The device pointer will not be NULL in the PM callback and ACPI driver's
add/remove callback, so checking NULL for them isn't necessary.
Signed-off-by: NAaron Lu <aaron.lu@intel.com>
Signed-off-by: NZhang Rui <rui.zhang@intel.com>

The _COMPONENT, ACPI_MODULE_NAME(name) and ACPI_FAN_FILE_STATE are not
used anywhere so remove them.
Signed-off-by: NAaron Lu <aaron.lu@intel.com>
Signed-off-by: NZhang Rui <rui.zhang@intel.com>

Introduce int3400 thermal driver. And make INT3400 driver
enumerate the other int340x thermal components shown in _ART/_TRT.
Signed-off-by: NZhang Rui <rui.zhang@intel.com>

Add ACPI_TYPE_LOCAL_REFERENCE support to acpi_extract_package(),
so that we can use this helper for more cases like _ART/_TRT.
Signed-off-by: NZhang Rui <rui.zhang@intel.com>

Signed-off-by: NZhang Rui <rui.zhang@intel.com>

Newer laptops and tablets that use ACPI may have thermal sensors and
other devices with thermal control capabilities outside the core CPU/SOC,
for thermal safety reasons.
They are exposed for the OS to use via
1) INT3400 ACPI device object as the master.
2) INT3401 ~ INT340B ACPI device objects as the slaves.

This patch introduces a scan handler to enumerate the INT3400
ACPI device object to platform bus, and prevent its slaves
from being enumerated before the controller driver being probed.
Signed-off-by: NZhang Rui <rui.zhang@intel.com>

capacity_now should be assigned after comparing it to design_capacity.

Otherwise warning is printed even when capacity_now before assignment is
equal to design_capacity, making the check useless and "current charge level"
wrong (it should be higher than, not equal to, "maximum charge level", which
is full_charge_capacity):

"battery: reported current charge level (56410) is higher than reported
maximum charge level (56410)."

Fixes: 232de514 (ACPI / battery: fix wrong value of capacity_now reported when fully charged)
Signed-off-by: NMariusz Ceier <mceier+kernel@gmail.com>
Cc: 3.16+ <stable@vger.kernel.org> # 3.16+
[rjw: Subject]
Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>

Now IOAPIC driver dynamically allocates IRQ numbers for IOAPIC pins.
We need to keep IRQ assignment for PCI devices during suspend/hibernation,
otherwise it may cause failure of suspend/hibernation due to:
1) Device driver calls pci_enable_device() to allocate an IRQ number
   and register interrupt handler on the returned IRQ.
2) Device driver's suspend callback calls pci_disable_device() and
   release assigned IRQ in turn.
3) Device driver's resume callback calls pci_enable_device() to
   allocate IRQ number again. A different IRQ number may be assigned
   by IOAPIC driver this time.
4) Now the hardware delivers interrupt to the new IRQ but interrupt
   handler is still registered against the old IRQ, so it breaks
   suspend/hibernation.

To fix this issue, we keep IRQ assignment during suspend/hibernation.
Flag pci_dev.dev.power.is_prepared is used to detect that
pci_disable_device() is called during suspend/hibernation.
Reported-and-Tested-by: NBorislav Petkov <bp@suse.de>
Signed-off-by: NJiang Liu <jiang.liu@linux.intel.com>
Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Joerg Roedel <joro@8bytes.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Rafael J. Wysocki <rjw@rjwysocki.net>
Cc: Bjorn Helgaas <bhelgaas@google.com>
Cc: Randy Dunlap <rdunlap@infradead.org>
Cc: Yinghai Lu <yinghai@kernel.org>
Cc: Grant Likely <grant.likely@linaro.org>
Cc: Len Brown <lenb@kernel.org>
Link: http://lkml.kernel.org/r/1407478071-29399-1-git-send-email-jiang.liu@linux.intel.comSigned-off-by: NThomas Gleixner <tglx@linutronix.de>

When ACPI_HOTPLUG_MEMORY is not configured, memory_device_handler.attach
is not set.  In acpi_scan_attach_handler(), the acpi_device->handler will
not be initialized.

In acpi_scan_hot_remove(), it doesn't check if acpi_device->handler is NULL.
If we do memory hot-remove without ACPI_HOTPLUG_MEMORY configured, the kernel
will panic.

