This adds the bootwrapper for the cuImage target and a compatible property
check for "pnpPNP,501" to the generic serial console support code.
The default link address for the cuImage target is set to 0x800000. This
allows to boot the kernel with AmigaOS4's second level bootloader, which
always loads a uImage at 0x500000.
Signed-off-by: NGerhard Pircher <gerhard_pircher@gmx.net>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

This device tree does not provide the correct CPU name, as various CPU
models and revisions are used in AmigaOnes. Also the PCI root node does
not contain a interrupt mapping property, as all boards have different
interrupt routing. However the kernel can do a 1:1 mapping of all PCI
interrupts, as only i8259 legacy interrupts are used.
Signed-off-by: NGerhard Pircher <gerhard_pircher@gmx.net>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

This commit adds the setup code for booting Linux on AmigaOne G3SE (G3
only), AmigaOne XE and uA1 (G3/G4) desktop computers. These boards were
sold by Eyetech and are based on MAI Logic's Teron boards and its
Articia S northbridge.
The AmigaOne uses U-boot as firmware, which doesn't support a flattened
device tree yet. The northbridge has some design flaws, which makes it
necessary to use non cacheable memory for DMA operations
(CONFIG_NOT_COHERENT_CACHE) and to avoid setting the coherence (M) flag
for memory pages.
Signed-off-by: NGerhard Pircher <gerhard_pircher@gmx.net>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

The EEH code disables and enables interrupts during the
device recovery process.  This is unnecessary for MSI
and MSI-X interrupts because they are effectively disabled
by the DMA Stopped state when an EEH error occurs.  The
current code is also incorrect for MSI-X interrupts.  It
doesn't take into account that MSI-X interrupts are tracked
in a different way than LSI/MSI interrupts.  This patch
ensures only LSI interrupts are disabled/enabled.
Signed-off-by: NMike Mason <mmlnx@us.ibm.com>
Acked-by: NLinas Vepstas <linasvepstas@gmail.com>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

After the last changes, the mv643xx_eth driver now detects
a spurious interface on port 0. Since only port 1 is actually
connected to a PHY, remove its description.
Signed-off-by: NGabriel Paubert <paubert@iram.es>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

We currently place mmaps just below the stack on 32bit, but leave them
in the middle of the address space on 64bit:

00100000-00120000 r-xp 00100000 00:00 0                    [vdso]
10000000-10010000 r-xp 00000000 08:06 179534               /tmp/sleep
10010000-10020000 rw-p 00000000 08:06 179534               /tmp/sleep
10020000-10130000 rw-p 10020000 00:00 0                    [heap]
40000000000-40000030000 r-xp 00000000 08:06 440743         /lib64/ld-2.9.so
40000030000-40000040000 rw-p 00020000 08:06 440743         /lib64/ld-2.9.so
40000050000-400001f0000 r-xp 00000000 08:06 440671         /lib64/libc-2.9.so
400001f0000-40000200000 r--p 00190000 08:06 440671         /lib64/libc-2.9.so
40000200000-40000220000 rw-p 001a0000 08:06 440671         /lib64/libc-2.9.so
40000220000-40008230000 rw-p 40000220000 00:00 0
fffffbc0000-fffffd10000 rw-p fffffeb0000 00:00 0           [stack]

Right now it isn't an issue, but at some stage we will run into mmap or
hugetlb allocation issues. Using the same layout as 32bit gives us a
some breathing room. This matches what x86-64 is doing too.

00100000-00103000 r-xp 00100000 00:00 0                    [vdso]
10000000-10001000 r-xp 00000000 08:06 554894               /tmp/test
10010000-10011000 r--p 00000000 08:06 554894               /tmp/test
10011000-10012000 rw-p 00001000 08:06 554894               /tmp/test
10012000-10113000 rw-p 10012000 00:00 0                    [heap]
fffefdf7000-ffff7df8000 rw-p fffefdf7000 00:00 0
ffff7df8000-ffff7f97000 r-xp 00000000 08:06 130591         /lib64/libc-2.9.so
ffff7f97000-ffff7fa6000 ---p 0019f000 08:06 130591         /lib64/libc-2.9.so
ffff7fa6000-ffff7faa000 r--p 0019e000 08:06 130591         /lib64/libc-2.9.so
ffff7faa000-ffff7fc0000 rw-p 001a2000 08:06 130591         /lib64/libc-2.9.so
ffff7fc0000-ffff7fc4000 rw-p ffff7fc0000 00:00 0
ffff7fc4000-ffff7fec000 r-xp 00000000 08:06 130663         /lib64/ld-2.9.so
ffff7fee000-ffff7ff0000 rw-p ffff7fee000 00:00 0
ffff7ffa000-ffff7ffb000 rw-p ffff7ffa000 00:00 0
ffff7ffb000-ffff7ffc000 r--p 00027000 08:06 130663         /lib64/ld-2.9.so
ffff7ffc000-ffff7fff000 rw-p 00028000 08:06 130663         /lib64/ld-2.9.so
ffff7fff000-ffff8000000 rw-p ffff7fff000 00:00 0
fffffc59000-fffffc6e000 rw-p ffffffeb000 00:00 0           [stack]
Signed-off-by: NAnton Blanchard <anton@samba.org>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

move the definition of hose_list next to its hotplug spinlock.

