We currently enable PCI bridges after scanning a bus and assigning
resources.  This is often done in arch code.

This patch changes this so we don't enable a bridge until necessary, i.e.,
until we enable a PCI device behind the bridge.  We do this in the generic
pci_enable_device() path, so this also removes the arch-specific code to
enable bridges.

[bhelgaas: changelog]
Signed-off-by: NYinghai Lu <yinghai@kernel.org>
Signed-off-by: NBjorn Helgaas <bhelgaas@google.com>

Previously, we did resource assignment globally.  This patch splits up
pci_assign_unassigned_resources() so assignment is done for each root bus
in turn.  We check each root bus individually to see whether it needs any
reassignment, and if it does, we assign resources for just that bus.

[bhelgaas: changelog]
Signed-off-by: NYinghai Lu <yinghai@kernel.org>
Signed-off-by: NBjorn Helgaas <bhelgaas@google.com>

pci_realloc_detect() turns on automatic resource allocation when it finds
unassigned SR-IOV resources.  Previously it did this on a global basis, so
we enabled reallocation if any PCI device anywhere had an unassigned SR-IOV
resource.

This patch changes pci_realloc_detect() so it looks at a single bus, so we
can do this when a host bridge is hot-added.

[bhelgaas: changelog]
Signed-off-by: NYinghai Lu <yinghai@kernel.org>
Signed-off-by: NBjorn Helgaas <bhelgaas@google.com>

Previously we did not turn on automatic PCI resource reallocation for
unassigned IOV resources behind a host bridge with address offset.  This
patch fixes that bug.

The intent was that "!r->start" would check for a BAR containing zero.  But
that check is incorrect for host bridges that apply an offset, because in
that case the resource address is not the same as the bus address.

This patch fixes that by converting the resource address back to a bus
address before checking for zero.

[bhelgaas: changelog]
Suggested-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: NYinghai Lu <yinghai@kernel.org>
Signed-off-by: NBjorn Helgaas <bhelgaas@google.com>

When CONFIG_PCI_REALLOC_ENABLE_AUTO=y, pci_realloc_detect() looks at PCI
devices to see if any have SR-IOV resources that need to be assigned.  If
it finds any, it turns on automatic resource reallocation.

This patch changes pci_realloc_detect() so it uses pci_walk_bus() on
each root bus instead of using for_each_pci_dev().  This is a step
toward doing reallocation on a per-bus basis, so we can do it for
a hot-added host bridge.

[bhelgaas: changelog, rename callback to iov_resources_unassigned(), use
boolean for "unassigned"]
Signed-off-by: NYinghai Lu <yinghai@kernel.org>
Signed-off-by: NBjorn Helgaas <bhelgaas@google.com>

Drop the "bus" temporary variable.  No functional change, but simplifies
later patch slightly.

[bhelgaas: changelog, make same change in
pci_assign_unassigned_bridge_resources() to keep it parallel with
pci_assign_unassigned_resources()]
Signed-off-by: NYinghai Lu <yinghai@kernel.org>
Signed-off-by: NBjorn Helgaas <bhelgaas@google.com>

The zcrypt device driver has been split into base/bus module, api-module,
card modules and message type modules. The base module has been renamed
from z90crypt to ap.
A module alias (with the well-known z90crypt identifier) will be introduced
that enable users to use their existing way to load the zcrypt device driver.
Signed-off-by: NIngo Tuchscherer <ingo.tuchscherer@linux.vnet.ibm.com>
Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>

We try to linearize part of the skb when the number of iov is greater than
MAX_SKB_FRAGS. This is not enough since each single vector may occupy more than
one pages, so zerocopy_sg_fromiovec() may still fail and may break the guest
network.

Solve this problem by calculate the pages needed for iov before trying to do
zerocopy and switch to use copy instead of zerocopy if it needs more than
MAX_SKB_FRAGS.

This is done through introducing a new helper to count the pages for iov, and
call uarg->callback() manually when switching from zerocopy to copy to notify
vhost.

