- 18 12月, 2009 1 次提交
-
-
由 Robert Jennings 提交于
Memory balloon drivers can allocate a large amount of memory which is not movable but could be freed to accomodate memory hotplug remove. Prior to calling the memory hotplug notifier chain the memory in the pageblock is isolated. Currently, if the migrate type is not MIGRATE_MOVABLE the isolation will not proceed, causing the memory removal for that page range to fail. Rather than failing pageblock isolation if the migrateteype is not MIGRATE_MOVABLE, this patch checks if all of the pages in the pageblock, and not on the LRU, are owned by a registered balloon driver (or other entity) using a notifier chain. If all of the non-movable pages are owned by a balloon, they can be freed later through the memory notifier chain and the range can still be isolated in set_migratetype_isolate(). Signed-off-by: NRobert Jennings <rcj@linux.vnet.ibm.com> Cc: Mel Gorman <mel@csn.ul.ie> Cc: Ingo Molnar <mingo@elte.hu> Cc: Brian King <brking@linux.vnet.ibm.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Gerald Schaefer <geralds@linux.vnet.ibm.com> Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
- 16 12月, 2009 13 次提交
-
-
由 Andi Kleen 提交于
This is a simpler, gentler variant of memory_failure() for soft page offlining controlled from user space. It doesn't kill anything, just tries to invalidate and if that doesn't work migrate the page away. This is useful for predictive failure analysis, where a page has a high rate of corrected errors, but hasn't gone bad yet. Instead it can be offlined early and avoided. The offlining is controlled from sysfs, including a new generic entry point for hard page offlining for symmetry too. We use the page isolate facility to prevent re-allocation race. Normally this is only used by memory hotplug. To avoid races with memory allocation I am using lock_system_sleep(). This avoids the situation where memory hotplug is about to isolate a page range and then hwpoison undoes that work. This is a big hammer currently, but the simplest solution currently. When the page is not free or LRU we try to free pages from slab and other caches. The slab freeing is currently quite dumb and does not try to focus on the specific slab cache which might own the page. This could be potentially improved later. Thanks to Fengguang Wu and Haicheng Li for some fixes. [Added fix from Andrew Morton to adapt to new migrate_pages prototype] Signed-off-by: NAndi Kleen <ak@linux.intel.com>
-
由 Rafael J. Wysocki 提交于
It is not necessary to include <linux/rwsem.h> into drivers/base/power/main.c, so don't do that. Signed-off-by: NRafael J. Wysocki <rjw@sisk.pl>
-
由 Rafael J. Wysocki 提交于
In device_resume_noirq() there is the 'End' label and the associated goto statement that aren't strictly necessary, so rework the code to get rid of them. Also modify device_suspend_noirq() so that it looks completely analogous to device_resume_noirq(). Signed-off-by: NRafael J. Wysocki <rjw@sisk.pl>
-
由 Arjan van de Ven 提交于
In order to diagnose overall suspend/resume times, we need basic instrumentation to break down the total time into per device timing, similar to initcall_debug. This patch adds the basic timing instrumentation, needed for a scritps/bootgraph.pl equivalent or humans. The bootgraph.pl program is still a work in progress, but is far enough along to know that this patch is sufficient. Signed-off-by: NArjan van de Ven <arjan@linux.intel.com> Signed-off-by: NRafael J. Wysocki <rjw@sisk.pl>
-
由 Alan Stern 提交于
This patch (as1308c) fixes __pm_runtime_get(). Currently the routine will resume a device if the prior usage count was 0. But this isn't right; thanks to pm_runtime_get_noresume() the usage count can be positive even while the device is suspended. Signed-off-by: NAlan Stern <stern@rowland.harvard.edu> Signed-off-by: NRafael J. Wysocki <rjw@sisk.pl>
-
由 David Rientjes 提交于
