CONFIG_HOTPLUG is going away as an option so __devexit_p is no longer
needed.
Signed-off-by: NBill Pemberton <wfp5p@virginia.edu>
Cc: Jiri Slaby <jirislaby@gmail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Nothing outside of drivers/tty/tty_io.c references these functions, so
mark them static.
Signed-off-by: NJosh Triplett <josh@joshtriplett.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

C files should include the header files that prototype their functions.
This keeps the types in sync, and eliminates warnings from GCC
(-Wmissing-prototypes) and Sparse (-Wdecl).
Signed-off-by: NJosh Triplett <josh@joshtriplett.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Currently, the port may be destroyed twice or destroyed without being
initialized. Fix this by sticking the destroy call in the right place
as suggested by Tilman.
Signed-off-by: NJiri Slaby <jslaby@suse.cz>
Reported-by: NTilman Schmidt <tilman@imap.cc>
Cc: Hansjoerg Lipp <hjlipp@web.de>
Cc: gigaset307x-common@lists.sourceforge.net
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Correct spelling typo in staging/dgrp driver
Signed-off-by: NMasanari Iida <standby24x7@gmail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Fix rapidio kernel-doc warnings:

  Warning(drivers/rapidio/rio.c:415): No description found for parameter 'local'
  Warning(drivers/rapidio/rio.c:415): Excess function parameter 'lstart' description in 'rio_map_inb_region'
  Warning(include/linux/rio.h:290): No description found for parameter 'switches'
  Warning(include/linux/rio.h:290): No description found for parameter 'destid_table'
Signed-off-by: NRandy Dunlap <rdunlap@infradead.org>
Cc: Matt Porter <mporter@kernel.crashing.org>
Acked-by: NAlexandre Bounine <alexandre.bounine@idt.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

I ported the driver supplied by SystemBase to mainline.

As the driver had MODULE_LICENSE("GPL") it is declared as a GPL module
and thus I have the right to distribute it upstream. Note, I did the
bare minimum to get it working. It still needs a lot of loving.

Cc: hjchoi <hjchoi@sysbas.com>
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Only we meet the following conditions, we can enable the DMA support for
auart:

  (1) We enable the DMA support in the dts file, such as
      arch/arm/boot/dts/imx28.dtsi.

  (2) We enable the hardware flow control.

  (3) We use the mx28, not the mx23. Due to hardware bug(see errata: 2836),
      we can not add the DMA support to mx23.
Signed-off-by: NHuang Shijie <b32955@freescale.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

The current mxs-auart driver is used for both mx23 and mx28.

But in mx23, the DMA has a bug(see errata:2836). We can not add the
DMA support in mx23, but we can add DMA support to auart in mx28.

So in order to add the DMA support for the auart in mx28, we should
distinguish the distinguish SOCs.

This patch adds a new platform_device_id table and a inline function
is_imx28_auart() to distinguish the mx23 and mx28.
Signed-off-by: NHuang Shijie <b32955@freescale.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Allows overriding default methods serial_in/serial_out.

In such platform specific replacement it is possible to use
other regshift, biased register offset, any other manipulation
that is not covered with common default methods.

Overriding default methods may be useful for platforms which got
serial peripheral with registers represented in big endian.
In this situation and assuming that 32 bit operations / alignment
is required then it may be useful to swab words before/after
accessing the serial registers.
Signed-off-by: NNoam Camus <noamc@ezchip.com>
Acked-by: NAlan Cox <alan@linux.intel.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

This patch simply makes the tilegx net driver call request_irq with a
non-null name. It makes the output in /proc/interrupts more obvious, but
also helps tools that don't expect to find null there.
Signed-off-by: NSimon Marchi <simon.marchi@polymtl.ca>
Acked-by: NChris Metcalf <cmetcalf@tilera.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

In the previous commit, console write function (serial_console_write)
is changed to disable SCI interrupts while printing console strings.
This introduces possible race cases in the serial startup / shutdown
functions on SMP systems.

This patch fixes the sh-sci in the same way as commit 9ec1882d
(tty: serial: imx: console write routing is unsafe on SMP, from
Xinyu Chen <xinyu.chen@freescale.com>, 2012-08-27) did.

There could be several consumers of the console,
* the kernel printk
* the init process using /dev/kmsg to call printk to show log
* shell, which opens /dev/console and writes with sys_write()

The shell goes into the normal UART open() and write() system calls,
while the other two go into the console operations.  The open() call
invokes serial startup function (sci_startup), which will write to
the SCSCR register (to enable or disable SCI interrupts) without any
locking.  This will conflict with the console serial function.

