- 21 3月, 2012 25 次提交
-
-
由 Corentin Chary 提交于
- don't output error when probing features at load - print the SABI signature if samsung_sabi_init() succeed Signed-off-by: NCorentin Chary <corentincj@iksaif.net> Acked-by: NGreg Kroah-Hartman <gregkh@suse.de> Signed-off-by: NMatthew Garrett <mjg@redhat.com>
-
由 Corentin Chary 提交于
We still need to figure out exactly what each of different fields represent, but they contain at least model and version informations. Signed-off-by: NCorentin Chary <corentincj@iksaif.net> Acked-by: NGreg Kroah-Hartman <gregkh@suse.de> Signed-off-by: NMatthew Garrett <mjg@redhat.com>
-
由 Corentin Chary 提交于
This enable the driver for everything that look like a laptop and is from vendor "SAMSUNG ELECTRONICS CO., LTD.". Note that laptop supported by samsung-q10 seem to have a different vendor strict. Also remove every log output until we know that we have a SABI interface (except if the driver is forced to load, or debug is enabled). Keeping a whitelist of laptop with a model granularity is something that can't work without close vendor cooperation (and we don't have that). Signed-off-by: NCorentin Chary <corentincj@iksaif.net> Acked-by: NGreg Kroah-Hartman <gregkh@suse.de> Signed-off-by: NMatthew Garrett <mjg@redhat.com>
-
由 Corentin Chary 提交于
The wireless status get and get commands seems to use one byte per device. First byte is for wlan and third is for bluetooh, we will have to find what the other are for. Signed-off-by: NCorentin Chary <corentincj@iksaif.net> Acked-by: NGreg Kroah-Hartman <gregkh@suse.de> Signed-off-by: NMatthew Garrett <mjg@redhat.com>
-
由 Corentin Chary 提交于
Signed-off-by: NCorentin Chary <corentincj@iksaif.net> Acked-by: NGreg Kroah-Hartman <gregkh@suse.de> Signed-off-by: NMatthew Garrett <mjg@redhat.com>
-
由 Corentin Chary 提交于
Signed-off-by: NCorentin Chary <corentincj@iksaif.net> Acked-by: NGreg Kroah-Hartman <gregkh@suse.de> Signed-off-by: NMatthew Garrett <mjg@redhat.com>
-
由 Corentin Chary 提交于
Signed-off-by: NCorentin Chary <corentincj@iksaif.net> Acked-by: NGreg Kroah-Hartman <gregkh@suse.de> Signed-off-by: NMatthew Garrett <mjg@redhat.com>
-
由 Corentin Chary 提交于
Signed-off-by: NCorentin Chary <corentincj@iksaif.net> Acked-by: NGreg Kroah-Hartman <gregkh@suse.de> Signed-off-by: NMatthew Garrett <mjg@redhat.com>
-
由 Corentin Chary 提交于
We can now do the self test using debugfs, so remove the code and keep the debug flag to enable more traces. Signed-off-by: NCorentin Chary <corentincj@iksaif.net> Acked-by: NGreg Kroah-Hartman <gregkh@suse.de> Signed-off-by: NMatthew Garrett <mjg@redhat.com>
-
由 Corentin Chary 提交于
This allow to call arbitrary sabi commands wihout modifying the driver at all. For example, setting the keyboard backlight brightness to 5 using debugfs interface can be done like that: ; Set the command echo 0x78 > command ; Set the data echo 0x0582 > d0 ; Fill the rest with 0 echo 0 > d1 echo 0 > d2 echo 0 > d3 ; And issue the command cat call Signed-off-by: NCorentin Chary <corentincj@iksaif.net> Acked-by: NGreg Kroah-Hartman <gregkh@suse.de> Signed-off-by: NMatthew Garrett <mjg@redhat.com>
-
由 Corentin Chary 提交于
* SABI command are on 16 bits, not 8 * SABI can read/write up to 11 byte of data * There is not real difference between "get" and "set" commands, so refactorise the code of both functions Signed-off-by: NCorentin Chary <corentincj@iksaif.net> Acked-by: NGreg Kroah-Hartman <gregkh@suse.de> Signed-off-by: NMatthew Garrett <mjg@redhat.com>
-
由 Corentin Chary 提交于
Will be usefull later when we will have more platform sysfs files like battery_life_extender or usb_charge. Signed-off-by: NCorentin Chary <corentincj@iksaif.net> Acked-by: NGreg Kroah-Hartman <gregkh@suse.de> Signed-off-by: NMatthew Garrett <mjg@redhat.com>
-
由 Corentin Chary 提交于
samsung-laptop is not at all related to ACPI, but since this interface is not documented at all, and the driver has to use it at load to understand how it works on the laptop, I think it's a good idea to disable it if a better solution is available. Signed-off-by: NCorentin Chary <corentincj@iksaif.net> Signed-off-by: NMatthew Garrett <mjg@redhat.com>
-
由 Corentin Chary 提交于
