The name for a bdi of a gendisk is derived from the gendisk's devt.
However, since the gendisk is destroyed before the bdi it leaves a
window where a new gendisk could dynamically reuse the same devt while a
bdi with the same name is still live.  Arrange for the bdi to hold a
reference against its "owner" disk device while it is registered.
Otherwise we can hit sysfs duplicate name collisions like the following:

 WARNING: CPU: 10 PID: 2078 at fs/sysfs/dir.c:31 sysfs_warn_dup+0x64/0x80
 sysfs: cannot create duplicate filename '/devices/virtual/bdi/259:1'

 Hardware name: HP ProLiant DL580 Gen8, BIOS P79 05/06/2015
  0000000000000286 0000000002c04ad5 ffff88006f24f970 ffffffff8134caec
  ffff88006f24f9c0 0000000000000000 ffff88006f24f9b0 ffffffff8108c351
  0000001f0000000c ffff88105d236000 ffff88105d1031e0 ffff8800357427f8
 Call Trace:
  [<ffffffff8134caec>] dump_stack+0x63/0x87
  [<ffffffff8108c351>] __warn+0xd1/0xf0
  [<ffffffff8108c3cf>] warn_slowpath_fmt+0x5f/0x80
  [<ffffffff812a0d34>] sysfs_warn_dup+0x64/0x80
  [<ffffffff812a0e1e>] sysfs_create_dir_ns+0x7e/0x90
  [<ffffffff8134faaa>] kobject_add_internal+0xaa/0x320
  [<ffffffff81358d4e>] ? vsnprintf+0x34e/0x4d0
  [<ffffffff8134ff55>] kobject_add+0x75/0xd0
  [<ffffffff816e66b2>] ? mutex_lock+0x12/0x2f
  [<ffffffff8148b0a5>] device_add+0x125/0x610
  [<ffffffff8148b788>] device_create_groups_vargs+0xd8/0x100
  [<ffffffff8148b7cc>] device_create_vargs+0x1c/0x20
  [<ffffffff811b775c>] bdi_register+0x8c/0x180
  [<ffffffff811b7877>] bdi_register_dev+0x27/0x30
  [<ffffffff813317f5>] add_disk+0x175/0x4a0

Cc: <stable@vger.kernel.org>
Reported-by: NYi Zhang <yizhan@redhat.com>
Tested-by: NYi Zhang <yizhan@redhat.com>
Signed-off-by: NDan Williams <dan.j.williams@intel.com>

Fixed up missing 0 return in bdi_register_owner().
Signed-off-by: NJens Axboe <axboe@fb.com>

This moves the LRU lists from the zone to the node and related data such
as counters, tracing, congestion tracking and writeback tracking.

Unfortunately, due to reclaim and compaction retry logic, it is
necessary to account for the number of LRU pages on both zone and node
logic.  Most reclaim logic is based on the node counters but the retry
logic uses the zone counters which do not distinguish inactive and
active sizes.  It would be possible to leave the LRU counters on a
per-zone basis but it's a heavier calculation across multiple cache
lines that is much more frequent than the retry checks.

Other than the LRU counters, this is mostly a mechanical patch but note
that it introduces a number of anomalies.  For example, the scans are
per-zone but using per-node counters.  We also mark a node as congested
when a zone is congested.  This causes weird problems that are fixed
later but is easier to review.

In the event that there is excessive overhead on 32-bit systems due to
the nodes being on LRU then there are two potential solutions

1. Long-term isolation of highmem pages when reclaim is lowmem

   When pages are skipped, they are immediately added back onto the LRU
   list. If lowmem reclaim persisted for long periods of time, the same
   highmem pages get continually scanned. The idea would be that lowmem
   keeps those pages on a separate list until a reclaim for highmem pages
   arrives that splices the highmem pages back onto the LRU. It potentially
   could be implemented similar to the UNEVICTABLE list.

   That would reduce the skip rate with the potential corner case is that
   highmem pages have to be scanned and reclaimed to free lowmem slab pages.

2. Linear scan lowmem pages if the initial LRU shrink fails

   This will break LRU ordering but may be preferable and faster during
   memory pressure than skipping LRU pages.

Link: http://lkml.kernel.org/r/1467970510-21195-4-git-send-email-mgorman@techsingularity.netSigned-off-by: NMel Gorman <mgorman@techsingularity.net>
Acked-by: NJohannes Weiner <hannes@cmpxchg.org>
Acked-by: NVlastimil Babka <vbabka@suse.cz>
Cc: Hillf Danton <hillf.zj@alibaba-inc.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Rik van Riel <riel@surriel.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

wait_iff_congested has been used to throttle allocator before it retried
another round of direct reclaim to allow the writeback to make some
progress and prevent reclaim from looping over dirty/writeback pages
without making any progress.

We used to do congestion_wait before commit 0e093d99 ("writeback: do
not sleep on the congestion queue if there are no congested BDIs or if
significant congestion is not being encountered in the current zone")
but that led to undesirable stalls and sleeping for the full timeout
even when the BDI wasn't congested.  Hence wait_iff_congested was used
instead.

But it seems that even wait_iff_congested doesn't work as expected.  We
might have a small file LRU list with all pages dirty/writeback and yet
the bdi is not congested so this is just a cond_resched in the end and
can end up triggering pre mature OOM.

This patch replaces the unconditional wait_iff_congested by
congestion_wait which is executed only if we _know_ that the last round
of direct reclaim didn't make any progress and dirty+writeback pages are
more than a half of the reclaimable pages on the zone which might be
usable for our target allocation.  This shouldn't reintroduce stalls
fixed by 0e093d99 because congestion_wait is called only when we are
getting hopeless when sleeping is a better choice than OOM with many
pages under IO.