We can do further optimization on top.

This bug were introduced from b92946e2
(macvtap: zerocopy: validate vectors before building skb).

Cc: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: NJason Wang <jasowang@redhat.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

We try to linearize part of the skb when the number of iov is greater than
MAX_SKB_FRAGS. This is not enough since each single vector may occupy more than
one pages, so zerocopy_sg_fromiovec() may still fail and may break the guest
network.

Solve this problem by calculate the pages needed for iov before trying to do
zerocopy and switch to use copy instead of zerocopy if it needs more than
MAX_SKB_FRAGS.

This is done through introducing a new helper to count the pages for iov, and
call uarg->callback() manually when switching from zerocopy to copy to notify
vhost.

We can do further optimization on top.

The bug were introduced from commit 0690899b
(tun: experimental zero copy tx support)

Cc: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: NJason Wang <jasowang@redhat.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The BIOS of FUjitsu E753 reports an incorrect initial backlight value
for WIN8 compatible OS, causing backlight to be dark during startup.
This change causes the incorrect initial value from BIOS to be ignored.

References: https://bugzilla.kernel.org/show_bug.cgi?id=60161Reported-and-tested-by: NJan Hinnerk Stosch <janhinnerk.stosch@gmail.com>
Signed-off-by: NLan Tianyu <tianyu.lan@intel.com>
Cc: 3.7+ <stable@vger.kernel.org>
Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>

Recent change to use bio_copy_data() in raid1 when repairing
an array is faulty.

The underlying may have changed the bio in various ways using
bio_advance and these need to be undone not just for the 'sbio' which
is being copied to, but also the 'pbio' (primary) which is being
copied from.

So perform the reset on all bios that were read from and do it early.

This also ensure that the sbio->bi_io_vec[j].bv_len passed to
memcmp is correct.

This fixes a crash during a 'check' of a RAID1 array.  The crash was
introduced in 3.10 so this is suitable for 3.10-stable.

Cc: stable@vger.kernel.org (3.10)
Reported-by: NJoe Lawrence <joe.lawrence@stratus.com>
Signed-off-by: NNeilBrown <neilb@suse.de>

commit 7ceb17e8
    md: Allow devices to be re-added to a read-only array.

allowed a bit more than just that.  It also allows devices to be added
to a read-write array and to end up skipping recovery.

This patch removes the offending piece of code pending a rewrite for a
subsequent release.

More specifically:
 If the array has a bitmap, then the device will still need a bitmap
 based resync ('saved_raid_disk' is set under different conditions
 is a bitmap is present).
 If the array doesn't have a bitmap, then this is correct as long as
 nothing has been written to the array since the metadata was checked
 by ->validate_super.  However there is no locking to ensure that there
 was no write.

Bug was introduced in 3.10 and causes data corruption so
patch is suitable for 3.10-stable.

Cc: stable@vger.kernel.org (3.10)
Reported-by: NJoe Lawrence <joe.lawrence@stratus.com>
Signed-off-by: NNeilBrown <neilb@suse.de>

1/ When an different between blocks is found, data is copied from
   one bio to the other.  However bv_len is used as the length to
   copy and this could be zero.  So use r10_bio->sectors to calculate
   length instead.
   Using bv_len was probably always a bit dubious, but the introduction
   of bio_advance made it much more likely to be a problem.

2/ When preparing some blocks for sync, we don't set BIO_UPTODATE
   except on bios that we schedule for a read.  This ensures that
   missing/failed devices don't confuse the loop at the top of
   sync_request write.
   Commit 8be185f2 "raid10: Use bio_reset()"
   removed a loop which set BIO_UPTDATE on all appropriate bios.
   So we need to re-add that flag.

These bugs were introduced in 3.10, so this patch is suitable for
3.10-stable, and can remove a potential for data corruption.