Create _init()/_exit() function for each subsystem, remove the local struct samsung_laptop * and only keep a struct platform_device * that can only be used in samsung_init() and samsung_exit(). Signed-off-by: NCorentin Chary <corentincj@iksaif.net> Acked-by: NGreg Kroah-Hartman <gregkh@suse.de> Signed-off-by: NMatthew Garrett <mjg@redhat.com>
-
由 Corentin Chary 提交于
Even if this driver can only be loaded once, it is still a good idea to create some kind of context structure. Signed-off-by: NCorentin Chary <corentincj@iksaif.net> Acked-by: NGreg Kroah-Hartman <gregkh@suse.de> Signed-off-by: NMatthew Garrett <mjg@redhat.com>
-
由 Axel Lin 提交于
This patch converts the drivers in drivers/platform/x86/* to use the module_platform_driver() macro which makes the code smaller and a bit simpler. Cc: Hong Liu <hong.liu@intel.com> Cc: Durgadoss R <durgadoss.r@intel.com> Cc: Daniel Drake <dsd@laptop.org> Signed-off-by: NAxel Lin <axel.lin@gmail.com> Signed-off-by: NMatthew Garrett <mjg@redhat.com>
-
由 Borislav Petkov 提交于
Turn off the following triggered with gcc 4.6.1 on Debian testing: drivers/platform/x86/hdaps.c: In function ‘hdaps_temp2_show’: drivers/platform/x86/hdaps.c:398:16: warning: ‘temp’ may be used uninitialized in this function [-Wuninitialized] drivers/platform/x86/hdaps.c: In function ‘hdaps_temp1_show’: drivers/platform/x86/hdaps.c:385:16: warning: ‘temp’ may be used uninitialized in this function [-Wuninitialized] Cc: Frank Seidel <frank@f-seidel.de> Cc: Matthew Garrett <mjg@redhat.com> Cc: platform-driver-x86@vger.kernel.org Signed-off-by: NBorislav Petkov <bp@alien8.de> Signed-off-by: NMatthew Garrett <mjg@redhat.com>
-
由 AceLan Kao 提交于
Add "Vostro 3555", "Inspiron N311z", and "Inspiron M5110" into quirks, so that they could have touchpad LED function work. Signed-off-by: NAceLan Kao <acelan.kao@canonical.com> Signed-off-by: NMatthew Garrett <mjg@redhat.com>
-
由 John Hughes 提交于
Fix scancodes returned by driver to match scancodes used to remap keys. (Before the patch FN/E returned scancode 0x1B, but to remap scancode 0x14 had to be used). The scancodes returned by the sony-laptop driver for function keys did not match the scancodes used to remap keys. Also, since the scancode was sent to the input subsystem after the mapped keysym the /lib/udev/keymap utility was confused about which scancode to report for which keysym. This patch fixes the driver so the correct scancode is shown for each key. It also adds to the documentation a description of where to find the scancodes. Signed-off-by: NJohn Hughes <john@calva.com> Acked-by: NDmitry Torokhov <dtor@mail.ru> Signed-off-by: NMatthew Garrett <mjg@redhat.com>
-
由 Alan Cox 提交于
All the production devices use the PC compatible version of this device so don't use the SCU interfaces or the SCU firmware interfaces. Delete lots of code and conditional paths Signed-off-by: NAlan Cox <alan@linux.intel.com> Signed-off-by: NMatthew Garrett <mjg@redhat.com>
-
由 Dmitry Torokhov 提交于
Use MODULE_DEVCE_TABLE instead of rolling MODULE_ALIAS by hand. Signed-off-by: NDmitry Torokhov <dtor@mail.ru> Signed-off-by: NMatthew Garrett <mjg@redhat.com>
-
由 Dmitry Torokhov 提交于
Use MODULE_DEVCE_TABLE instead of rolling MODULE_ALIAS by hand. Signed-off-by: NDmitry Torokhov <dtor@mail.ru> Signed-off-by: NMatthew Garrett <mjg@redhat.com>
-
由 Dmitry Torokhov 提交于
Use MODULE_DEVCE_TABLE instead of rolling MODULE_ALIAS by hand. Signed-off-by: NDmitry Torokhov <dtor@mail.ru> Signed-off-by: NMatthew Garrett <mjg@redhat.com>
-
由 Marcos Paulo de Souza 提交于
Signed-off-by: NMarcos Paulo de Souza <marcos.mage@gmail.com> Signed-off-by: NMatthew Garrett <mjg@redhat.com>
-
由 Josh Boyer 提交于
When the keyboard backlight support was originally added, the commit said to default it to on with a 10 second timeout. That actually wasn't the case, as the default value is commented out for the kbd_backlight parameter. Because it is a static variable, it gets set to 0 by default without some other form of initialization. However, it seems the function to set the value wasn't actually called immediately, so whatever state the keyboard was in initially would remain. Then commit df410d52 was introduced during the 2.6.39 timeframe to immediately set whatever value was present (as well as attempt to restore/reset the state on module removal or resume). That seems to have now forced the light off immediately when the module is loaded unless the option kbd_backlight=1 is specified. Let's enable it by default again (for the first time). This should solve https://bugzilla.redhat.com/show_bug.cgi?id=728478Signed-off-by: NJosh Boyer <jwboyer@redhat.com> Acked-by: NMattia Dongili <malattia@linux.it> Signed-off-by: NMatthew Garrett <mjg@redhat.com>
