Just a small refactoring to make the next patch slightly simpler.
Signed-off-by: NDavid Henningsson <david.henningsson@canonical.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Lenovo Ideapad with ALC272 has a mute LED that is controlled via
GPIO1.  Add a simple vmaster hook for it.

Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=16373Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Implement reset_resume callback so that the mixer values are properly
restored.  Still no boot quirks are called, so it might not work well
on some devices.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

The commit 44dcbbb1 introduced the usage of bitreverse helpers but
forgot to add the dependency.  This patch adds the selection for
CONFIG_BITREVERSE.

Fixes: 44dcbbb1 ('ALSA: snd-usb: add support for bit-reversed byte formats')
Reported-by: NFengguang Wu <fengguang.wu@intel.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Commit 384a48d7 "ALSA: hda: HDMI: Support codecs with fewer cvts
than pins" dynamically enabled each pin widget's PIN_OUT only when the
pin was actively in use. This was required on certain NVIDIA CODECs for
correct operation. Specifically, if multiple pin widgets each had their
mux input select the same audio converter widget and each pin widget had
PIN_OUT enabled, then only one of the pin widgets would actually receive
the audio, and often not the one the user wanted!

However, this apparently broke some Intel systems, and commit
6169b673 "ALSA: hda - Always turn on pins for HDMI/DP" reverted the
dynamic setting of PIN_OUT. This in turn broke the afore-mentioned NVIDIA
CODECs.

This change supports either dynamic or static handling of PIN_OUT,
selected by a flag set up during CODEC initialization. This flag is
enabled for all recent NVIDIA GPUs.
Reported-by: NUosis <uosisl@gmail.com>
Cc: <stable@vger.kernel.org> # v3.13
Signed-off-by: NStephen Warren <swarren@nvidia.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

While looking into some spurious responses, I found that the addr value was
treated a bit inconsistent: values 8..0xf will be treated as codec 0 and
values 0..7 will be treated as no error regardless of whether there is a codec
there, or not.

With this patch, all non-existing codecs will be treated equally.
In addition, printing rp and wp could help figuring out if the wp value is
reported wrongly from the controller or if something else is wrong.
Signed-off-by: NDavid Henningsson <david.henningsson@canonical.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Now all weird setups have been converted to fixups for the generic
parser, and we can disable the static quirks.  This commit just turns
the build off.  The bulky static quirk code still remains for a while,
in case we get an overlooked regression.  It'll be removed at the next
kernel version.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Both CX20549 and CX20551 codecs have a mixer widget and it can be
connected as the ADC source.  Like AD and VIA codecs, enable the
add_stereo_mix_input flag for these codecs.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

CX20549 has an aamixer widget at NID 0x17.  Let's enable it.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

For the generic parser, use the standard fixup matching.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

This laptop with CX20549 codec misses the internal mic at NID 0x12.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

We need to fix bogus pincfgs on this machine, but it works well else.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Apply the amp cap override for CX20549 mixer widget in case where the
generic parser is used, too.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

OLPC XO needs a few special handling.  Now these are implemented as a
fixup to the generic parser.

Obviously, the DC BIAS mode had to be added manually.  This is mainly
implemented in the mic_autoswitch hook, where the mic pins are
overwritten depending on the DC bias mode.  This also required the
override of the mic boost control, since the mic boost is applied only
when the DC mode is disabled.

In addition, the mic pins must be set dynamically at recording time
because these also control the LED.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

... by using snd_Hda_codec_update_cache() instead of *_write_cache().
Since all path elements should have been updated by this function,
we are safe to assume that the cache contents are consistent.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Like other codecs, apply a specific fixup given by a model string.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

When we plug a 3-ring headset on the Dell machine (Vendor ID:
0x10ec0255, Subsystem ID: 0x1028064d), the headset mic can't be
detected, after apply this patch, the headset mic can work well.

