- 20 9月, 2006 39 次提交
-
-
由 Gerald Schaefer 提交于
Changed and simplified some page table related #defines and code. Signed-off-by: NGerald Schaefer <geraldsc@de.ibm.com> Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
由 Melissa Howland 提交于
This patch delivers a new Linux API in the form of a misc char device that is useable from user space and allows write access to the z/VM APPLDATA Monitor Records collected by the *MONITOR System Service of z/VM. Signed-off-by: NMelissa Howland <melissah@us.ibm.com> Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
由 Christian Borntraeger 提交于
The xpram driver shows and uses 4096 bytes less than available. Signed-off-by: NChristian Borntraeger <cborntra@de.ibm.com> Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
由 Heiko Carstens 提交于
Follow other architectures and remove kexec experimental flag. Signed-off-by: NHeiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
由 Gerald Schaefer 提交于
Introduce asm header that contains the appldata data structures and the diag inline assembly. Signed-off-by: NGerald Schaefer <geraldsc@de.ibm.com> Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
由 Christian Borntraeger 提交于
Fix comment typo in vmcp, it is z/VM and not v/VM. Signed-off-by: NChristian Borntraeger <cborntra@de.ibm.com> Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
由 Heiko Carstens 提交于
Substract the size of the initial stack frame from the correct register. Otherwise we will end up in a program check loop. Fix the offset into the save area as well. Signed-off-by: NHeiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
由 Frank Pavlic 提交于
The last SLSB has to be set to STATE_PROCESSING if we really want to use the PROCESSING feature. Signed-off-by: NFrank Pavlic <fpavlic@de.ibm.com> Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
由 Heiko Carstens 提交于
Previous patch that was intended to reduce stack usage within common i/o layer didn't consider implicit memset(..., 0, ...) used with the initializations used before. Add these missing memsets wherever it's not obvious that the concerned memory region is zeroed. This should give the same semantics as before. Signed-off-by: NHeiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
由 Heiko Carstens 提交于
Convert GET_IPL_DEVICE assembler macro to C function. Signed-off-by: NHeiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
由 Heiko Carstens 提交于
Signed-off-by: NHeiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
由 Martin Schwidefsky 提交于
With System z9 additional fields have been added to the output of the store system information instruction. This patch adds the new model information field and the alternate cpu capability fields to the output of /proc/sysinfo. While we at it clean up the code as well. Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
由 Horst Hummel 提交于
Enhanced default DBF level to get most important messages in debug feature files. Signed-off-by: NHorst Hummel <horst.hummel@de.ibm.com> Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
由 Martin Schwidefsky 提交于
The dasd_device_from_cdev function is called from interrupt context to get the struct dasd_device associated with a ccw device. The driver_data of the ccw device points to the dasd_devmap structure which contains the pointer to the dasd_device structure. The lock that protects the dasd_devmap structure is acquire with out irqsave. To prevent the deadlock in dasd_device_from_cdev if it is called from interrupt context the dependency to the dasd_devmap structure needs to be removed. Let the driver_data of the ccw device point to the dasd_device structure directly and use the ccw device lock to protect the access. Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
由 Frank Pavlic 提交于
qdio_get_micros is supposed to return microseconds. The get_clock() return value needs to be shifted by 12 to get to microseconds. Signed-off-by: NFrank Pavlic <fpavlic@de.ibm.com> Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
由 Heiko Carstens 提交于
Fix compile warning with some configurations: arch/s390/mm/cmm.c:58: warning: 'cmm_strtoul' defined but not used Originally cmm_strtoul was introduced because simple_strtoul couldn't handle strings with hexadecimal numbers that contained a capital 'X'. Since this is no longer true cmm_strtoul can be removed. Signed-off-by: NHeiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
由 Martin Schwidefsky 提交于
Add Heiko Carstens as co-maintainer for the s390 architecture. Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
由 Martin Schwidefsky 提交于
Avoid using #undef in unistd.h. Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
由 Heiko Carstens 提交于
If do_signal() gets called several times before returning to user space and no signal is pending (e.g. cancelled by a debugger) syscall restart handling could be done several times. This would change the user space PSW to an address prior to the syscall instruction. Fix this by making sure that syscall restart handling is only done once. Signed-off-by: NHeiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
由 Heiko Carstens 提交于
Use do { } while (0) constructs instead of empty defines to avoid subtle compile bugs. Signed-off-by: NHeiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
由 Michael Holzheu 提交于
It is now possible to specify a ccw/fcp dump device which is used to automatically create a system dump in case of a kernel panic. The dump device can be configured under /sys/firmware/dump. In addition it is now possible to specify a ccw/fcp device which is used for the next reboot of Linux. The reipl device can be configured under /sys/firmware/reipl. Signed-off-by: NMichael Holzheu <holzheu@de.ibm.com> Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
由 Michael Holzheu 提交于
Add casts to avoid compiler warnings. Signed-off-by: NMichael Holzheu <holzheu@de.ibm.com> Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
