rpc_unlink() and rpc_rmdir() will dput the dentry reference for you.
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
(cherry picked from a05a57effa71a1f67ccbfc52335c10c8b85f3f6a commit)

A prior call to rpc_depopulate() by rpc_rmdir() on the parent directory may
have already called simple_unlink() on this entry.
Add the same check to rpc_rmdir(). Also remove a redundant call to
rpc_close_pipes() in rpc_rmdir.
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
(cherry picked from 0bbfb9d20f6437c4031aa3bf9b4d311a053e58e3 commit)

Make it take a dentry argument instead of a path
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
(cherry picked from 648d4116eb2509f010f7f34704a650150309b3e7 commit)

Signe-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
(cherry picked from 88bf6d811b01a4be7fd507d18bf5f1c527989089 commit)

I'm trying to speeding up mkdir(2) for network file systems.  A typical
mkdir(2) calls two inode_operations: lookup and mkdir.  The lookup
operation would fail with ENOENT in common case.  I think it is unnecessary
because the subsequent mkdir operation can check it.  In case of creat(2),
lookup operation is called with the LOOKUP_CREATE flag, so individual
filesystem can omit real lookup.  e.g.  nfs_lookup().

Here is a sample patch which uses LOOKUP_CREATE and O_EXCL on mkdir,
symlink and mknod.  This uses the gadget for creat(2).

And here is the result of a benchmark on NFSv3.
  mkdir(2) 10,000 times:
    original  50.5 sec
    patched   29.0 sec
Signed-off-by: NASANO Masahiro <masano@tnes.nec.co.jp>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
(cherry picked from fab7bf44449b29f9d5572a5dd8adcf7c91d5bf0f commit)

nfs_wb_page() waits on request completion and, as a result, is not safe to be
called from nfs_release_page() invoked by VM scanner as part of GFP_NOFS
allocation. Fix possible deadlock by analyzing gfp mask and refusing to
release page if __GFP_FS is not set.
Signed-off-by: NNikita Danilov <danilov@gmail.com>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
(cherry picked from 374d969debfb290bafcb41d28918dc6f7e43ce31 commit)

When the bridge recomputes features, it does not maintain the
constraint that SG/GSO must be off if TX checksum is off.
This patch adds that constraint.

On a completely unrelated note, I've also added TSO6 and TSO_ECN
feature bits if GSO is enabled on the underlying device through
the new NETIF_F_GSO_SOFTWARE macro.
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

table->private might change because of ruleset changes, don't use it without
holding the lock.
Signed-off-by: NPatrick McHardy <kaber@trash.net>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

ip_conntrack_put must not be called while holding ip_conntrack_lock
since destroy_conntrack takes it again.
Signed-off-by: NPatrick McHardy <kaber@trash.net>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Add 'linux,phandle' entry to i8259@4d0 node.
Signed-off-by: NZhang Wei <wei.zhang@freescale.com>
Signed-off-by: NJon Loeliger <jdl@freescale.com>
Signed-off-by: NPaul Mackerras <paulus@samba.org>

Also fix 80-column run-over.
Signed-off-by: NJon Loeliger <jdl@freescale.com>
Signed-off-by: NPaul Mackerras <paulus@samba.org>

As per list discussion, let's add device tree source files
under powerpc/boot/dts.  If nothing else, it is a starting point.
Signed-off-by: NJon Loeliger <jdl@freescale.com>
Signed-off-by: NPaul Mackerras <paulus@samba.org>

Also accept "local-mac-address".  However the old "address"
is now obsolete, but accepted for backwards compatibility.
It should be removed after all device trees have been
converted to use "mac-address".
Signed-off-by: NJon Loeliger <jdl@freescale.com>
Signed-off-by: NPaul Mackerras <paulus@samba.org>

Found in 2.4 by Yixin Pan <yxpan@hotmail.com>.

> When I read fib_semantics.c of Linux-2.4.32, write_lock(&fib_info_lock) =
> is used in fib_release_info() instead of write_lock_bh(&fib_info_lock).  =
> Is the following case possible: a BH interrupts fib_release_info() while =
> holding the write lock, and calls ip_check_fib_default() which calls =
> read_lock(&fib_info_lock), and spin forever.
Signed-off-by: NAlexey Kuznetsov <kuznet@ms2.inr.ac.ru>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This fixes source filter leakage when a device is removed and a
process leaves the group thereafter.