Cc: stable@vger.kernel.org (3.10)
Reported-by: NBrassow Jonathan <jbrassow@redhat.com>
Signed-off-by: NNeilBrown <neilb@suse.de>

Starting from win8, MS backlight control driver will set bit 2 of the
parameter of control method _DOS, to inform firmware it should not
perform any automatic brightness changes. This mostly affects hotkey
notification deliver - if we do not set this bit, on hotkey press,
firmware may choose to adjust brightness level instead of sending out
notification and doing nothing.

So this patch sets bit 2 when calling _DOS so that GUIs can show the
notification window on hotkey press.  This behavior change is only
necessary for win8 systems.

The MS document on win8 backlight control is here:
http://msdn.microsoft.com/en-US/library/windows/hardware/jj159305

References: https://bugzilla.kernel.org/show_bug.cgi?id=52951
References: https://bugzilla.kernel.org/show_bug.cgi?id=56711Reported-by: NMicael Dias <kam1kaz3@gmail.com>
Reported-by: NDan Garton <dan.garton@gmail.com>
Reported-by: NBob Ziuchkovski <bob.ziuchkovski@gmail.com>
Signed-off-by: NAaron Lu <aaron.lu@intel.com>
Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>

According to Matthew Garrett, "Windows 8 leaves backlight control up
to individual graphics drivers rather than making ACPI calls itself.
There's plenty of evidence to suggest that the Intel driver for
Windows [8] doesn't use the ACPI interface, including the fact that
it's broken on a bunch of machines when the OS claims to support
Windows 8.  The simplest thing to do appears to be to disable the
ACPI backlight interface on these systems".

There's a problem with that approach, however, because simply
avoiding to register the ACPI backlight interface if the firmware
calls _OSI for Windows 8 may not work in the following situations:
 (1) The ACPI backlight interface actually works on the given system
     and the i915 driver is not loaded (e.g. another graphics driver
     is used).
 (2) The ACPI backlight interface doesn't work on the given system,
     but there is a vendor platform driver that will register its
     own, equally broken, backlight interface if not prevented from
     doing so by the ACPI subsystem.
Therefore we need to allow the ACPI backlight interface to be
registered until the i915 driver is loaded which then will unregister
it if the firmware has called _OSI for Windows 8 (or will register
the ACPI video driver without backlight support if not already
present).

For this reason, introduce an alternative function for registering
ACPI video, acpi_video_register_with_quirks(), that will check
whether or not the ACPI video driver has already been registered
and whether or not the backlight Windows 8 quirk has to be applied.
If the quirk has to be applied, it will block the ACPI backlight
support and either unregister the backlight interface if the ACPI
video driver has already been registered, or register the ACPI
video driver without the backlight interface otherwise.  Make
the i915 driver use acpi_video_register_with_quirks() instead of
acpi_video_register() in i915_driver_load().

This change is based on earlier patches from Matthew Garrett,
Chun-Yi Lee and Seth Forshee and includes a fix from Aaron Lu's.

References: https://bugzilla.kernel.org/show_bug.cgi?id=51231Tested-by: NAaron Lu <aaron.lu@intel.com>
Tested-by: NIgor Gnatenko <i.gnatenko.brain@gmail.com>
Tested-by: NYves-Alexis Perez <corsac@debian.org>
Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: NAaron Lu <aaron.lu@intel.com>
Acked-by: NMatthew Garrett <matthew.garrett@nebula.com>

Set temporary variable as 0 to avoid garbage string output from
/proc/iomem after register resources and reset to PNP dev name
later.
Signed-off-by: NLiu ShuoX <shuox.liu@intel.com>
Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>

We have to call acpi_video_init_brightness() even if we're not going
to initialise the backlight - Thinkpads seem to use this as the
trigger for enabling ACPI notifications rather than handling it in
firmware.

[rjw: Drop the brightness object created by
 acpi_video_init_brightness() if we are not going to use it.]
Signed-off-by: NMatthew Garrett <matthew.garrett@nebula.com>
Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>

Expose acpi_gbl_osi_data so that code outside of ACPICA can check
the value of the last successfull _OSI call.  The definitions for
OSI versions are moved to actypes.h so that other components can
access them too.