We have to preserve logic introduced by commit 373ccbe5 ("mm,
vmstat: allow WQ concurrency to discover memory reclaim doesn't make any
progress") into the __alloc_pages_slowpath now that wait_iff_congested
is not used anymore.  As the only remaining user of wait_iff_congested
is shrink_inactive_list we can remove the WQ specific short sleep from
wait_iff_congested because the sleep is needed to be done only once in
the allocation retry cycle.

[mhocko@suse.com: high_zoneidx->ac_classzone_idx to evaluate memory reserves properly]
 Link: http://lkml.kernel.org/r/1463051677-29418-2-git-send-email-mhocko@kernel.orgSigned-off-by: NMichal Hocko <mhocko@suse.com>
Acked-by: NHillf Danton <hillf.zj@alibaba-inc.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Joonsoo Kim <js1304@gmail.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Cc: Vladimir Davydov <vdavydov@virtuozzo.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The right variable definition should be wb_congested_state that
include WB_async_congested and WB_sync_congested. So fix it.
Signed-off-by: NKaixu Xia <xiakaixu@huawei.com>
Acked-by: NTejun Heo <tj@kernel.org>
Signed-off-by: NJens Axboe <axboe@fb.com>

Most of the mm subsystem uses pr_<level> so make it consistent.

Miscellanea:

 - Realign arguments
 - Add missing newline to format
 - kmemleak-test.c has a "kmemleak: " prefix added to the
   "Kmemleak testing" logging message via pr_fmt
Signed-off-by: NJoe Perches <joe@perches.com>
Acked-by: Tejun Heo <tj@kernel.org>	[percpu]
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

We need to use post-decrement to get percpu_counter_destroy() called on
&wb->stat[0].  Moreover, the pre-decremebt would cause infinite
out-of-bounds accesses if the setup code failed at i==0.
Signed-off-by: NRasmus Villemoes <linux@rasmusvillemoes.dk>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Vladimir Davydov <vdavydov@virtuozzo.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Jan Stancek has reported that system occasionally hanging after "oom01"
testcase from LTP triggers OOM.  Guessing from a result that there is a
kworker thread doing memory allocation and the values between "Node 0
Normal free:" and "Node 0 Normal:" differs when hanging, vmstat is not
up-to-date for some reason.

According to commit 373ccbe5 ("mm, vmstat: allow WQ concurrency to
discover memory reclaim doesn't make any progress"), it meant to force
the kworker thread to take a short sleep, but it by error used
schedule_timeout(1).  We missed that schedule_timeout() in state
TASK_RUNNING doesn't do anything.

Fix it by using schedule_timeout_uninterruptible(1) which forces the
kworker thread to take a short sleep in order to make sure that vmstat
is up-to-date.

Fixes: 373ccbe5 ("mm, vmstat: allow WQ concurrency to discover memory reclaim doesn't make any progress")
Signed-off-by: NTetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Reported-by: NJan Stancek <jstancek@redhat.com>
Acked-by: NMichal Hocko <mhocko@suse.com>
Cc: Tejun Heo <tj@kernel.org>
Cc: Cristopher Lameter <clameter@sgi.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Arkadiusz Miskiewicz <arekm@maven.pl>
Cc: <stable@vger.kernel.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

A later patch will need this symbol in files other than memcontrol.c, so
export it now and replace mem_cgroup_root_css at the same time.
Signed-off-by: NJohannes Weiner <hannes@cmpxchg.org>
Acked-by: NMichal Hocko <mhocko@suse.com>
Acked-by: NDavid S. Miller <davem@davemloft.net>
Reviewed-by: NVladimir Davydov <vdavydov@virtuozzo.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Tetsuo Handa has reported that the system might basically livelock in
OOM condition without triggering the OOM killer.

The issue is caused by internal dependency of the direct reclaim on
vmstat counter updates (via zone_reclaimable) which are performed from
the workqueue context.  If all the current workers get assigned to an
allocation request, though, they will be looping inside the allocator
trying to reclaim memory but zone_reclaimable can see stalled numbers so
it will consider a zone reclaimable even though it has been scanned way
too much.  WQ concurrency logic will not consider this situation as a
congested workqueue because it relies that worker would have to sleep in
such a situation.  This also means that it doesn't try to spawn new
workers or invoke the rescuer thread if the one is assigned to the
queue.

In order to fix this issue we need to do two things.  First we have to
let wq concurrency code know that we are in trouble so we have to do a
short sleep.  In order to prevent from issues handled by 0e093d99
("writeback: do not sleep on the congestion queue if there are no
congested BDIs or if significant congestion is not being encountered in
the current zone") we limit the sleep only to worker threads which are
the ones of the interest anyway.

The second thing to do is to create a dedicated workqueue for vmstat and
mark it WQ_MEM_RECLAIM to note it participates in the reclaim and to
have a spare worker thread for it.
Signed-off-by: NMichal Hocko <mhocko@suse.com>
Reported-by: NTetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Cc: Tejun Heo <tj@kernel.org>
Cc: Cristopher Lameter <clameter@sgi.com>
Cc: Joonsoo Kim <js1304@gmail.com>
Cc: Arkadiusz Miskiewicz <arekm@maven.pl>
Cc: <stable@vger.kernel.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

mm, page_alloc: distinguish between being unable to sleep, unwilling to sleep and avoiding waking kswapd

__GFP_WAIT has been used to identify atomic context in callers that hold
spinlocks or are in interrupts.  They are expected to be high priority and
have access one of two watermarks lower than "min" which can be referred
to as the "atomic reserve".  __GFP_HIGH users get access to the first
lower watermark and can be called the "high priority reserve".

Over time, callers had a requirement to not block when fallback options
were available.  Some have abused __GFP_WAIT leading to a situation where
an optimisitic allocation with a fallback option can access atomic
reserves.

This patch uses __GFP_ATOMIC to identify callers that are truely atomic,
cannot sleep and have no alternative.  High priority users continue to use
__GFP_HIGH.  __GFP_DIRECT_RECLAIM identifies callers that can sleep and
are willing to enter direct reclaim.  __GFP_KSWAPD_RECLAIM to identify
callers that want to wake kswapd for background reclaim.  __GFP_WAIT is
redefined as a caller that is willing to enter direct reclaim and wake
kswapd for background reclaim.