 BUG: unable to handle kernel NULL pointer dereference at 0000000000000088
 IP: [<ffffffff813e318f>] acpi_device_hotplug+0x1d7/0x4c4
 PGD 0
 Oops: 0000 [#1] SMP
 Modules linked in: sd_mod(E) sr_mod(E) cdrom(E) crc_t10dif(E) crct10dif_common(E) ata_piix(E) libata(E)
 CPU: 0 PID: 41 Comm: kworker/u2:1 Tainted: G            E 3.16.0-rc7--3.16-rc7-tangchen+ #20
 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.7.5-0-ge51488c-20140602_164612-nilsson.home.kraxel.org 04/01/2014
 Workqueue: kacpi_hotplug acpi_hotplug_work_fn
 task: ffff8800182436c0 ti: ffff880018254000 task.ti: ffff880018254000
 RIP: 0010:[<ffffffff813e318f>]  [<ffffffff813e318f>] acpi_device_hotplug+0x1d7/0x4c4
 RSP: 0000:ffff880018257da8  EFLAGS: 00000246
 RAX: 0000000000000000 RBX: ffff88001cd8d800 RCX: 0000000000000000
 RDX: 0000000000000000 RSI: ffff88001e40e6f8 RDI: 0000000000000246
 RBP: ffff880018257df0 R08: 0000000000000096 R09: 00000000000011a0
 R10: 63735f6970636120 R11: 725f746f685f6e61 R12: 0000000000000003
 R13: ffff88001cc1c400 R14: ffff88001e062028 R15: 0000000000000040
 FS:  0000000000000000(0000) GS:ffff88001e400000(0000) knlGS:0000000000000000
 CS:  0010 DS: 0000 ES: 0000 CR0: 000000008005003b
 CR2: 0000000000000088 CR3: 000000001a9a2000 CR4: 00000000000006f0
 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
 DR3: 0000000000000000 DR6: 0000000000000000 DR7: 0000000000000000
 Stack:
  00000000523cab58 ffff88001cd8d9f8 ffff88001852d480 00000000523cab58
  ffff88001852d480 ffff880018221e40 ffff88001cc1c400 ffff88001cce2d00
  0000000000000040 ffff880018257e08 ffffffff813dc31d ffff88001852d480
 Call Trace:
  [<ffffffff813dc31d>] acpi_hotplug_work_fn+0x1e/0x29
  [<ffffffff8108eefb>] process_one_work+0x17b/0x460
  [<ffffffff8108f69d>] worker_thread+0x11d/0x5b0
  [<ffffffff8108f580>] ? rescuer_thread+0x3a0/0x3a0
  [<ffffffff81096811>] kthread+0xe1/0x100
  [<ffffffff81096730>] ? kthread_create_on_node+0x1a0/0x1a0
  [<ffffffff816cc6bc>] ret_from_fork+0x7c/0xb0
  [<ffffffff81096730>] ? kthread_create_on_node+0x1a0/0x1a0

This patch fixes this problem by checking if acpi_device->handler is NULL
in acpi_scan_hot_remove().

Fixes: d22ddcbc (ACPI / hotplug: Add demand_offline hotplug profile flag)
Signed-off-by: NTang Chen <tangchen@cn.fujitsu.com>
Cc: 3.14+ <stable@vger.kernel.org> # 3.14+
[rjw: Subject]
Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>

CPU hotplug happens during S2RAM and CPU notify event will be CPU_XXX_FROZEN.
acpi_cpu_soft_notify() ignores to check these events. This also may make
acpi_cpu_soft_notify() fall into sleep during CPU_DYING/STARTING_FROZEN
events which don't allow callbacks to sleep. This patch is to fix it.
Signed-off-by: NLan Tianyu <tianyu.lan@intel.com>
Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>

INT3438 is the ADSP device on Wildcat Point platform
with 2 DW DMA engines built In. The DMA engines are
used for DSP FW loading and audio data transferring.
These DMA engine probing need the clock, without it,
probing may failed and can't go forward.

