
batman-adv uses a self-written reference implementation which is just based on atomic_t. This is less obvious when reading the code than kref and therefore increases the change that the reference counting will be missed. Signed-off-by: NSven Eckelmann <sven@narfation.org> Signed-off-by: NMarek Lindner <mareklindner@neomailbox.ch> Signed-off-by: NAntonio Quartulli <a@unstable.cc>
-
由 Sven Eckelmann 提交于
batman-adv uses a self-written reference implementation which is just based on atomic_t. This is less obvious when reading the code than kref and therefore increases the change that the reference counting will be missed. Signed-off-by: NSven Eckelmann <sven@narfation.org> Signed-off-by: NMarek Lindner <mareklindner@neomailbox.ch> Signed-off-by: NAntonio Quartulli <a@unstable.cc>
-
由 Sven Eckelmann 提交于
batman-adv uses a self-written reference implementation which is just based on atomic_t. This is less obvious when reading the code than kref and therefore increases the change that the reference counting will be missed. Signed-off-by: NSven Eckelmann <sven@narfation.org> Signed-off-by: NMarek Lindner <mareklindner@neomailbox.ch> Signed-off-by: NAntonio Quartulli <a@unstable.cc>
-
由 Sven Eckelmann 提交于
batman-adv uses a self-written reference implementation which is just based on atomic_t. This is less obvious when reading the code than kref and therefore increases the change that the reference counting will be missed. Signed-off-by: NSven Eckelmann <sven@narfation.org> Signed-off-by: NMarek Lindner <mareklindner@neomailbox.ch> Signed-off-by: NAntonio Quartulli <a@unstable.cc>
-
由 Sven Eckelmann 提交于
batman-adv uses a self-written reference implementation which is just based on atomic_t. This is less obvious when reading the code than kref and therefore increases the change that the reference counting will be missed. Signed-off-by: NSven Eckelmann <sven@narfation.org> Signed-off-by: NMarek Lindner <mareklindner@neomailbox.ch> Signed-off-by: NAntonio Quartulli <a@unstable.cc>
-
由 Sven Eckelmann 提交于
batman-adv uses a self-written reference implementation which is just based on atomic_t. This is less obvious when reading the code than kref and therefore increases the change that the reference counting will be missed. Signed-off-by: NSven Eckelmann <sven@narfation.org> Signed-off-by: NMarek Lindner <mareklindner@neomailbox.ch> Signed-off-by: NAntonio Quartulli <a@unstable.cc>
-
由 Sven Eckelmann 提交于
batman-adv uses a self-written reference implementation which is just based on atomic_t. This is less obvious when reading the code than kref and therefore increases the change that the reference counting will be missed. Signed-off-by: NSven Eckelmann <sven@narfation.org> Signed-off-by: NMarek Lindner <mareklindner@neomailbox.ch> Signed-off-by: NAntonio Quartulli <a@unstable.cc>
-
由 Sven Eckelmann 提交于
batman-adv uses a self-written reference implementation which is just based on atomic_t. This is less obvious when reading the code than kref and therefore increases the change that the reference counting will be missed. Signed-off-by: NSven Eckelmann <sven@narfation.org> Signed-off-by: NMarek Lindner <mareklindner@neomailbox.ch> Signed-off-by: NAntonio Quartulli <a@unstable.cc>
-
由 Sven Eckelmann 提交于
batman-adv uses a self-written reference implementation which is just based on atomic_t. This is less obvious when reading the code than kref and therefore increases the change that the reference counting will be missed. Signed-off-by: NSven Eckelmann <sven@narfation.org> Signed-off-by: NMarek Lindner <mareklindner@neomailbox.ch> Signed-off-by: NAntonio Quartulli <a@unstable.cc>
-
由 Sven Eckelmann 提交于
batman-adv uses a self-written reference implementation which is just based on atomic_t. This is less obvious when reading the code than kref and therefore increases the change that the reference counting will be missed. Signed-off-by: NSven Eckelmann <sven@narfation.org> Signed-off-by: NMarek Lindner <mareklindner@neomailbox.ch> Signed-off-by: NAntonio Quartulli <a@unstable.cc>
-
由 Sven Eckelmann 提交于
batman-adv uses a self-written reference implementation which is just based on atomic_t. This is less obvious when reading the code than kref and therefore increases the change that the reference counting will be missed. Signed-off-by: NSven Eckelmann <sven@narfation.org> Signed-off-by: NMarek Lindner <mareklindner@neomailbox.ch> Signed-off-by: NAntonio Quartulli <a@unstable.cc>
