Similar to gen6, we will use for_each_pde/for_each_pdpe
and pte/pde/pdpe_index to iterate over these new structures.

v2: Match trace_i915_va_teardown params
v3: Multiple rebases.
v4: Updated to use unmap_and_free_pt.
v5: teardown_va_range logic no longer needed.
v6: Rebase after s/page_tables/page_table/.
v7: Renamed commit to match what it does now (it was "Use dynamic
allocation idioms on free").
v8: Prevent (harmless) out of range access in gen8_for_each_pde and
gen8_for_each_pdpe_e.
Signed-off-by: NBen Widawsky <ben@bwidawsk.net>
Signed-off-by: Michel Thierry <michel.thierry@intel.com> (v2+)
Reviewed-by: NMika Kuoppala <mika.kuoppala@intel.com>
[danvet: s/BUG/WARN/]
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Similar to gen6, while setting up a page table, make all entries of the
pt point to the scratch page before mapping; this is to be safe in case
of out of bound access or proactive prefetch.

Systems without LLC require an explicit flush.

v2: Expanded commit text and fixed indentation (Mika)
Signed-off-by: NMichel Thierry <michel.thierry@intel.com>
Reviewed-by: NMika Kuoppala <mika.kuoppala@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

We are already unmapping them in gen8_ppgtt_free. This function became
redundant since commit 06fda602
("drm/i915: Create page table allocators").

Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Signed-off-by: NMichel Thierry <michel.thierry@intel.com>
Reviewed-by: NMika Kuoppala <mika.kuoppala@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Lets try to keep this consistent:

Page Directory Pointer (PDP).
Page Directory (PD), also known as page directory pointer entries.
Page Table (PT), also known as page directory entries.

s/struct i915_page_table_entry/struct i915_page_table/
s/struct i915_page_directory_entry/struct i915_page_directory/
s/struct i915_page_directory_pointer_entry/struct
i915_page_directory_pointer/
Suggested-by: NMika Kuoppala <mika.kuoppala@linux.intel.com>
Signed-off-by: NMichel Thierry <michel.thierry@intel.com>
Reviewed-by: NMika Kuoppala <mika.kuoppala@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

This is mostly useful for execlists where the rings switch between
contexts (and so checking that the ring's start register matches the
context is important).
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

This is just so that I don't have to read about the batch pool on
systems that are not using it! Rather than using a newline between the
kernel clients and userspace clients, just distinguish the internal
allocations with a '[k]'
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Since we use obj->active as a hint in many places throughout the code,
knowing its state in debugfs is extremely useful.
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: NTvrtko Ursulin <tvrtko.ursulin@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Now with the trimmed memcpy before the command parser, we try to
allocate many different sizes of batches, predominantly one or two
pages. We can therefore speed up searching for a good sized batch by
keeping the objects of buckets of roughly the same size.

v2: Add a comment about bucket sizes
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

At runtime, this helps ensure that the batch pools are kept trim and
fast. Then at suspend, this releases memory that we do not need to
restore. It also ties into the oom-notifier to ensure that we recover as
much kernel memory as possible during OOM.
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: NTvrtko Ursulin <tvrtko.ursulin@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

I woke up one morning and found 50k objects sitting in the batch pool
and every search seemed to iterate the entire list... Painting the
screen in oils would provide a more fluid display.

One issue with the current design is that we only check for retirements
on the current ring when preparing to submit a new batch. This means
that we can have thousands of "active" batches on another ring that we
have to walk over. The simplest way to avoid that is to split the pools
per ring and then our LRU execution ordering will also ensure that the
inactive buffers remain at the front.

v2: execlists still requires duplicate code.
v3: execlists requires more duplicate code
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: NTvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Move the madvise logic out of the execbuffer main path into the
relatively rare allocation path, making the execbuffer manipulation less
fragile.
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: NTvrtko Ursulin <tvrtko.ursulin@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

In the next patch, I want to use the structure elsewhere and so require
it defined earlier. Rather than move the definition to an earlier location
where it feels very odd, place it in its own header file.
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: NTvrtko Ursulin <tvrtko.ursulin@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

This reverts commit ec5cc0f9
Author: Chris Wilson <chris@chris-wilson.co.uk>
Date:   Thu Jun 12 10:28:55 2014 +0100

    drm/i915: Restrict GPU boost to the RCS engine

The premise that media/blitter workloads are not affected by boosting is
patently false with a trip through igt. The question that remains is
what exactly is going wrong with the media workload that prompted this?
Hopefully that would be fixed by the missing agressive downclocking, in
addition to the extra restrictions imposed on how frequent a process is
allowed to boost.
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Cc: Deepak S <deepak.s@linux.intel.com>
Cc: Daniel Vetter <daniel.vetter@ffwll>
Acked-by: NDeepak S <deepak.s@linux.intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

