- 20 1月, 2009 3 次提交
-
-
由 Ian Molton 提交于
This patch takes fixes a number of bugs in the caching code used by several ASoC codec drivers. Mostly off-by-one fixes. Signed-off-by: NIan Molton <ian@mnementh.co.uk> Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
由 Ian Molton 提交于
This patch provides suupport for the wm9705 AC97 codec on the Toshiba e740. Note: The e740 has a hard headphone switch that turns the speaker off and is not software detectable or controlable. Also both headphone and speaker amps share a common output enable. Signed-off-by: NIan Molton <ian@mnementh.co.uk> Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
由 Mark Brown 提交于
The Zylonite supports switching the MCLK for the WM9713 between the AC97CLK and CLK_POUT outputs of the PXA processor via switch SW15 on the board. This patch adds support for configuring the system to use CLK_POUT. Unfortunately it is not possible to read the state of SW15 from software so this feature is controlled by a module option 'clk_pout' which should be set to a non-zero value to enable the use of CLK_POUT. Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
- 17 1月, 2009 5 次提交
-
-
由 Mark Brown 提交于
The WM9713 driver does not support configuring the PLL output frequency so the output frequency parameter is irrelevant. Allow users to set it to zero by ignoring it. Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
由 Ian Molton 提交于
This patch adds support for the wm9712 ac97 codec as used in the Toshiba e800 PDA. It includes support for powering up / down the external headphone and speaker amplifiers on this machine. Signed-off-by: NIan Molton <ian@mnementh.co.uk> Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
由 Ian Molton 提交于
This patch adds support for the wm9705 ac97 codec as used in the Toshiba e750 PDA. It includes support for powering up / down the external headphone and speaker amplifiers on this machine. Signed-off-by: NIan Molton <ian@mnementh.co.uk> Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
由 Ian Molton 提交于
This driver adds support for the wm9705 ac97 codec. The driver supports audio input and output. Signed-off-by: NIan Molton <ian@mnementh.co.uk> Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
由 Ben Nizette 提交于
<mach/hardware.h> doesn't exist on AVR32 and therefore this driver won't build on that arch. AFAICT this driver doesn't actually use the content of that header so easiest just to remove it. Signed-off-by: NBen Nizette <bn@niasdigital.com> Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
- 16 1月, 2009 1 次提交
-
-
由 Hugo Villeneuve 提交于
Remove dependency on sffsdr_fpga_set_codec_fs() when the SFFSDR FPGA module is not selected. Signed-off-by: NHugo Villeneuve <hugo@hugovil.com> Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
- 15 1月, 2009 1 次提交
-
-
由 Peter Ujfalusi 提交于
Modify the check for the mux type to also handle the snd_soc_dapm_value_mux type in a same way as the snd_soc_dapm_mux. Signed-off-by: NPeter Ujfalusi <peter.ujfalusi@nokia.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 13 1月, 2009 1 次提交
-
-
由 Geert Uytterhoeven 提交于
warning: ignoring return value of 'request_irq', declared with attribute warn_unused_result Signed-off-by: NGeert Uytterhoeven <geert@linux-m68k.org>
-
- 12 1月, 2009 2 次提交
-
-
由 Takashi Iwai 提交于
snd-hda-intel driver used schedule_work() fot the delayed DMA pointer updates, but this has several potential problems: - it may block other eventsd works longer - it may deadlock when probing fails and flush_scheduled_work() is called during probe callback (as probe callback itself could be invoked from eventd) This patch adds an own workq for each driver instance to solve these problems. Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Wu Fengguang 提交于
The Intel DX58SO board works fine with model ALC883_3ST_6ch_INTEL. Signed-off-by: NWu Fengguang <fengguang.wu@intel.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 09 1月, 2009 8 次提交
-
-
由 Peter Ujfalusi 提交于
Call the snd_soc_free_pcm and snd_soc_dapm_free when the codec driver is unloaded. Signed-off-by: NPeter Ujfalusi <peter.ujfalusi@nokia.com> Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
由 Ian Molton 提交于
