- 18 5月, 2010 5 次提交
-
-
由 Vladimir Ermakov 提交于
Adds new capture boards Hawell HW-404M7 and HW-808M7. Those cards have 4 or 8 SAA7130 chips and for the work it only needs initialize registers. The value of those registers were dumped under Windows using flytest. But board haven't EEPROM. For the first chip: SAA7130 (0x7130, SubVenID:1131, SubDevID:0000, Rev: 01) I2C slave devices found: No devices GPIO pins: Mode : 0x00389C00 Value: 0x00016C00 Video input: 3 Audio input: Analog Line1 For other chips: SAA7130 (0x7130, SubVenID:1131, SubDevID:0000, Rev: 01) I2C slave devices found: No devices GPIO pins: Mode : 0x00389200 Value: 0x00010000 Video input: 3 Audio input: Analog Line1 Signed-off-by: NVladimir Ermakov <vooon341@gmail.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Julia Lawall 提交于
In quickcam_messenger.c, if the NULL test on uvd is needed, then the dereference should be after the NULL test. In vpif_display.c, std_info is initialized to the address of a structure field. This seems unlikely to be NULL. Test std_info->stdid instead. In saa7134-alsa.c, the function is only called from one place, where the chip argument has already been dereferenced. On the other hand, if it should be kept, then card should be initialized after it. A simplified version of the semantic match that detects this problem is as follows (http://coccinelle.lip6.fr/): // <smpl> @match exists@ expression x, E; identifier fld; @@ * x->fld ... when != \(x = E\|&x\) * x == NULL // </smpl> Signed-off-by: NJulia Lawall <julia@diku.dk> Acked-by: NMuralidharan Karicheri <m-karicheri2@ti.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Jean Delvare 提交于
Some variants of the ASUS TV-FM 7135 are handled as the ASUSTeK P7131 Analog (card=146). However, by the time we find out, some card-specific initialization is missed. In particular, the fact that the IR is GPIO-based. Set it when we change the card type, and run saa7134_input_init1(). Signed-off-by: NJean Delvare <khali@linux-fr.org> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Mauro Carvalho Chehab 提交于
Now, both driver and keytable names are exported to userspace. This will help userspace to decide when a table need to be replaced by another one. Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Dmitri Belimov 提交于
Fix broken I2C IR for TV cards of Beholder. Signed-off-by: NBeholder Intl. Ltd. Dmitry Belimov <d.belimov@gmail.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
- 30 3月, 2010 1 次提交
-
-
由 Tejun Heo 提交于
include cleanup: Update gfp.h and slab.h includes to prepare for breaking implicit slab.h inclusion from percpu.h percpu.h is included by sched.h and module.h and thus ends up being included when building most .c files. percpu.h includes slab.h which in turn includes gfp.h making everything defined by the two files universally available and complicating inclusion dependencies. percpu.h -> slab.h dependency is about to be removed. Prepare for this change by updating users of gfp and slab facilities include those headers directly instead of assuming availability. As this conversion needs to touch large number of source files, the following script is used as the basis of conversion. http://userweb.kernel.org/~tj/misc/slabh-sweep.py The script does the followings. * Scan files for gfp and slab usages and update includes such that only the necessary includes are there. ie. if only gfp is used, gfp.h, if slab is used, slab.h. * When the script inserts a new include, it looks at the include blocks and try to put the new include such that its order conforms to its surrounding. It's put in the include block which contains core kernel includes, in the same order that the rest are ordered - alphabetical, Christmas tree, rev-Xmas-tree or at the end if there doesn't seem to be any matching order. * If the script can't find a place to put a new include (mostly because the file doesn't have fitting include block), it prints out an error message indicating which .h file needs to be added to the file. The conversion was done in the following steps. 1. The initial automatic conversion of all .c files updated slightly over 4000 files, deleting around 700 includes and adding ~480 gfp.h and ~3000 slab.h inclusions. The script emitted errors for ~400 files. 2. Each error was manually checked. Some didn't need the inclusion, some needed manual addition while adding it to implementation .h or embedding .c file was more appropriate for others. This step added inclusions to around 150 files. 3. The script was run again and the output was compared to the edits from #2 to make sure no file was left behind. 4. Several build tests were done and a couple of problems were fixed. e.g. lib/decompress_*.c used malloc/free() wrappers around slab APIs requiring slab.h to be added manually. 