Add spinlock protections in sci_startup() and sci_shutdown() properly.
Signed-off-by: NShinya Kuribayashi <shinya.kuribayashi.px@renesas.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Symptom:

When entering the suspend with Android logcat running, printk() call
gets stuck and never returns.  The issue can be observed at printk()s
on nonboot CPUs when going to offline with their interrupts disabled,
and never seen at boot CPU (core0 in our case).

Details:

serial_console_write() lacks of appropriate spinlock handling.

In SMP systems, as long as sci_transmit_chars() is being processed
at one CPU core, serial_console_write() can stuck at the other CPU
core(s), when it tries to access to the same serial port _without_
a proper locking.  serial_console_write() waits for the transmit FIFO
getting empty, while sci_transmit_chars() writes data to the FIFO.

In general, peripheral interrupts are routed to boot CPU (core0) by
Linux ARM standard affinity settings.  SCI(F) interrupts are handled
by core0, so sci_transmit_chars() is processed on core0 as well.

When logcat is running, it writes enormous log data to the kernel at
every moment, forever.  So core0 can repeatedly continue to process
sci_transmit_chars() in its interrupt handler, which eventually makes
the other CPU core(s) stuck at serial_console_write().

Looking at serial/8250.c, this is a known console write lockup issue
with SMP kernels.  Fix the sh-sci driver in the same way 8250.c does.
Signed-off-by: NShinya Kuribayashi <shinya.kuribayashi.px@renesas.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

About FIFO count, there are two variants of SCIFs which show
a) TX count in upper, RX count in lower byte of FDR register
b) TX count in TFDR register, RX count in RFDR register

Common SCIFB regmap in current source code is defined as "a".
At least 7372 and 73a0 HW manual say their SICFB are "b".

This patch alters the definition to "b", considering the current
one has come from a mistake. The reason is as follows.

The flag SCIFB sh-sci driver means it has 256 byte FIFO.
The count is from 0(empty) to 256(full), that makes 9-bit.
Because FDR is 16-bit register, it can not hold two 9-bits.
That's why, SCIFB can not be "a".
Signed-off-by: NTakashi Yoshii <takashi.yoshii.zj@renesas.com>
Signed-off-by: NShinya Kuribayashi <shinya.kuribayashi.px@renesas.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Current mask 0xff to SCTFDR/RFDR damages SCIFB, because the
registers on SCIFB have 9-bit data (0 to 256).

This patch changes the mask according to port->fifosize.
Though I'm not sure if the mask is really needed (I don't know if
there are variants which have non-zero upper bits), it is safer.
Signed-off-by: NTakashi Yoshii <takashi.yoshii.zj@renesas.com>
Signed-off-by: NShinya Kuribayashi <shinya.kuribayashi.px@renesas.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Support prescaler 1/16 and 1/64, in addition to current 1 and 1/4.

Supporting below 2400bps was dropped long time ago in mainline.
Since then, setting lower rate has been resulting in erroneous
register value, without indicating any errors through API.

This patch adds more prescaler to support lower rates again.
This still doesn't check range, but we won't hit the case because
even 50bps at 48MHz clock is now supported.
Signed-off-by: NTakashi Yoshii <takashi.yoshii.zj@renesas.com>
Signed-off-by: NShinya Kuribayashi <shinya.kuribayashi.px@renesas.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

SCBRR == 0 is valid value (divide by 1).
Signed-off-by: NTakashi Yoshii <takashi.yoshii.zj@renesas.com>
Signed-off-by: NShinya Kuribayashi <shinya.kuribayashi.px@renesas.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

The commit 1ba76220 (serial: sh-sci: console Runtime PM support,
from Magnus Damm <damm@opensource.se>, 2011-08-03), tried to support
console runtime PM, but unfortunately it didn't work for us for some
reason.  We did not investigated further at that time, instead would
like to propose a different approach.

In Linux tty/serial world, to get console PM work properly, a serial
client driver does not have to maintain .runtime_suspend()/..resume()
calls itself, but can leave console power power management handling to
the serial core driver.

This patch moves the sh-sci driver in that direction.

Notes:

* There is room to optimize console runtime PM more aggressively by
  maintaining additional local runtime PM calls, but as a first step
  having .pm() operation would suffice.

* We still have a couple of direct calls to sci_port_enable/..disable
  left in the driver.  We have to live with them, because they're out
  of serial core's help.
Signed-off-by: NTeppei Kamijou <teppei.kamijou.yb@renesas.com>
Signed-off-by: NShinya Kuribayashi <shinya.kuribayashi.px@renesas.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

This partially reverts commit 1ba76220 (serial: sh-sci: console
Runtime PM support, from Magnus Damm <damm@opensource.se>, 2011-08-03).