With boosting for missed pageflips, we have a much stronger indication
of when we need to (temporarily) boost GPU frequency to ensure smooth
delivery of frames. So now only allow each client to perform one RPS boost
in each period of GPU activity due to stalling on results.
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Cc: Deepak S <deepak.s@linux.intel.com>
Reviewed-by: NDeepak S <deepak.s@linux.intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

If we hit a vblank and see that have a pageflip queue but not yet
processed, ensure that the GPU is running at maximum in order to clear
the backlog. Pageflips are only queued for the following vblank, if we
miss it, there will be a visible stutter. Boosting the GPU frequency
doesn't prevent us from missing the target vblank, but it should help
the subsequent frames hitting theirs.

v2: Reorder vblank vs flip-complete so that we only check for a missed
flip after processing the completion events, and avoid spurious boosts.

v3: Rename missed_vblank
v4: Rebase
v5: Cancel the outstanding work in runtime suspend
v6: Rebase
v7: Rebase required fixing
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Deepak S<deepak.s@linux.intel.com>
Reviewed-by: Deepak S<deepak.s@linux.intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

The issue is that by computing the last_adj value after applying the
clamping, we can end up with a bogus value for feeding into the next RPS
autotuning step.
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Deepak S <deepak.s@linux.intel.com>
Reviewed-by: NDeepak S <deepak.s@linux.intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Reuse the same reclocking strategy for Baytail as on its bigger brethren,
Sandybridge and Ivybridge. In particular, this makes the device quicker
to reclock (both up and down) though the tendency now is to downclock
more aggressively to compensate for the RPS boosts.

v2: Rebase
v3: Exclude Cherrytrail as Deepak was concerned that the increased
number of register writes would wake the common powerwell too often.
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Cc: Deepak S <deepak.s@linux.intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: NDeepak S <deepak.s@linux.intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Currently we emit semaphore synchronisation as if we were going to flip
using the target CS engine, but we then change our minds and do the flip
using the CPU. Consequently we write instructions to the ring but never
use them - even to the point of filling that ring up entirely and never
submitting a request.

The wrinkle in the ointment is that we have to tell a white lie to
pin-to-display for it to skip the synchronisation for mmioflips as we
will create a task specifically for that slow synchronisation. An oddity
of note is the discrepancy in requests that we tell to pin-display to
serialise to and that we then eventually wait upon. This is due to a
limitation in the i915_gem_object_sync() routine that will be lifted
later.
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

The biggest user of i915_gem_object_get_page() is the relocation
processing during execbuffer. Typically userspace passes in a set of
relocations in sorted order. Sadly, we alternate between relocations
increasing from the start of the buffers, and relocations decreasing
from the end. However the majority of consecutive lookups will still be
in the same page. We could cache the start of the last sg chain, however
for most callers, the entire sgl is inside a single chain and so we see
no improve from the extra layer of caching.

v2: Avoid the double increment inside unlikely()

References: https://bugs.freedesktop.org/show_bug.cgi?id=88308Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Cc: John Harrison <John.C.Harrison@Intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Signed-off-by: NDamien Lespiau <damien.lespiau@intel.com>
Reviewed-by: NRodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Both WaDisableSDEUnitClockGating and WaSetGAPSunitClckGateDisable are
needed on B0 as well.
Signed-off-by: NDamien Lespiau <damien.lespiau@intel.com>
Reviewed-by: NRodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

According to Spec this is a reserved bit for Gen9+ and should not be set.

Change-Id: I0215fb7057b94139b7a2f90ecc7a0201c0c93ad4
Signed-off-by: NArun Siluvery <arun.siluvery@linux.intel.com>
Reviewed-by: NMika Kuoppala <mika.kuoppala@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Signed-off-by: NMaarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

For the conversion to atomic. The pre_enable() hooks are called as part
of the crtc enable sequence, at which point the staged config was
already made effective. Furthermore, the function actually changes
hardware state, so it should anyway deal with current and not staged
config.
Signed-off-by: NAnder Conselvan de Oliveira <ander.conselvan.de.oliveira@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Reduce dependency on the staged config by using the atomic state
instead.
Signed-off-by: NAnder Conselvan de Oliveira <ander.conselvan.de.oliveira@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Reduce dependency on the staged config by using the atomic state
instead.
Signed-off-by: NAnder Conselvan de Oliveira <ander.conselvan.de.oliveira@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

It's not needed anymore, now that all the users were converted to using
an atomic state.
Signed-off-by: NAnder Conselvan de Oliveira <ander.conselvan.de.oliveira@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Move towards atomic by using the atomic state instead.
Signed-off-by: NAnder Conselvan de Oliveira <ander.conselvan.de.oliveira@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Now that we use a drm atomic state for the legacy modeset, it is
possible to get rid of the usage of intel_crtc->new_config in the
function intel_mode_max_pixclk().
Signed-off-by: NAnder Conselvan de Oliveira <ander.conselvan.de.oliveira@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

../drivers/gpu/drm/i915/intel_pm.c:3185:45: warning: Initializer entry defined twice
../drivers/gpu/drm/i915/intel_pm.c:3185:52:   also defined here
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Sometimes userspace wants a true overlay that is never clipped. In such
cases, we need to disable the destination colorkey. However, it is
currently unconditionally enabled in the overlay with no means of
disabling. So rectify that by always default to on, and extending the
UPDATE_ATTR ioctl to support explicit disabling of the colorkey.