This also includes corresponding fixes for IPv6 multicast source
filters on device removal.
Signed-off-by: NDavid L Stevens <dlstevens@us.ibm.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

It causes way too much trouble and confusion in userspace.
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The PPP code contains two kmalloc()s followed by memset()s without
handling a possible memory allocation failure.  (Suggested by Joe
Perches).

And furthermore, conversions from kmalloc+memset to kzalloc.

[akpm@osdl.org: fix error-path leak]
[akpm@osdl.org: cleanups]
[paulus@samba.org: don't add useless printk and cardmap_destroy calls]
Signed-off-by: NPanagiotis Issaris <takis@issaris.org>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NPaul Mackerras <paulus@samba.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Signed-off-by: NRalf Hildebrandt <Ralf.Hildebrandt@charite.de>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

atm_proc_exit() is declared as __exit, and thus in .exit.text.  On
some architectures (ARM) .exit.text is discarded at compile time, and
since atm_proc_exit() is called by some other __init functions, it
results in a link error.
Signed-off-by: NKevin Hilman <khilman@mvista.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Convert dev_alloc_skb() to netdev_alloc_skb() and increase default
rx ring size to 255. The old ring size of 100 was too small.

Update version to 1.4.44.
Signed-off-by: NMichael Chan <mchan@broadcom.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Fix a subtle race condition between bnx2_start_xmit() and bnx2_tx_int()
similar to the one in tg3 discovered by Herbert Xu:

CPU0					CPU1
bnx2_start_xmit()
	if (tx_ring_full) {
		tx_lock
					bnx2_tx()
						if (!netif_queue_stopped)
		netif_stop_queue()
		if (!tx_ring_full)
						update_tx_ring
			netif_wake_queue()
		tx_unlock
	}

Even though tx_ring is updated before the if statement in bnx2_tx_int() in
program order, it can be re-ordered by the CPU as shown above.  This
scenario can cause the tx queue to be stopped forever if bnx2_tx_int() has
just freed up the entire tx_ring.  The possibility of this happening
should be very rare though.

The following changes are made, very much identical to the tg3 fix:

1. Add memory barrier to fix the above race condition.

2. Eliminate the private tx_lock altogether and rely solely on
netif_tx_lock.  This eliminates one spinlock in bnx2_start_xmit()
when the ring is full.

3. Because of 2, use netif_tx_lock in bnx2_tx_int() before calling
netif_wake_queue().

4. Add memory barrier to bnx2_tx_avail().

5. Add bp->tx_wake_thresh which is set to half the tx ring size.

6. Check for the full wake queue condition before getting
netif_tx_lock in tg3_tx().  This reduces the number of unnecessary
spinlocks when the tx ring is full in a steady-state condition.
Signed-off-by: NMichael Chan <mchan@broadcom.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

this minor patch fixes the description of net.ipv4.tcp_mem sysctl
in ip-sysctl.txt - the headline names the values "min, pressure, max",
while the description uses the "low, pressure, high" values.
Both tcp_rmem and tcp_wmem descriptions use the "min, pressure, max"
values, so I have changed the tcp_mem to match this and not vice versa.
Signed-off-by: NJan "Yenya" Kasprzak <kas@fi.muni.cz>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

There is a leak of a socket's multicast source filter list structure
on closing a socket with a multicast source filter set on an interface
that does not exist any more.
Signed-off-by: NMichal Ruzicka <michal.ruzicka@comstar.cz>
Acked-by: NDavid L Stevens <dlstevens@us.ibm.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Split off __icmpv6_socket's sk->sk_dst_lock class, because it gets
used from softirqs, which is safe for __icmpv6_sockets (because they
never get directly used via userspace syscalls), but unsafe for normal
sockets.

Has no effect on non-lockdep kernels.
Signed-off-by: NIngo Molnar <mingo@elte.hu>
Acked-by: NHerbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

It needs netfilter_bridge.h for brnf_deferred_hooks
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

On High end systems (1024 or so cpus) this can potentially cause stack
overflow.  Fix the stack usage.
Signed-off-by: NSuresh Siddha <suresh.b.siddha@intel.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Since __vlan_hwaccel_rx() is essentially bypassing the
netif_receive_skb() call that would have occurred if we did the VLAN
decapsulation in software, we are missing the skb_bond() call and the
assosciated checks it does.