create pcibios_io_size to encapsulate ifdef in existing pci-common
function pcibios_vaddr_is_ioport

move pci_address_to_pio to pci-common, using new pcibios_io_size, and
protect this GPL exported function against concurrent hotplug removal
Signed-off-by: NMilton Miller <miltonm@bga.com>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

If we can't allocate the requested number of MSIs, we can still tell the
generic code how many we were able to allocate. That can then be passed
onto the driver, allowing it to request that many in future, and
probably succeeed.
Signed-off-by: NMichael Ellerman <michael@ellerman.id.au>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

We also need to check that the device isn't using MSI-X in the irq fixup
routine, otherwise we might leave MSI-Xs configured at boot.
Signed-off-by: NMichael Ellerman <michael@ellerman.id.au>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

Firmware encodes the number of MSI-X requested by a device in a

different property than for MSI. Pull the property name out as a
parameter and share the logic for both cases.
Signed-off-by: NMichael Ellerman <michael@ellerman.id.au>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

We need to increment i in the loop that queries what interrupts firmware
gave us, otherwise we'll incorrectly use the first value over and over.
Signed-off-by: NMichael Ellerman <michael@ellerman.id.au>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

The lmb debugging can be turned on at boottime with lmb=debug on the
command line. However on powerpc that doesn't work, because we don't
necessarily call lmb_dump_all().

So always call lmb_dump_all() after lmb_analyze(), no output is
generated unless lmb=debug is found on the command line.
Signed-off-by: NMichael Ellerman <michael@ellerman.id.au>
Acked-by: NDavid S. Miller <davem@davemloft.net>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

Signed-off-by: NMichael Ellerman <michael@ellerman.id.au>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

Since we never hotplug add an isa bus, we never need to set primary.
Delete this write-only variable.
Signed-off-by: NMilton Miller <miltonm@bga.com>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

Use of_get_cpu_node, which is a superset of numa.c's find_cpu_node in
a less restrictive section (text vs cpuinit).
Signed-off-by: NMilton Miller <miltonm@bga.com>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

find_min_common_depth() was checking the property length incorrectly.
The value is in bytes not cells, and it is using the second entry.
Signed-off-By: NMilton Miller <miltonm@bga.com>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

arch/powerpc/platforms/pseries/hotplug-memory.c uses
remove_section_mapping() but doesn't include sparsemem.h which defines
it.  This can cause compilation fails for some configs.
Signed-off-by: NMichael Neuling <mikey@neuling.org>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

The new legacy_mem file in sysfs is causing problems with X on machines
that don't support legacy memory access. The way I initially implemented
it, we would fail with -ENXIO when trying to mmap it, thus exposing to
X that we do support the API but there is no legacy memory.

Unfortunately, X poor error handling is causing it to fail to start when
it gets this error.

This implements a workaround hack that instead maps anonymous memory
instead (using shmem if VM_SHARED is set, just like /dev/zero does).
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

arch/powerpc/oprofile/cell/spu_profiler.c is missing a asm/time.h
include which is required for ppc_proc_freq.  This can cause compile
failures for some config combinations.
Signed-off-by: NMichael Neuling <mikey@neuling.org>
Acked-by: NArnd Bergmann <arnd@arndb.de>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

Impact: fix dynamic ftrace with large modules in PPC64

The math to calculate the offset into the TOC that is taken from reading
the trampoline is incorrect. The bottom half of the offset is a signed
extended short. The current code was using an OR to create the offset
when it should have been using an addition.
Signed-off-by: NSteven Rostedt <srostedt@redhat.com>
Acked-by: NGeoff Levand <geoffrey.levand@am.sony.com>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

Currently emulate_step() emulates mr. instructions without updating cr0
and this can be disastrous. Don't emulate mr.