This is contrast to the spite code which requires explicit enabling of
either the destination or source colorkey. Handling source colorkey is
still todo for the overlay. (Of course it may be worth migrating overlay
to sprite before then.)
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Occasionally it would be interesting to read some of the DPCD registers
for debug purposes, without having to resort to logging. Add an i915
specific i915_dpcd debugfs file for DP and eDP connectors to dump parts
of the DPCD. Currently the DPCD addresses to be dumped are statically
configured, and more can be added trivially.

The implementation also makes it relatively easy to add other i915 and
connector specific debugfs files in the future, as necessary.

This is currently i915 specific just because there's no generic way to
do AUX transactions given just a drm_connector. However it's all pretty
straightforward to port to other drivers.

v2: Add more DPCD registers to dump.
Signed-off-by: NJani Nikula <jani.nikula@intel.com>
Reviewed-by: NBob Paauwe <bob.j.paauwe@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Program the default initial value of the L3SqcReg1 on BDW for performance

v2: Default confirmed and using intel_ring_emit_wa as Mika pointed out.

v3: Spec shows now a different value. It tells us to set to 0x784000
    instead the 0x610000 that is there already.
    Also rebased after a long time so using WA_WRITE now.

Cc: Mika Kuoppala <mika.kuoppala@intel.com>
Signed-off-by: NRodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

We make use of HW tracking for Selective update region and enable frame sync on
sink. We use hardware's hardcoded data values for frame sync and GTC.

v2: Add 3200x2000 resolution restriction with PSR2, move psr2_support to i915_psr
struct, add aux_frame_sync to independently control aux frame sync, rename the
TP2 TIME macro for 2500us (Rodrigo, Siva)
v3: Moving the resolution restriction to intel_psr_enable so that we check it
only once(Durga)

Cc: Durgadoss R <durgadoss.r@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: NSonika Jindal <sonika.jindal@intel.com>
Reviewed-by: NDurgadoss R <durgadoss.r@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Count the number of requests in a ring for the user and show who
submitted them.
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: NMika Kuoppala <mika.kuoppala@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

The best_encoder field of connector_state wasn't properly set when a
connector was being disabled, leading to an incosistent atomic state.

For now, this doesn't cause anything to blow up, because everywhere
we're using connector_state->best_encoder there is a check for
connector_state->crtc which is properly initialized. I reached the issue
while testing some patches I haven't sent out yet, that remove the usage
of intel_connector->new_encoder from check_digital_port_conflicts(). In
that case, it would be possible to trigger the converted version of the
WARN in that function.
Signed-off-by: NAnder Conselvan de Oliveira <ander.conselvan.de.oliveira@intel.com>
[danvet: Add commit message augmentation Ander supplied.]
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

This will be helpful for adding future platforms. It is better to keep
the information in the single point of truth (the table) instead of
duplicating it into the validity function.

While at it, add dev_priv parameter to the function, also to prepare for
adding future platform support.
Signed-off-by: NJani Nikula <jani.nikula@intel.com>
Reviewed-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Index the gmbus tables directly using the pin instead of having a
confusing "port = i + 1" mapping. This finishes off removing the "gmbus
port" as a notion, and leaves us with just the "gmbus pin".

As pin 0 is invalid by definition and the gmbus tables will have a gap
at that index, add pin validity check to all the loops. This will be
benefitial for supporting platforms that have different numbers of pins,
or gaps.

v2: s/GMBUS_PIN_MAX/GMBUS_NUM_PINS/ (Ville, Daniel)
Reviewed-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: NJani Nikula <jani.nikula@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Rename intel_gmbus_is_port_valid to intel_gmbus_is_valid_pin, and rename
port parameters to pin as well. This matches usage all around, as
usually a pin is passed to the validity check function. No functional
changes.
Signed-off-by: NJani Nikula <jani.nikula@intel.com>
Reviewed-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

The specs refer to pin pairs. Start moving towards using pin rather than
port all around to avoid confusion. No functional changes.
Signed-off-by: NJani Nikula <jani.nikula@intel.com>
Reviewed-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>