The generic 'serial_core' can take care of console PM maintenance,
so all (or at least the first thing) we have to do to get console PM
work properly, is to implement uart_ops ->pm() operation in the sh-sci
serial client driver.

This patch partially reverts the commit above, but leaving sci_reset()
change in place, because sci_reset() is already part of another commit
(73c3d53f serial: sh-sci: Avoid FIFO clear for MCE toggle.).

A revised version of console PM support follows next.
Signed-off-by: NShinya Kuribayashi <shinya.kuribayashi.px@renesas.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

This reverts commit 5a50a01b (sh-sci / PM: Use power.irq_safe, from
Rafael J. Wysocki <rjw@sisk.pl>, 2011-08-24).

In order to get console PM work properly, we should implement uart_ops
->pm() operation, rather than sprinkle band-ading runtime PM calls in
the driver.
Signed-off-by: NShinya Kuribayashi <shinya.kuribayashi.px@renesas.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

This reverts commit 048be431 (sh-sci / PM: Avoid deadlocking runtime
PM, from Rafael J. Wysocki <rjw@sisk.pl>, 2012-03-09).

In order to get console PM work properly, we should implement uart_ops
->pm() operation, rather than sprinkle band-ading runtime PM calls in
the driver.
Signed-off-by: NShinya Kuribayashi <shinya.kuribayashi.px@renesas.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

After commit "TTY: move tty buffers to tty_port", the tty buffers are
not freed in some drivers. This is because tty_port_destructor is not
called whenever a tty_port is freed. This was an assumption I counted
with but was unfortunately untrue. So fix the drivers to fulfil this
assumption.

To be sure, the TTY buffers (and later some stuff) are gone along with
the tty_port, we have to call tty_port_destroy at tear-down places.
This is mostly where the structure containing a tty_port is freed.
This patch does exactly that -- put tty_port_destroy at those places.
Signed-off-by: NJiri Slaby <jslaby@suse.cz>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

After commit "TTY: move tty buffers to tty_port", the tty buffers are
not freed in some drivers. This is because tty_port_destructor is not
called whenever a tty_port is freed. This was an assumption I counted
with but was unfortunately untrue. So fix the drivers to fulfil this
assumption.

This one is special as we need more work to be done. Previously,
the tty_port was initialized at module load time, but to be able to
destroy the port and init it again, we now do the initialization in
probe and destroy in remove. I.e. at more appropriate places for that.
Signed-off-by: NJiri Slaby <jslaby@suse.cz>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

After commit "TTY: move tty buffers to tty_port", the tty buffers are
not freed in some drivers. This is because tty_port_destructor is not
called whenever a tty_port is freed. This was an assumption I counted
with but was unfortunately untrue.

Those using refcounting are safe now, but for those which do not we
introduce a function to be called right before the tty_port is freed
by the drivers.
Signed-off-by: NJiri Slaby <jslaby@suse.cz>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

After commit "TTY: move tty buffers to tty_port", the tty buffers are
not freed in some drivers. This is because tty_port_destructor is not
called whenever a tty_port is freed. This was an assumption I counted
with but was unfortunately untrue. So fix the drivers to fulfil this
assumption.

Here it is enough to switch to refcounting in tty_port.
Signed-off-by: NJiri Slaby <jslaby@suse.cz>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

After commit "TTY: move tty buffers to tty_port", the tty buffers are
not freed in some drivers. This is because tty_port_destructor is not
called whenever a tty_port is freed. This was an assumption I counted
with but was unfortunately untrue. So fix the drivers to fulfil this
assumption.

Here it is enough to switch to refcounting in tty_port.
Signed-off-by: NJiri Slaby <jslaby@suse.cz>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

tty from struct sdio_uart_port is unused. Proper refcounted tty in
tty_port->tty is used instead. So remove the member from that
structure.
Signed-off-by: NJiri Slaby <jslaby@suse.cz>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

After commit "TTY: move tty buffers to tty_port", the tty buffers are
not freed in some drivers. This is because tty_port_destructor is not
called whenever a tty_port is freed. This was an assumption I counted
with but was unfortunately untrue. So fix the drivers to fulfil this
assumption.

Here it is enough to switch to refcounting in tty_port.
Signed-off-by: NJiri Slaby <jslaby@suse.cz>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

After commit "TTY: move tty buffers to tty_port", the tty buffers are
not freed in some drivers. This is because tty_port_destructor is not
called whenever a tty_port is freed. This was an assumption I counted
with but was unfortunately untrue. So fix the drivers to fulfil this
assumption.