Nodemasks should not be allocated on the stack for large systems (when it is larger than 256 bytes) since there is a threat of overflow. This patch causes the unregister_mem_sect_under_nodes() nodemask to be allocated on the stack for smaller systems and be allocated by slab for larger systems. GFP_KERNEL is used since remove_memory_block() can block. Cc: Gary Hade <garyhade@us.ibm.com> Cc: Badari Pulavarty <pbadari@us.ibm.com> Cc: Alex Chiang <achiang@hp.com> Signed-off-by: NDavid Rientjes <rientjes@google.com> Cc: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Alex Chiang 提交于
You can discover which CPUs belong to a NUMA node by examining /sys/devices/system/node/node#/ However, it's not convenient to go in the other direction, when looking at /sys/devices/system/cpu/cpu#/ Yes, you can muck about in sysfs, but adding these symlinks makes life a lot more convenient. Signed-off-by: NAlex Chiang <achiang@hp.com> Acked-by: NDavid Rientjes <rientjes@google.com> Cc: Gary Hade <garyhade@us.ibm.com> Cc: Badari Pulavarty <pbadari@us.ibm.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: David Rientjes <rientjes@google.com> Cc: Greg KH <greg@kroah.com> Cc: Randy Dunlap <randy.dunlap@oracle.com> Cc: David Rientjes <rientjes@google.com> Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Alex Chiang 提交于
By returning early if the node is not online, we can unindent the interesting code by two levels. No functional change. Signed-off-by: NAlex Chiang <achiang@hp.com> Cc: Gary Hade <garyhade@us.ibm.com> Cc: Badari Pulavarty <pbadari@us.ibm.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: David Rientjes <rientjes@google.com> Cc: Greg KH <greg@kroah.com> Cc: Randy Dunlap <randy.dunlap@oracle.com> Cc: David Rientjes <rientjes@google.com> Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Alex Chiang 提交于
By returning early if the node is not online, we can unindent the interesting code by one level. No functional change. Signed-off-by: NAlex Chiang <achiang@hp.com> Cc: Gary Hade <garyhade@us.ibm.com> Cc: Badari Pulavarty <pbadari@us.ibm.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: David Rientjes <rientjes@google.com> Cc: Greg KH <greg@kroah.com> Cc: Randy Dunlap <randy.dunlap@oracle.com> Cc: David Rientjes <rientjes@google.com> Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Alex Chiang 提交于
Commit c04fc586 (mm: show node to memory section relationship with symlinks in sysfs) created symlinks from nodes to memory sections, e.g. /sys/devices/system/node/node1/memory135 -> ../../memory/memory135 If you're examining the memory section though and are wondering what node it might belong to, you can find it by grovelling around in sysfs, but it's a little cumbersome. Add a reverse symlink for each memory section that points back to the node to which it belongs. Signed-off-by: NAlex Chiang <achiang@hp.com> Cc: Gary Hade <garyhade@us.ibm.com> Cc: Badari Pulavarty <pbadari@us.ibm.com> Cc: Ingo Molnar <mingo@elte.hu> Acked-by: NDavid Rientjes <rientjes@google.com> Cc: Greg KH <greg@kroah.com> Cc: Randy Dunlap <randy.dunlap@oracle.com> Cc: David Rientjes <rientjes@google.com> Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Lee Schermerhorn 提交于
Offload the registration and unregistration of per node hstate sysfs attributes to a worker thread rather than attempt the allocation/attachment or detachment/freeing of the attributes in the context of the memory hotplug handler. I don't know that this is absolutely required, but the registration can sleep in allocations and other mem hot plug handlers do it this way. If it turns out this is NOT required, we can drop this patch. N.B., Only tested build, boot, libhugetlbfs regression. i.e., no memory hotplug testing. Signed-off-by: NLee Schermerhorn <lee.schermerhorn@hp.com> Reviewed-by: NAndi Kleen <andi@firstfloor.org> Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Lee Schermerhorn <lee.schermerhorn@hp.com> Cc: Mel Gorman <mel@csn.ul.ie> Cc: Randy Dunlap <randy.dunlap@oracle.com> Cc: Nishanth Aravamudan <nacc@us.ibm.com> Cc: David Rientjes <rientjes@google.com> Cc: Adam Litke <agl@us.ibm.com> Cc: Andy Whitcroft <apw@canonical.com> Cc: Eric Whitney <eric.whitney@hp.com> Cc: Christoph Lameter <cl@linux-foundation.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Lee Schermerhorn 提交于
