- 25 7月, 2016 2 次提交
-
-
由 Trond Myklebust 提交于
Ensure that we don't carry over layoutreturn info from a previous incarnation of this layout. Signed-off-by: NTrond Myklebust <trond.myklebust@primarydata.com>
-
由 Trond Myklebust 提交于
If the layout was completely returned, then ignore the returned layout stateid. Signed-off-by: NTrond Myklebust <trond.myklebust@primarydata.com>
-
- 23 7月, 2016 1 次提交
-
-
由 Artem Savkov 提交于
When bl_parse_deviceid() fails in bl_alloc_deviceid_node() on blkdev_get_by_*() step we get an pnfs_block_dev struct that is uninitialized except for bdev field which is set to whatever error blkdev_get_by_*() returns. bl_free_device() then tries to call blkdev_put() if bdev is not 0 resulting in a wrong pointer dereference. Fixing this by setting bdev in struct pnfs_block_dev only if we didn't get an error from blkdev_get_by_*(). Signed-off-by: NArtem Savkov <asavkov@redhat.com> Reviewed-by: NBenjamin Coddington <bcodding@redhat.com> Signed-off-by: NTrond Myklebust <trond.myklebust@primarydata.com>
-
- 16 7月, 2016 5 次提交
-
-
由 Kinglong Mee 提交于
Avoid nfs return uuids/devices larger than maximum. Signed-off-by: NKinglong Mee <kinglongmee@gmail.com> Signed-off-by: NTrond Myklebust <trond.myklebust@primarydata.com>
-
由 Kinglong Mee 提交于
Avoid a bad nfs server return an unaligned length of signature. Signed-off-by: NKinglong Mee <kinglongmee@gmail.com> Signed-off-by: NTrond Myklebust <trond.myklebust@primarydata.com>
-
由 Christoph Hellwig 提交于
Instead of reusing the wwn-* names for multipath devices nodes RHEL and Fedora introduce new dm-mpath-uuid-* nodes with a slightly different naming scheme. Try these names first to ensure we always get a multipath-capable device if it exists. Signed-off-by: NChristoph Hellwig <hch@lst.de> Signed-off-by: NTrond Myklebust <trond.myklebust@primarydata.com>
-
由 Christoph Hellwig 提交于
The current code works with the standard udev/systemd names, but we'll have to add another method in the next patch. Refactor it into a separate helper to make room for the new variant. Signed-off-by: NChristoph Hellwig <hch@lst.de> Signed-off-by: NTrond Myklebust <trond.myklebust@primarydata.com>
-
由 Christoph Hellwig 提交于
This was fixed for the original block layout code a while ago, but also needs to be fixed for the SCSI layout path. Signed-off-by: NChristoph Hellwig <hch@lst.de> Signed-off-by: NTrond Myklebust <trond.myklebust@primarydata.com>
-
- 29 6月, 2016 1 次提交
-
-
由 Trond Myklebust 提交于
Olga Kornievskaia reports that the following test fails to trigger an OPEN_DOWNGRADE on the wire, and only triggers the final CLOSE. fd0 = open(foo, RDRW) -- should be open on the wire for "both" fd1 = open(foo, RDONLY) -- should be open on the wire for "read" close(fd0) -- should trigger an open_downgrade read(fd1) close(fd1) The issue is that we're missing a check for whether or not the current state transitioned from an O_RDWR state as opposed to having transitioned from a combination of O_RDONLY and O_WRONLY. Reported-by: NOlga Kornievskaia <aglo@umich.edu> Fixes: cd9288ff ("NFSv4: Fix another bug in the close/open_downgrade code") Cc: stable@vger.kernel.org # 2.6.33+ Signed-off-by: NTrond Myklebust <trond.myklebust@primarydata.com> Signed-off-by: NAnna Schumaker <Anna.Schumaker@Netapp.com>
-
- 27 6月, 2016 1 次提交
-
-
由 Al Viro 提交于