5. The script was run on all .h files but without automatically editing them as sprinkling gfp.h and slab.h inclusions around .h files could easily lead to inclusion dependency hell. Most gfp.h inclusion directives were ignored as stuff from gfp.h was usually wildly available and often used in preprocessor macros. Each slab.h inclusion directive was examined and added manually as necessary. 6. percpu.h was updated not to include slab.h. 7. Build test were done on the following configurations and failures were fixed. CONFIG_GCOV_KERNEL was turned off for all tests (as my distributed build env didn't work with gcov compiles) and a few more options had to be turned off depending on archs to make things build (like ipr on powerpc/64 which failed due to missing writeq). * x86 and x86_64 UP and SMP allmodconfig and a custom test config. * powerpc and powerpc64 SMP allmodconfig * sparc and sparc64 SMP allmodconfig * ia64 SMP allmodconfig * s390 SMP allmodconfig * alpha SMP allmodconfig * um on x86_64 SMP allmodconfig 8. percpu.h modifications were reverted so that it could be applied as a separate patch and serve as bisection point. Given the fact that I had only a couple of failures from tests on step 6, I'm fairly confident about the coverage of this conversion patch. If there is a breakage, it's likely to be something in one of the arch headers which should be easily discoverable easily on most builds of the specific arch. Signed-off-by: NTejun Heo <tj@kernel.org> Guess-its-ok-by: NChristoph Lameter <cl@linux-foundation.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
-
- 27 2月, 2010 5 次提交
-
-
由 Sean Young 提交于
When capturing NTSC, the saa7134 can capture 720x480. While doing Laserdisc captures using this card, I noticed that right side was truncated/cropped. The highest geometry the driver allows is 704x480, even though in Windows XP it is 720x480. This results in no cropping and the same results as in Windows. Tested on an AverMedia GO 007 FM Plus. Signed-off-by: NSean Young <sean@mess.org> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 JD Louw 提交于
This patch enables LNB power on newer revision d1 Compro S350 and S300 DVB-S cards. Signed-off-by: NJD Louw <jd.louw@mweb.co.za> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Dmitri Belimov 提交于
Add lost configuration for our TV card. Signed-off-by: NBeholder Intl. Ltd. Dmitry Belimov <d.belimov@gmail.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Mauro Carvalho Chehab 提交于
When preparing the linux-next patches, I got those errors: include/media/ir-core.h:29: warning: left shift count >= width of type In file included from include/media/ir-common.h:29, from drivers/media/video/ir-kbd-i2c.c:50: drivers/media/video/ir-kbd-i2c.c: In function ‘ir_probe’: drivers/media/video/ir-kbd-i2c.c:324: warning: left shift count >= width of type Unfortunately, enum is 32 bits on i386. As we define IR_TYPE_OTHER as 1<<63, it won't work on non 64 bits arch. Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Mauro Carvalho Chehab 提交于
Adds an structure to ir_input_register to contain IR device characteristics, like supported protocols and a callback to handle protocol event changes. Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
- 30 1月, 2010 1 次提交
-
-
由 Hans Verkuil 提交于
An earlier commit removed the lock_kernel/unlock_kernel pair but forgot to remove the unlock_kernel call in the cleanup path at the end of the function. Signed-off-by: NHans Verkuil <hverkuil@xs4all.nl> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
- 17 1月, 2010 1 次提交
-
-
由 Dmitri Belimov 提交于
Some customers has problem with quality of DVB-T https://bugs.launchpad.net/ubuntu/+source/linux/+bug/446575 After this patch http://patchwork.kernel.org/patch/23345/ This is patch for fix regression with DVB-T. Tested with many people. Signed-off-by: NAlexey Osipov <lion-simba@pridelands.ru> Signed-off-by: NBeholder Intl. Ltd. Dmitry Belimov <d.belimov@gmail.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
- 16 12月, 2009 8 次提交
-
-
由 Mauro Carvalho Chehab 提交于
We'll need to register a sysfs class for the IR devices. As such, the better is to have the input_register_device()/input_unregister_device() inside the ir register/unregister functions. Also, solves a naming problem with V4L ir_input_init() function, that were, in fact, registering a device. While here, do a few cleanups at budget-ci IR logic. Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Mauro Carvalho Chehab 提交于
Now, ir_input_free does more than just freeing the keytab. Better to rename it as ir_input_unregister. Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Lukas Karas 提交于