This patch then converts a number of sites

o __GFP_ATOMIC is used by callers that are high priority and have memory
  pools for those requests. GFP_ATOMIC uses this flag.

o Callers that have a limited mempool to guarantee forward progress clear
  __GFP_DIRECT_RECLAIM but keep __GFP_KSWAPD_RECLAIM. bio allocations fall
  into this category where kswapd will still be woken but atomic reserves
  are not used as there is a one-entry mempool to guarantee progress.

o Callers that are checking if they are non-blocking should use the
  helper gfpflags_allow_blocking() where possible. This is because
  checking for __GFP_WAIT as was done historically now can trigger false
  positives. Some exceptions like dm-crypt.c exist where the code intent
  is clearer if __GFP_DIRECT_RECLAIM is used instead of the helper due to
  flag manipulations.

o Callers that built their own GFP flags instead of starting with GFP_KERNEL
  and friends now also need to specify __GFP_KSWAPD_RECLAIM.

The first key hazard to watch out for is callers that removed __GFP_WAIT
and was depending on access to atomic reserves for inconspicuous reasons.
In some cases it may be appropriate for them to use __GFP_HIGH.

The second key hazard is callers that assembled their own combination of
GFP flags instead of starting with something like GFP_KERNEL.  They may
now wish to specify __GFP_KSWAPD_RECLAIM.  It's almost certainly harmless
if it's missed in most cases as other activity will wake kswapd.
Signed-off-by: NMel Gorman <mgorman@techsingularity.net>
Acked-by: NVlastimil Babka <vbabka@suse.cz>
Acked-by: NMichal Hocko <mhocko@suse.com>
Acked-by: NJohannes Weiner <hannes@cmpxchg.org>
Cc: Christoph Lameter <cl@linux.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Vitaly Wool <vitalywool@gmail.com>
Cc: Rik van Riel <riel@redhat.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

a20135ff ("writeback: don't drain bdi_writeback_congested on bdi
destruction") added rbtree_postorder_for_each_entry_safe() which is
used to remove all entries; however, according to Cody, the iterator
isn't safe against operations which may rebalance the tree.  Fix it by
switching to repeatedly removing rb_first() until empty.
Signed-off-by: NTejun Heo <tj@kernel.org>
Reported-by: NCody P Schafer <dev@codyps.com>
Fixes: a20135ff ("writeback: don't drain bdi_writeback_congested on bdi destruction")
Link: http://lkml.kernel.org/g/1443997973-1700-1-git-send-email-dev@codyps.comSigned-off-by: NJens Axboe <axboe@fb.com>

bdi's are initialized in two steps, bdi_init() and bdi_register(), but
destroyed in a single step by bdi_destroy() which, for a bdi embedded
in a request_queue, is called during blk_cleanup_queue() which makes
the queue invisible and starts the draining of remaining usages.

A request_queue's user can access the congestion state of the embedded
bdi as long as it holds a reference to the queue.  As such, it may
access the congested state of a queue which finished
blk_cleanup_queue() but hasn't reached blk_release_queue() yet.
Because the congested state was embedded in backing_dev_info which in
turn is embedded in request_queue, accessing the congested state after
bdi_destroy() was called was fine.  The bdi was destroyed but the
memory region for the congested state remained accessible till the
queue got released.

a13f35e8 ("writeback: don't embed root bdi_writeback_congested in
bdi_writeback") changed the situation.  Now, the root congested state
which is expected to be pinned while request_queue remains accessible
is separately reference counted and the base ref is put during
bdi_destroy().  This means that the root congested state may go away
prematurely while the queue is between bdi_dstroy() and
blk_cleanup_queue(), which was detected by Andrey's KASAN tests.

The root cause of this problem is that bdi doesn't distinguish the two
steps of destruction, unregistration and release, and now the root
congested state actually requires a separate release step.  To fix the
issue, this patch separates out bdi_unregister() and bdi_exit() from
bdi_destroy().  bdi_unregister() is called from blk_cleanup_queue()
and bdi_exit() from blk_release_queue().  bdi_destroy() is now just a
simple wrapper calling the two steps back-to-back.

While at it, the prototype of bdi_destroy() is moved right below
bdi_setup_and_register() so that the counterpart operations are
located together.
Signed-off-by: NTejun Heo <tj@kernel.org>
Fixes: a13f35e8 ("writeback: don't embed root bdi_writeback_congested in bdi_writeback")
Cc: stable@vger.kernel.org # v4.2+
Reported-and-tested-by: NAndrey Konovalov <andreyknvl@google.com>
Link: http://lkml.kernel.org/g/CAAeHK+zUJ74Zn17=rOyxacHU18SgCfC6bsYW=6kCY5GXJBwGfQ@mail.gmail.comReviewed-by: NJan Kara <jack@suse.com>
Reviewed-by: NJeff Moyer <jmoyer@redhat.com>
Signed-off-by: NJens Axboe <axboe@fb.com>

bdi_for_each_wb() is used in several places to wake up or issue
writeback work items to all wb's (bdi_writeback's) on a given bdi.
The iteration is performed by walking bdi->cgwb_tree; however, the
tree only indexes wb's which are currently active.

For example, when a memcg gets associated with a different blkcg, the
old wb is removed from the tree so that the new one can be indexed.
The old wb starts dying from then on but will linger till all its
inodes are drained.  As these dying wb's may still host dirty inodes,
writeback operations which affect all wb's must include them.
bdi_for_each_wb() skipping dying wb's led to sync(2) missing and
failing to sync the inodes belonging to those wb's.