In "NFSv4: Move dentry instantiation into the NFSv4-specific atomic open code" unconditional d_drop() after the ->open_context() had been removed. It had been correct for success cases (there ->open_context() itself had been doing dcache manipulations), but not for error ones. Only one of those (ENOENT) got a compensatory d_drop() added in that commit, but in fact it should've been done for all errors. As it is, the case of O_CREAT non-exclusive open on a hashed negative dentry racing with e.g. symlink creation from another client ended up with ->open_context() getting an error and proceeding to call nfs_lookup(). On a hashed dentry, which would've instantly triggered BUG_ON() in d_materialise_unique() (or, these days, its equivalent in d_splice_alias()). Cc: stable@vger.kernel.org # v3.10+ Tested-by: NOleg Drokin <green@linuxhacker.ru> Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk> Signed-off-by: NTrond Myklebust <trond.myklebust@primarydata.com> Signed-off-by: NAnna Schumaker <Anna.Schumaker@Netapp.com>
-
- 25 6月, 2016 12 次提交
-
-
由 Trond Myklebust 提交于
Signed-off-by: NTrond Myklebust <trond.myklebust@primarydata.com> Signed-off-by: NAnna Schumaker <Anna.Schumaker@Netapp.com>
-
由 Trond Myklebust 提交于
If we don't set the mode correctly in nfs_init_locked(), then there is potential for a race with a second call to nfs_fhget that will cause inode aliasing. Signed-off-by: NTrond Myklebust <trond.myklebust@primarydata.com> Reviewed-by: NJeff Layton <jlayton@redhat.com> Signed-off-by: NAnna Schumaker <Anna.Schumaker@Netapp.com>
-
由 Trond Myklebust 提交于
Signed-off-by: NTrond Myklebust <trond.myklebust@primarydata.com> Signed-off-by: NAnna Schumaker <Anna.Schumaker@Netapp.com>
-
由 Trond Myklebust 提交于
According to RFC5661, section 12.5.3. the layout stateid is no longer valid once the client no longer holds any layout segments. Ensure that we mark it invalid. Signed-off-by: NTrond Myklebust <trond.myklebust@primarydata.com> Signed-off-by: NAnna Schumaker <Anna.Schumaker@Netapp.com>
-
由 Trond Myklebust 提交于
Since commit 0bcbf039, nfs_readpage_release() has been used to unlock the page in the read code. Fixes: 0bcbf039 ("nfs: handle request add failure properly") Cc: stable@vger.kernel.org # v4.5+ Signed-off-by: NTrond Myklebust <trond.myklebust@primarydata.com> Signed-off-by: NAnna Schumaker <Anna.Schumaker@Netapp.com>
-
由 Weston Andros Adamson 提交于
pnfs_generic_commit_cancel_empty_pagelist calls nfs_commitdata_release, but that is wrong: nfs_commitdata_release puts the open context, something that isn't valid until nfs_init_commit is called, which is never the case when pnfs_generic_commit_cancel_empty_pagelist is called. This was introduced in "nfs: avoid race that crashes nfs_init_commit". Signed-off-by: NWeston Andros Adamson <dros@primarydata.com> Cc: stable@vger.kernel.org Signed-off-by: NTrond Myklebust <trond.myklebust@primarydata.com> Signed-off-by: NAnna Schumaker <Anna.Schumaker@Netapp.com>
-
由 Oleg Drokin 提交于
Commit e8d975e7 ("fixing infinite OPEN loop in 4.0 stateid recovery") introduced access to state after it was just potentially freed by nfs4_put_open_state leading to a random data corruption somewhere. BUG: unable to handle kernel paging request at ffff88004941ee40 IP: [<ffffffff813baf01>] nfs4_do_reclaim+0x461/0x740 PGD 3501067 PUD 3504067 PMD 6ff37067 PTE 800000004941e060 Oops: 0002 [#1] SMP DEBUG_PAGEALLOC Modules linked in: loop rpcsec_gss_krb5 acpi_cpufreq tpm_tis joydev i2c_piix4 pcspkr tpm virtio_console nfsd ttm drm_kms_helper syscopyarea