Skip to content

R
raspberrypi-kernel

openeuler / raspberrypi-kernel

通知 13
Star 1
Fork 0
R
raspberrypi-kernel
切换分支/标签
  1. 31 10月, 2008 12 次提交
  3. 30 10月, 2008 1 次提交
  5. 29 10月, 2008 5 次提交
    • G
      x86: remove debug code from arch_add_memory() · fe8b868e
      由 Gary Hade 提交于 
      Impact: remove incorrect WARN_ON(1)

Gets rid of dmesg spam created during physical memory hot-add which
will very likely confuse users.  The change removes what appears to
be debugging code which I assume was unintentionally included in:

  x86: arch/x86/mm/init_64.c printk fixes
  commit 10f22ddeSigned-off-by: NGary Hade <garyhade@us.ibm.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>
      fe8b868e
    • H
      x86: start annotating early ioremap pointers with __iomem · 1d6cf1fe
      由 Harvey Harrison 提交于 
      Impact: some new sparse warnings in e820.c etc, but no functional change.

As with regular ioremap, iounmap etc, annotate with __iomem.

Fixes the following sparse warnings, will produce some new ones
elsewhere in arch/x86 that will get worked out over time.

arch/x86/mm/ioremap.c:402:9: warning: cast removes address space of expression
arch/x86/mm/ioremap.c:406:10: warning: cast adds address space to expression (<asn:2>)
arch/x86/mm/ioremap.c:782:19: warning: Using plain integer as NULL pointer
Signed-off-by: NHarvey Harrison <harvey.harrison@gmail.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>
      1d6cf1fe
    • H
      x86: two trivial sparse annotations · 9352f569
      由 Harvey Harrison 提交于 
      Impact: fewer sparse warnings, no functional changes

arch/x86/kernel/vsmp_64.c:87:14: warning: incorrect type in argument 1 (different address spaces)
arch/x86/kernel/vsmp_64.c:87:14:    expected void const volatile [noderef] <asn:2>*addr
arch/x86/kernel/vsmp_64.c:87:14:    got void *[assigned] address
arch/x86/kernel/vsmp_64.c:88:22: warning: incorrect type in argument 1 (different address spaces)
arch/x86/kernel/vsmp_64.c:88:22:    expected void const volatile [noderef] <asn:2>*addr
arch/x86/kernel/vsmp_64.c:88:22:    got void *
arch/x86/kernel/vsmp_64.c:100:23: warning: incorrect type in argument 2 (different address spaces)
arch/x86/kernel/vsmp_64.c:100:23:    expected void volatile [noderef] <asn:2>*addr
arch/x86/kernel/vsmp_64.c:100:23:    got void *
arch/x86/kernel/vsmp_64.c:101:23: warning: incorrect type in argument 1 (different address spaces)
arch/x86/kernel/vsmp_64.c:101:23:    expected void const volatile [noderef] <asn:2>*addr
arch/x86/kernel/vsmp_64.c:101:23:    got void *
arch/x86/mm/gup.c:235:6: warning: incorrect type in argument 1 (different base types)
arch/x86/mm/gup.c:235:6:    expected void const volatile [noderef] <asn:1>*<noident>
arch/x86/mm/gup.c:235:6:    got unsigned long [unsigned] [assigned] start
Signed-off-by: NHarvey Harrison <harvey.harrison@gmail.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>
      9352f569
    • Y
      x86: fix init_memory_mapping for [dc000000 - e0000000) - v2 · f96f57d9
      由 Yinghai Lu 提交于 
      Impact: change over-mapping to precise mapping, fix /proc/meminfo output

v2: fix less than 1G ram system handling

when gart aperture is 0xdc000000 - 0xe0000000
it return 0xc0000000 - 0xe0000000

that is not right.

