Patch from Ben Dooks

Move the UPLL clock registration to the central
clock file, and add an enable method
Signed-off-by: NBen Dooks <ben-linux@fluff.org>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

Patch from Ben Dooks

Add selection for timer code for the Simtec Osiris
Signed-off-by: NBen Dooks <ben-linux@fluff.org>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

Patch from Ben Dooks

Support for Simtec IM2440D20 CPU modules (Osiris)
Signed-off-by: NBen Dooks <ben-linux@fluff.org>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

Patch from Nicolas Pitre

This field is redundent since it must be equal to PHYS_OFFSET anyway.

There is no reference to it anymore so remove it at last.
Signed-off-by: NNicolas Pitre <nico@cam.org>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

Some SoCs have multiple VIC devices.  Adapt the generic vic code
to allow multiple implementations to be handled.
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

In all current use cases, "chipdata" is used to store an iomem address.
Mark it with __iomem, and rename it to 'base'.  Leave the accessor macros
alone.
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

Allow the individual coprocessor handlers to decide when to enable
interrupts, rather than unconditionally enabling them.
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

asm/hardware.h is not required for the majority of processor support
files, ioremap support, mm initialisation, acorn IO support, nor
the debug code (which picks up its machine specific includes via
debug-macros.S)
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

Unfortunately, OMAP platforms without the 32K timer left HZ set to
an empty value.  Fix this by making the dependency on OMAP_32K_TIMER
rather than OMAP_32K_TIMER_HZ.
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

asm/arch/irq.h used to be included from asm/irq.h, but was removed
from the ARM kernel a long time ago.  Consequently, the contents
of asm/arch/irq.h (which mostly contain a definition for fixup_irq())
have not been used.  Hence, remove asm/arch/irq.h.

Some machine support files incorrectly included this file, making
little or no use of the contents.  Move the contents to a local
include file, and remove those include statements as well.
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

Move the HZ definition into Kconfig, and set appropriate defaults
for platforms.  Remove mostly empty asm/arch/param.h include file.
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

    
Put in a blank line between CPU entries in /proc/cpuinfo, just like
most other architectures (i386, ia64, x86_64) do.
Signed-off-by: NMartin Michlmayr <tbm@cyrius.com>
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

---

    
This patch adjusts the offset argument passed into sys_mmap2 to be
always shifted 12, even when the native page size isn't 4K.  This is
what all existing userspace libraries expect.
Signed-off-by: NH. Peter Anvin <hpa@zytor.com>
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

---

    
The TX49XX has the prefetch instruction.  It supports only Pref_Load
(hint 0).  Actually changes in this patch except for Kconfig are not
have any effects, I added these changes to prevent misuse of unsupported
hints.
Signed-off-by: NAtsushi Nemoto <anemo@mba.ocn.ne.jp>
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

    
Basically identical to c-r4k.c, so maintaining one is really enough.
Signed-off-by: NThiemo Seufer <ths@networkno.de>
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

    
Dump all the ridiculously complicated stuff that was needed support
compilers older and newer than 3.0.
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
Signed-off-by: NThiemo Seufer <ths@networkno.de>

    
Mention the Broadcom part number for the BigSur board (BCM91480B)
in Kconfig, just like it's done for other Broadcom boards.
Signed-off-by: NMartin Michlmayr <tbm@cyrius.com>
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

    
This option is no longer usable with supported compilers.  It will be
replaced by usage of -msym32 in a separate patch.
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

Signed-off-by: NAtsushi Nemoto <anemo@mba.ocn.ne.jp>
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

Signed-off-by: NAtsushi Nemoto <anemo@mba.ocn.ne.jp>
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

    
Move function prototypes to asm/signal.h to detect trivial errors and
add some __user tags to get rid of sparse warnings.  Generated code
should not be changed.
Signed-off-by: NAtsushi Nemoto <anemo@mba.ocn.ne.jp>
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

Signed-off-by: NMartin Michlmayr <tbm@cyrius.com>
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

    
SMP bits needed to builds and run an SMP kernel.  While only a single
processor is supported ATM it's still useful for some SMP debugging using
Qemu.
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

    
Use blast_scache_range, blast_inv_scache_range for rm7k scache routine.
Output code should be logically same.
Signed-off-by: NAtsushi Nemoto <anemo@mba.ocn.ne.jp>
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

Signed-off-by: NPeter Horton <pdh@colonel-panic.org>
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

The AES setkey routine writes 64 bytes to the E_KEY area even though
there are only 60 bytes there.  It is in fact safe since E_KEY is
immediately follwed by D_KEY which is initialised afterwards.  However,
doing this may trigger undefined behaviour and makes Coverity unhappy.

So by combining E_KEY and D_KEY into one array we sidestep this issue
altogether.

This problem was reported by Adrian Bunk.
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

ALCHEMY:  Add OHCI support for AU1200

Updated by moving the OHCI support out of the EHCI patch.
Signed-off-by: NJordan Crouse <jordan.crouse@amd.com>
Signed-off-by: NDavid Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

ALCHEMY:  Add EHCI support for AU1200

Updated by removing the OHCI support
Signed-off-by: NJordan Crouse <jordan.crouse@amd.com>
Signed-off-by: NDavid Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

This patch adds the ability to mark symbols that will be changed in the
future, so that kernel modules that don't include MODULE_LICENSE("GPL")
and use the symbols, will be flagged and printed out to the system log.
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

platform_get_irq*() now returns on -ENXIO when the resource cannot be
found.  Ensure all users of platform_get_irq*() handle this error
appropriately.
Signed-off-by: NDavid Vrabel <dvrabel@arcom.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

The i386 defconfig wasn't updated for ages.

Instead of running "make oldconfig" on the old defconfig and trying to
give reasonable answers at all new options, this patch replaces it with
the one I'm using in 2.6.16-rc1.

This way, it's a .config that is confirmed to work on at least one
computer in the world.  ;-)
Signed-off-by: NAdrian Bunk <bunk@stusta.de>

Signed-off-by: NDavid S. Miller <davem@davemloft.net>

1) huge_pte_offset() did not check the page table hierarchy
   elements as being empty correctly, resulting in an OOPS

2) Need platform specific hugetlb_get_unmapped_area() to handle
   the top-down vs. bottom-up address space allocation strategies.
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

init/do_mounts_rd.c depends upon CONFIG_BLK_DEV_RAM, not CONFIG_BLK_DEV_INITRD.
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

We only need to write an invalid tag every 16 bytes,
so taking advantage of this can save many instructions
compared to the simple memset() call we make now.

A prefetching implementation is implemented for sun4u
and a block-init store version if implemented for Niagara.

The next trick is to be able to perform an init and
a copy_tsb() in parallel when growing a TSB table.
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

online_page() is straightforward, and then add a dummy
remove_memory() that returns -EINVAL just like i386.

There is no point in implementing remove_memory() since
__remove_pages() has no implementation either.
Signed-off-by: NDavid S. Miller <davem@davemloft.net>