This patch adds a RCU protected @bdi->wb_list which lists all wb's
beloinging to that bdi.  wb's are added on creation and removed on
release rather than on the start of destruction.  bdi_for_each_wb()
usages are replaced with list_for_each[_continue]_rcu() iterations
over @bdi->wb_list and bdi_for_each_wb() and its helpers are removed.

v2: Updated as per Jan.  last_wb ref leak in bdi_split_work_to_wbs()
    fixed and unnecessary list head severing in cgwb_bdi_destroy()
    removed.
Signed-off-by: NTejun Heo <tj@kernel.org>
Reported-and-tested-by: NArtem Bityutskiy <dedekind1@gmail.com>
Fixes: ebe41ab0 ("writeback: implement bdi_for_each_wb()")
Link: http://lkml.kernel.org/g/1443012552.19983.209.camel@gmail.com
Cc: Jan Kara <jack@suse.cz>
Signed-off-by: NJens Axboe <axboe@fb.com>

blkio interface has become messy over time and is currently the
largest.  In addition to the inconsistent naming scheme, it has
multiple stat files which report more or less the same thing, a number
of debug stat files which expose internal details which shouldn't have
been part of the public interface in the first place, recursive and
non-recursive stats and leaf and non-leaf knobs.

Both recursive vs. non-recursive and leaf vs. non-leaf distinctions
don't make any sense on the unified hierarchy as only leaf cgroups can
contain processes.  cgroups is going through a major interface
revision with the unified hierarchy involving significant fundamental
usage changes and given that a significant portion of the interface
doesn't make sense anymore, it's a good time to reorganize the
interface.

As the first step, this patch renames the external visible subsystem
name from "blkio" to "io".  This is more concise, matches the other
two major subsystem names, "cpu" and "memory", and better suited as
blkcg will be involved in anything writeback related too whether an
actual block device is involved or not.

As the subsystem legacy_name is set to "blkio", the only userland
visible change outside the unified hierarchy is that blkcg is reported
as "io" instead of "blkio" in the subsystem initialized message during
boot.  On the unified hierarchy, blkcg now appears as "io".
Signed-off-by: NTejun Heo <tj@kernel.org>
Cc: Li Zefan <lizefan@huawei.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: cgroups@vger.kernel.org
Signed-off-by: NJens Axboe <axboe@fb.com>

There's a small consistency problem between the inode and writeback
naming. Writeback calls the "for IO" inode queues b_io and
b_more_io, but the inode calls these the "writeback list" or
i_wb_list. This makes it hard to an new "under writeback" list to
the inode, or call it an "under IO" list on the bdi because either
way we'll have writeback on IO and IO on writeback and it'll just be
confusing. I'm getting confused just writing this!

So, rename the inode "for IO" list variable to i_io_list so we can
add a new "writeback list" in a subsequent patch.
Signed-off-by: NDave Chinner <dchinner@redhat.com>
Signed-off-by: NJosef Bacik <jbacik@fb.com>
Reviewed-by: NJan Kara <jack@suse.cz>
Reviewed-by: NChristoph Hellwig <hch@lst.de>
Tested-by: NDave Chinner <dchinner@redhat.com>

52ebea74 ("writeback: make backing_dev_info host cgroup-specific
bdi_writebacks") made bdi (backing_dev_info) host per-cgroup wb's
(bdi_writeback's).  As the congested state needs to be per-wb and
referenced from blkcg side and multiple wbs, the patch made all
non-root cong's (bdi_writeback_congested's) reference counted and
indexed on bdi.

When a bdi is destroyed, cgwb_bdi_destroy() tries to drain all
non-root cong's; however, this can hang indefinitely because wb's can
also be referenced from blkcg_gq's which are destroyed after bdi
destruction is complete.

This patch fixes the bug by updating bdi destruction to not wait for
cong's to drain.  A cong is unlinked from bdi->cgwb_congested_tree on
bdi destuction regardless of its reference count as the bdi may go
away any point after destruction.  wb_congested_put() checks whether
the cong is already unlinked on release.
Signed-off-by: NTejun Heo <tj@kernel.org>
Reported-by: NJon Christopherson <jon@jons.org>
Link: https://bugzilla.kernel.org/show_bug.cgi?id=100681
Fixes: 52ebea74 ("writeback: make backing_dev_info host cgroup-specific bdi_writebacks")
Tested-by: NJon Christopherson <jon@jons.org>
Signed-off-by: NJens Axboe <axboe@fb.com>

52ebea74 ("writeback: make backing_dev_info host cgroup-specific
bdi_writebacks") made bdi (backing_dev_info) host per-cgroup wb's
(bdi_writeback's).  As the congested state needs to be per-wb and
referenced from blkcg side and multiple wbs, the patch made all
non-root cong's (bdi_writeback_congested's) reference counted and
indexed on bdi.

When a bdi is destroyed, cgwb_bdi_destroy() tries to drain all
non-root cong's; however, this can hang indefinitely because wb's can
also be referenced from blkcg_gq's which are destroyed after bdi
destruction is complete.

To fix the bug, bdi destruction will be updated to not wait for cong's
to drain, which naturally means that cong's may outlive the associated
bdi.  This is fine for non-root cong's but is problematic for the root
cong's which are embedded in their bdi's as they may end up getting
dereferenced after the containing bdi's are freed.

This patch makes root cong's behave the same as non-root cong's.  They
are no longer embedded in their bdi's but allocated separately during
bdi initialization, indexed and reference counted the same way.

* As cong handling is the same for all wb's, wb->congested
  initialization is moved into wb_init().

* When !CONFIG_CGROUP_WRITEBACK, there was no indexing or refcnting.
  bdi->wb_congested is now a pointer pointing to the root cong
  allocated during bdi init and minimal refcnting operations are
  implemented.

* The above makes root wb init paths diverge depending on
  CONFIG_CGROUP_WRITEBACK.  root wb init is moved to cgwb_bdi_init().