Based on a patch from Matthew Garrett which in turn was based on
an earlier patch from Seth Forshee.

[rjw: Changelog]
Signed-off-by: NAaron Lu <aaron.lu@intel.com>
Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>

This allows you to look at the current DPM state via
debugfs.

Due to the way the hardware works on these asics, there's
no way to look up exactly what power state we are in, so
we make the best guess we can based on the current sclk.

v2: Anthoine's version
v3: fix ref div
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

See bugs:
https://bugs.freedesktop.org/show_bug.cgi?id=66932
https://bugs.freedesktop.org/show_bug.cgi?id=66972
https://bugs.freedesktop.org/show_bug.cgi?id=66945Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Due to commit 3683243b ("xen-netfront: use __pskb_pull_tail to ensure
linear area is big enough on RX") xennet_fill_frags() may end up
filling MAX_SKB_FRAGS + 1 fragments in a receive skb, and only reduce
the fragment count subsequently via __pskb_pull_tail(). That's a
result of xennet_get_responses() allowing a maximum of one more slot to
be consumed (and intermediately transformed into a fragment) if the
head slot has a size less than or equal to RX_COPY_THRESHOLD.

Hence we need to adjust xennet_fill_frags() to pull earlier if we
reached the maximum fragment count - due to the described behavior of
xennet_get_responses() this guarantees that at least the first fragment
will get completely consumed, and hence the fragment count reduced.

In order to not needlessly call __pskb_pull_tail() twice, make the
original call conditional upon the pull target not having been reached
yet, and defer the newly added one as much as possible (an alternative
would have been to always call the function right before the call to
xennet_fill_frags(), but that would imply more frequent cases of
needing to call it twice).
Signed-off-by: NJan Beulich <jbeulich@suse.com>
Acked-by: NWei Liu <wei.liu2@citrix.com>
Cc: Ian Campbell <ian.campbell@citrix.com>
Cc: stable@vger.kernel.org (3.6 onwards)
Acked-by: NIan Campbell <ian.campbell@citrix.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The socket management is now done in workqueue (outside of RTNL)
and protected by vn->sock_lock. There were two possible bugs, first
the vxlan device was removed from the VNI hash table per socket without
holding lock. And there was a race when device is created and the workqueue
could run after deletion.
Signed-off-by: NStephen Hemminger <stephen@networkplumber.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

It seems gcc 4.8.1 generates bogus code for the old logic causing
part of the function to get skipped.

Fixes:
https://bugs.freedesktop.org/show_bug.cgi?id=66932
https://bugs.freedesktop.org/show_bug.cgi?id=66972
https://bugs.freedesktop.org/show_bug.cgi?id=66945Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Parsing the table in incorrectly led to problems with
certain asics with mclk switching.
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Can cause hangs when enabled in certain motherboards.
Set radeon.aspm=0 to disable aspm.
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

The GEM CMA PRIME import/export helpers have been removed in favor of
generic GEM PRIME helpers with GEM CMA low-level operations. Fix the
driver accordingly.
Reported-by: NMark Brown <broonie@linaro.org>
Signed-off-by: NLaurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Tested-by: NMark Brown <broonie@linaro.org>

The GEM CMA PRIME import/export helpers have been removed in favor of
generic GEM PRIME helpers with GEM CMA low-level operations. Fix the
driver accordingly.
Reported-by: NMark Brown <broonie@linaro.org>
Signed-off-by: NLaurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Tested-by: NMark Brown <broonie@linaro.org>

SG mode is not currently supported by netvsc, so remove this flag for now.
Otherwise, it will be unconditionally enabled by commit ec5f0615
    "Kill link between CSUM and SG features"
Previously, the SG feature is disabled because CSUM is not set here.
Signed-off-by: NHaiyang Zhang <haiyangz@microsoft.com>
Reviewed-by: NK. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Fix new kernel-doc warning in drivers/base/platform.c:

Warning(drivers/base/platform.c:528): No description found for parameter 'owner'
Signed-off-by: NRandy Dunlap <rdunlap@infradead.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

This driver is not being updated as the specifications are not able to
be gotten from CSR or anyone else.  Without those, getting this driver
into proper mergable shape is going to be impossible.  So remove the
driver from the tree.