-
由 Sven Eckelmann 提交于
batman-adv uses a self-written reference implementation which is just based on atomic_t. This is less obvious when reading the code than kref and therefore increases the change that the reference counting will be missed. Signed-off-by: NSven Eckelmann <sven@narfation.org> Signed-off-by: NMarek Lindner <mareklindner@neomailbox.ch> Signed-off-by: NAntonio Quartulli <a@unstable.cc>
-
由 Sven Eckelmann 提交于
batman-adv uses a self-written reference implementation which is just based on atomic_t. This is less obvious when reading the code than kref and therefore increases the change that the reference counting will be missed. Signed-off-by: NSven Eckelmann <sven@narfation.org> Signed-off-by: NMarek Lindner <mareklindner@neomailbox.ch> Signed-off-by: NAntonio Quartulli <a@unstable.cc>
-
由 Sven Eckelmann 提交于
batman-adv uses a self-written reference implementation which is just based on atomic_t. This is less obvious when reading the code than kref and therefore increases the change that the reference counting will be missed. Signed-off-by: NSven Eckelmann <sven@narfation.org> Signed-off-by: NMarek Lindner <mareklindner@neomailbox.ch> Signed-off-by: NAntonio Quartulli <a@unstable.cc>
-
由 Sven Eckelmann 提交于
batman-adv uses a self-written reference implementation which is just based on atomic_t. This is less obvious when reading the code than kref and therefore increases the change that the reference counting will be missed. Signed-off-by: NSven Eckelmann <sven@narfation.org> Signed-off-by: NMarek Lindner <mareklindner@neomailbox.ch> Signed-off-by: NAntonio Quartulli <a@unstable.cc>
-
由 Sven Eckelmann 提交于
batman-adv uses a self-written reference implementation which is just based on atomic_t. This is less obvious when reading the code than kref and therefore increases the change that the reference counting will be missed. Signed-off-by: NSven Eckelmann <sven@narfation.org> Signed-off-by: NMarek Lindner <mareklindner@neomailbox.ch> Signed-off-by: NAntonio Quartulli <a@unstable.cc>
-
由 Sven Eckelmann 提交于
The batadv_tvlv_container* functions state in their kernel-doc that they require tvlv.container_list_lock. Add an assert to automatically detect when this might have been ignored by the caller. Signed-off-by: NSven Eckelmann <sven@narfation.org> Signed-off-by: NMarek Lindner <mareklindner@neomailbox.ch> Signed-off-by: NAntonio Quartulli <a@unstable.cc>
-
由 Simon Wunderlich 提交于
To allow future use of the window protected function with different maximum sequence numbers, add a parameter to set this value which was previously hardcoded. Another parameter added for future use is a flag to return whether the protection window has started. While at it, also fix the kerneldoc. Signed-off-by: NSimon Wunderlich <simon@open-mesh.com> Signed-off-by: NMarek Lindner <mareklindner@neomailbox.ch> Signed-off-by: NAntonio Quartulli <a@unstable.cc>
-
由 Sven Eckelmann 提交于
The references to the network device should be dropped inside the release function for batadv_hard_iface similar to what is done with the batman-adv internal datastructures. Signed-off-by: NSven Eckelmann <sven@narfation.org> Signed-off-by: NMarek Lindner <mareklindner@neomailbox.ch> Signed-off-by: NAntonio Quartulli <a@unstable.cc>
-
- 09 2月, 2016 6 次提交
-
-
由 Willem de Bruijn 提交于
Support socket option PACKET_VNET_HDR together with PACKET_TX_RING. When enabled, a struct virtio_net_hdr is expected to precede the data in the ring. The vnet option must be set before the ring is created. The implementation reuses the existing skb_copy_bits code that is used when dev->hard_header_len is non-zero. Move this ll_header check to before the skb alloc and combine it with a test for vnet_hdr->hdr_len. Allocate and copy the max of the two. Verified with test program at github.com/wdebruij/kerneltools/blob/master/tests/psock_txring_vnet.c Signed-off-by: NWillem de Bruijn <willemb@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Willem de Bruijn 提交于