PTY is one of those, here we just need to use tty_port_put instead of
kfree. (Assuming tty_port_destructor does not need port->ops to be set
which we change here too.)
Signed-off-by: NJiri Slaby <jslaby@suse.cz>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Do not access unsafe port->tty pointer when we have a safe tty
already. Use the safe one.
Signed-off-by: NJiri Slaby <jslaby@suse.cz>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

The UART of the AR933x SoC implements a fractional divisor
for generating the desired baud rate.

The current code uses a fixed value for the fractional
part of the divisor, and this leads to improperly
calculated baud rates:

   baud    scale   step  real baud         diff
     300   5207*   8192     17756     17456   5818.66%
     600   2603*   8192     35511     34911   5818.50%
    1200   1301*   8192     71023     69823   5818.58%
    2400    650*   8192     11241      8841    368.37%
    4800    324*   8192     22645     17845    371.77%
    9600    161    8192      9645        45      0.46%
   14400    107    8192     14468        68      0.47%
   19200     80    8192     19290        90      0.46%
   28800     53    8192     28935       135      0.46%
   38400     39    8192     39063       663      1.72%
   57600     26    8192     57870       270      0.46%
  115200     12    8192    120192      4992      4.33%
  230400      5    8192    260417     30017     13.02%
  460800      2    8192    520833     60033     13.02%
  921600      0    8192   1562500    640900     69.93%

After the patch, the integer and fractional parts of the
divisor will be calculated dynamically. This ensures that
the UART will use correct baud rates:

   baud    scale   step  real baud         diff
     300      6      11       300         0      0.00%
     600     54     173       600         0      0.00%
    1200     30     195      1200         0      0.00%
    2400     30     390      2400         0      0.00%
    4800     48    1233      4800         0      0.00%
    9600     78    3976      9600         0      0.00%
   14400     98    7474     14400         0      0.00%
   19200     55    5637     19200         0      0.00%
   28800    130   19780     28800         0      0.00%
   38400     36    7449     38400         0      0.00%
   57600     78   23857     57600         0      0.00%
  115200     43   26575    115200         0      0.00%
  230400     23   28991    230400         0      0.00%
  460800     11   28991    460800         0      0.00%
  921600      5   28991    921599        -1      0.00%
Signed-off-by: NGabor Juhos <juhosg@openwrt.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

With hotpluggable and memoryless nodes, it's possible that node 0 will
not be online, so use the first online node's zonelist rather than
hardcoding node 0 to pass a zonelist with all zones to the oom killer.
Signed-off-by: NDavid Rientjes <rientjes@google.com>
Reviewed-by: NMichal Hocko <mhocko@suse.cz>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

This patch performs a small cleanup tty/Serial/Kconfig file by removing
unneeded ARCH dependencies. This dependencies already included in
board/type symbols.
Signed-off-by: NAlexander Shiyan <shc_work@mail.ru>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

This is following what 8250 driver is doing in console write function,
to avoid the hardware lockup case.

v2: incldudes the <linux/nmi.h>
Signed-off-by: NFeng Tang <feng.tang@intel.com>
Acked-by: NAlan Cox <alan@linux.intel.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Disabing dma irq and lock bottom half in smp kernel doesn't ensure exclusive
uart access. Call spin_lock_irqsave() instead.
Signed-off-by: NSteven Miao <realmz6@gmail.com>
Signed-off-by: NSonic Zhang <sonic.zhang@analog.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Without this we will shift data into oblivion and give wrong results on
some configurations
Signed-off-by: NAlan Cox <alan@linux.intel.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

The Zynq platform requires the use of CONFIG_OF.  Remove the #ifdef
conditionals in the uartps driver.  Make dependency explicit in Kconfig.
Signed-off-by: NJosh Cartwright <josh.cartwright@ni.com>
Tested-by: NMichal Simek <monstr@monstr.eu>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Resolves-bug: https://bugzilla.kernel.org/show_bug.cgi?id=49851Signed-off-by: NAlan Cox <alan@linux.intel.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

We should do hangup on dcd loss if CLOCAL is false not true.
Signed-off-by: NAlan Cox <alan@linux.intel.com>
Resolves-bug: https://bugzilla.kernel.org/show_bug.cgi?id=49911Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

This patch check whether the fifo lenth is empty before writing new data to fifo.If condition
is true,ifx_spi_write need to trigger one mrdy_assert. If condition is false,the mrdy_assert
will be trigger by the next ifx_spi_io.

Cc: Bi Chao <chao.bi@intel.com>
Signed-off-by: NChen Jun <jun.d.chen@intel.com>
Acked-by: NAlan Cox <alan@linux.intel.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>