- Fixed memory leak by freeing memory allocated for device_config.
Signed-off-by: NSreenivasa Honnur <sreenivasa.honnur@neterion.com>
Signed-off-by: NRamkrishna Vepa <ram.vepa@neterion.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

- Removed ioremap of bar1 address
  Driver needs only bar0 address for register access
- Removed references to bar1 and bar2 addresses
Signed-off-by: NSreenivasa Honnur <sreenivasa.honnur@neterion.com>
Signed-off-by: NRamkrishna Vepa <ram.vepa@neterion.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This patch is the result of an automatic spatch transformation to convert
all ndo_start_xmit() return values of 0 to NETDEV_TX_OK.

Some occurences are missed by the automatic conversion, those will be
handled in a seperate patch.
Signed-off-by: NPatrick McHardy <kaber@trash.net>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

- Enabled SRIOV support in the driver.
- Call __vxge_hw_verify_pci_e_info() for the PF only. This function
  verifies the negotiated link width and current link speed in the
  Link Status Register (offset 12h) which are reserved fields for VFs
  as per the SRIOV specification, section 3.5.8.
- Implemented David Miller's comment to remove the #ifdef CONFIG_PCI_IOV as
  these intefaces have NOP versions declared when the defintion is not set.
Signed-off-by: NSivakumar Subramani <sivakumar.subramani@neterion.com>
Signed-off-by: NRastapur Santosh <santosh.rastapur@neterion.com>
Signed-off-by: NRamkrishna Vepa <ram.vepa@neterion.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

vfree() does its own 'NULL' check, so no need for check before
calling it.
Signed-off-by: NFigo.zhang <figo1802@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Followup of commits 9d21493b
and 08baf561
(net: tx scalability works : trans_start)
(net: txq_trans_update() helper)

Now that core network takes care of trans_start updates, dont do it
in drivers themselves, if possible. Multi queue drivers can
avoid one cache miss (on dev->trans_start) in their start_xmit()
handler.

Exceptions are NETIF_F_LLTX drivers (vxge & tehuti)
Signed-off-by: NEric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

FIFO1_DMA_ERR is set twice, the second should be FIFO2_DMA_ERR.
Signed-off-by: NRoel Kluin <roel.kluin@gmail.com>
Acked-by: NRam Vepa <ram.vepa@neterion.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This reverts commit 01198304.

Causes warnings in the build as reported by Stephen Rothwell.
So this change is worse than what it's curing.
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Signed-off-by: NAlexander Beregalov <a.beregalov@gmail.com>
Acked-by: NRam Vepa <ram.vepa@neterion.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

If vpath is NULL then hldev is NULL also.
Signed-off-by: NAlexander Beregalov <a.beregalov@gmail.com>
Acked-by: NRam Vepa <ram.vepa@neterion.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Fix this build error:

drivers/net/vxge/vxge-main.c: In function 'vxge_get_vpath_no':
drivers/net/vxge/vxge-main.c:695: error: dereferencing pointer to
incomplete type
...
Signed-off-by: NAlexander Beregalov <a.beregalov@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

- Kconfig and Makefile related changes for vxge driver.

- No changes in current submission.

- Changes from previous submission -
 - Incorporated the following review comments as per Bill Flink:
        - Add dependancy on INET along with PCI
        - Remove dependancy on INET_LRO and add GRO support.
 - Made this patch as last patch as per Ben Hutchings comments.
Signed-off-by: NSivakumar Subramani <sivakumar.subramani@neterion.com>
Signed-off-by: NRastapur Santosh <santosh.rastapur@neterion.com>
Signed-off-by: NRamkrishna Vepa <ram.vepa@neterion.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

- Driver version

- Changes from previous submission -
 - Updated driver version.
Signed-off-by: NSivakumar Subramani <sivakumar.subramani@neterion.com>
Signed-off-by: NRastapur Santosh <santosh.rastapur@neterion.com>
Signed-off-by: NRamkrishna Vepa <ram.vepa@neterion.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This patch implements all ethtool related entry point functions for the driver.

- Changes in this submission -
        - Removed redundant #include statements

- Changes in previous submissions -
        - Removed unused statistics.
        - General clean up - removed unused variables and macros.
 - Incorporated following comments from Ben Hutchings
        - No need to restart the interface in vxge_ethtool_sset
        - Do not use #ifdef ADVERTISED_XX
        - Remove unnecessart intermediate copy in vxge_ethtool_gdrvinfo
        - Use strlcpy() to ensure null-termination.
        - Use ethtool_op_get_tso, ethtool_op_set_tx_hw_csum instead
          of redefining the same code.
        - Implement get_strings_count instead of deprecated get_stats_count.
        - Don't report reporting the EEPROM length as we don't supprt
          get/set eeprom.
        - Don't set self_test_count as we don't support any self tests.
Signed-off-by: NSivakumar Subramani <sivakumar.subramani@neterion.com>
Signed-off-by: NRastapur Santosh <santosh.rastapur@neterion.com>
Signed-off-by: NRamkrishna Vepa <ram.vepa@neterion.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This patch implements all the driver entry point functions.
- Definition of all module loadable paramters.
- Implementation of all driver entry point functions.

- Changes in this submission -
        - Fixed compilation error when enabling debug statements
        - Fixed few warnings when CONFIG_PCI_MSI is not defined
        - Removed unnecessary volatile variables
        - Removed compare_ether_addr as it causes unaligned memory access on
          the sparc64 platform.