GSO packet headers must be stored in the linear skb segment. Move tpacket header parsing before sock_alloc_send_skb. The GSO follow-on patch will later increase the skb linear argument to sock_alloc_send_skb if needed for large packets. The header parsing code does not require an allocated skb, so is safe to move. Later pass to tpacket_fill_skb the computed data start and length. Signed-off-by: NWillem de Bruijn <willemb@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Willem de Bruijn 提交于
Support socket option PACKET_VNET_HDR together with PACKET_RX_RING. When enabled, a struct virtio_net_hdr will precede the data in the packet ring slots. Verified with test program at github.com/wdebruij/kerneltools/blob/master/tests/psock_rxring_vnet.c pkt: 1454269209.798420 len=5066 vnet: gso_type=tcpv4 gso_size=1448 hlen=66 ecn=off csum: start=34 off=16 eth: proto=0x800 ip: src=<masked> dst=<masked> proto=6 len=5052 Signed-off-by: NWillem de Bruijn <willemb@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Willem de Bruijn 提交于
packet_snd and packet_rcv support virtio net headers for GSO. Move this logic into helper functions to be able to reuse it in tpacket_snd and tpacket_rcv. This is a straighforward code move with one exception. Instead of creating and passing a separate gso_type variable, reuse vnet_hdr.gso_type after conversion from virtio to kernel gso type. Signed-off-by: NWillem de Bruijn <willemb@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Elad Raz 提交于
Passing the port-group to br_mdb in order to allow direct access to the structure. br_mdb will later use the structure to reflect HW reflection status via "state" variable. Signed-off-by: NElad Raz <eladr@mellanox.com> Signed-off-by: NJiri Pirko <jiri@mellanox.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Elad Raz 提交于
Change net_bridge_port_group 'state' member to 'flags' and define new set of flags internal to the kernel. Signed-off-by: NElad Raz <eladr@mellanox.com> Signed-off-by: NJiri Pirko <jiri@mellanox.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 08 2月, 2016 13 次提交
-
-
由 David S. Miller 提交于
Unintentionally the default was changed to zero, fix that. Fixes: 12ed8244 ("ipv4: Namespaceify tcp syncookies sysctl knob") Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Nikolay Borisov 提交于
Signed-off-by: NNikolay Borisov <kernel@kyup.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Nikolay Borisov 提交于
Signed-off-by: NNikolay Borisov <kernel@kyup.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Nikolay Borisov 提交于
Signed-off-by: NNikolay Borisov <kernel@kyup.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Nikolay Borisov 提交于
Signed-off-by: NNikolay Borisov <kernel@kyup.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Nikolay Borisov 提交于
Signed-off-by: NNikolay Borisov <kernel@kyup.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Nikolay Borisov 提交于
Signed-off-by: NNikolay Borisov <kernel@kyup.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Nikolay Borisov 提交于
Signed-off-by: NNikolay Borisov <kernel@kyup.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Nikolay Borisov 提交于
Signed-off-by: NNikolay Borisov <kernel@kyup.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Nikolay Borisov 提交于
Signed-off-by: NNikolay Borisov <kernel@kyup.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Yuchung Cheng 提交于
Refactor and consolidate cwnd and rate updates into a new function tcp_cong_control(). Signed-off-by: NYuchung Cheng <ycheng@google.com> Signed-off-by: NNeal Cardwell <ncardwell@google.com> Signed-off-by: NEric Dumazet <ncardwell@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Yuchung Cheng 提交于
This change enables congestion control to update cwnd based on not only packet cumulatively acked but also packets delivered out-of-order. This makes congestion control robust against packet reordering because it may raise cwnd as long as packets are being delivered once reordering has been detected (i.e., it only cares the amount of packets delivered, not the ordering among them). Signed-off-by: NYuchung Cheng <ycheng@google.com> Signed-off-by: NNeal Cardwell <ncardwell@google.com> Signed-off-by: NEric Dumazet <ncardwell@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Yuchung Cheng 提交于
A small refactoring that gets number of packets cumulatively acked from tcp_clean_rtx_queue() directly. Signed-off-by: NYuchung Cheng <ycheng@google.com> Signed-off-by: NNeal Cardwell <ncardwell@google.com> Signed-off-by: NEric Dumazet <ncardwell@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-