If the specifications ever become available, this patch can be reverted
and the driver fixed up properly.
Reported-by: NLidza Louina <lidza.louina@gmail.com>
Cc: Veli-Pekka Peltola <veli-pekka.peltola@bluegiga.com>
Cc: Mikko Virkkilä <mikko.virkkila@bluegiga.com>
Cc: Lauri Hintsala <Lauri.Hintsala@bluegiga.com>
Cc: Riku Mettälä <riku.mettala@bluegiga.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 2f7021a8 "cpufreq: protect 'policy->cpus' from offlining
during __gov_queue_work()" caused a regression in CPU hotplug,
because it lead to a deadlock between cpufreq governor worker thread
and the CPU hotplug writer task.

Lockdep splat corresponding to this deadlock is shown below:

[   60.277396] ======================================================
[   60.277400] [ INFO: possible circular locking dependency detected ]
[   60.277407] 3.10.0-rc7-dbg-01385-g241fd04-dirty #1744 Not tainted
[   60.277411] -------------------------------------------------------
[   60.277417] bash/2225 is trying to acquire lock:
[   60.277422]  ((&(&j_cdbs->work)->work)){+.+...}, at: [<ffffffff810621b5>] flush_work+0x5/0x280
[   60.277444] but task is already holding lock:
[   60.277449]  (cpu_hotplug.lock){+.+.+.}, at: [<ffffffff81042d8b>] cpu_hotplug_begin+0x2b/0x60
[   60.277465] which lock already depends on the new lock.

[   60.277472] the existing dependency chain (in reverse order) is:
[   60.277477] -> #2 (cpu_hotplug.lock){+.+.+.}:
[   60.277490]        [<ffffffff810ac6d4>] lock_acquire+0xa4/0x200
[   60.277503]        [<ffffffff815b6157>] mutex_lock_nested+0x67/0x410
[   60.277514]        [<ffffffff81042cbc>] get_online_cpus+0x3c/0x60
[   60.277522]        [<ffffffff814b842a>] gov_queue_work+0x2a/0xb0
[   60.277532]        [<ffffffff814b7891>] cs_dbs_timer+0xc1/0xe0
[   60.277543]        [<ffffffff8106302d>] process_one_work+0x1cd/0x6a0
[   60.277552]        [<ffffffff81063d31>] worker_thread+0x121/0x3a0
[   60.277560]        [<ffffffff8106ae2b>] kthread+0xdb/0xe0
[   60.277569]        [<ffffffff815bb96c>] ret_from_fork+0x7c/0xb0
[   60.277580] -> #1 (&j_cdbs->timer_mutex){+.+...}:
[   60.277592]        [<ffffffff810ac6d4>] lock_acquire+0xa4/0x200
[   60.277600]        [<ffffffff815b6157>] mutex_lock_nested+0x67/0x410
[   60.277608]        [<ffffffff814b785d>] cs_dbs_timer+0x8d/0xe0
[   60.277616]        [<ffffffff8106302d>] process_one_work+0x1cd/0x6a0
[   60.277624]        [<ffffffff81063d31>] worker_thread+0x121/0x3a0
[   60.277633]        [<ffffffff8106ae2b>] kthread+0xdb/0xe0
[   60.277640]        [<ffffffff815bb96c>] ret_from_fork+0x7c/0xb0
[   60.277649] -> #0 ((&(&j_cdbs->work)->work)){+.+...}:
[   60.277661]        [<ffffffff810ab826>] __lock_acquire+0x1766/0x1d30
[   60.277669]        [<ffffffff810ac6d4>] lock_acquire+0xa4/0x200
[   60.277677]        [<ffffffff810621ed>] flush_work+0x3d/0x280
[   60.277685]        [<ffffffff81062d8a>] __cancel_work_timer+0x8a/0x120
[   60.277693]        [<ffffffff81062e53>] cancel_delayed_work_sync+0x13/0x20
[   60.277701]        [<ffffffff814b89d9>] cpufreq_governor_dbs+0x529/0x6f0
[   60.277709]        [<ffffffff814b76a7>] cs_cpufreq_governor_dbs+0x17/0x20
[   60.277719]        [<ffffffff814b5df8>] __cpufreq_governor+0x48/0x100
[   60.277728]        [<ffffffff814b6b80>] __cpufreq_remove_dev.isra.14+0x80/0x3c0
[   60.277737]        [<ffffffff815adc0d>] cpufreq_cpu_callback+0x38/0x4c
[   60.277747]        [<ffffffff81071a4d>] notifier_call_chain+0x5d/0x110
[   60.277759]        [<ffffffff81071b0e>] __raw_notifier_call_chain+0xe/0x10
[   60.277768]        [<ffffffff815a0a68>] _cpu_down+0x88/0x330
[   60.277779]        [<ffffffff815a0d46>] cpu_down+0x36/0x50
[   60.277788]        [<ffffffff815a2748>] store_online+0x98/0xd0
[   60.277796]        [<ffffffff81452a28>] dev_attr_store+0x18/0x30
[   60.277806]        [<ffffffff811d9edb>] sysfs_write_file+0xdb/0x150
[   60.277818]        [<ffffffff8116806d>] vfs_write+0xbd/0x1f0
[   60.277826]        [<ffffffff811686fc>] SyS_write+0x4c/0xa0
[   60.277834]        [<ffffffff815bbbbe>] tracesys+0xd0/0xd5
[   60.277842] other info that might help us debug this:

[   60.277848] Chain exists of:
  (&(&j_cdbs->work)->work) --> &j_cdbs->timer_mutex --> cpu_hotplug.lock

[   60.277864]  Possible unsafe locking scenario:

[   60.277869]        CPU0                    CPU1
[   60.277873]        ----                    ----
[   60.277877]   lock(cpu_hotplug.lock);
[   60.277885]                                lock(&j_cdbs->timer_mutex);
[   60.277892]                                lock(cpu_hotplug.lock);
[   60.277900]   lock((&(&j_cdbs->work)->work));
[   60.277907]  *** DEADLOCK ***

[   60.277915] 6 locks held by bash/2225:
[   60.277919]  #0:  (sb_writers#6){.+.+.+}, at: [<ffffffff81168173>] vfs_write+0x1c3/0x1f0
[   60.277937]  #1:  (&buffer->mutex){+.+.+.}, at: [<ffffffff811d9e3c>] sysfs_write_file+0x3c/0x150
[   60.277954]  #2:  (s_active#61){.+.+.+}, at: [<ffffffff811d9ec3>] sysfs_write_file+0xc3/0x150
[   60.277972]  #3:  (x86_cpu_hotplug_driver_mutex){+.+...}, at: [<ffffffff81024cf7>] cpu_hotplug_driver_lock+0x17/0x20
[   60.277990]  #4:  (cpu_add_remove_lock){+.+.+.}, at: [<ffffffff815a0d32>] cpu_down+0x22/0x50
[   60.278007]  #5:  (cpu_hotplug.lock){+.+.+.}, at: [<ffffffff81042d8b>] cpu_hotplug_begin+0x2b/0x60
[   60.278023] stack backtrace:
[   60.278031] CPU: 3 PID: 2225 Comm: bash Not tainted 3.10.0-rc7-dbg-01385-g241fd04-dirty #1744
[   60.278037] Hardware name: Acer             Aspire 5741G    /Aspire 5741G    , BIOS V1.20 02/08/2011
[   60.278042]  ffffffff8204e110 ffff88014df6b9f8 ffffffff815b3d90 ffff88014df6ba38
[   60.278055]  ffffffff815b0a8d ffff880150ed3f60 ffff880150ed4770 3871c4002c8980b2
[   60.278068]  ffff880150ed4748 ffff880150ed4770 ffff880150ed3f60 ffff88014df6bb00
[   60.278081] Call Trace:
[   60.278091]  [<ffffffff815b3d90>] dump_stack+0x19/0x1b
[   60.278101]  [<ffffffff815b0a8d>] print_circular_bug+0x2b6/0x2c5
[   60.278111]  [<ffffffff810ab826>] __lock_acquire+0x1766/0x1d30
[   60.278123]  [<ffffffff81067e08>] ? __kernel_text_address+0x58/0x80
[   60.278134]  [<ffffffff810ac6d4>] lock_acquire+0xa4/0x200
[   60.278142]  [<ffffffff810621b5>] ? flush_work+0x5/0x280