This patch in itself shouldn't cause any consequential behavior
differences but prepares for the actual fix.
Signed-off-by: NTejun Heo <tj@kernel.org>
Reported-by: NJon Christopherson <jon@jons.org>
Link: https://bugzilla.kernel.org/show_bug.cgi?id=100681Tested-by: NJon Christopherson <jon@jons.org>

Added <linux/slab.h> include to backing-dev.h for kfree() definition.
Signed-off-by: NJens Axboe <axboe@fb.com>

On wb_congested_get_create() failure, cgwb_create() forgot to set @ret
to -ENOMEM ending up returning 0.  Fix it so that it returns -ENOMEM.
Signed-off-by: NTejun Heo <tj@kernel.org>
Reported-by: NDan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: NJens Axboe <axboe@fb.com>

Currently, majority of cgroup writeback support including all the
above functions are implemented in include/linux/backing-dev.h and
mm/backing-dev.c; however, the portion closely related to writeback
logic implemented in include/linux/writeback.h and mm/page-writeback.c
will expand to support foreign writeback detection and correction.

This patch moves wb[_try]_get() and wb_put() to
include/linux/backing-dev-defs.h so that they can be used from
writeback.h and inode_{attach|detach}_wb() to writeback.h and
page-writeback.c.

This is pure reorganization and doesn't introduce any functional
changes.
Signed-off-by: NTejun Heo <tj@kernel.org>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Jan Kara <jack@suse.cz>
Cc: Wu Fengguang <fengguang.wu@intel.com>
Cc: Greg Thelen <gthelen@google.com>
Signed-off-by: NJens Axboe <axboe@fb.com>

Dirtyable memory is distributed to a wb (bdi_writeback) according to
the relative bandwidth the wb is writing out in the whole system.
This distribution is global - each wb is measured against all other
wb's and gets the proportinately sized portion of the memory in the
whole system.

For cgroup writeback, the amount of dirtyable memory is scoped by
memcg and thus each wb would need to be measured and controlled in its
memcg.  IOW, a wb will belong to two writeback domains - the global
and memcg domains.

The previous patches laid the groundwork to support the two wb_domains
and this patch implements memcg wb_domain.  memcg->cgwb_domain is
initialized on css online and destroyed on css release,
wb->memcg_completions is added, and __wb_writeout_inc() is updated to
increment completions against both global and memcg wb_domains.

The following patches will update balance_dirty_pages() and its
subroutines to actually consider memcg wb_domain for throttling.
Signed-off-by: NTejun Heo <tj@kernel.org>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Jan Kara <jack@suse.cz>
Cc: Wu Fengguang <fengguang.wu@intel.com>
Cc: Greg Thelen <gthelen@google.com>
Signed-off-by: NJens Axboe <axboe@fb.com>

The function name wb_dirty_limit(), its argument @dirty and the local
variable @wb_dirty are mortally confusing given that the function
calculates per-wb threshold value not dirty pages, especially given
that @dirty and @wb_dirty are used elsewhere for dirty pages.

Let's rename the function to wb_calc_thresh() and wb_dirty to
wb_thresh.
Signed-off-by: NTejun Heo <tj@kernel.org>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Jan Kara <jack@suse.cz>
Cc: Wu Fengguang <fengguang.wu@intel.com>
Cc: Greg Thelen <gthelen@google.com>
Signed-off-by: NJens Axboe <axboe@fb.com>

If the completion of a wb_writeback_work can be waited upon by setting
its ->done to a struct completion and waiting on it; however, for
cgroup writeback support, it's necessary to issue multiple work items
to multiple bdi_writebacks and wait for the completion of all.

This patch implements wb_completion which can wait for multiple work
items and replaces the struct completion with it.  It can be defined
using DEFINE_WB_COMPLETION_ONSTACK(), used for multiple work items and
waited for by wb_wait_for_completion().

Nobody currently issues multiple work items and this patch doesn't
introduce any behavior changes.
Signed-off-by: NTejun Heo <tj@kernel.org>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Jan Kara <jack@suse.cz>
Signed-off-by: NJens Axboe <axboe@fb.com>

bdi_has_dirty_io() used to only reflect whether the root wb
(bdi_writeback) has dirty inodes.  For cgroup writeback support, it
needs to take all active wb's into account.  If any wb on the bdi has
dirty inodes, bdi_has_dirty_io() should return true.

To achieve that, as inode_wb_list_{move|del}_locked() now keep track
of the dirty state transition of each wb, the number of dirty wbs can
be counted in the bdi; however, bdi is already aggregating
wb->avg_write_bandwidth which can easily be guaranteed to be > 0 when
there are any dirty inodes by ensuring wb->avg_write_bandwidth can't
dip below 1.  bdi_has_dirty_io() can simply test whether
bdi->tot_write_bandwidth is zero or not.

While this bumps the value of wb->avg_write_bandwidth to one when it
used to be zero, this shouldn't cause any meaningful behavior
difference.

bdi_has_dirty_io() is made an inline function which tests whether
->tot_write_bandwidth is non-zero.  Also, WARN_ON_ONCE()'s on its
value are added to inode_wb_list_{move|del}_locked().
Signed-off-by: NTejun Heo <tj@kernel.org>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Jan Kara <jack@suse.cz>
Signed-off-by: NJens Axboe <axboe@fb.com>

Currently, wb_has_dirty_io() determines whether a wb (bdi_writeback)
has any dirty inode by testing all three IO lists on each invocation
without actively keeping track.  For cgroup writeback support, a
single bdi will host multiple wb's each of which will host dirty
inodes separately and we'll need to make bdi_has_dirty_io(), which
currently only represents the root wb, aggregate has_dirty_io from all
member wb's, which requires tracking transitions in has_dirty_io state
on each wb.