this patch fix that will get exact mapping

on 256g sytem with that aperture after patch
LBSuse:~ # cat /proc/meminfo
MemTotal:       264742432 kB
MemFree:        263920628 kB
Buffers:            1416 kB
Cached:            24468 kB
...
DirectMap4k:      5760 kB
DirectMap2M:   3205120 kB
DirectMap1G:  265289728 kB

it is consistent to
LBSuse:~ # cat /sys/kernel/debug/kernel_page_tables
..
---[ Low Kernel Mapping ]---
0xffff880000000000-0xffff880000200000           2M     RW             GLB x  pte
0xffff880000200000-0xffff880040000000        1022M     RW         PSE GLB x  pmd
0xffff880040000000-0xffff8800c0000000           2G     RW         PSE GLB NX pud
0xffff8800c0000000-0xffff8800d7e00000         382M     RW         PSE GLB NX pmd
0xffff8800d7e00000-0xffff8800d7fa0000        1664K     RW             GLB NX pte
0xffff8800d7fa0000-0xffff8800d8000000         384K                           pte
0xffff8800d8000000-0xffff8800dc000000          64M                           pmd
0xffff8800dc000000-0xffff8800e0000000          64M     RW         PSE GLB NX pmd
0xffff8800e0000000-0xffff880100000000         512M                           pmd
0xffff880100000000-0xffff880800000000          28G     RW         PSE GLB NX pud
0xffff880800000000-0xffff880824600000         582M     RW         PSE GLB NX pmd
0xffff880824600000-0xffff8808247f0000        1984K     RW             GLB NX pte
0xffff8808247f0000-0xffff880824800000          64K     RW     PCD     GLB NX pte
0xffff880824800000-0xffff880840000000         440M     RW         PSE GLB NX pmd
0xffff880840000000-0xffff884000000000         223G     RW         PSE GLB NX pud
0xffff884000000000-0xffff884028000000         640M     RW         PSE GLB NX pmd
0xffff884028000000-0xffff884040000000         384M                           pmd
0xffff884040000000-0xffff888000000000         255G                           pud
0xffff888000000000-0xffffc20000000000       58880G                           pgd
Signed-off-by: NYinghai Lu <yinghai@kernel.org>
Signed-off-by: NIngo Molnar <mingo@elte.hu>
      f96f57d9
    • J
      x86, gart: fix gart detection for Fam11h CPUs · 87c6f401
      由 Joerg Roedel 提交于 
      Impact: fix AMD Family 11h boot hangs / USB device problems

The AMD Fam11h CPUs have a K8 northbridge. This northbridge is different
from other family's because it lacks GART support (as I just learned).

But the kernel implicitly expects a GART if it finds an AMD northbridge.

Fix this by removing the Fam11h northbridge id from the scan list of K8
northbridges. This patch also changes the message in the GART driver
about missing K8 northbridges to tell that the GART is missing which is
the correct information in this case.
Reported-by: NJouni Malinen <jkmalinen@gmail.com>
Signed-off-by: NJoerg Roedel <joerg.roedel@amd.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>
      87c6f401
  7. 28 10月, 2008 10 次提交
  9. 27 10月, 2008 3 次提交
    • S
      ftrace: use a real variable for ftrace_nop in x86 · 8115f3f0
      由 Steven Rostedt 提交于 
      Impact: avoid section mismatch warning, clean up

The dynamic ftrace determines which nop is safe to use at start up.
When it finds a safe nop for patching, it sets a pointer called ftrace_nop
to point to the code. All call sites are then patched to this nop.

Later, when tracing is turned on, this ftrace_nop variable is again used
to compare the location to make sure it is a nop before we update it to
an mcount call. If this fails just once, a warning is printed and ftrace
is disabled.

Rakib Mullick noted that the code that sets up the nop is a .init section
where as the nop itself is in the .text section. This is needed because
the nop is used later on after boot up. The problem is that the test of the
nop jumps back to the setup code and causes a "section mismatch" warning.

Rakib first recommended to convert the nop to .init.text, but as stated
above, this would fail since that text is used later.

The real solution is to extend Rabik's patch, and to make the ftrace_nop
into an array, and just save the code from the assembly to this array.