saa7134: Add support for IR reciever on card LifeView FlyDVB Trio -- To unsubscribe from this list: send the line "unsubscribe linux-media" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html [mchehab@redhat.com: CodingStyle fixes and ported upstream] Tested-by: NPetr Fiala <petr.fiala@gmail.com> Signed-off-by: NLukas Karas <lukas.karas@centrum.cz> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Laurent Pinchart 提交于
Now that the video_device registration is tested using video_is_registered(), drivers don't need to initialize the video_device::minor field to -1 anymore. Remove those unneeded assignments. [mchehab.redhat.com: removed tm6000 changes as tm6000 is not ready yet for submission even on staging] Signed-off-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Laurent Pinchart 提交于
Instead of using the minor number in kernel log messages, use the device node name as returned by the video_device_node_name() function. This makes debug, informational and error messages easier to understand for end users. [mchehab.redhat.com: removed tm6000 changes as tm6000 is not ready yet for submission even on staging] Signed-off-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Laurent Pinchart 提交于
Fix all device drivers to use the video_drvdata function instead of maintaining a local list of minor to private data mappings. Call video_set_drvdata to register the driver private pointer when not already done. Where applicable, the local list of mappings is completely removed when it becomes unused. [mchehab.redhat.com: removed tm6000 changes as tm6000 is not ready yet for submission even on staging] Signed-off-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Laurent Pinchart 提交于
Fix all device drivers to use the video_is_registered function instead of checking video_device::minor. Signed-off-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Laurent Pinchart 提交于
Fix all device drivers to use the new video_device_node_name function. This also strips kernel log messages from the "/dev/" prefix, has the device node location is a userspace policy decision unknown to the kernel. Signed-off-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
- 06 12月, 2009 15 次提交
-
-
由 Mauro Carvalho Chehab 提交于
Currently, the IR table is initialized by calling ir_input_init(). However, this function doesn't return any error code, nor has a function to be called when de-initializing the IR's. Change the return argment to integer and make sure that each driver will handle the error code. Also adds a function to free any resources that may be allocating there: ir_input_free(). Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Mauro Carvalho Chehab 提交于
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Peter Huewe 提交于
Trivial patch which adds the __init/__exit macros to the module_init/ module_exit functions of the following drivers in media video: drivers/media/video/ivtv/ivtv-driver.c drivers/media/video/cx18/cx18-driver.c drivers/media/video/davinci/dm355_ccdc.c drivers/media/video/davinci/dm644x_ccdc.c drivers/media/video/saa7164/saa7164-core.c drivers/media/video/saa7134/saa7134-core.c drivers/media/video/cx23885/cx23885-core.c Cc: Hermann Pitton <hermann-pitton@arcor.de> Acked-by: NSteven Toth <stoth@kernellabs.com> Signed-off-by: NPeter Huewe <peterhuewe@gmx.de> Acked-by: NAndy Walls <awalls@radix.net> Acked-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: NMuralidharan Karicheri <m-karicheri2@ti.com> Signed-off-by: NDouglas Schilling Landgraf <dougsland@redhat.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Michael Krufky 提交于
Signed-off-by: NMichael Krufky <mkrufky@kernellabs.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Michael Obst 提交于
Signed-off-by: NMichael Obst <mike.obst@gmail.com> Signed-off-by: NMichael Krufky <mkrufky@kernellabs.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Michael Krufky 提交于
As pointed out by Hermann Pitton, it turns out that the DTV1000S card's analog entry made it into the #if 0 flyvideo tweaks in saa7134-cards.c and is not valid there. This patch fixes the problem. Cc: hermann pitton <hermann-pitton@arcor.de> Signed-off-by: NMichael Krufky <mkrufky@kernellabs.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Laurent Pinchart 提交于
Upcoming I2C v4l2_subdev drivers need a way to control the subdevice power state from the core. This use case is already partially covered by the tuner s_standby operation, but no way to explicitly come back from the standby state is available. Rename the tuner s_standby operation to core s_power, and fix tuner drivers accordingly. The tuner core will call s_power(0) instead of s_standby(). No explicit call to s_power(1) is required for tuners as they are supposed to wake up from standby automatically. [mchehab@redhat.com: CodingStyle fix] Signed-off-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: NHans Verkuil <hverkuil@xs4all.nl> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Jean Delvare 提交于