Many codec drivers were implementing cookie-cutter copies of the function that adds kcontrols to the codec. This patch moves this code to a common function snd_soc_add_controls() in soc-core.c and updates all drivers using copies of this function to use the new common version. [Edited to raise priority of error log message and document parameters. -- broonie] Signed-off-by: NIan Molton <ian@mnementh.co.uk> Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
由 Mark Brown 提交于
Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
由 Mark Brown 提交于
This patch adds a jack reporting interface to ASoC. This wraps the ALSA core jack detection functionality and provides integration with DAPM to automatically update the power state of pins based on the jack state. Since embedded platforms can have multiple detecton methods used for a single jack (eg, separate microphone and headphone detection) the report function allows specification of which bits are being updated on a given report. The expected usage is that machine drivers will create jack objects and then configure jack detection methods to update that jack. Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
由 Mark Brown 提交于
Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
由 Wu Fengguang 提交于
Fix the following lockdep warning by not reusing the hda_codec.spdif_mutex. ALSA sound/pci/hda/hda_codec.c:882: hda_codec_cleanup_stream: NID=0x2 ======================================================= [ INFO: possible circular locking dependency detected ] 2.6.28-next-20090102 #33 ------------------------------------------------------- mplayer/3151 is trying to acquire lock: (&pcm->open_mutex){--..}, at: [<ffffffffa004ced3>] snd_pcm_release+0x43/0xd0 [snd_pcm] but task is already holding lock: (&mm->mmap_sem){----}, at: [<ffffffff810c0252>] sys_munmap+0x42/0x80 which lock already depends on the new lock. Signed-off-by: NWu Fengguang <fengguang.wu@intel.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Takashi Iwai 提交于
Increase the version number in module info to indicate the fixes. Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Fernando Carrijo 提交于
Cc: Ingo Molnar <mingo@elte.hu> Cc: Thomas Gleixner <tglx@linutronix.de> Acked-by: NTheodore Ts'o <tytso@mit.edu> Acked-by: NMark Fasheh <mfasheh@suse.com> Acked-by: NDavid S. Miller <davem@davemloft.net> Cc: James Morris <jmorris@namei.org> Acked-by: NCasey Schaufler <casey@schaufler-ca.com> Acked-by: NTakashi Iwai <tiwai@suse.de> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 08 1月, 2009 6 次提交
-
-
由 Takashi Iwai 提交于
Added a quirk, model=dell, for Dell Inspiron Mini9 with ALC268 codec. Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Takashi Iwai 提交于
The snd-usb-caiaq driver causes Oops occasionally when accessing MIDI devices. This patch fixes the Oops and invalid URB submission errors as well. Cc: stable@kernel.org Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Peter Ujfalusi 提交于
The soc_value_enum has been merged to soc_enum. Signed-off-by: NPeter Ujfalusi <peter.ujfalusi@nokia.com> Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
由 Peter Ujfalusi 提交于
Merge the recently introduced soc_value_enum structure to the soc_enum. The value based enums are still handled separately from the normal enum types, but with the merge some of the newly introduced functions can be removed. Signed-off-by: NPeter Ujfalusi <peter.ujfalusi@nokia.com> Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
由 Lukasz Wojnilowicz 提交于
This is a patch which adds correct auto detection of model for snd-hda-intel for Acer Aspire 5930G and 6930G. Tested on my 5930G. It finally adds hp jack sense and 5.1 speaker system sliders. Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Ian Molton 提交于
This patch allows you to define the mixer paths as having the same name as the paths they represent. This is required to support codecs such as the wm9705 neatly without extra controls in the alsa mixer. Signed-off-by: NIan Molton <ian@mnementh.co.uk>
-
- 07 1月, 2009 5 次提交
-
-
由 Brian Hinz 提交于
Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Clemens Fruhwirth 提交于