-
- 12 3月, 2012 4 次提交
-
-
由 Xi Wang 提交于
num_sifr could go negative since acpi_pcc_get_sqty() returns -EINVAL on error. Then it could bypass the sanity check (num_sifr > 255). The subsequent call to kzalloc() would allocate a small buffer, leading to a memory corruption. Signed-off-by: NXi Wang <xi.wang@gmail.com> Signed-off-by: NMatthew Garrett <mjg@redhat.com>
-
由 Ike Panhc 提交于
We have several reports which says acer-wmi is loaded on ideapads and register rfkill for wifi which can not be unblocked. Since ideapad-laptop also register rfkill for wifi and it works reliably, it will be fine acer-wmi is not going to register rfkill for wifi once VPC2004 is found. Also put IBM0068/LEN0068 in the list. Though thinkpad_acpi has no wifi rfkill capability, there are reports which says acer-wmi also block wireless on Thinkpad E520/E420. Signed-off-by: NIke Panhc <ike.pan@canonical.com> Signed-off-by: NMatthew Garrett <mjg@redhat.com>
-
由 Robert Gerlach 提交于
This patch adds support for some of the devices within a wide variety of Fujitsu Tablet Computers, both convertibles and slates. Primarily it allows for the automatic detection of the tablet/notebook mode for convertible tablet pc's, and orientation for docked slates. It also adds support for the application panel buttons usually found next to the tablet screen, and docking station detection for slates. Signed-off-by: NRobert Gerlach <khnz@gmx.de> Signed-off-by: NMatthew Garrett <mjg@redhat.com>
-
由 Ben Hutchings 提交于
An rfkill driver based on the fsaa1655g and fsam7440 drivers for Fujitsu-Siemens Amilo A1655 and M7440 models found at: http://sourceforge.net/projects/fsaa1655g/ http://sourceforge.net/projects/fsam7440/ This adds DMI matching, replaces the procfs files with rfkill devices, and uses the proper functions to write to the i8042 safely. Signed-off-by: NBen Hutchings <ben@decadent.org.uk> Signed-off-by: NMatthew Garrett <mjg@redhat.com>
-
- 22 2月, 2012 1 次提交
-
-
由 Hitoshi Mitake 提交于
This provides unified readq()/writeq() helper functions for 32-bit drivers. For some cases, readq/writeq without atomicity is harmful, and order of io access has to be specified explicitly. So in this patch, new two header files which contain non-atomic readq/writeq are added. - <asm-generic/io-64-nonatomic-lo-hi.h> provides non-atomic readq/ writeq with the order of lower address -> higher address - <asm-generic/io-64-nonatomic-hi-lo.h> provides non-atomic readq/ writeq with reversed order This allows us to remove some readq()s that were added drivers when the default non-atomic ones were removed in commit dbee8a0a ("x86: remove 32-bit versions of readq()/writeq()") The drivers which need readq/writeq but can do with the non-atomic ones must add the line: #include <asm-generic/io-64-nonatomic-lo-hi.h> /* or hi-lo.h */ But this will be nop in 64-bit environments, and no other #ifdefs are required. So I believe that this patch can solve the problem of 1. driver-specific readq/writeq 2. atomicity and order of io access This patch is tested with building allyesconfig and allmodconfig as ARCH=x86 and ARCH=i386 on top of tip/master. Cc: Kashyap Desai <Kashyap.Desai@lsi.com> Cc: Len Brown <lenb@kernel.org> Cc: Ravi Anand <ravi.anand@qlogic.com> Cc: Vikas Chaudhary <vikas.chaudhary@qlogic.com> Cc: Matthew Garrett <mjg@redhat.com> Cc: Jason Uhlenkott <juhlenko@akamai.com> Cc: James Bottomley <James.Bottomley@parallels.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Roland Dreier <roland@purestorage.com> Cc: James Bottomley <jbottomley@parallels.com> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Cc: Matthew Wilcox <matthew.r.wilcox@intel.com> Cc: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: NHitoshi Mitake <h.mitake@gmail.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 13 1月, 2012 1 次提交
