This prevents trapping L2 I/O exits if L1 has neither unconditional nor
bitmap-based exiting enabled. Furthermore, it implements I/O bitmap
handling.
Reviewed-by: NGleb Natapov <gleb@redhat.com>
Signed-off-by: NJan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>

This reverts commit caf6900f.

It is causing migration failures, reference
https://bugzilla.kernel.org/show_bug.cgi?id=54061.
Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>

We already pass vmcs12 as argument.
Signed-off-by: NJan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: NGleb Natapov <gleb@redhat.com>

Reported-by: NPaolo Bonzini <pbonzini@redhat.com>
Suggested-by: NPaolo Bonzini <pbonzini@redhat.com>
Reviewed-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NGleb Natapov <gleb@redhat.com>

This field was needed to differentiate memory slots created by the new
API, KVM_SET_USER_MEMORY_REGION, from those by the old equivalent,
KVM_SET_MEMORY_REGION, whose support was dropped long before:

  commit b74a07be
  KVM: Remove kernel-allocated memory regions

Although we also have private memory slots to which KVM allocates
memory with vm_mmap(), !user_alloc slots in other words, the slot id
should be enough for differentiating them.

Note: corresponding function parameters will be removed later.
Reviewed-by: NMarcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: NTakuya Yoshikawa <yoshikawa_takuya_b1@lab.ntt.co.jp>
Signed-off-by: NGleb Natapov <gleb@redhat.com>

Without Posted Interrupt, current code is broken. Just disable by
default until Posted Interrupt is ready.
Signed-off-by: NYang Zhang <yang.z.zhang@Intel.com>
Signed-off-by: NGleb Natapov <gleb@redhat.com>

Use link_shadow_page to link the sp to the spte in __direct_map
Reviewed-by: NGleb Natapov <gleb@redhat.com>
Signed-off-by: NXiao Guangrong <xiaoguangrong@linux.vnet.ibm.com>
Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>

It is only used in debug code, so drop it
Reviewed-by: NGleb Natapov <gleb@redhat.com>
Signed-off-by: NXiao Guangrong <xiaoguangrong@linux.vnet.ibm.com>
Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>

Use min() to cleanup mapping_level
Reviewed-by: NGleb Natapov <gleb@redhat.com>
Signed-off-by: NXiao Guangrong <xiaoguangrong@linux.vnet.ibm.com>
Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>

Currently, kvm zaps the large spte if write-protected is needed, the later
read can fault on that spte. Actually, we can make the large spte readonly
instead of making them not present, the page fault caused by read access can
be avoided

The idea is from Avi:
| As I mentioned before, write-protecting a large spte is a good idea,
| since it moves some work from protect-time to fault-time, so it reduces
| jitter.  This removes the need for the return value.
Reviewed-by: NGleb Natapov <gleb@redhat.com>
Signed-off-by: NXiao Guangrong <xiaoguangrong@linux.vnet.ibm.com>
Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>

When calculating hw_cr0 teh current code masks bits that should be always
on and re-adds them back immediately after. Cleanup the code by masking
only those bits that should be dropped from hw_cr0. This allow us to
get rid of some defines.
Signed-off-by: NGleb Natapov <gleb@redhat.com>
Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>

SMEP is disabled if CPU is in non-paging mode in hardware.
However KVM always uses paging mode to emulate guest non-paging
mode with TDP. To emulate this behavior, SMEP needs to be manually
disabled when guest switches to non-paging mode.

We met an issue that, SMP Linux guest with recent kernel (enable
SMEP support, for example, 3.5.3) would crash with triple fault if
setting unrestricted_guest=0. This is because KVM uses an identity
mapping page table to emulate the non-paging mode, where the page
table is set with USER flag. If SMEP is still enabled in this case,
guest will meet unhandlable page fault and then crash.
Reviewed-by: NGleb Natapov <gleb@redhat.com>
Reviewed-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NDongxiao Xu <dongxiao.xu@intel.com>
Signed-off-by: NXiantao Zhang <xiantao.zhang@intel.com>
Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>

This reverts commit bd4c86ea.

There is not user for kvm_mmu_isolate_page() any more.
Signed-off-by: NGleb Natapov <gleb@redhat.com>
Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>

Gust page walker puts only present ptes into ptes[] array. No need to
check it again.
Signed-off-by: NGleb Natapov <gleb@redhat.com>
Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>

Signed-off-by: NGleb Natapov <gleb@redhat.com>
Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>

Move base_role.nxe initialisation to where all other roles are initialized.
Signed-off-by: NGleb Natapov <gleb@redhat.com>
Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>

Signed-off-by: NGleb Natapov <gleb@redhat.com>
Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>

spte_is_locklessly_modifiable() checks that both SPTE_HOST_WRITEABLE and
SPTE_MMU_WRITEABLE are present on spte. Make it more explicit.
Signed-off-by: NGleb Natapov <gleb@redhat.com>
Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>

Virtual interrupt delivery avoids KVM to inject vAPIC interrupts
manually, which is fully taken care of by the hardware. This needs
some special awareness into existing interrupr injection path:

- for pending interrupt, instead of direct injection, we may need
  update architecture specific indicators before resuming to guest.