Register per node hstate attributes only for nodes with memory. As suggested by David Rientjes. With Memory Hotplug, memory can be added to a memoryless node and a node with memory can become memoryless. Therefore, add a memory on/off-line notifier callback to [un]register a node's attributes on transition to/from memoryless state. N.B., Only tested build, boot, libhugetlbfs regression. i.e., no memory hotplug testing. Signed-off-by: NLee Schermerhorn <lee.schermerhorn@hp.com> Reviewed-by: NAndi Kleen <andi@firstfloor.org> Acked-by: NDavid Rientjes <rientjes@google.com> Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Lee Schermerhorn <lee.schermerhorn@hp.com> Cc: Mel Gorman <mel@csn.ul.ie> Cc: Randy Dunlap <randy.dunlap@oracle.com> Cc: Nishanth Aravamudan <nacc@us.ibm.com> Cc: Adam Litke <agl@us.ibm.com> Cc: Andy Whitcroft <apw@canonical.com> Cc: Eric Whitney <eric.whitney@hp.com> Cc: Christoph Lameter <cl@linux-foundation.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Lee Schermerhorn 提交于
Add the per huge page size control/query attributes to the per node sysdevs: /sys/devices/system/node/node<ID>/hugepages/hugepages-<size>/ nr_hugepages - r/w free_huge_pages - r/o surplus_huge_pages - r/o The patch attempts to re-use/share as much of the existing global hstate attribute initialization and handling, and the "nodes_allowed" constraint processing as possible. Calling set_max_huge_pages() with no node indicates a change to global hstate parameters. In this case, any non-default task mempolicy will be used to generate the nodes_allowed mask. A valid node id indicates an update to that node's hstate parameters, and the count argument specifies the target count for the specified node. From this info, we compute the target global count for the hstate and construct a nodes_allowed node mask contain only the specified node. Setting the node specific nr_hugepages via the per node attribute effectively ignores any task mempolicy or cpuset constraints. With this patch: (me):ls /sys/devices/system/node/node0/hugepages/hugepages-2048kB ./ ../ free_hugepages nr_hugepages surplus_hugepages Starting from: Node 0 HugePages_Total: 0 Node 0 HugePages_Free: 0 Node 0 HugePages_Surp: 0 Node 1 HugePages_Total: 0 Node 1 HugePages_Free: 0 Node 1 HugePages_Surp: 0 Node 2 HugePages_Total: 0 Node 2 HugePages_Free: 0 Node 2 HugePages_Surp: 0 Node 3 HugePages_Total: 0 Node 3 HugePages_Free: 0 Node 3 HugePages_Surp: 0 vm.nr_hugepages = 0 Allocate 16 persistent huge pages on node 2: (me):echo 16 >/sys/devices/system/node/node2/hugepages/hugepages-2048kB/nr_hugepages [Note that this is equivalent to: numactl -m 2 hugeadmin --pool-pages-min 2M:+16 ] Yields: Node 0 HugePages_Total: 0 Node 0 HugePages_Free: 0 Node 0 HugePages_Surp: 0 Node 1 HugePages_Total: 0 Node 1 HugePages_Free: 0 Node 1 HugePages_Surp: 0 Node 2 HugePages_Total: 16 Node 2 HugePages_Free: 16 Node 2 HugePages_Surp: 0 Node 3 HugePages_Total: 0 Node 3 HugePages_Free: 0 Node 3 HugePages_Surp: 0 vm.nr_hugepages = 16 Global controls work as expected--reduce pool to 8 persistent huge pages: (me):echo 8 >/sys/kernel/mm/hugepages/hugepages-2048kB/nr_hugepages Node 0 HugePages_Total: 0 Node 0 HugePages_Free: 0 Node 0 HugePages_Surp: 0 Node 1 HugePages_Total: 0 Node 1 HugePages_Free: 0 Node 1 HugePages_Surp: 0 Node 2 HugePages_Total: 8 Node 2 HugePages_Free: 8 Node 2 HugePages_Surp: 0 Node 3 HugePages_Total: 0 Node 3 HugePages_Free: 0 Node 3 HugePages_Surp: 0 Signed-off-by: NLee Schermerhorn <lee.schermerhorn@hp.com> Acked-by: NMel Gorman <mel@csn.ul.ie> Reviewed-by: NAndi Kleen <andi@firstfloor.org> Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Randy Dunlap <randy.dunlap@oracle.com> Cc: Nishanth Aravamudan <nacc@us.ibm.com> Cc: David Rientjes <rientjes@google.com> Cc: Adam Litke <agl@us.ibm.com> Cc: Andy Whitcroft <apw@canonical.com> Cc: Eric Whitney <eric.whitney@hp.com> Cc: Christoph Lameter <cl@linux-foundation.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 12 12月, 2009 10 次提交
-
-
由 Alan Stern 提交于