This patch introduces inode_wb_list_{move|del}_locked() to consolidate
IO list operations leaving queue_io() the only other function which
directly manipulates IO lists (via move_expired_inodes()).  All three
functions are updated to call wb_io_lists_[de]populated() which keep
track of whether the wb has dirty inodes or not and record it using
the new WB_has_dirty_io flag.  inode_wb_list_moved_locked()'s return
value indicates whether the wb had no dirty inodes before.

mark_inode_dirty() is restructured so that the return value of
inode_wb_list_move_locked() can be used for deciding whether to wake
up the wb.

While at it, change {bdi|wb}_has_dirty_io()'s return values to bool.
These functions were returning 0 and 1 before.  Also, add a comment
explaining the synchronization of wb_state flags.

v2: Updated to accommodate b_dirty_time.
Signed-off-by: NTejun Heo <tj@kernel.org>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Jan Kara <jack@suse.cz>
Signed-off-by: NJens Axboe <axboe@fb.com>

Currently, all congestion functions take bdi (backing_dev_info) and
always operate on the root wb (bdi->wb) and the congestion state from
the block layer is propagated only for the root blkcg.  This patch
introduces {set|clear}_wb_congested() and wb_congested() which take a
bdi_writeback_congested and bdi_writeback respectively.  The bdi
counteparts are now wrappers invoking the wb based functions on
@bdi->wb.

While converting clear_bdi_congested() to clear_wb_congested(), the
local variable declaration order between @wqh and @bit is swapped for
cosmetic reason.

This patch just adds the new wb based functions.  The following
patches will apply them.

v2: Updated for bdi_writeback_congested.
Signed-off-by: NTejun Heo <tj@kernel.org>
Reviewed-by: NJan Kara <jack@suse.cz>
Cc: Jens Axboe <axboe@kernel.dk>
Signed-off-by: NJens Axboe <axboe@fb.com>

For the planned cgroup writeback support, on each bdi
(backing_dev_info), each memcg will be served by a separate wb
(bdi_writeback).  This patch updates bdi so that a bdi can host
multiple wbs (bdi_writebacks).

On the default hierarchy, blkcg implicitly enables memcg.  This allows
using memcg's page ownership for attributing writeback IOs, and every
memcg - blkcg combination can be served by its own wb by assigning a
dedicated wb to each memcg.  This means that there may be multiple
wb's of a bdi mapped to the same blkcg.  As congested state is per
blkcg - bdi combination, those wb's should share the same congested
state.  This is achieved by tracking congested state via
bdi_writeback_congested structs which are keyed by blkcg.

bdi->wb remains unchanged and will keep serving the root cgroup.
cgwb's (cgroup wb's) for non-root cgroups are created on-demand or
looked up while dirtying an inode according to the memcg of the page
being dirtied or current task.  Each cgwb is indexed on bdi->cgwb_tree
by its memcg id.  Once an inode is associated with its wb, it can be
retrieved using inode_to_wb().

Currently, none of the filesystems has FS_CGROUP_WRITEBACK and all
pages will keep being associated with bdi->wb.

v3: inode_attach_wb() in account_page_dirtied() moved inside
    mapping_cap_account_dirty() block where it's known to be !NULL.
    Also, an unnecessary NULL check before kfree() removed.  Both
    detected by the kbuild bot.

v2: Updated so that wb association is per inode and wb is per memcg
    rather than blkcg.
Signed-off-by: NTejun Heo <tj@kernel.org>
Cc: kbuild test robot <fengguang.wu@intel.com>
Cc: Dan Carpenter <dan.carpenter@oracle.com>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Jan Kara <jack@suse.cz>
Signed-off-by: NJens Axboe <axboe@fb.com>

Currently, a wb's (bdi_writeback) congestion state is carried in its
->state field; however, cgroup writeback support will require multiple
wb's sharing the same congestion state.  This patch separates out
congestion state into its own struct - struct bdi_writeback_congested.
A new field wb field, wb_congested, points to its associated congested
struct.  The default wb, bdi->wb, always points to bdi->wb_congested.

While this patch adds a layer of indirection, it doesn't introduce any
behavior changes.
Signed-off-by: NTejun Heo <tj@kernel.org>
Signed-off-by: NJens Axboe <axboe@fb.com>

wb_init() currently always uses GFP_KERNEL but the planned cgroup
writeback support needs using other allocation masks.  Add @gfp to
wb_init().

This patch doesn't introduce any behavior changes.
Signed-off-by: NTejun Heo <tj@kernel.org>
Reviewed-by: NJan Kara <jack@suse.cz>
Cc: Jens Axboe <axboe@kernel.dk>
Signed-off-by: NJens Axboe <axboe@fb.com>

Now that bdi definitions are moved to backing-dev-defs.h,
backing-dev.h can include blkdev.h and inline inode_to_bdi() without
worrying about introducing circular include dependency.  The function
gets called from hot paths and fairly trivial.

This patch makes inode_to_bdi() and sb_is_blkdev_sb() that the
function calls inline.  blockdev_superblock and noop_backing_dev_info
are EXPORT_GPL'd to allow the inline functions to be used from
modules.

While at it, make sb_is_blkdev_sb() return bool instead of int.

v2: Fixed typo in description as suggested by Jan.
Signed-off-by: NTejun Heo <tj@kernel.org>
Reviewed-by: NJens Axboe <axboe@kernel.dk>
Cc: Christoph Hellwig <hch@infradead.org>
Signed-off-by: NJens Axboe <axboe@fb.com>

Move wb_shutdown(), bdi_register(), bdi_register_dev(),
bdi_prune_sb(), bdi_remove_from_list() and bdi_unregister() so that
init / exit functions are grouped together.  This will make updating
init / exit paths for cgroup writeback support easier.

This is pure source file reorganization.
Signed-off-by: NTejun Heo <tj@kernel.org>
Reviewed-by: NJan Kara <jack@suse.cz>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Wu Fengguang <fengguang.wu@intel.com>
Signed-off-by: NJens Axboe <axboe@fb.com>

Currently, a bdi (backing_dev_info) embeds single wb (bdi_writeback)
and the role of the separation is unclear.  For cgroup support for
writeback IOs, a bdi will be updated to host multiple wb's where each
wb serves writeback IOs of a different cgroup on the bdi.  To achieve
that, a wb should carry all states necessary for servicing writeback
IOs for a cgroup independently.