[   60.278151]  [<ffffffff810621ed>] flush_work+0x3d/0x280
[   60.278159]  [<ffffffff810621b5>] ? flush_work+0x5/0x280
[   60.278169]  [<ffffffff810a9b14>] ? mark_held_locks+0x94/0x140
[   60.278178]  [<ffffffff81062d77>] ? __cancel_work_timer+0x77/0x120
[   60.278188]  [<ffffffff810a9cbd>] ? trace_hardirqs_on_caller+0xfd/0x1c0
[   60.278196]  [<ffffffff81062d8a>] __cancel_work_timer+0x8a/0x120
[   60.278206]  [<ffffffff81062e53>] cancel_delayed_work_sync+0x13/0x20
[   60.278214]  [<ffffffff814b89d9>] cpufreq_governor_dbs+0x529/0x6f0
[   60.278225]  [<ffffffff814b76a7>] cs_cpufreq_governor_dbs+0x17/0x20
[   60.278234]  [<ffffffff814b5df8>] __cpufreq_governor+0x48/0x100
[   60.278244]  [<ffffffff814b6b80>] __cpufreq_remove_dev.isra.14+0x80/0x3c0
[   60.278255]  [<ffffffff815adc0d>] cpufreq_cpu_callback+0x38/0x4c
[   60.278265]  [<ffffffff81071a4d>] notifier_call_chain+0x5d/0x110
[   60.278275]  [<ffffffff81071b0e>] __raw_notifier_call_chain+0xe/0x10
[   60.278284]  [<ffffffff815a0a68>] _cpu_down+0x88/0x330
[   60.278292]  [<ffffffff81024cf7>] ? cpu_hotplug_driver_lock+0x17/0x20
[   60.278302]  [<ffffffff815a0d46>] cpu_down+0x36/0x50
[   60.278311]  [<ffffffff815a2748>] store_online+0x98/0xd0
[   60.278320]  [<ffffffff81452a28>] dev_attr_store+0x18/0x30
[   60.278329]  [<ffffffff811d9edb>] sysfs_write_file+0xdb/0x150
[   60.278337]  [<ffffffff8116806d>] vfs_write+0xbd/0x1f0
[   60.278347]  [<ffffffff81185950>] ? fget_light+0x320/0x4b0
[   60.278355]  [<ffffffff811686fc>] SyS_write+0x4c/0xa0
[   60.278364]  [<ffffffff815bbbbe>] tracesys+0xd0/0xd5
[   60.280582] smpboot: CPU 1 is now offline

The intention of that commit was to avoid warnings during CPU
hotplug, which indicated that offline CPUs were getting IPIs from the
cpufreq governor's work items.  But the real root-cause of that
problem was commit a66b2e50 (cpufreq: Preserve sysfs files across
suspend/resume) because it totally skipped all the cpufreq callbacks
during CPU hotplug in the suspend/resume path, and hence it never
actually shut down the cpufreq governor's worker threads during CPU
offline in the suspend/resume path.