This patch (as1310) works around a race in dev_driver_string(). If the device is unbound while the function is running, dev->driver might become NULL after we test it and before we dereference it. Signed-off-by: NAlan Stern <stern@rowland.harvard.edu> Cc: stable <stable@kernel.org> Cc: Oliver Neukum <oliver@neukum.org> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Magnus Damm 提交于
Add early_platform_init_buffer() support and update the early platform driver code to allow passing parameters to the driver on the kernel command line. early_platform_init_buffer() simply allows early platform drivers to provide a pointer and length to a memory area where the remaining part of the kernel command line option will be stored. Needed to pass baud rate and other serial port options to the reworked early serial console code on SuperH. Signed-off-by: NMagnus Damm <damm@opensource.se> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Eric W. Biederman 提交于
device_shutdown is defined to just shutdown the hardware and to not clean up any kernel data structures. Therefore don't put the kobjects for /sys/dev and /sys/dev/block and /sys/dev/char. This ensures we don't remove /sys/dev/block and /sys/dev/char while we still have symlinks from there to the actual devices. Acked-by: NKay Sievers <kay.sievers@vrfy.org> Signed-off-by: NEric W. Biederman <ebiederm@aristanetworks.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Johannes Berg 提交于
Unfortunately, one cannot hold on to the struct firmware that request_firmware_nowait() hands off, which is needed in some cases. Allow this by requiring the callback to free it (via release_firmware). Additionally, give it a gfp_t parameter -- all the current users call it from a GFP_KERNEL context so the GFP_ATOMIC isn't necessary. This also marks an API break which is useful in a sense, although that is obviously not the primary purpose of this change. Signed-off-by: NJohannes Berg <johannes@sipsolutions.net> Acked-by: NMarcel Holtmann <marcel@holtmann.org> Cc: Ming Lei <tom.leiming@gmail.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: David Woodhouse <David.Woodhouse@intel.com> Cc: Pavel Roskin <proski@gnu.org> Cc: Abhay Salunke <abhay_salunke@dell.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Kay Sievers 提交于
Signed-off-by: NKay Sievers <kay.sievers@vrfy.org> Cc: Mark Rosenstand <rosenstand@gmail.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Kay Sievers 提交于
Signed-off-by: NKay Sievers <kay.sievers@vrfy.org> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Kay Sievers 提交于
Signed-off-by: NKay Sievers <kay.sievers@vrfy.org> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Kay Sievers 提交于
Signed-off-by: NKay Sievers <kay.sievers@vrfy.org> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Kay Sievers 提交于
Signed-off-by: NKay Sievers <kay.sievers@vrfy.org> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Kay Sievers 提交于
Signed-off-by: NKay Sievers <kay.sievers@vrfy.org> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
- 09 12月, 2009 2 次提交
-
-
由 Gautham R Shenoy 提交于
Currently the cpu-allocation/deallocation process comprises of two steps: - Set the indicators and to update the device tree with DLPAR node information. - Online/offline the allocated/deallocated CPU. This is achieved by writing to the sysfs tunables "probe" during allocation and "release" during deallocation. At the sametime, the userspace can independently online/offline the CPUs of the system using the sysfs tunable "online". It is quite possible that when a userspace tool offlines a CPU for the purpose of deallocation and is in the process of updating the device tree, some other userspace tool could bring the CPU back online by writing to the "online" sysfs tunable thereby causing the deallocate process to fail. The solution to this is to serialize writes to the "probe/release" sysfs tunable with the writes to the "online" sysfs tunable. This patch employs a mutex to provide this serialization, which is a no-op on all architectures except PPC_PSERIES Signed-off-by: NGautham R Shenoy <ego@in.ibm.com> Acked-by: NVaidyanathan Srinivasan <svaidy@linux.vnet.ibm.com> Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
由 Nathan Fontenot 提交于