sysfillrect sysimgblt fb_sys_fops floppy serio_raw virtio_blk drm CPU: 6 PID: 2161 Comm: 192.168.10.253- Not tainted 4.7.0-rc1-vm-nfs+ #112 Hardware name: Bochs Bochs, BIOS Bochs 01/01/2011 task: ffff8800463dcd00 ti: ffff88003ff48000 task.ti: ffff88003ff48000 RIP: 0010:[<ffffffff813baf01>] [<ffffffff813baf01>] nfs4_do_reclaim+0x461/0x740 RSP: 0018:ffff88003ff4bd68 EFLAGS: 00010246 RAX: 0000000000000000 RBX: ffffffff81a49900 RCX: 00000000000000e8 RDX: 00000000000000e8 RSI: ffff8800418b9930 RDI: ffff880040c96c88 RBP: ffff88003ff4bdf8 R08: 0000000000000001 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000000 R12: ffff880040c96c98 R13: ffff88004941ee20 R14: ffff88004941ee40 R15: ffff88004941ee00 FS: 0000000000000000(0000) GS:ffff88006d000000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: ffff88004941ee40 CR3: 0000000060b0b000 CR4: 00000000000006e0 Stack: ffffffff813baad5 ffff8800463dcd00 ffff880000000001 ffffffff810e6b68 ffff880043ddbc88 ffff8800418b9800 ffff8800418b98c8 ffff88004941ee48 ffff880040c96c90 ffff880040c96c00 ffff880040c96c20 ffff880040c96c40 Call Trace: [<ffffffff813baad5>] ? nfs4_do_reclaim+0x35/0x740 [<ffffffff810e6b68>] ? trace_hardirqs_on_caller+0x128/0x1b0 [<ffffffff813bb7cd>] nfs4_run_state_manager+0x5ed/0xa40 [<ffffffff813bb1e0>] ? nfs4_do_reclaim+0x740/0x740 [<ffffffff813bb1e0>] ? nfs4_do_reclaim+0x740/0x740 [<ffffffff810af0d1>] kthread+0x101/0x120 [<ffffffff810e6b68>] ? trace_hardirqs_on_caller+0x128/0x1b0 [<ffffffff818843af>] ret_from_fork+0x1f/0x40 [<ffffffff810aefd0>] ? kthread_create_on_node+0x250/0x250 Code: 65 80 4c 8b b5 78 ff ff ff e8 fc 88 4c 00 48 8b 7d 88 e8 13 67 d2 ff 49 8b 47 40 a8 02 0f 84 d3 01 00 00 4c 89 ff e8 7f f9 ff ff <f0> 41 80 26 7f 48 8b 7d c8 e8 b1 84 4c 00 e9 39 fd ff ff 3d e6 RIP [<ffffffff813baf01>] nfs4_do_reclaim+0x461/0x740 RSP <ffff88003ff4bd68> CR2: ffff88004941ee40 Signed-off-by: NOleg Drokin <green@linuxhacker.ru> Signed-off-by: NTrond Myklebust <trond.myklebust@primarydata.com> Signed-off-by: NAnna Schumaker <Anna.Schumaker@Netapp.com>
-
由 Trond Myklebust 提交于
if we read or wrote something, we must report it Signed-off-by: NTrond Myklebust <trond.myklebust@primarydata.com> Reviewed-by: NJeff Layton <jlayton@poochiereds.net> Signed-off-by: NAnna Schumaker <Anna.Schumaker@Netapp.com>
-
由 Trond Myklebust 提交于
We must call nfs4_handle_exception() on BAD_STATEID errors. The only exception is if the stateid argument turns out to be a layout stateid that is declared invalid. Signed-off-by: NTrond Myklebust <trond.myklebust@primarydata.com> Reviewed-by: NJeff Layton <jlayton@poochiereds.net> Signed-off-by: NAnna Schumaker <Anna.Schumaker@Netapp.com>
-
由 Trond Myklebust 提交于
Signed-off-by: NTrond Myklebust <trond.myklebust@primarydata.com> Reviewed-by: NJeff Layton <jlayton@poochiereds.net> Signed-off-by: NAnna Schumaker <Anna.Schumaker@Netapp.com>
-
由 Trond Myklebust 提交于
Signed-off-by: NTrond Myklebust <trond.myklebust@primarydata.com> Reviewed-by: NJeff Layton <jlayton@poochiereds.net> Signed-off-by: NAnna Schumaker <Anna.Schumaker@Netapp.com>
-
由 Trond Myklebust 提交于
nfs4_handle_exception() relies on the caller setting the 'inode' field in the struct nfs4_exception argument when the error applies to a delegation. Signed-off-by: NTrond Myklebust <trond.myklebust@primarydata.com> Reviewed-by: NJeff Layton <jlayton@poochiereds.net> Signed-off-by: NAnna Schumaker <Anna.Schumaker@Netapp.com>
-