Fixed typos of codec-id checks for AD1882/AD1882A. Cc: stable@kernel.org Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Takashi Iwai 提交于
Added a quirk for HP 2230s, model=laptop, with AD1984A codec. Reference: Novell bnc#461660 https://bugzilla.novell.com/show_bug.cgi?id=461660Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Laurent Pinchart 提交于
Several subsystem open handlers dereference the fops_get() return value without checking it for nullness. This opens a race condition between the open handler and module unloading. A module can be marked as being unloaded (MODULE_STATE_GOING) before its exit function is called and gets the chance to unregister the driver. During that window open handlers can still be called, and fops_get() will fail in try_module_get() and return a NULL pointer. This change checks the fops_get() return value and returns -ENODEV if NULL. Reported-by: NAlan Jenkins <alan-jenkins@tuffmail.co.uk> Signed-off-by: NLaurent Pinchart <laurent.pinchart@skynet.be> Acked-by: NTakashi Iwai <tiwai@suse.de> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Dave Airlie <airlied@linux.ie> Acked-by: NMauro Carvalho Chehab <mchehab@infradead.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Sam Ravnborg 提交于
Fix warnings caused by the unsigned long long usage in sparc specific drivers. The drivers were considered sparc specific more or less from the filename alone. Signed-off-by: NSam Ravnborg <sam@ravnborg.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 06 1月, 2009 8 次提交
-
-
由 Mark Brown 提交于
For codecs that have both SPI and I2C support we need to ensure that we don't try to make the codec driver built in when I2C is modular since that won't link. Do this by creating a helper variable which uses conditional defaults to pick up the correct value for all combinations. We don't need to do anything special for I2C-only codecs since a conditional select passes on the full value for a tristate. Reported-by: NIngo Molnar <mingo@elte.hu> Tested-by: NIngo Molnar <mingo@elte.hu> Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
由 Frederik Schwarzer 提交于
It is always "an" if there is a vowel _spoken_ (not written). So it is: "an hour" (spoken vowel) but "a uniform" (spoken 'j') Signed-off-by: NFrederik Schwarzer <schwarzerf@gmail.com> Signed-off-by: NJiri Kosina <jkosina@suse.cz>
-
由 Frederik Schwarzer 提交于
- (better, more, bigger ...) then -> (...) than Signed-off-by: NFrederik Schwarzer <schwarzerf@gmail.com> Signed-off-by: NJiri Kosina <jkosina@suse.cz>
-
由 Mark Brown 提交于
Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
由 Peter Ujfalusi 提交于
Convert the bitfield coded enums to the new VALUE_ENUM type. Remove the enum check, since the VALUE_ENUM type can handle the bitfield coding and also handles the 'holes' in the bitfield. Signed-off-by: NPeter Ujfalusi <peter.ujfalusi@nokia.com> Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
由 Peter Ujfalusi 提交于
This patch introduces a new enum type. In this enum type each enumerated items referred with a value. This new enum type can handle enums encoded in bitfield, or any other weird ways. twl4030 codec has several mux selection register, where the input/output mux is coded in a bitfield. With the normal enum type this type of mux can not be handled in a clean way. Signed-off-by: NPeter Ujfalusi <peter.ujfalusi@nokia.com> Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
由 Dmitry Baryshkov 提交于
If AC97 unit is in partially enabled state, early request_irq can trigger IRQ storm or even full hang up. Workaround this by forcibly switching ACLINK off at the start of the probe. Signed-off-by: NDmitry Baryshkov <dbaryshkov@gmail.com> Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
由 David Brownell 提交于
Let's have audio playback not sound like chipmunks, 'k? :) ASP1 on the DM355 EVM uses a 27 MHz external audio clock, not the slower clock used with ASP0 on the DM6446 EVM. Also, that slower ASP0 clock on the DM6446 is 12.288 MHz, not 22.5792 MHz ... 48 KHz sample rate (x256), not a double speed 44.1 KHz sample rate (which could be done, but isn't what the board init code now sets up). Signed-off-by: NDavid Brownell <dbrownell@users.sourceforge.net> Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-