- Changes in previous submissions -
        - As per Stephen Hemminger's comments removed the following loadable
          parameters - gro, rx_& tx max_indicate_pkts, exec_mode, rx & tx
          pause_enable, tx_steering_type and intr_type.
        - Added Device ID definition in vxge-main.h instead of
          include/linux/pci_ids.h file - Reported by David Miller
 - Incorporated following review comments from Ben Hutchings
        - NAPI is always enabled (no option to turn it OFF).
        - Loadable parameters
         rx_steering_type: This loadable option is removed.
         ring_blocks: This loadable option is removed.
         The driver default settings work well in most if not all cases.
         Another patch to configure these parameters with ethtool will be
         released in the future.
 - LRO has been deprecated in favour of GRO - Bill Fink & Dave Miller's comment
 - Fixed sparse warnings - Reported by Andi Kleen
 - Removed unused variables
Signed-off-by: NSivakumar Subramani <sivakumar.subramani@neterion.com>
Signed-off-by: NRastapur Santosh <santosh.rastapur@neterion.com>
Signed-off-by: NRamkrishna Vepa <ram.vepa@neterion.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This patch takes care of trafic handling related APIS.
- Interrupt Enable and disable
- Mask / Unmask Interrupt
- Traffic Interrupt handling.
- Alarm Interrupt handling.

- Changes in this submission -
        - General clean up - removed redundant includes, defines and macros.

- Changes in previous submissions -
 - General cleanup - removed unused functions and variables.
 - Use asserts where necessary - Reported by Andi Kleen
 - Fixed sparse warnings - Reported by Andi Kleen
 - Use a prefix, "__vxge" in front of hw functions to make them globally
   unique - Ben Hutchings
Signed-off-by: NSivakumar Subramani <sivakumar.subramani@neterion.com>
Signed-off-by: NRastapur Santosh <santosh.rastapur@neterion.com>
Signed-off-by: NRamkrishna Vepa <ram.vepa@neterion.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This patch takes care of Initialization and configuration steps of
Neterion Inc's X3100 Series 10GbE PCIe I/O Virtualized Server Adapter.
- Device Initialization.
- Verification and setting of device config parameters.
- Allocation of Tx FIFO and Rx Ring descriptors (DTR).
- APIs to get various type of hw stats
- APIs to configure RTS (Receive Traffic Steering)

- Changes in this submission -
        - Include vmalloc header without which a compilation error occured
          on sparc64, ppc64 and IA64 plaforms.
	- Fixed compilation warning in register_poll, write32_upper,
          write32_lower and the special write64 functions on ppc64.
        - General cleanup - removed redundant includes and defines.

- Changes in previous submissions -
        - Add readq/writeq implementation for the driver for 32 bit systems -
          reported by Dave Miller.
- Incorporated following comments from Ben Hutchings
        - Start a comment with "/**" to make it a kernel-doc comment.
        - Use prefix, "__vxge" in front of hw functions to make them globally
          unique.
        - Fixed unnecessary clearing members of *channel just before freeing
        - Use backslashes only for macro definitions and not in multi-line
          statements.
        - Used pci_find_capability instead of redefining it.
        - Used device and revision ids that are already in pdev - no need to
          read them again.
        - Used pci_save_state() and pci_restore_state() around resets.
        - Used udelay and mdelay directly instead of wrapper.
        - In __vxge_hw_device_register_poll() reset i to 0 after the
          microsecond delay loop to commence the millisecond delay loop.
        - Corrected spelling "sapper" - should be "swapper"
        - Remove too much vertical whitespace.
        - Replaced magic numbers with appropriate macros
- Incorporated following comments from Andi Kleen [andi@firstfloor.org]
        - Reduced the arguments in functions or refactored them into smaller
        functions.
        - Allocate page sized memories used in slow path with vmalloc.
        - Use asserts where necessary.
        - Use macros instead of magic numbers.
        - Use the pci layer code instead of defining own functions
        - Remove driver wrappers such as xge_hw_device_private_set().
        - Fixed sparse warnings.
Signed-off-by: NSivakumar Subramani <sivakumar.subramani@neterion.com>
Signed-off-by: NRastapur Santosh <santosh.rastapur@neterion.com>
Signed-off-by: NRamkrishna Vepa <ram.vepa@neterion.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

- Complete Register map details of Neterion Inc's X3100 Series 10GbE PCIe I/O
  Virtualized Server Adapter.

- No change from previous submission.

- Changes in previous submissions -
- Incorporated following comments from Ben Hutchings
        - Use original macros for endian checks
        - Remove VXGE_OS_PLATFORM_* macros as they are unused.
        - Converted multiple bVALX macros into single with additional
          width parameter and renamed it to vxge_bVALn.
        - Using __packed instead of pragma pack(1)
        - Added a comment of the use of a hw swapper so driver code is
          portable (does not have to change the byte order for register
          access as well as dma operations) on different ENDIAN platforms.
        - Using the <linux/pci_regs.h> definitions instead of redefing them.
        - Using the PCI capabilities registers in <linux/pci_regs.h>
          instead of redefing them.
Signed-off-by: NSivakumar Subramani <sivakumar.subramani@neterion.com>
Signed-off-by: NRastapur Santosh <santosh.rastapur@neterion.com>
Signed-off-by: NRamkrishna Vepa <ram.vepa@neterion.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>