Version 3 of this patch is updated with documentation added to Documentation/ABI. There are no changes to any of the C code from v2 of the patch. In order to support kernel DLPAR of CPU resources we need to provide an interface to add (probe) and remove (release) the resource from the system. This patch Creates new generic probe and release sysfs files to facilitate cpu probe/release. The probe/release interface provides for allowing each arch to supply their own routines for implementing the backend of adding and removing cpus to/from the system. This also creates the powerpc specific stubs to handle the arch callouts from writes to the sysfs files. The creation and use of these files is regulated by the CONFIG_ARCH_CPU_PROBE_RELEASE option so that only architectures that need the capability will have the files created. Signed-off-by: NNathan Fontenot <nfont@austin.ibm.com> Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
- 06 12月, 2009 4 次提交
-
-
由 Rafael J. Wysocki 提交于
Some braces in __pm_runtime_set_status() are not necessary, so remove them. Signed-off-by: NRafael J. Wysocki <rjw@sisk.pl>
-
由 Rafael J. Wysocki 提交于
The runtime PM core code assumes that dev->power.timer_expires is nonzero when the timer is scheduled, but it may become zero incidentally in pm_schedule_suspend(). Prevent this from happening by bumping dev->power.timer_expires up to 1 if it's 0 before calling mod_timer(). Signed-off-by: NRafael J. Wysocki <rjw@sisk.pl> Reported-by: NAlan Stern <stern@rowland.harvard.edu>
-
由 Alan Stern 提交于
This patch (as1307) adds a small optimization to __pm_request_resume(). If the device is currently being suspended, there's no need to queue a work routine to resume it. Setting the deferred_resume flag will suffice. (There's also a minor improvement to the function's code layout: An unnecessary "else" is removed.) Also, the patch clarifies the usage of the deferred_resume flag. It is meaningful only while a suspend is in progress, so it should be cleared just before a suspend starts, not just after one ends. Signed-off-by: NAlan Stern <stern@rowland.harvard.edu> Signed-off-by: NRafael J. Wysocki <rjw@sisk.pl>
-
由 Rafael J. Wysocki 提交于
Lockdep complains about taking the parent lock in __pm_runtime_set_status(), so mark it as nested. Signed-off-by: NRafael J. Wysocki <rjw@sisk.pl> Reported-by: NAlan Stern <stern@rowland.harvard.edu> Cc: stable@kernel.org
-
- 04 12月, 2009 1 次提交
-
-
由 André Goddard Rosa 提交于
That is "success", "unknown", "through", "performance", "[re|un]mapping" , "access", "default", "reasonable", "[con]currently", "temperature" , "channel", "[un]used", "application", "example","hierarchy", "therefore" , "[over|under]flow", "contiguous", "threshold", "enough" and others. Signed-off-by: NAndré Goddard Rosa <andre.goddard@gmail.com> Signed-off-by: NJiri Kosina <jkosina@suse.cz>
-
- 29 11月, 2009 1 次提交
-
-
由 Alan Stern 提交于
This patch (as1305) fixes a bug in the irq-enable settings and removes some related overhead in the runtime PM code. In __pm_runtime_resume(), within the scope of the original spin_lock_irq(), we know that irqs are disabled. There's no reason to go through a pair of enable/disable cycles when acquiring and releasing the parent's lock. In __pm_runtime_set_status(), irqs are already disabled when the parent's lock is acquired, and they must remain disabled when it is released. Signed-off-by: NAlan Stern <stern@rowland.harvard.edu> Signed-off-by: NRafael J. Wysocki <rjw@sisk.pl>
-
- 25 11月, 2009 1 次提交
-
-
由 Vivek Goyal 提交于
o kdump functionality reserves a per cpu area at boot time and exports the physical address of that area to user space through sys interface. This area stores some dump related information like cpu register states etc at the time of crash. o We were assuming that per cpu area always come from linearly mapped meory region and using __pa() to determine physical address. With percpu_alloc=page, per cpu area can come from vmalloc region also and __pa() breaks. o This patch implments a new function to convert per cpu address to physical address. Before the patch, crash_notes addresses looked as follows. cpu0 60fffff49800 cpu1 60fffff60800 cpu2 60fffff77800 These are bogus phsyical addresses. After the patch, address are following. cpu0 13eb44000 cpu1 13eb43000 cpu2 13eb42000 cpu3 13eb41000 These look fine. I got 4G of memory and /proc/iomem tell me following. 100000000-13fffffff : System RAM tj: * added missing asm/io.h include reported by Stephen Rothwell * repositioned per_cpu_ptr_phys() in percpu.c and added comment. Signed-off-by: NVivek Goyal <vgoyal@redhat.com> Signed-off-by: NTejun Heo <tj@kernel.org> Cc: Stephen Rothwell <sfr@canb.auug.org.au>