Reflecting back, the reason why we never suspected that commit as the
root-cause earlier, was that the original issue was reported with
just the halt command and nobody had brought in suspend/resume to the
equation.

The reason for _that_ in turn, as it turns out, is that earlier
halt/shutdown was being done by disabling non-boot CPUs while tasks
were frozen, just like suspend/resume....  but commit cf7df378
(reboot: migrate shutdown/reboot to boot cpu) which came somewhere
along that very same time changed that logic: shutdown/halt no longer
takes CPUs offline.  Thus, the test-cases for reproducing the bug
were vastly different and thus we went totally off the trail.

Overall, it was one hell of a confusion with so many commits
affecting each other and also affecting the symptoms of the problems
in subtle ways.  Finally, now since the original problematic commit
(a66b2e50) has been completely reverted, revert this intermediate fix
too (2f7021a8), to fix the CPU hotplug deadlock.  Phew!
Reported-by: NSergey Senozhatsky <sergey.senozhatsky@gmail.com>
Reported-by: NBartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Signed-off-by: NSrivatsa S. Bhat <srivatsa.bhat@linux.vnet.ibm.com>
Tested-by: NPeter Wu <lekensteyn@gmail.com>
Cc: 3.10+ <stable@vger.kernel.org>
Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>

Hardware workaround requesting hardware to skip vlan insertion is necessary
only when umc or qnq is enabled. Enabling this workaround in other scenarios
could cause controller to stall.
Signed-off-by: NSarveshwar Bandi <sarveshwar.bandi@emulex.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The hard-coded 8021.q proto will break 802.1ad traffic. So switch to use
vlan->proto.

Cc: Basil Gor <basil.gor@gmail.com>
Signed-off-by: NJason Wang <jasowang@redhat.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Commit 441ac0fc
(macvtap: Convert to using rtnl lock) forget to return what
macvtap_ioctl_set_queue() returns to its caller. This may break multiqueue API
by always falling through to TUNGETFEATURES.

Cc: Vlad Yasevich <vyasevic@redhat.com>
Signed-off-by: NJason Wang <jasowang@redhat.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Cc: Eli Cohen <eli@mellanox.com>
Signed-off-by: NTim Gardner <tim.gardner@canonical.com>
Acked-by: NRandy Dunlap <rdunlap@infradead.org>
Reported-by: NRandy Dunlap <rdunlap@infradead.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

bgmac is using functions from phylib, add the dependency.
Signed-off-by: NHauke Mehrtens <hauke@hauke-m.de>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Ben Hutchings pointed out that my recent update to atl1e
in commit 352900b5
("atl1e: fix dma mapping warnings") was missing a bit of code.

Specifically it reset the hardware tx ring to its origional state when
we hit a dma error, but didn't unmap any exiting mappings from the
operation.  This patch fixes that up.  It also remembers to free the
skb in the event that an error occurs, so we don't leak.  Untested, as
I don't have hardware.  I think its pretty straightforward, but please
review closely.
Signed-off-by: NNeil Horman <nhorman@tuxdriver.com>
CC: Ben Hutchings <bhutchings@solarflare.com>
CC: Jay Cliburn <jcliburn@gmail.com>
CC: Chris Snook <chris.snook@gmail.com>
CC: "David S. Miller" <davem@davemloft.net>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

We should be using groups, not attribute lists, for classes to allow
subdirectories, and soon, binary files.  Groups are just more flexible
overall, so add them.

The dev_attrs list will go away after all in-kernel users are converted
to use dev_groups.
Reviewed-by: NGuenter Roeck <linux@roeck-us.net>
Tested-by: NGuenter Roeck <linux@roeck-us.net>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

device_create_groups lets callers create devices as well as associated
sysfs attributes with a single call. This avoids race conditions seen
if sysfs attributes on new devices are created later.

[fixed up comment block placement and add checks for printk buffer
formats - gregkh]
Signed-off-by: NGuenter Roeck <linux@roeck-us.net>
Cc: Jean Delvare <khali@linux-fr.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>