Add LPSS device "INT3438" for Wildcat Point PCH, to
provide clock for its ADSP DMA engine probing.
Signed-off-by: NJie Yang <yang.jie@intel.com>
Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>

0 is ascii for NULL. Hex digit matching should be from '0'.
Faulty version returns true for #,$,%,& etc.
Signed-off-by: NArjun Sreedharan <arjun024@gmail.com>
Acked-by: NRandy Dunlap <rdunlap@infradead.org>
Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>

Full support for _CCA.
Signed-off-by: NBob Moore <robert.moore@intel.com>
Signed-off-by: NLv Zheng <lv.zheng@intel.com>
Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>

New value for the Notify() operator.
Signed-off-by: NBob Moore <robert.moore@intel.com>
Signed-off-by: NLv Zheng <lv.zheng@intel.com>
Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>

Adds full support for _DSD. David Box.
Signed-off-by: NDavid E. Box <david.e.box@linux.intel.com>
Signed-off-by: NBob Moore <robert.moore@intel.com>
Signed-off-by: NLv Zheng <lv.zheng@intel.com>
Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>

Simplifies timing of things like control method execution.

[zetalog: fixing 64-bit division link error]
Signed-off-by: NBob Moore <robert.moore@intel.com>
Signed-off-by: NLv Zheng <lv.zheng@intel.com>
Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>

This adds a -u option to acpi_help to display all known ACPI UUIDs.
Some existing files in the core code have been restructured.
Three new files.

[zetalog: changing drivers/acpi/acpica/Makefile accordingly]
Signed-off-by: NBob Moore <robert.moore@intel.com>
Signed-off-by: NLv Zheng <lv.zheng@intel.com>
Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>

The bug can be reproduced by using a format that do not have the width.prec
specified after a format that have the width.prec specified. The second
formatted output will be wrong. The root cause is acpi_ut_vsnprintf()
doesn't reset the specifiers to the default values.

This patch fixes this issue. BZ 1094. Reported by Yizhe Wang, fixed by
Lv Zheng.

Since acpi_ut_vprintf() is only enabled for specific OSPM now, this patch
doesn't affect Linux kernel.

Link: https://bugs.acpica.org/show_bug.cgi?id=1094Reported-and-tested-by: NYizhe Wang <yizhe.wang@intel.com>
Signed-off-by: NLv Zheng <lv.zheng@intel.com>
Signed-off-by: NBob Moore <robert.moore@intel.com>
Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>

Arguments that have no associated % format specifier.
Apparently these are not caught by any current compilers.
ACPICA BZ 1090. Sascha Wildner.

Currently, this patch only affects applications under the
toos/power/acpi folder.

Link: https://bugs.acpica.org/show_bug.cgi?id=1090Signed-off-by: NSascha Wildner <swildner@gmail.com>
Signed-off-by: NBob Moore <robert.moore@intel.com>
Signed-off-by: NLv Zheng <lv.zheng@intel.com>
Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>

Fix some issues detected by acpisrc utility.
Signed-off-by: NBob Moore <robert.moore@intel.com>
Signed-off-by: NLv Zheng <lv.zheng@intel.com>
Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>

This change adds support to disassemble a UUID back to the original
ToUUID operator. It will detect a UUID within a standard AML Buffer.
Also, a description of the UUID is emitted for "known" UUIDs, defined
as UUIDs that are defined in the ACPI specification.

Since this is a change for disassembler which is not shipped in the
Linux kernel, the Linux kernel is not affected.
Signed-off-by: NBob Moore <robert.moore@intel.com>
Signed-off-by: NLv Zheng <lv.zheng@intel.com>
Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>

warning: cast from function call of type 'char *' to non-matching type 'long unsigned int'

Since acpi_ut_format_number() hasn't been enabled for the Linux kernel,
this patch doesn't affect the Linux kernel.
Signed-off-by: NBob Moore <robert.moore@intel.com>
Signed-off-by: NLv Zheng <lv.zheng@intel.com>
Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>

Logical processors with APIC ID values of 255 and greater are
required to have a Processor Device object and must convey the
processor's APIC information to OSPM using the Processor Local
X2APIC structure, but not until ACPI 5.1, X2APIC structure was
not supported in _MAT method.

_MAT is needed for CPU hotplug and system with more than 255
CPUs will definitely need X2APIC structure, so add its support
in map_mat_entry() to make it possible to get local x2apic id
via _MAT based on ACPI 5.1.
Signed-off-by: NHanjun Guo <hanjun.guo@linaro.org>
Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>

Remove duplicated include.
Signed-off-by: NWei Yongjun <yongjun_wei@trendmicro.com.cn>
Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>

Link: https://bugzilla.redhat.com/show_bug.cgi?id=1123565Signed-off-by: NHans de Goede <hdegoede@redhat.com>
Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>

NVS region is saved and restored unconditionally for machines without
nvs_nosave quirk during S3. Tested some new machines and the operation
is not necessary. Saving NVS region also affects S2RAM speed. The time of
NVS saving and restoring depends on the size of NVS region and it consumes
7~10ms normally.