BugLink: https://bugs.launchpad.net/bugs/1260303
Cc: David Henningsson <david.henningsson@canonical.com>
Tested-by: NDoro Wu <fan-cheng.wu@canonical.com>
Cc: stable@vger.kernel.org
Signed-off-by: NHui Wang <hui.wang@canonical.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Remove old SPI control functions, change anti-pop init
sequence, remove some garbage from structures. The 'Apply' functions
must be called at the mixer initialization, otherwise
mixer settings sometimes will not be applied at startup.
Signed-off-by: NRoman Volkov <v1ron@mail.ru>
Signed-off-by: NClemens Ladisch <clemens@ladisch.de>

Change the 'put' function of the high-pass filter control to use the new
SPI functions.
Signed-off-by: NRoman Volkov <v1ron@mail.ru>
Signed-off-by: NClemens Ladisch <clemens@ladisch.de>

First of all, we should not touch the GPIOs. They are not
for selecting the capture source, but they seems just enable
the whole audio input curcuit. The 'put' function calls the
'apply' functions to change register values. Change the order
of capture sources.
Signed-off-by: NRoman Volkov <v1ron@mail.ru>
Signed-off-by: NClemens Ladisch <clemens@ladisch.de>

Modify the input_vol_* functions to use the new SPI routines,
There is a new applying function that will be called when
the capture source changed.
Signed-off-by: NRoman Volkov <v1ron@mail.ru>
Signed-off-by: NClemens Ladisch <clemens@ladisch.de>

I tried both variants: volume control and impedance selector.
In the first case one minus is that we can't change the
volume of multichannel output without additional software
volume control. However, I am using this variant for the
last three months and this seems good. All multichannel
speaker systems have internal amplifier with the
volume control included, but not all headphones have
this regulator. In the second case, my software volume
control does not save the value after reboot.
Signed-off-by: NRoman Volkov <v1ron@mail.ru>
Signed-off-by: NClemens Ladisch <clemens@ladisch.de>

Change the order of elements in the output select control. This will
reduce the number of relay switches. Change 'put' function to call the
oxygen_update_dac_routing() function. Otherwise multichannel playback
does not work. Also there is a new function to apply settings, this
prevents from duplicating the code.
Signed-off-by: NRoman Volkov <v1ron@mail.ru>
Signed-off-by: NClemens Ladisch <clemens@ladisch.de>

Actually CS4245 connected to the I2S channel 1 for
capture, not channel 2. Otherwise capturing and
playback does not work for CS4245.
Signed-off-by: NRoman Volkov <v1ron@mail.ru>
Signed-off-by: NClemens Ladisch <clemens@ladisch.de>

Moving the mixer code away makes things easier. The mixer
will control the driver, so the functions of the
driver need to be non-static.
Signed-off-by: NRoman Volkov <v1ron@mail.ru>
Signed-off-by: NClemens Ladisch <clemens@ladisch.de>

Change the function to read the data from the new shadow buffer.
Signed-off-by: NRoman Volkov <v1ron@mail.ru>
Signed-off-by: NClemens Ladisch <clemens@ladisch.de>

When selecting the audio output destinations (headphones,
FP headphones, multichannel output), the channel routing
should be changed depending on what destination selected.
Also unnecessary I2S channels are digitally muted. This
function called when the user selects the destination
in the ALSA mixer.
Signed-off-by: NRoman Volkov <v1ron@mail.ru>
Signed-off-by: NClemens Ladisch <clemens@ladisch.de>

When selecting the audio sample rate for CS4245,
the MCLK divider should also be changed.
Signed-off-by: NRoman Volkov <v1ron@mail.ru>
Signed-off-by: NClemens Ladisch <clemens@ladisch.de>

Change CS4245 initialization: different sequence and GPIO values,
according to datasheets and reverse-engineering information.
Change cleanup/resume/suspend functions, since they use
initialization.
Signed-off-by: NRoman Volkov <v1ron@mail.ru>
Signed-off-by: NClemens Ladisch <clemens@ladisch.de>