This bug has been around for a while, but I am not sure if its a worthy
-stable candidate. I'll leave it to Ben do decide.
Signed-off-by: NAnanth N Mavinakayanahalli <ananth@in.ibm.com>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

Fixed v_mapped_by_tlbcam() and p_mapped_by_tlbcam() to use phys_addr_t
instead of unsigned long.  In 36-bit physical mode we really need these
functions to deal with phys_addr_t when trying to match a physical
address or when returning one.
Signed-off-by: NKumar Gala <galak@kernel.crashing.org>

in_interrupt() requires #inclusion of linux/hardirq.h not asm/hardirq.h now.
Signed-off-by: NDavid Howells <dhowells@redhat.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Architectures other than mips and x86 are not using ticket spinlocks.
Therefore, the contention on the lock is meaningless, since there is
nobody known to be waiting on it (arguably /fairly/ unfair locks).

Dummy it out to return 0 on other architectures.
Signed-off-by: NKyle McMartin <kyle@redhat.com>
Acked-by: NRalf Baechle <ralf@linux-mips.org>
Acked-by: NIngo Molnar <mingo@elte.hu>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

This is based upon a report from Chris Torek and his initial patch.
From Chris's report:

--------------------
This came up in testing kgdb, using the built-in tests -- turn
on CONFIG_KGDB_TESTS, then

    echo V1 > /sys/module/kgdbts/parameters/kgdbts

-- but it would affect using kgdb if you were debugging and looking
at bad pointers.
--------------------

When we get a copy_{from,to}_user() request and the %asi is set to
something other than ASI_AIUS (which is userspace) then we branch off
to a routine called memcpy_user_stub().  It just does a straight
memcpy since we are copying from kernel to kernel in this case.

The logic was that since source and destination are both kernel
pointers we don't need to have exception checks.

But for what probe_kernel_{read,write}() is trying to do, we have to
have the checks, otherwise things like kgdb bad kernel pointer
accesses don't do the right thing.
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This is an implementation of a suggestion made by Chris Torek:
--------------------
Something else I noticed in passing: the EX and EX_LD/EX_ST macros
scattered throughout the various .S files make a fair bit of .fixup
code, all of which does the same thing.  At the cost of one symbol
in copy_in_user.S, you could just have one common two-instruction
retl-and-mov-1 fixup that they all share.
--------------------

The following is with a defconfig build:

   text	   data	    bss	    dec	    hex	filename
3972767	 344024	 584449	4901240	 4ac978	vmlinux.orig
39688877	 344024	 584449	4897360	 4aba50	vmlinux
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

One of my past fixes to this code introduced a different new bug.
When using 32-bit "int $0x80" entry for a bogus syscall number,
the return value is not correctly set to -ENOSYS.  This only happens
when neither syscall-audit nor syscall tracing is enabled (i.e., never
seen if auditd ever started).  Test program:

	/* gcc -o int80-badsys -m32 -g int80-badsys.c
	   Run on x86-64 kernel.
	   Note to reproduce the bug you need auditd never to have started.  */

	#include <errno.h>
	#include <stdio.h>

	int
	main (void)
	{
	  long res;
	  asm ("int $0x80" : "=a" (res) : "0" (99999));
	  printf ("bad syscall returns %ld\n", res);
	  return res != -ENOSYS;
	}

The fix makes the int $0x80 path match the sysenter and syscall paths.
Reported-by: NDmitry V. Levin <ldv@altlinux.org>
Signed-off-by: NRoland McGrath <roland@redhat.com>

Simply add appropriate sdhci nodes.

Note that U-Boot should configure pin multiplexing for eSDHC prior
to Linux could use it. U-Boot should also fill-in the clock-frequency
property (eSDHC clock depends on board-specific SCCR[ESDHCCM] bits).
Signed-off-by: NAnton Vorontsov <avorontsov@ru.mvista.com>
Signed-off-by: NKumar Gala <galak@kernel.crashing.org>

- sdhc node renamed to sdhci ("sdhc" name is confusing since SDHC is
  used to name Secure Digital High Capacity cards, while SDHCI is an
  interface).

- Get rid of "fsl,esdhc" compatible entry, it's replaced by the
  "fsl,<chip>-esdhc" scheme;

- Get rid of `model' property.
Signed-off-by: NAnton Vorontsov <avorontsov@ru.mvista.com>
Signed-off-by: NKumar Gala <galak@kernel.crashing.org>

Taking sizeof the result of sizeof is quite strange and does not seem to be
what is wanted here.

This was fixed using the following semantic patch.
(http://www.emn.fr/x-info/coccinelle/)

// <smpl>
@@
expression E;
@@

- sizeof (
  sizeof (E)
- )

@@
type T;
@@

- sizeof (
  sizeof (T)
- )
// </smpl>
Signed-off-by: NJulia Lawall <julia@diku.dk>
Acked-by: NScott Wood <scottwood@freescale.com>
Signed-off-by: NKumar Gala <galak@kernel.crashing.org>

This is a simple change to correct problems when using set_irq_type
on platforms using CPM2.  This code corrects the problem on most platform
but may have issues on 8272 derived platforms for some interrupts.