- A pending interrupt, which is masked by ISR, should be also
  considered in above update action, since hardware will decide
  when to inject it at right time. Current has_interrupt and
  get_interrupt only returns a valid vector from injection p.o.v.
Reviewed-by: NMarcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: NKevin Tian <kevin.tian@intel.com>
Signed-off-by: NYang Zhang <yang.z.zhang@Intel.com>
Signed-off-by: NGleb Natapov <gleb@redhat.com>

basically to benefit from apicv, we need to enable virtualized x2apic mode.
Currently, we only enable it when guest is really using x2apic.

Also, clear MSR bitmap for corresponding x2apic MSRs when guest enabled x2apic:
0x800 - 0x8ff: no read intercept for apicv register virtualization,
               except APIC ID and TMCCT which need software's assistance to
               get right value.
Reviewed-by: NMarcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: NKevin Tian <kevin.tian@intel.com>
Signed-off-by: NYang Zhang <yang.z.zhang@Intel.com>
Signed-off-by: NGleb Natapov <gleb@redhat.com>

- APIC read doesn't cause VM-Exit
- APIC write becomes trap-like
Reviewed-by: NMarcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: NKevin Tian <kevin.tian@intel.com>
Signed-off-by: NYang Zhang <yang.z.zhang@intel.com>
Signed-off-by: NGleb Natapov <gleb@redhat.com>

'pushq' doesn't exist on i386.  Replace with 'push', which should work
since the operand is a register.
Signed-off-by: NAvi Kivity <avi.kivity@gmail.com>
Signed-off-by: NGleb Natapov <gleb@redhat.com>

If emulate_invalid_guest_state=false vmx->emulation_required is never
actually used, but it ends up to be always set to true since
handle_invalid_guest_state(), the only place it is reset back to
false, is never called. This, besides been not very clean, makes vmexit
and vmentry path to check emulate_invalid_guest_state needlessly.

The patch fixes that by keeping emulation_required coherent with
emulate_invalid_guest_state setting.
Signed-off-by: NGleb Natapov <gleb@redhat.com>
Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>

If VMX reports segment as unusable, zero descriptor passed by the emulator
before returning. Such descriptor will be considered not present by the
emulator.
Signed-off-by: NGleb Natapov <gleb@redhat.com>
Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>

The function deals with code segment too.
Signed-off-by: NGleb Natapov <gleb@redhat.com>
Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>

Usability is returned in unusable field, so not need to clobber entire
AR. Callers have to know how to deal with unusable segments already
since if emulate_invalid_guest_state=true AR is not zeroed.
Signed-off-by: NGleb Natapov <gleb@redhat.com>
Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>

vmx->rmode.vm86_active is never true is unrestricted guest is enabled.
Make it more explicit that neither enter_pmode() nor enter_rmode() is
called in this case.
Signed-off-by: NGleb Natapov <gleb@redhat.com>
Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>

There is no reason for it. If state is suitable for vmentry it
will be detected during guest entry and no emulation will happen.
Signed-off-by: NGleb Natapov <gleb@redhat.com>
Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>

Signed-off-by: NGleb Natapov <gleb@redhat.com>
Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>

Signed-off-by: NGleb Natapov <gleb@redhat.com>
Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>

Since vmx_get_cpl() always returns 0 when VCPU is in real mode it is no
longer needed. Also reset CPL cache to zero during transaction to
protected mode since transaction may happen while CS.selectors & 3 != 0,
but in reality CPL is 0.
Signed-off-by: NGleb Natapov <gleb@redhat.com>
Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>

Reviewed-by: NGleb Natapov <gleb@redhat.com>
Signed-off-by: NAvi Kivity <avi.kivity@gmail.com>
Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>

Make fastop opcodes usable in other emulations.
Reviewed-by: NGleb Natapov <gleb@redhat.com>
Signed-off-by: NAvi Kivity <avi.kivity@gmail.com>
Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>

Reviewed-by: NGleb Natapov <gleb@redhat.com>
Signed-off-by: NAvi Kivity <avi.kivity@gmail.com>
Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>

Reviewed-by: NGleb Natapov <gleb@redhat.com>
Signed-off-by: NAvi Kivity <avi.kivity@gmail.com>
Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>

Reviewed-by: NGleb Natapov <gleb@redhat.com>
Signed-off-by: NAvi Kivity <avi.kivity@gmail.com>
Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>

This is a bit of a special case since we don't have the usual
byte/word/long/quad switch; instead we switch on the condition code embedded
in the instruction.
Reviewed-by: NGleb Natapov <gleb@redhat.com>
Signed-off-by: NAvi Kivity <avi.kivity@gmail.com>
Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>

SHL, SHR, ROL, ROR, RCL, RCR, SAR, SAL
Reviewed-by: NGleb Natapov <gleb@redhat.com>
Signed-off-by: NAvi Kivity <avi.kivity@gmail.com>
Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>

Reviewed-by: NGleb Natapov <gleb@redhat.com>
Signed-off-by: NAvi Kivity <avi.kivity@gmail.com>
Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>

The current reexecute_instruction can not well detect the failed instruction
emulation. It allows guest to retry all the instructions except it accesses
on error pfn

For example, some cases are nested-write-protect - if the page we want to
write is used as PDE but it chains to itself. Under this case, we should
stop the emulation and report the case to userspace
Reviewed-by: NGleb Natapov <gleb@redhat.com>
Signed-off-by: NXiao Guangrong <xiaoguangrong@linux.vnet.ibm.com>
Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>