- 28 5月, 2016 2 次提交
-
-
由 Linus Torvalds 提交于
Older versions of gcc don't understand named initializers inside a anonymous structure or union member. It can be worked around by adding the bracin gin the initializer for the anonymous member. Without this, gcc 4.4.4 will fail the build with CC fs/nfs/nfs4state.o fs/nfs/nfs4state.c:69: error: unknown field ‘data’ specified in initializer fs/nfs/nfs4state.c:69: warning: missing braces around initializer fs/nfs/nfs4state.c:69: warning: (near initialization for ‘zero_stateid.<anonymous>.data’) make[2]: *** [fs/nfs/nfs4state.o] Error 1 introduced in commit 93b717fd ("NFSv4: Label stateids with the type") Reported-and-tested-by: NBoris Ostrovsky <boris.ostrovsky@oracle.com> Cc: Anna Schumaker <Anna.Schumaker@netapp.com> Cc: Trond Myklebust <trond.myklebust@primarydata.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Al Viro 提交于
preparation for similar switch in ->setxattr() (see the next commit for rationale). Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
- 26 5月, 2016 5 次提交
-
-
由 Tom Haynes 提交于
As flexfiles has FF_FLAGS_NO_READ_IO, there is a need to generically support enforcing that a IOMODE_RW segment will not allow READ I/O. Signed-off-by: NTom Haynes <loghyr@primarydata.com> Signed-off-by: NAnna Schumaker <Anna.Schumaker@Netapp.com>
-
由 Tom Haynes 提交于
Signed-off-by: NTom Haynes <loghyr@primarydata.com> Signed-off-by: NAnna Schumaker <Anna.Schumaker@Netapp.com>
-
由 Tom Haynes 提交于
The mds can inform the client not to use the IOMODE_RW layout segment for doing READs. I.e., it is basically a IOMODE_WRITE layout segment. It would do this to not interfere with the WRITEs. Signed-off-by: NTom Haynes <loghyr@primarydata.com> Signed-off-by: NAnna Schumaker <Anna.Schumaker@Netapp.com>
-
由 Weston Andros Adamson 提交于
Since the patch "NFS: Allow multiple commit requests in flight per file" we can run multiple simultaneous commits on the same inode. This introduced a race over collecting pages to commit that made it possible to call nfs_init_commit() with an empty list - which causes crashes like the one below. The fix is to catch this race and avoid calling nfs_init_commit and initiate_commit when there is no work to do. Here is the crash: [600522.076832] BUG: unable to handle kernel NULL pointer dereference at 0000000000000040 [600522.078475] IP: [<ffffffffa0479e72>] nfs_init_commit+0x22/0x130 [nfs] [600522.078745] PGD 4272b1067 PUD 4272cb067 PMD 0 [600522.078972] Oops: 0000 [#1] SMP [600522.079204] Modules linked in: nfsv3 nfs_layout_flexfiles rpcsec_gss_krb5 nfsv4 dns_resolver nfs fscache dcdbas ip6t_rpfilter ip6t_REJECT nf_reject_ipv6 xt_conntrack ebtable_nat ebtable_broute bridge stp llc ebtable_filter ebtables ip6table_nat nf_conntrack_ipv6 nf_defrag_ipv6 nf_nat_ipv6 ip6table_mangle ip6table_security ip6table_raw ip6table_filter ip6_tables iptable_nat nf_conntrack_ipv4 nf_defrag_ipv4 nf_nat_ipv4 nf_nat nf_conntrack iptable_mangle iptable_security iptable_raw vmw_vsock_vmci_transport vsock bonding ipmi_devintf ipmi_msghandler coretemp crct10dif_pclmul crc32_pclmul ghash_clmulni_intel ppdev vmw_balloon parport_pc parport acpi_cpufreq vmw_vmci i2c_piix4 shpchp nfsd auth_rpcgss nfs_acl lockd grace sunrpc xfs libcrc32c vmwgfx drm_kms_helper ttm drm crc32c_intel serio_raw vmxnet3 [600522.081380] vmw_pvscsi ata_generic pata_acpi [600522.081809] CPU: 3 PID: 15667 Comm: /usr/bin/python Not tainted 4.1.9-100.pd.88.el7.x86_64 #1 [600522.082281] Hardware name: VMware, Inc. VMware Virtual Platform/440BX Desktop Reference Platform, BIOS 6.00 09/30/2014 [600522.082814] task: ffff8800bbbfa780 ti: ffff88042ae84000 task.ti: ffff88042ae84000 [600522.083378] RIP: 0010:[<ffffffffa0479e72>] [<ffffffffa0479e72>] nfs_init_commit+0x22/0x130 [nfs] [600522.083973] RSP: 0018:ffff88042ae87438 EFLAGS: 00010246 [600522.084571] RAX: 0000000000000000 RBX: ffff880003485e40 RCX: ffff88042ae87588 [600522.085188] RDX: 0000000000000000 RSI: ffff88042ae874b0 RDI: ffff880003485e40 [600522.085756] RBP: ffff88042ae87448 R08: ffff880003486010 R09: ffff88042ae874b0 [600522.086332] R10: 0000000000000000 R11: 0000000000000005 R12: ffff88042ae872d0 [600522.086905] R13: ffff88042ae874b0 R14: ffff880003485e40 R15: ffff88042704c840 [600522.087484] FS: 00007f4728ff2740(0000) GS:ffff88043fd80000(0000) knlGS:0000000000000000 [600522.088070] CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b [600522.088663] CR2: 0000000000000040 CR3: 000000042b6aa000 CR4: 00000000001406e0 [600522.089327] Stack: [600522.089926] 0000000000000001 ffff88042ae87588 ffff88042ae874f8 ffffffffa04f09fa [600522.090549] 0000000000017840 0000000000017840 ffff88042ae87588 ffff8803258d9930 [600522.091169] ffff88042ae87578 ffffffffa0563d80 0000000000000000 ffff88042704c840 [600522.091789] Call Trace: [600522.092420] [<ffffffffa04f09fa>] pnfs_generic_commit_pagelist+0x1da/0x320 [nfsv4] [600522.093052] [<ffffffffa0563d80>] ? ff_layout_commit_prepare_v3+0x30/0x30 [nfs_layout_flexfiles] [600522.093696] [<ffffffffa0562645>] ff_layout_commit_pagelist+0x15/0x20 [nfs_layout_flexfiles] [600522.094359] [<ffffffffa047bc78>] nfs_generic_commit_list+0xe8/0x120 [nfs] [600522.095032] [<ffffffffa047bd6a>] nfs_commit_inode+0xba/0x110 [nfs] [600522.095719] [<ffffffffa046ac54>] nfs_release_page+0x44/0xd0 [nfs] [600522.096410] [<ffffffff811a8122>] try_to_release_page+0x32/0x50 [600522.097109] [<ffffffff811bd4f1>] shrink_page_list+0x961/0xb30 [600522.097812] [<ffffffff811bdced>] shrink_inactive_list+0x1cd/0x550 [600522.098530] [<ffffffff811bea65>] shrink_lruvec+0x635/0x840 [600522.099250] [<ffffffff811bed60>] shrink_zone+0xf0/0x2f0 [600522.099974] [<ffffffff811bf312>] do_try_to_free_pages+0x192/0x470 [600522.100709] [<ffffffff811bf6ca>] try_to_free_pages+0xda/0x170 [600522.101464] [<ffffffff811b2198>] __alloc_pages_nodemask+0x588/0x970 [600522.102235] [<ffffffff811fbbd5>] alloc_pages_vma+0xb5/0x230 [600522.103000] [<ffffffff813a1589>] ? cpumask_any_but+0x39/0x50 [600522.103774] [<ffffffff811d6115>] wp_page_copy.isra.55+0x95/0x490 [600522.104558] [<ffffffff810e3438>] ? __wake_up+0x48/0x60 [600522.105357] [<ffffffff811d7d3b>] do_wp_page+0xab/0x4f0 [600522.106137] [<ffffffff810a1bbb>] ? release_task+0x36b/0x470 [600522.106902] [<ffffffff8126dbd7>] ? eventfd_ctx_read+0x67/0x1c0 [600522.107659] [<ffffffff811da2a8>] handle_mm_fault+0xc78/0x1900 [600522.108431] [<ffffffff81067ef1>] __do_page_fault+0x181/0x420 [600522.109173] [<ffffffff811446a6>] ? __audit_syscall_exit+0x1e6/0x280 [600522.109893] [<ffffffff810681c0>] do_page_fault+0x30/0x80 [600522.110594] [<ffffffff81024f36>] ? syscall_trace_leave+0xc6/0x120 [600522.111288] [<ffffffff81790a58>] page_fault+0x28/0x30 [600522.111947] Code: 5d c3 0f 1f 80 00 00 00 00 0f 1f 44 00 00 55 4c 8d 87 d0 01 00 00 48 89 e5 53 48 89 fb 48 83 ec 08 4c 8b 0e 49 8b 41 18 4c 39 ce <48> 8b 40 40 4c 8b 50 30 74 24 48 8b 87 d0 01 00 00 48 8b 7e 08 [600522.113343] RIP [<ffffffffa0479e72>] nfs_init_commit+0x22/0x130 [nfs] [600522.114003] RSP <ffff88042ae87438> [600522.114636] CR2: 0000000000000040 Fixes: af7cf057 (NFS: Allow multiple commit requests in flight per file) CC: stable@vger.kernel.org Signed-off-by: NWeston Andros Adamson <dros@primarydata.com> Signed-off-by: NAnna Schumaker <Anna.Schumaker@Netapp.com>