Export those checks via an inline function, skb_bond_should_drop(),
and use this in __vlan_hwaccel_rx().
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Clear HID0[en_attn] at CPU init time on PPC970.  Closes CVE-2006-4093.
Signed-off-by: NOlof Johansson <olof@lixom.net>
Signed-off-by: NPaul Mackerras <paulus@samba.org>

The code for using the radix tree for reverse mapping of interrupts has
a typo that causes it to create incorrect mappings if the software and
hardware numbers happen to be different. This would, among others, cause
the IDE interrupt to fail on js20's. This fixes it.
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: NPaul Mackerras <paulus@samba.org>

- On archs that have no-exec support, we vmalloc() a executable scratch
area of PAGE_SIZE and divide it up into an array of slots of maximum
instruction size for that arch
- On a kprobe registration, the original instruction is copied to the
first available free slot, so if multiple kprobes are registered, chances
are, they get contiguous slots
- On POWER4, due to not having coherent icaches, we could hit a situation
where a probe that is registered on one processor, is hit immediately on
another. This second processor could have fetched the stream of text from
the out-of-line single-stepping area *before* the probe registration
completed, possibly due to an earlier (and a different) kprobe hit and
hence would see stale data at the slot.

Executing such an arbitrary instruction lead to a problem as reported
in LTC bugzilla 23555.

The correct solution is to call flush_icache_range() as soon as the
instruction is copied for out-of-line single-stepping, so the correct
instruction is seen on all processors.

Thanks to Will Schmidt who tracked this down.
Signed-off-by: NAnanth N Mavinakayanahalli <ananth@in.ibm.com>
Acked-by: NWill Schmidt <will_schmidt@vnet.ibm.com>
Signed-off-by: NPaul Mackerras <paulus@samba.org>

To compile kexec on 32-bit we need a few more bits and pieces. Rather
than add empty definitions, we can make crash.c work on 32-bit, with
only a couple of kludges.
Signed-off-by: NMichael Ellerman <michael@ellerman.id.au>
Signed-off-by: NPaul Mackerras <paulus@samba.org>

We're missing a few functions for kexec to compile on 32-bit. There's
nothing really 64-bit specific about the 64-bit versions, so make them
generic rather than adding empty definitions for 32-bit.
Signed-off-by: NMichael Ellerman <michael@ellerman.id.au>
Signed-off-by: NPaul Mackerras <paulus@samba.org>

Updating the defconfigs for iseries, pseries, and G5.   Sticking with
the defaults, with the following exceptions:  I've turned off HW_RANDOM
for all three configs.   For G5, I've enabled SND_AOA and friends as
modules; this includes the FABRIC_LAYOUT, ONYX, TAS, TOONIE and
SOUNDBUS* config options.
Signed-off-by: NWill Schmidt <will_schmidt@vnet.ibm.com>
Signed-off-by: NPaul Mackerras <paulus@samba.org>

In the case of a system hang, the user will invoke soft-reset to
initiate the kdump boot.  If xmon is enabled, the CPU(s) enter into the
xmon debugger.   Unfortunately, the secondary CPU(s) will return to the
hung state when they exit from the debugger (returned from die() ->
system_reset_exception()).  This causes a problem in kdump since the
hung CPU(s) will not respond to the IPI sent from kdump.  This patch
fixes the issue by calling crash_kexec_secondary() directly from
system_reset_exception() without returning to the previous state.  These
secondary CPUs wait 5ms until the kdump boot is started by the primary
CPU.   In the case we exited from the debugger to "recover" (command 'x'
in xmon) the primary and the secondary CPUs will all return from die()
-> system_reset_exception() ->crash_kexec_secondary() wait 5ms, then
return to the previous state.  A kdump boot is not started in this case.
Signed-off-by: NHaren Myneni <haren@us.ibm.com>
Signed-off-by: NDavid Wilder <dwilder@us.ibm.com>
Signed-off-by: NPaul Mackerras <paulus@samba.org>

Some architectures change $CC in arch/$(ARCH)/Makefile
mips is one example.

That have impact on what options are supported by gcc so move all
$(call cc-option, ...) after include of arch specific Makefile.
Signed-off-by: NSam Ravnborg <sam@ravnborg.org>

Don't waste DMA capable pages for identity mapping page tables.
Signed-off-by: NHeiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>