由 Michael Holzheu 提交于
Correct some comments in the hypervisor filesystem. Signed-off-by: NMichael Holzheu <holzheu@de.ibm.com> Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
由 Heiko Carstens 提交于
Move initrd if the bitmap of the bootmem allocator would overwrite it. In addition this patch sets the default size and address of the initrd to 0. Therefore all boot loaders must set the initrd size and address correctly. This is especially relevant for ftp boot via HMC/SE, where this change requires a special patch file entry in the .ins file which sets these two values contained at address 0x10408 and 0x10410. Signed-off-by: NHeiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
由 Michael Grundy 提交于
Signed-off-by: NMichael Grundy <grundym@us.ibm.com> Signed-off-by: NDavid Wilder <dwilder@us.ibm.com> Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
由 Ralph Wuerthner 提交于
Allow the user space to send extended cprb messages directly to the PCIXCC / CEX2C cards. This allows the CCA library to construct special crypto requests that use "secure" keys that are stored on the card. Signed-off-by: NRalph Wuerthner <rwuerthn@de.ibm.com> Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
由 Martin Schwidefsky 提交于
The Makefile and Kconfig changes should be obvious. The monolithic build option is there to create an old-style z90crypt module for backward compatability to older distributions. Signed-off-by: NRalph Wuerthner <rwuerthn@de.ibm.com> Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
由 Martin Schwidefsky 提交于
Signed-off-by: NRalph Wuerthner <rwuerthn@de.ibm.com> Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
由 Martin Schwidefsky 提交于
Signed-off-by: NRalph Wuerthner <rwuerthn@de.ibm.com> Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
由 Martin Schwidefsky 提交于
The user space interface of the zcrypt device driver implements the old user space interface as defined by the old z90crypt driver. Everything is there, the /dev/z90crypt misc character device, all the lovely ioctls and the /proc file. Even writing to the z90crypt proc file to configure the crypto device still works. It stands to reason to remove the proc write function someday since a much cleaner configuration via the sysfs is now available. The ap bus device drivers register crypto cards to the zcrypt user space interface. The request router of the user space interface picks one of the registered cards based on the predicted latency for the request and calls the driver via a callback found in the zcrypt_ops of the device. The request router only knows which operations the card can do and the minimum / maximum number of bits a request can have. Signed-off-by: NCornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: NRalph Wuerthner <rwuerthn@de.ibm.com> Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
由 Martin Schwidefsky 提交于
Add a bus for the adjunct processor interface. Up to 64 devices can be connect to the ap bus interface, each device with 16 domains. That makes 1024 message queues. The interface is asynchronous, the answer to a message sent to a queue needs to be received at some later point in time. Unfortunately the interface does not provide interrupts when a message reply is pending. So the ap bus needs to implement some fancy polling, each active queue is polled once per 1/HZ second or continuously if an idle cpus exsists and the poll thread is activ (see poll_thread parameter). The ap bus uses the sysfs path /sys/bus/ap and has two bus attributes, ap_domain and config_time. The ap_domain selects one of the 16 domains to be used for this system. This limits the maximum number of ap devices to 64. The config_time attribute contains the number of seconds between two ap bus scans to find new devices. The ap bus uses the modalias entries of the form "ap:tN" to autoload the ap driver for hardware type N. Currently known types are: 3 - PCICC, 4 - PCICA, 5 - PCIXCC, 6 - CEX2A and 7 - CEX2C. Signed-off-by: NCornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: NRalph Wuerthner <rwuerthn@de.ibm.com> Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
由 Martin Schwidefsky 提交于
The z90crypt driver has served its term. It is replaced by the shiny new zcrypt device driver. Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
由 Martin Schwidefsky 提交于
Add EX_TABLE helper macro to simplify creation of inline assembly exception table entries. Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
由 Linus Torvalds 提交于
Ahoy, all land-lubbers, test me out right smartly! Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Linus Torvalds 提交于
* master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6: [IPV4] fib_trie: missing ntohl() when calling fib_semantic_match() [NETFILTER]: xt_quota: add missing module aliases [ATM]: [he] don't hold the device lock when upcalling
-
由 Al Viro 提交于
fib_trie.c::check_leaf() passes host-endian where fib_semantic_match() expects (and stores into) net-endian. Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Patrick McHardy 提交于
Add missing aliases for ipt_quota and ip6t_quota to make autoload work. Signed-off-by: NPatrick McHardy <kaber@trash.net> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Chas Williams 提交于
This can create a deadlock/lock ordering problem with other layers that want to use the transmit (or other) path of the card at that time. Signed-off-by: NChas Williams <chas@cmf.nrl.navy.mil> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
git://git.linux-nfs.org/pub/linux/nfs-2.6由 Linus Torvalds 提交于
* 'fixes' of git://git.linux-nfs.org/pub/linux/nfs-2.6: NFS: Fix nfs_page use after free issues in fs/nfs/write.c NFSv4: Fix incorrect semaphore release in _nfs4_do_open() NFS: Fix Oopsable condition in nfs_readpage_sync()
-
- 19 9月, 2006 1 次提交
-
-
由 Trond Myklebust 提交于
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-