-
由 Dan Carpenter 提交于
nfs_create_request() doesn't return NULL, it returns error pointers. Fixes: 67911c8f ('NFS: Add nfs_commit_file()') Signed-off-by: NDan Carpenter <dan.carpenter@oracle.com> Signed-off-by: NAnna Schumaker <Anna.Schumaker@Netapp.com>
-
- 18 5月, 2016 11 次提交
-
-
由 Jeff Layton 提交于
It can return NULL if layoutgets are blocked currently. Fix it to return -EAGAIN in that case, so we can properly handle it in pnfs_update_layout. Also, clean up and simplify the error handling -- eliminate "status" and just use "lseg". Signed-off-by: NJeff Layton <jeff.layton@primarydata.com> Signed-off-by: NAnna Schumaker <Anna.Schumaker@Netapp.com>
-
由 Jeff Layton 提交于
There are several problems in the way a stateid is selected for a LAYOUTGET operation: We pick a stateid to use in the RPC prepare op, but that makes it difficult to serialize LAYOUTGETs that use the open stateid. That serialization is done in pnfs_update_layout, which occurs well before the rpc_prepare operation. Between those two events, the i_lock is dropped and reacquired. pnfs_update_layout can find that the list has lsegs in it and not do any serialization, but then later pnfs_choose_layoutget_stateid ends up choosing the open stateid. This patch changes the client to select the stateid to use in the LAYOUTGET earlier, when we're searching for a usable layout segment. This way we can do it all while holding the i_lock the first time, and ensure that we serialize any LAYOUTGET call that uses a non-layout stateid. This also means a rework of how LAYOUTGET replies are handled, as we must now get the latest stateid if we want to retransmit in response to a retryable error. Most of those errors boil down to the fact that the layout state has changed in some fashion. Thus, what we really want to do is to re-search for a layout when it fails with a retryable error, so that we can avoid reissuing the RPC at all if possible. While the LAYOUTGET RPC is async, the initiating thread always waits for it to complete, so it's effectively synchronous anyway. Currently, when we need to retry a LAYOUTGET because of an error, we drive that retry via the rpc state machine. This means that once the call has been submitted, it runs until it completes. So, we must move the error handling for this RPC out of the rpc_call_done operation and into the caller. In order to handle errors like NFS4ERR_DELAY properly, we must also pass a pointer to the sliding timeout, which is now moved to the stack in pnfs_update_layout. The complicating errors are -NFS4ERR_RECALLCONFLICT and -NFS4ERR_LAYOUTTRYLATER, as those involve a timeout after which we give up and return NULL back to the caller. So, there is some special handling for those errors to ensure that the layers driving the retries can handle that appropriately. Signed-off-by: NJeff Layton <jeff.layton@primarydata.com> Signed-off-by: NAnna Schumaker <Anna.Schumaker@Netapp.com>
-
由 Jeff Layton 提交于