Add the new SPI write and read functions. The SPI read function
is used for creating initial registers dump and may be used for
debugging purposes. SPI operations are cached, so there is a new
function to manage the cache (shadow). I have to remove
the shift from the CS4245_SPI_* constants, since when
we are performing the reading, we need to shift by 8 instead
of 16.
Signed-off-by: NRoman Volkov <v1ron@mail.ru>
Signed-off-by: NClemens Ladisch <clemens@ladisch.de>

Add additional constants to the xonar_dg.h file:
capture and playback sources. Move GPIO_* constants and the
dg struct to the header file from the xonar_dg.c file.
Signed-off-by: NRoman Volkov <v1ron@mail.ru>
Signed-off-by: NClemens Ladisch <clemens@ladisch.de>

Add some additional information in comments and my copyright.
Signed-off-by: NRoman Volkov <v1ron@mail.ru>
Signed-off-by: NClemens Ladisch <clemens@ladisch.de>

When the user switches the output from stereo to multichannel
or vice versa, the driver needs to update the channel routing.
Instead of creating additional subroutines, I better export existing
oxygen_update_dac_routing symbol from the oxygen mixer
and call this function. It calls model.adjust_dac_routing()
and my function does the work.
Signed-off-by: NRoman Volkov <v1ron@mail.ru>
Signed-off-by: NClemens Ladisch <clemens@ladisch.de>

The Xonar DG/DGX driver needs this mask to mute unnecessary
channels.
Signed-off-by: NRoman Volkov <v1ron@mail.ru>
Signed-off-by: NClemens Ladisch <clemens@ladisch.de>

Modify the oxygen_write_spi() function to use the newly
introduced oxygen_wait_spi() function. Change return value
from void to int, so it can return error codes. Older
drivers just ignore that return value, new drivers can
check this value. We need to wait AFTER
initiating the SPI transaction, otherwise read
operation will not work.
Signed-off-by: NRoman Volkov <v1ron@mail.ru>
Signed-off-by: NClemens Ladisch <clemens@ladisch.de>

The oxygen_wait_spi() function now performs waiting when the
SPI bus completes a transaction. Introduce the timeout error
checking and increase timeout to 200 from 40.
Signed-off-by: NRoman Volkov <v1ron@mail.ru>
Signed-off-by: NClemens Ladisch <clemens@ladisch.de>

Processing coefficients are often a vital part of the codec's configuration,
so dumping them can be important. However, because they are undocumented and
secret, we do not want to enable this for all codecs by default.

Therefore instead add this as a debugging parameter.

I have prepared for codecs that want to enable this by default by the extra
dump_coef bitfield, but unsure if we want to do that as long as the
(unlikely, but still) race remains.
Signed-off-by: NDavid Henningsson <david.henningsson@canonical.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Currently the Negative Terminal Input Routing Configuration is only set
when there is a special routing configuration. If we don't use one of
the inputs IN1 or IN2 as negative terminal input, the PGA and recording
does not work.

This patch adds a route from CM1L/CM1R to the PGA as negative input by
default. With this configuration the PGA can amplify all input signals
and line-in/mic works again.
Signed-off-by: NMarkus Pargmann <mpa@pengutronix.de>
Signed-off-by: NMark Brown <broonie@linaro.org>

Playback of a mono stream should output the same stream on both
channels. At the moment only the left analog signal is valid, the right
one is just noise.

This patch maps the left digital channel onto both DACs when receiving a
mono stream.
Signed-off-by: NMarkus Pargmann <mpa@pengutronix.de>
Signed-off-by: NMark Brown <broonie@linaro.org>

Similarly to other Apple products, MBA 1,1 needs a specific quirk.
Pin 0x18 must be set to VREF_50 to have sound output.  This was no
longer done since commit 1a97b7f2, resulting in a mute built-in speaker.

This patch corrects the regression by creating a fixup for the MBA 1,1.

Fixes: 1a97b7f2 ("ALSA: hda/realtek - Remove the last static quirks for ALC882")
Cc: <stable@vger.kernel.org> [v3.4+]
Tested-by: NAdrien Vergé <adrienverge@gmail.com>
Signed-off-by: NAdrien Vergé <adrienverge@gmail.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>