Google is pretty clear that the HVR 1110 IR chip is always at address 0x71 and the BeholdTV IR chip is always at address 0x2d. This completes the list of IR device addresses for the SAA7134-based adapters, and we no longer need to probe any of them. Signed-off-by: NJean Delvare <khali@linux-fr.org> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Jean Delvare 提交于
The i2c core prevents us from probing I2C address 0x7a because it's not a valid 7-bit address (reserved for 10-bit addressing.) So we must stop probing this address, and explicitly list all adapters which use it. Under the assumption that only the Upmost Purple TV adapter uses this invalid address, this fix should do the trick. Signed-off-by: NJean Delvare <khali@linux-fr.org> Acked-by: Nhermann pitton <hermann-pitton@arcor.de> Acked-by: NJarod Wilson <jarod@redhat.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Jean Delvare 提交于
Recent fixes to the em28xx and saa7134 drivers have been overzealous. While the ir-kbd-i2c platform data indeed needs to be persistent, the struct i2c_board_info doesn't, as it is only used by i2c_new_device(). So revert a part of the original fixes, to save some memory. Signed-off-by: NJean Delvare <khali@linux-fr.org> Acked-by: NJarod Wilson <jarod@redhat.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Michael Krufky 提交于
Thanks to Terry Wu for finding the GPIOs required for svideo / composite input Cc: Terry Wu <terrywu2009@gmail.com> Signed-off-by: NMichael Krufky <mkrufky@kernellabs.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Danny Wood 提交于
V4L/DVB (13168): Add support for Asus Europa Hybrid DVB-T card (SAA7134 SubVendor ID: 0x1043 Device ID: 0x4847) Adds the device IDs and driver linking to allow the Asus Europa DVB-T card to operate with these drivers. The device has a SAA7134 chipset with a TD1316 Hybrid Tuner. All inputs work on the card including switching between DVB-T and Analogue TV, there is also no IR with this card. [mchehab@redhat.com: CodingStyle fixes] Signed-off-by: NDanny Wood <danwood76@gmail.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Michael Krufky 提交于
Signed-off-by: NMichael Krufky <mkrufky@kernellabs.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Devin Heitmueller 提交于
Dmitri's patch for the Behold X7 didn't use the #define I had setup for XC5000_RADIO_FM1, so cut over to using that instead of "1". Signed-off-by: NDevin Heitmueller <dheitmueller@kernellabs.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
Add support for the digital side of the Behold X7 Signed-off-by: NBeholder Intl. Ltd. Dmitry Belimov <d.belimov@gmail.com> Signed-off-by: NDevin Heitmueller <dheitmueller@kernellabs.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
- 09 11月, 2009 1 次提交
-
-
由 Peter Huewe 提交于
Trivial patch which adds the __init/__exit macros to the module_init/ module_exit functions of the following drivers in media video: drivers/media/video/ivtv/ivtv-driver.c drivers/media/video/cx18/cx18-driver.c drivers/media/video/davinci/dm355_ccdc.c drivers/media/video/davinci/dm644x_ccdc.c drivers/media/video/saa7164/saa7164-core.c drivers/media/video/saa7134/saa7134-core.c drivers/media/video/cx23885/cx23885-core.c Signed-off-by: NPeter Huewe <peterhuewe@gmx.de> Acked-by: NAndy Walls <awalls@radix.net> Acked-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: NMuralidharan Karicheri <m-karicheri2@ti.com> Acked-By: NSteven Toth <stoth@kernellabs.com> Signed-off-by: NJiri Kosina <jkosina@suse.cz>
-
- 07 11月, 2009 2 次提交
-
-
由 Michael Krufky 提交于
The Hauppauge WinTV HVR-1150 retail boards require the FORCE_TS_VALID bit to be set in order to function properly. This change will work on the early revisions on the board as well, but the final revision will not function without this change. Signed-off-by: NMichael Krufky <mkrufky@kernellabs.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Michael Krufky 提交于
When FORCE_TS_VALID mode is enabled, the saa713x will accept MPEG TS input without requiring TS_VALID set high. This is required for some new boards to function properly, due to the hardware design implementation. The configuration is toggled within the board setup configuration. Boards that do not have this bit set will function as before with no change. Signed-off-by: NMichael Krufky <mkrufky@kernellabs.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
- 19 9月, 2009 1 次提交
-
-
由 Dmitry Belimov 提交于
Change tuner type to correct for BeholdTV cards with FM1216MK5. Cc: Hermann Pitton <hermann-pitton@arcor.de> Signed-off-by: NBeholder Intl. Ltd. Dmitry Belimov <d.belimov@gmail.com> Signed-off-by: NDouglas Schilling Landgraf <dougsland@redhat.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-