If we get back something like NFS4ERR_OLD_STATEID, that will be translated into -EAGAIN, and the do/while loop in send_layoutget will drive the call again. This is not quite what we want, I think. An error like that is a sign that something has changed. That something could have been a concurrent LAYOUTGET that would give us a usable lseg. Lift the retry logic into pnfs_update_layout instead. That allows us to redo the layout search, and may spare us from having to issue an RPC. Signed-off-by: NJeff Layton <jeff.layton@primarydata.com> Signed-off-by: NAnna Schumaker <Anna.Schumaker@Netapp.com>
-
由 Jeff Layton 提交于
Currently, the code will clear the fail bit if we get back a fatal error. I don't think that's correct -- we want to clear that bit if we do not get a fatal error. Fixes: 0bcbf039 (nfs: handle request add failure properly) Signed-off-by: NJeff Layton <jeff.layton@primarydata.com> Signed-off-by: NAnna Schumaker <Anna.Schumaker@Netapp.com>
-
由 Jeff Layton 提交于
Signed-off-by: NJeff Layton <jeff.layton@primarydata.com> Signed-off-by: NAnna Schumaker <Anna.Schumaker@Netapp.com>
-
由 Jeff Layton 提交于
Setting just the NFS_LAYOUT_RETURN_REQUESTED flag doesn't do anything, unless there are lsegs that are also being marked for return. At the point where that happens this flag is also set, so these set_bit calls don't do anything useful. Signed-off-by: NJeff Layton <jeff.layton@primarydata.com> Signed-off-by: NAnna Schumaker <Anna.Schumaker@Netapp.com>
-
由 Jeff Layton 提交于
LAYOUTRETURN is "special" in that servers and clients are expected to work with old stateids. When the client sends a LAYOUTRETURN with an old stateid in it then the server is expected to only tear down layout segments that were present when that seqid was current. Ensure that the client handles its accounting accordingly. Signed-off-by: NJeff Layton <jeff.layton@primarydata.com> Signed-off-by: NAnna Schumaker <Anna.Schumaker@Netapp.com>
-
由 Jeff Layton 提交于
When we want to selectively do a LAYOUTRETURN, we need to specify a stateid that represents most recent layout acquisition that is to be returned. When we mark a layout stateid to be returned, we update the return sequence number in the layout header with that value, if it's newer than the existing one. Then, when we go to do a LAYOUTRETURN on layout header put, we overwrite the seqid in the stateid with the saved one, and then zero it out. Signed-off-by: NJeff Layton <jeff.layton@primarydata.com> Signed-off-by: NAnna Schumaker <Anna.Schumaker@Netapp.com>
-
由 Jeff Layton 提交于
In later patches, we're going to teach the client to be more selective about how it returns layouts. This means keeping a record of what the stateid's seqid was at the time that the server handed out a layout segment. Signed-off-by: NJeff Layton <jeff.layton@primarydata.com> Signed-off-by: NAnna Schumaker <Anna.Schumaker@Netapp.com>
-
由 Jeff Layton 提交于
Otherwise, we'll end up returning layouts that we've just received if the client issues a new LAYOUTGET prior to the LAYOUTRETURN. Signed-off-by: NJeff Layton <jeff.layton@primarydata.com> Signed-off-by: NAnna Schumaker <Anna.Schumaker@Netapp.com>
-
由 Tom Haynes 提交于
If we are initializing reads or writes and can not connect to a DS, then check whether or not IO is allowed through the MDS. If it is allowed, reset to the MDS. Else, fail the layout segment and force a retry of a new layout segment. Signed-off-by: NTom Haynes <loghyr@primarydata.com> Signed-off-by: NAnna Schumaker <Anna.Schumaker@Netapp.com>
-