This patch is to make machines produced from 2012 to now not saving NVS region
to accelerate S3.
Signed-off-by: NLan Tianyu <tianyu.lan@intel.com>
Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>

The ACPI device enumeration code in Linux assumes that buttons always
are wakeup devices, so it calls acpi_setup_gpe_for_wake() for them
which leads to undesirable side effects.  Namely, that function sets
up implicit device wake notification mechanism for a given GPE if
there is no handler method in the ACPI namespace, which from the
ACPICA's perspective means that there always is a way to handle
that GPE if enabled.  However, we don't handle wake notify events
for buttons, so if there are no handler methods for their GPEs in
the namespace, enabling a button GPE at run time leads to a GPE
storm in some cases (the GPE triggers, ACPICA carries out the
implicit wake notification for it which isn't handled, so the
GPE triggers again and so on).

To prevent that from happening use acpi_mark_gpe_for_wake()
instead of acpi_setup_gpe_for_wake() for buttons which will cause
ACPICA to only enable button GPEs if there are handler methods for
the in the namespace.
Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>

ACPICA commit c49dbfed2bc069d0038ea7e1294409bfde7c2c8c

Some potential callers of acpi_setup_gpe_for_wake may know in advance that
there won't be any notify handlers installed for device wake notifications
from the given GPE (one example is a button GPE in Linux). For these cases,
acpi_mark_gpe_for_wake should be used instead of acpi_setup_gpe_for_wake.
This will set the ACPI_GPE_CAN_WAKE flag for the GPE without trying to
setup implicit wake notification for it (since there's no handler method).
Rafael Wysocki.
Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: NBob Moore <robert.moore@intel.com>
Signed-off-by: NLv Zheng <lv.zheng@intel.com>

ACPICA commit 23b5a8542283af28c3a3a4e3f81096d6e2569faa

There is no point in enabling a GPE that has no handler or
GPE method. At worst, it can cause GPE floods.
Rafael Wysocki.
Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: NBob Moore <robert.moore@intel.com>
Signed-off-by: NLv Zheng <lv.zheng@intel.com>

As there is only CONFIG_ACPI=n processing in the <linux/acpi.h>, it is not
safe to include <acpi/acpi.h> directly for source out of Linux ACPI
subsystems.

This patch adds error messaging to warn developers of such wrong
inclusions.

In order not to be bisected and reverted as a wrong commit, warning
messages are carefully split into a seperate patch other than the wrong
inclusion cleanups.
Signed-off-by: NLv Zheng <lv.zheng@intel.com>
Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>

The ACPI_HANDLE() macro evaluates ACPI_COMPANION() internally to
return the handle of the device's ACPI companion, so it is much
more straightforward and efficient to use ACPI_COMPANION()
directly to obtain the device's ACPI companion object instead of
using ACPI_HANDLE() and acpi_bus_get_device() on the returned
handle for the same thing.

Do that in three places in the ACPI device PM code.
Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>

Wakeup GPEs are currently only enabled when setting up devices for
remote wakeup at run time.  During system-wide transitions they are
enabled by ACPICA at the very last stage of suspend (before asking
the BIOS to take over).  Of course, that only works for system
sleep states supported by ACPI, so in particular it doesn't work
for the "freeze" sleep state.

For this reason, modify the ACPI core device PM code to enable wakeup
GPEs for devices when setting them up for wakeup regardless of whether
that is remote wakeup at runtime or system wakeup.  That allows the
same device wakeup setup routine to be used for both runtime PM and
system-wide PM and makes it possible to reduce code size quite a bit.

This make ACPI-based PCI Wake-on-LAN work with the "freeze" sleep
state on my venerable Toshiba Portege R500 and should help other
systems too.
Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>

Since ACPI wakeup GPEs are going to be enabled during system suspend
as well as for runtime wakeup by a subsequent patch and the same
notify handlers will be used in both cases, rework the ACPI device
wakeup notification framework so that the part specific to physical
devices is always run asynchronously from the PM workqueue.  This
prevents runtime resume callbacks for those devices from being
run during system suspend and resume which may not be appropriate,
among other things.

Also make ACPI device wakeup notification handling a bit more robust
agaist subsequent removal of ACPI device objects, whould that ever
happen, and create a wakeup source object for each ACPI device
configured for wakeup so that wakeup notifications for those
devices can wake up the system from the "freeze" sleep state.
Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>

During system suspend mark ACPI buttons (other than the lid) as
"suspended" and if in that state, report wakeup events on button
events, but do not propagate those events up the stack.