On 8272 PC2 & 3 are missing and PC 23 & 29 are added, which this patch
does not address.
Signed-off-by: NPaul Bilke <paul@conspiracy.net>
Reviewed-by: NAnton Vorontsov <avorontsov@ru.mvista.com>
Signed-off-by: NKumar Gala <galak@kernel.crashing.org>

TSEC0 is connected to Vitesse 7385 5-port switch. The switch
isn't connected to any mdio bus, the link to the switch is fixed
to Full-duplex 1000 Mb/s (no pause).

This patch fixes following failure during bootup:

mdio@24520:01 not found
eth0: Could not attach to PHY
IP-Config: Failed to open eth0
Signed-off-by: NAnton Vorontsov <avorontsov@ru.mvista.com>
Signed-off-by: NKumar Gala <galak@kernel.crashing.org>

commit b31a1d8b ("gianfar: Convert
gianfar to an of_platform_driver") introduced a child node for
the ethernet@25000 controller, but no address and size cells
specifiers were added, and that makes dtc unhappy:

DTC: dts->dtb  on file "arch/powerpc/boot/dts/mpc8313erdb.dts"
Warning (reg_format): "reg" property in /soc8313@e0000000/ethernet@25000/mdio@25520 has invalid length (8 bytes) (#address-cells == 2, #size-cells == 1)
Warning (avoid_default_addr_size): Relying on default #address-cells value for /soc8313@e0000000/ethernet@25000/mdio@25520
Warning (avoid_default_addr_size): Relying on default #size-cells value for /soc8313@e0000000/ethernet@25000/mdio@25520
Signed-off-by: NAnton Vorontsov <avorontsov@ru.mvista.com>
Signed-off-by: NKumar Gala <galak@kernel.crashing.org>

I noticed this doing some randconfig testing (.config below).  I have
CONFIG_PM but no CONFIG_SUSPEND.  Bug is against mainline.

arch/powerpc/sysdev/built-in.o: In function `ipic_suspend':
ipic.c:(.text+0x6b34): undefined reference to `fsl_deep_sleep'
make[1]: *** [.tmp_vmlinux1] Error 1
make: *** [sub-make] Error 2

Looks like #ifdef CONFIG_PM in arch/powerpc/sysdev/ipic.c should be
CONFIG_SUSPEND.  d49747bd introduced
this.

Fix build when we have CONFIG_PM but no CONFIG_SUSPEND.
Signed-off-by: NMichael Neuling <mikey@neuling.org>
Acked-by: NScott Wood <scottwood@freescale.com>
Signed-off-by: NKumar Gala <galak@kernel.crashing.org>

They can't be used for profiling and NMI watchdog currently
since they lack the counter overflow interrupt.
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Prevent kprobes from catching spurious faults which will cause infinite
recursive page-fault and memory corruption by stack overflow.
Signed-off-by: NMasami Hiramatsu <mhiramat@redhat.com>
Cc: <stable@kernel.org>		[2.6.28.x]
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Do usual do {} while (0) dance, otherwise

fs/gfs2/util.c:99: error: expected expression before 'else'
drivers/scsi/lpfc/lpfc_sli.c:363: error: expected expression before 'else'
Signed-off-by: NAlexey Dobriyan <adobriyan@gmail.com>
Acked-by: NIvan Kokshaysky <ink@jurassic.park.msu.ru>
Cc: Richard Henderson <rth@twiddle.net>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

At this time, the PowerNow! driver for K8 uses an experimentally
derived formula to calculate transition latency.  The value it
provides is orders of magnitude too large on modern systems.
This patch replaces the formula with ACPI _PSS latency values
for more accuracy and better performance.

I've tested it on two 2nd generation Opteron systems, a 3rd
generation Operton system, and a Turion X2 without seeing any
stability problems.
Signed-off-by: NMark Langsdorf <mark.langsdorf@amd.com>
Signed-off-by: NThomas Renninger <trenn@suse.de>
Signed-off-by: NDave Jones <davej@redhat.com>

This patch makes the ROM reading code return an error to user space if
the size of the ROM read is equal to 0.

The patch also emits a warnings if the contents of the ROM are invalid,
and documents the effects of the "enable" file on ROM reading.
Signed-off-by: NTimothy S. Nelson <wayland@wayland.id.au>
Acked-by: NAlex Villacis-Lasso <a_villacis@palosanto.com>
Signed-off-by: NJesse Barnes <jbarnes@virtuousgeek.org>

Signed-off-by: NDavid S. Miller <davem@davemloft.net>