Now the section can stay as an init section, and we have a nop to use
later on.
Reported-by: NRakib Mullick <rakib.mullick@gmail.com>
Signed-off-by: NSteven Rostedt <srostedt@redhat.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>
      8115f3f0
    • C
      x86/uv: memory allocation at initialization · ef020ab0
      由 Cliff Wickman 提交于 
      Impact: on SGI UV platforms, fix boot crash

UV initialization is currently called too late to call alloc_bootmem_pages().
The current sequence is:

 start_kernel()
   mem_init()
     free_all_bootmem()           <--- discard of bootmem
   rest_init()
     kernel_init()
       smp_prepare_cpus()
       native_smp_prepare_cpus()
         uv_system_init()         <--- uses alloc_bootmem_pages()

It should be calling kmalloc().
Signed-off-by: NCliff Wickman <cpw@sgi.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>
      ef020ab0
    • C
      xen: fix Xen domU boot with batched mprotect · 9f32d21c
      由 Chris Lalancette 提交于 
      Impact: fix guest kernel boot crash on certain configs

Recent i686 2.6.27 kernels with a certain amount of memory (between
736 and 855MB) have a problem booting under a hypervisor that supports
batched mprotect (this includes the RHEL-5 Xen hypervisor as well as
any 3.3 or later Xen hypervisor).

The problem ends up being that xen_ptep_modify_prot_commit() is using
virt_to_machine to calculate which pfn to update.  However, this only
works for pages that are in the p2m list, and the pages coming from
change_pte_range() in mm/mprotect.c are kmap_atomic pages.  Because of
this, we can run into the situation where the lookup in the p2m table
returns an INVALID_MFN, which we then try to pass to the hypervisor,
which then (correctly) denies the request to a totally bogus pfn.

The right thing to do is to use arbitrary_virt_to_machine, so that we
can be sure we are modifying the right pfn.  This unfortunately
introduces a performance penalty because of a full page-table-walk,
but we can avoid that penalty for pages in the p2m list by checking if
virt_addr_valid is true, and if so, just doing the lookup in the p2m
table.

The attached patch implements this, and allows my 2.6.27 i686 based
guest with 768MB of memory to boot on a RHEL-5 hypervisor again.
Thanks to Jeremy for the suggestions about how to fix this particular
issue.
Signed-off-by: NChris Lalancette <clalance@redhat.com>
Signed-off-by: NJeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Cc: Chris Lalancette <clalance@redhat.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>
      9f32d21c
  11. 25 10月, 2008 1 次提交
  13. 24 10月, 2008 2 次提交
    • F
      x86: restore the old swiotlb alloc_coherent behavior · 03967c52
      由 FUJITA Tomonori 提交于 
      This restores the old swiotlb alloc_coherent behavior (before the
alloc_coherent rewrite):

  http://lkml.org/lkml/2008/8/12/200

The old alloc_coherent avoids GFP_DMA allocation first and if the
allocated address is not fit for the device's coherent_dma_mask, then
dma_alloc_coherent does GFP_DMA allocation. If it fails,
alloc_coherent calls swiotlb_alloc_coherent (in short, we rarely used
swiotlb_alloc_coherent).

After the alloc_coherent rewrite, dma_alloc_coherent
(include/asm-x86/dma-mapping.h) directly calls swiotlb_alloc_coherent.
It means that we possibly can't handle a device having dma_masks >
24bit < 32bits since swiotlb_alloc_coherent doesn't have the above
GFP_DMA retry mechanism.

This patch fixes x86's swiotlb alloc_coherent to use the GFP_DMA retry
mechanism, which dma_generic_alloc_coherent() provides now
(pci-nommu.c and GART IOMMU driver also use
dma_generic_alloc_coherent).
Signed-off-by: NFUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Signed-off-by: NIngo Molnar <mingo@elte.hu>
      03967c52
    • F
      x86: use GFP_DMA for 24bit coherent_dma_mask · 75bebb7f
      由 FUJITA Tomonori 提交于 
      dma_alloc_coherent (include/asm-x86/dma-mapping.h) avoids GFP_DMA
allocation first and if the allocated address is not fit for the
device's coherent_dma_mask, then dma_alloc_coherent does GFP_DMA
allocation. This is because dma_alloc_coherent avoids precious GFP_DMA
zone if possible. This is also how the old dma_alloc_coherent
(arch/x86/kernel/pci-dma.c) works.

However, if the coherent_dma_mask of a device is 24bit, there is no
point to go into the above GFP_DMA retry mechanism. We had better use
GFP_DMA in the first place.
Signed-off-by: NFUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Tested-by: NTakashi Iwai <tiwai@suse.de>
Signed-off-by: NIngo Molnar <mingo@elte.hu>
      75bebb7f
  15. 23 10月, 2008 6 次提交