This prevents systems from being turned off after a button-triggered
wakeup from the "freeze" sleep state.

Link: https://bugzilla.kernel.org/show_bug.cgi?id=77611
Tested-on: Acer Aspire S5, Toshiba Portege R500
Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>

GHES currently maps two pages with atomic_ioremap.  From now
on, NMI is architectural depended so there is no need to allocate
an NMI page for platforms without NMI support.

To make it possible to not use a second page, swap the existing
page order so that the IRQ context page is first, and the optional
NMI context page is second.  Then, use HAVE_ACPI_APEI_NMI to decide
how many pages are to be allocated.
Signed-off-by: NTomasz Nowicki <tomasz.nowicki@linaro.org>
Acked-by: NBorislav Petkov <bp@suse.de>
Signed-off-by: NTony Luck <tony.luck@intel.com>

Currently APEI depends on x86 architecture. It is because of NMI hardware
error notification of GHES which is currently supported by x86 only.
However, many other APEI features can be still used perfectly by other
architectures.

This commit adds two symbols:
1. HAVE_ACPI_APEI for those archs which support APEI.
2. HAVE_ACPI_APEI_NMI which is used for NMI code isolation in ghes.c
   file. NMI related data and functions are grouped so they can be wrapped
   inside one #ifdef section. Appropriate function stubs are provided for
   !NMI case.

Note there is no functional changes for x86 due to hard selected
HAVE_ACPI_APEI and HAVE_ACPI_APEI_NMI symbols.
Signed-off-by: NTomasz Nowicki <tomasz.nowicki@linaro.org>
Acked-by: NBorislav Petkov <bp@suse.de>
Signed-off-by: NTony Luck <tony.luck@intel.com>

This commit abstracts MCE calls and provides weak corresponding default
implementation for those architectures which do not need arch specific
actions. Each platform willing to do additional architectural actions
should provides desired function definition. It allows us to avoid wrap
code into #ifdef in generic code and prevent new platform from introducing
dummy stub function too.

Initially, there are two APEI arch-specific calls:
- arch_apei_enable_cmcff()
- arch_apei_report_mem_error()
Both interact with MCE driver for X86 architecture.
Signed-off-by: NTomasz Nowicki <tomasz.nowicki@linaro.org>
Acked-by: NBorislav Petkov <bp@suse.de>
Signed-off-by: NTony Luck <tony.luck@intel.com>

The use of _PDC is deprecated in ACPI 3.0 in favor of _OSC,
as ARM platform is supported only in ACPI 5.0 or higher version,
_PDC will not be used in ARM platform, so make Make _PDC only for
platforms with Intel CPUs.

Introduce ARCH_MIGHT_HAVE_ACPI_PDC and move _PDC related code in
ACPI processor driver into a single file processor_pdc.c, make x86
and ia64 select it when ACPI is enabled.

This patch also use pr_* to replace printk to fix the checkpatch
warning and factor acpi_processor_alloc_pdc() a little bit to
avoid duplicate pr_err() code.
Suggested-by: NRobert Richter <rric@kernel.org>
Signed-off-by: NHanjun Guo <hanjun.guo@linaro.org>
Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>

Now ARM64 support is being added to ACPI so architecture specific
values can not be used in core ACPI code.

Following on the patch "ACPI / processor: Check if LAPIC is present
during initialization" which uses acpi_lapic in acpi_processor.c,
on ARM64 platform, GIC is used instead of local APIC, so acpi_lapic
is not a suitable value for ARM64.

What is actually important at this point is if there is/are CPU
entry/entries (Local APIC/SAPIC, GICC) in MADT, so introduce
acpi_has_cpu_in_madt() to be arch specific and generic.
Signed-off-by: NGraeme Gregory <graeme.gregory@linaro.org>
Signed-off-by: NHanjun Guo <hanjun.guo@linaro.org>
Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>

With the addition of ARM64 that does not have a traditional BIOS to
scan, add a config option which is selected on x86 (ia64 doesn't need
it either, it is EFI/UEFI based system) to do the traditional BIOS
scanning for tables.
Signed-off-by: NGraeme Gregory <graeme.gregory@linaro.org>
Signed-off-by: NHanjun Guo <hanjun.guo@linaro.org>
Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>