This patch moves bdi->wb_lock and ->worklist into wb.

* The lock protects bdi->worklist and bdi->wb.dwork scheduling.  While
  moving, rename it to wb->work_lock as wb->wb_lock is confusing.
  Also, move wb->dwork downwards so that it's colocated with the new
  ->work_lock and ->work_list fields.

* bdi_writeback_workfn()		-> wb_workfn()
  bdi_wakeup_thread_delayed(bdi)	-> wb_wakeup_delayed(wb)
  bdi_wakeup_thread(bdi)		-> wb_wakeup(wb)
  bdi_queue_work(bdi, ...)		-> wb_queue_work(wb, ...)
  __bdi_start_writeback(bdi, ...)	-> __wb_start_writeback(wb, ...)
  get_next_work_item(bdi)		-> get_next_work_item(wb)

* bdi_wb_shutdown() is renamed to wb_shutdown() and now takes @wb.
  The function contained parts which belong to the containing bdi
  rather than the wb itself - testing cap_writeback_dirty and
  bdi_remove_from_list() invocation.  Those are moved to
  bdi_unregister().

* bdi_wb_{init|exit}() are renamed to wb_{init|exit}().
  Initializations of the moved bdi->wb_lock and ->work_list are
  relocated from bdi_init() to wb_init().

* As there's still only one bdi_writeback per backing_dev_info, all
  uses of bdi->state are mechanically replaced with bdi->wb.state
  introducing no behavior changes.
Signed-off-by: NTejun Heo <tj@kernel.org>
Reviewed-by: NJan Kara <jack@suse.cz>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Wu Fengguang <fengguang.wu@intel.com>
Signed-off-by: NJens Axboe <axboe@fb.com>

Currently, a bdi (backing_dev_info) embeds single wb (bdi_writeback)
and the role of the separation is unclear.  For cgroup support for
writeback IOs, a bdi will be updated to host multiple wb's where each
wb serves writeback IOs of a different cgroup on the bdi.  To achieve
that, a wb should carry all states necessary for servicing writeback
IOs for a cgroup independently.

This patch moves bandwidth related fields from backing_dev_info into
bdi_writeback.

* The moved fields are: bw_time_stamp, dirtied_stamp, written_stamp,
  write_bandwidth, avg_write_bandwidth, dirty_ratelimit,
  balanced_dirty_ratelimit, completions and dirty_exceeded.

* writeback_chunk_size() and over_bground_thresh() now take @wb
  instead of @bdi.

* bdi_writeout_fraction(bdi, ...)	-> wb_writeout_fraction(wb, ...)
  bdi_dirty_limit(bdi, ...)		-> wb_dirty_limit(wb, ...)
  bdi_position_ration(bdi, ...)		-> wb_position_ratio(wb, ...)
  bdi_update_writebandwidth(bdi, ...)	-> wb_update_write_bandwidth(wb, ...)
  [__]bdi_update_bandwidth(bdi, ...)	-> [__]wb_update_bandwidth(wb, ...)
  bdi_{max|min}_pause(bdi, ...)		-> wb_{max|min}_pause(wb, ...)
  bdi_dirty_limits(bdi, ...)		-> wb_dirty_limits(wb, ...)

* Init/exits of the relocated fields are moved to bdi_wb_init/exit()
  respectively.  Note that explicit zeroing is dropped in the process
  as wb's are cleared in entirety anyway.

* As there's still only one bdi_writeback per backing_dev_info, all
  uses of bdi->stat[] are mechanically replaced with bdi->wb.stat[]
  introducing no behavior changes.

v2: Typo in description fixed as suggested by Jan.
Signed-off-by: NTejun Heo <tj@kernel.org>
Reviewed-by: NJan Kara <jack@suse.cz>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Wu Fengguang <fengguang.wu@intel.com>
Cc: Jaegeuk Kim <jaegeuk@kernel.org>
Cc: Steven Whitehouse <swhiteho@redhat.com>
Signed-off-by: NJens Axboe <axboe@fb.com>

Currently, a bdi (backing_dev_info) embeds single wb (bdi_writeback)
and the role of the separation is unclear.  For cgroup support for
writeback IOs, a bdi will be updated to host multiple wb's where each
wb serves writeback IOs of a different cgroup on the bdi.  To achieve
that, a wb should carry all states necessary for servicing writeback
IOs for a cgroup independently.

This patch moves bdi->bdi_stat[] into wb.

* enum bdi_stat_item is renamed to wb_stat_item and the prefix of all
  enums is changed from BDI_ to WB_.

* BDI_STAT_BATCH() -> WB_STAT_BATCH()

* [__]{add|inc|dec|sum}_wb_stat(bdi, ...) -> [__]{add|inc}_wb_stat(wb, ...)

* bdi_stat[_error]() -> wb_stat[_error]()

* bdi_writeout_inc() -> wb_writeout_inc()

* stat init is moved to bdi_wb_init() and bdi_wb_exit() is added and
  frees stat.

* As there's still only one bdi_writeback per backing_dev_info, all
  uses of bdi->stat[] are mechanically replaced with bdi->wb.stat[]
  introducing no behavior changes.
Signed-off-by: NTejun Heo <tj@kernel.org>
Reviewed-by: NJan Kara <jack@suse.cz>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Wu Fengguang <fengguang.wu@intel.com>
Cc: Miklos Szeredi <miklos@szeredi.hu>
Cc: Trond Myklebust <trond.myklebust@primarydata.com>
Signed-off-by: NJens Axboe <axboe@fb.com>

Currently, a bdi (backing_dev_info) embeds single wb (bdi_writeback)
and the role of the separation is unclear.  For cgroup support for
writeback IOs, a bdi will be updated to host multiple wb's where each
wb serves writeback IOs of a different cgroup on the bdi.  To achieve
that, a wb should carry all states necessary for servicing writeback
IOs for a cgroup independently.