-
-
由 Rusty Russell 提交于
module_param(bool) used to counter-intuitively take an int. In fddd5201 (mid-2009) we allowed bool or int/unsigned int using a messy trick. It's time to remove the int/unsigned int option. For this version it'll simply give a warning, but it'll break next kernel version. Acked-by: NMauro Carvalho Chehab <mchehab@redhat.com> Signed-off-by: NRusty Russell <rusty@rustcorp.com.au>
-
- 04 1月, 2012 3 次提交
-
-
由 Al Viro 提交于
both proc_dir_entry ->mode and populating functions Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
由 Al Viro 提交于
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
由 Al Viro 提交于
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
- 22 12月, 2011 1 次提交
-
-
由 Kay Sievers 提交于
The sysdev.h file should not be needed by any in-kernel code, so remove the .h file from these random files that seem to still want to include it. The sysdev code will be going away soon, so this include needs to be removed no matter what. Cc: Jiandong Zheng <jdzheng@broadcom.com> Cc: Scott Branden <sbranden@broadcom.com> Cc: Russell King <linux@arm.linux.org.uk> Cc: Kukjin Kim <kgene.kim@samsung.com> Cc: David Brown <davidb@codeaurora.org> Cc: Daniel Walker <dwalker@fifo99.com> Cc: Bryan Huntsman <bryanh@codeaurora.org> Cc: Ben Dooks <ben-linux@fluff.org> Cc: Wan ZongShun <mcuos.com@gmail.com> Cc: Haavard Skinnemoen <hskinnemoen@gmail.com> Cc: Hans-Christian Egtvedt <egtvedt@samfundet.no> Cc: Guan Xuetao <gxt@mprc.pku.edu.cn> Cc: "Venkatesh Pallipadi Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Grant Likely <grant.likely@secretlab.ca> Cc: Richard Purdie <rpurdie@rpsys.net> Cc: Matthew Garrett <mjg@redhat.com> Signed-off-by: NKay Sievers <kay.sievers@vrfy.org>
-
- 18 12月, 2011 1 次提交
-
-
由 Alan Cox 提交于
We need to depend on INTEL_MID because the SCU is Moorestown and Medfield. Signed-off-by: NAlan Cox <alan@linux.intel.com> Cc: mjg@redhat.com Link: http://lkml.kernel.org/r/20111217174215.7096.7786.stgit@bob.linux.org.ukSigned-off-by: NIngo Molnar <mingo@elte.hu>
-
- 15 12月, 2011 1 次提交
-
-
由 Kay Sievers 提交于
After all sysdev classes are ported to regular driver core entities, the sysdev implementation will be entirely removed from the kernel. Cc: Matthew Garrett <mjg@redhat.com> Signed-off-by: NKay Sievers <kay.sievers@vrfy.org> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
- 06 12月, 2011 1 次提交
-
-
由 Seth Forshee 提交于
The Satellite C670-10V generates notifications for hotkeys but does not support HCI_SYSTEM_EVENT. As a result when a hotkey is pressed it gets stuck in an infinite loop in toshiba_acpi_notify. To fix this, detect whether or not HCI_SYSTEM_EVENT is supported up-front and don't try to read system events if it isn't supported. In addition, limit the number of retries when reading HCI_SYSTEM_EVENT fails so that this loop cannot run unbounded. Signed-off-by: NSeth Forshee <seth.forshee@canonical.com> Signed-off-by: NMatthew Garrett <mjg@redhat.com>
-
- 22 11月, 2011 1 次提交
-
-
由 Tejun Heo 提交于
Writeback and thinkpad_acpi have been using thaw_process() to prevent deadlock between the freezer and kthread_stop(); unfortunately, this is inherently racy - nothing prevents freezing from happening between thaw_process() and kthread_stop(). This patch implements kthread_freezable_should_stop() which enters refrigerator if necessary but is guaranteed to return if kthread_stop() is invoked. Both thaw_process() users are converted to use the new function. Note that this deadlock condition exists for many of freezable kthreads. They need to be converted to use the new should_stop or freezable workqueue. Tested with synthetic test case. Signed-off-by: NTejun Heo <tj@kernel.org> Acked-by: NHenrique de Moraes Holschuh <ibm-acpi@hmh.eng.br> Cc: Jens Axboe <axboe@kernel.dk> Cc: Oleg Nesterov <oleg@redhat.com>
-
- 17 11月, 2011 1 次提交
-
-
由 Randy Dunlap 提交于
Fix build warnings: drivers/platform/x86/dell-laptop.c:592:13: warning: function declaration isn't a prototype drivers/platform/x86/dell-laptop.c:599:13: warning: function declaration isn't a prototype Signed-off-by: NRandy Dunlap <rdunlap@xenotime.net> Cc: Matthew Garrett <mjg@redhat.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-