-
- 03 11月, 2009 2 次提交
-
-
由 Pavel Machek 提交于
pm_runtime_idle() is somewhat noisy. Remove debug prints. Signed-off-by: NPavel Machek <pavel@ucw.cz> Signed-off-by: NRafael J. Wysocki <rjw@sisk.pl>
-
由 Romit Dasgupta 提交于
Fixes the point where we need to complete the power transition when device suspend fails, so that we don't print warnings about devices added to the device hierarchy after a failing suspend. [rjw: Modified changelog.] Signed-off-by: NRomit Dasgupta <romit@ti.com> Signed-off-by: NRafael J. Wysocki <rjw@sisk.pl>
-
- 31 10月, 2009 2 次提交
-
-
由 Dmitry Torokhov 提交于
Platform drivers registered via platform_driver_probe() can be bound to devices only once, upon registration, because discard their probe() routines to save memory. Unbinding the driver through sysfs 'unbind' leaves the device stranded and confuses users so let's not create bind and unbind attributes for such drivers. Signed-off-by: NDmitry Torokhov <dtor@mail.ru> Cc: Éric Piel <eric.piel@tremplin-utc.net> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Stas Sergeev 提交于
In this patch: http://git.kernel.org/?p=linux/kernel/git/torvalds/linux-2.6.git;a=commitdiff;h=16dc42e018c2868211b4928f20a957c0c216126c the check was added for another driver to already claim the same device on the same bus. But the returned error code was wrong: to modprobe, the -EEXIST means that _this_ driver is already installed. It therefore doesn't produce the needed error message when _another_ driver is trying to register for the same device. Returning -EBUSY fixes the problem. Signed-off-by: NStas Sergeev <stsp@aknet.ru> Cc: stable <stable@kernel.org> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
- 22 9月, 2009 2 次提交
-
-
由 KOSAKI Motohiro 提交于
Recently we encountered OOM problems due to memory use of the GEM cache. Generally a large amuont of Shmem/Tmpfs pages tend to create a memory shortage problem. We often use the following calculation to determine the amount of shmem pages: shmem = NR_ACTIVE_ANON + NR_INACTIVE_ANON - NR_ANON_PAGES however the expression does not consider isolated and mlocked pages. This patch adds explicit accounting for pages used by shmem and tmpfs. Signed-off-by: NKOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Acked-by: NRik van Riel <riel@redhat.com> Reviewed-by: NChristoph Lameter <cl@linux-foundation.org> Acked-by: NWu Fengguang <fengguang.wu@intel.com> Cc: David Rientjes <rientjes@google.com> Cc: Hugh Dickins <hugh.dickins@tiscali.co.uk> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 KOSAKI Motohiro 提交于
The amount of memory allocated to kernel stacks can become significant and cause OOM conditions. However, we do not display the amount of memory consumed by stacks. Add code to display the amount of memory used for stacks in /proc/meminfo. Signed-off-by: NKOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Reviewed-by: NChristoph Lameter <cl@linux-foundation.org> Reviewed-by: NMinchan Kim <minchan.kim@gmail.com> Reviewed-by: NRik van Riel <riel@redhat.com> Cc: David Rientjes <rientjes@google.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 20 9月, 2009 1 次提交
-
-
由 Kay Sievers 提交于
This allows subsytems to provide devtmpfs with non-default permissions for the device node. Instead of the default mode of 0600, null, zero, random, urandom, full, tty, ptmx now have a mode of 0666, which allows non-privileged processes to access standard device nodes in case no other userspace process applies the expected permissions. This also fixes a wrong assignment in pktcdvd and a checkpatch.pl complain. Signed-off-by: NKay Sievers <kay.sievers@vrfy.org> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-