This patch moves bdi->state into wb.

* enum bdi_state is renamed to wb_state and the prefix of all enums is
  changed from BDI_ to WB_.

* Explicit zeroing of bdi->state is removed without adding zeoring of
  wb->state as the whole data structure is zeroed on init anyway.

* As there's still only one bdi_writeback per backing_dev_info, all
  uses of bdi->state are mechanically replaced with bdi->wb.state
  introducing no behavior changes.
Signed-off-by: NTejun Heo <tj@kernel.org>
Reviewed-by: NJan Kara <jack@suse.cz>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Wu Fengguang <fengguang.wu@intel.com>
Cc: drbd-dev@lists.linbit.com
Cc: Neil Brown <neilb@suse.de>
Cc: Alasdair Kergon <agk@redhat.com>
Cc: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: NJens Axboe <axboe@fb.com>

bdi_unregister() now contains very little functionality.

It contains a "WARN_ON" if bdi->dev is NULL.  This warning is of no
real consequence as bdi->dev isn't needed by anything else in the function,
and it triggers if
   blk_cleanup_queue() -> bdi_destroy()
is called before bdi_unregister, which happens since
  Commit: 6cd18e71 ("block: destroy bdi before blockdev is unregistered.")

So this isn't wanted.

It also calls bdi_set_min_ratio().  This needs to be called after
writes through the bdi have all been flushed, and before the bdi is destroyed.
Calling it early is better than calling it late as it frees up a global
resource.

Calling it immediately after bdi_wb_shutdown() in bdi_destroy()
perfectly fits these requirements.

So bdi_unregister() can be discarded with the important content moved to
bdi_destroy(), as can the
  writeback_bdi_unregister
event which is already not used.
Reported-by: NMike Snitzer <snitzer@redhat.com>
Cc: stable@vger.kernel.org (v4.0)
Fixes: c4db59d3 ("fs: don't reassign dirty inodes to default_backing_dev_info")
Fixes: 6cd18e71 ("block: destroy bdi before blockdev is unregistered.")
Acked-by: NPeter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: NDan Williams <dan.j.williams@intel.com>
Tested-by: NNicholas Moulin <nicholas.w.moulin@linux.intel.com>
Signed-off-by: NNeilBrown <neilb@suse.de>
Reviewed-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NJens Axboe <axboe@fb.com>

Add a new mount option which enables a new "lazytime" mode.  This mode
causes atime, mtime, and ctime updates to only be made to the
in-memory version of the inode.  The on-disk times will only get
updated when (a) if the inode needs to be updated for some non-time
related change, (b) if userspace calls fsync(), syncfs() or sync(), or
(c) just before an undeleted inode is evicted from memory.

This is OK according to POSIX because there are no guarantees after a
crash unless userspace explicitly requests via a fsync(2) call.

For workloads which feature a large number of random write to a
preallocated file, the lazytime mount option significantly reduces
writes to the inode table.  The repeated 4k writes to a single block
will result in undesirable stress on flash devices and SMR disk
drives.  Even on conventional HDD's, the repeated writes to the inode
table block will trigger Adjacent Track Interference (ATI) remediation
latencies, which very negatively impact long tail latencies --- which
is a very big deal for web serving tiers (for example).

Google-Bug-Id: 18297052
Signed-off-by: NTheodore Ts'o <tytso@mit.edu>
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

Now that default_backing_dev_info is not used for writeback purposes we can
git rid of it easily:

 - instead of using it's name for tracing unregistered bdi we just use
   "unknown"
 - btrfs and ceph can just assign the default read ahead window themselves
   like several other filesystems already do.
 - we can assign noop_backing_dev_info as the default one in alloc_super.
   All filesystems already either assigned their own or
   noop_backing_dev_info.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Reviewed-by: NTejun Heo <tj@kernel.org>
Reviewed-by: NJan Kara <jack@suse.cz>
Signed-off-by: NJens Axboe <axboe@fb.com>

If we have dirty inodes we need to call the filesystem for it, even if the
device has been removed and the filesystem will error out early.  The
current code does that by reassining all dirty inodes to the default
backing_dev_info when a bdi is unlinked, but that's pretty pointless given
that the bdi must always outlive the super block.

Instead of stopping writeback at unregister time and moving inodes to the
default bdi just keep the current bdi alive until it is destroyed.  The
containing objects of the bdi ensure this doesn't happen until all
writeback has finished by erroring out.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Reviewed-by: NTejun Heo <tj@kernel.org>
Reviewed-by: NJan Kara <jack@suse.cz>

Killed the redundant WARN_ON(), as noticed by Jan.
Signed-off-by: NJens Axboe <axboe@fb.com>

Now that we never use the backing_dev_info pointer in struct address_space
we can simply remove it and save 4 to 8 bytes in every inode.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Acked-by: NRyusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
Reviewed-by: NTejun Heo <tj@kernel.org>
Reviewed-by: NJan Kara <jack@suse.cz>
Signed-off-by: NJens Axboe <axboe@fb.com>

Since "BDI: Provide backing device capability information [try #3]" the
backing_dev_info structure also provides flags for the kind of mmap
operation available in a nommu environment, which is entirely unrelated
to it's original purpose.

Introduce a new nommu-only file operation to provide this information to
the nommu mmap code instead.  Splitting this from the backing_dev_info
structure allows to remove lots of backing_dev_info instance that aren't
otherwise needed, and entirely gets rid of the concept of providing a
backing_dev_info for a character device.  It also removes the need for
the mtd_inodefs filesystem.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Reviewed-by: NTejun Heo <tj@kernel.org>
Acked-by: NBrian Norris <computersforpeace@gmail.com>
Signed-off-by: NJens Axboe <axboe@fb.com>