Because they all are, the ioctl command never calls us with any of
these violated. Also drop a equally pointless empty debug message (and
also in set_cursor, while we're at it).

With all these changes, intel_crtc_set_config is neatly condensed down
to it's essence, the actual modeset code (or fb update calling code)

v2: The fb helper code is actually stretching ->set_config semantics a bit,
it calls it with set->mode == NULL but set->fb != NULL.
Reviewed-by: NJesse Barnes <jbarnes@virtuousgeek.org>
Signed-Off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Otherwise we'll set_fb complains pretty loudly if we the crtc is off
and userspace moves the NULL fb around a bit. Yeah, this actually
happens in the wild ...
Reviewed-by: NJesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Yikes!

But yeah, we have to do this until someone volunteers to clean up the
fb helper and rid it of its incetious relationship with the crtc
helper code.
Reviewed-by: NJesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Note that this function already clobbers the mode config state,
so we have to clean things up if something fails.
Reviewed-by: NJesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

This computes what exactly changed in the modeset configuration, i.e.
whether a full modeset is required or only an update of the
framebuffer base address or no change at all.

In the future we might add more checks for e.g. when only the output
mode changed, so that we could do a minimal modeset for outputs that
support this. Like the lvds/eDP panels where we only need to update
the panel fitter.
Reviewed-by: NJesse Barnes <jbarnes@virtuousgeek.org>
Signed-Off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

At the end this won't be of much use to us, but meanwhile just extract
it to get a better overview of what exactly set_config does.
Reviewed-by: NJesse Barnes <jbarnes@virtuousgeek.org>
Signed-Off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

intel_crtc_set_config is an unwidly beast and is in serious need of
some function extraction. To facilitate that, introduce a struct to
keep track of all the state involved. Atm it doesn't do much more than
keep track of all the allocated memory.

v2: Apply some bikeshed to intel_set_config_free, as suggested by
Jesse Barnes.
Reviewed-by: NJesse Barnes <jbarnes@virtuousgeek.org>
Signed-Off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Many BIOSen forget to turn on the pipe A after resume (because they
actually don't turn on anything), so we have to do that ourselves when
sanitizing the hw state.

I've discovered this due to the recent addition of a pipe WARN that
takes the force quirk into account.

v2: Actually try to enable the pipe with a proper configuration instead
of simpyl switching it on with whatever random state the bios left it
in after resume.

v3: Fixup rebase conflict - the load_detect functions have lost their
encoder argument.
Reviewed-by: NJesse Barnes <jbarnes@virtuousgeek.org>
Signed-Off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

We now track the connector state in encoder->connectors_active, and
because the DP output can't be cloned, that is sufficient to track the
link state. Hence use this instead of adding yet another modeset state
variable with dubious semantics at driver load and resume time.

Also, connectors_active should only ever be set when the encoder is
linked to a crtc, hence convert that crtc test into a WARN.

v2: Rebase on top of struct intel_dp moving.

v3: The rebase accidentally killed the newly-introduced intel_dp->port
Noticed by Paulo Zanoni.
Reviewed-by: NJesse Barnes <jbarnes@virtuousgeek.org>
Signed-Off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Afaict this has been used for two things:
- To prevent the crtc enable code from being run twice. We have now
  intel_crtc->active to track this in a more precise way.
- To ensure the code copes correctly with the unknown hw state after
  boot and resume. Thanks to the hw state readout and sanitize code we
  have now a better way to handle this.

The only thing it still does is complicate our modeset state space.

Having outlived its usefullness, let it just die.
Reviewed-by: NJesse Barnes <jbarnes@virtuousgeek.org>
Signed-Off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Atm we can only check the connector state after a dpms call - while
doing modeset with the copy&pasted crtc helper code things are too
ill-defined for proper checking. But the idea is very much to call
this check from the modeset code, too.

v2: Fix dpms check and don't presume that if the hw isn't on that it
must not be linked up with an encoder (it could simply be switched off
with the dpms state).
Reviewed-by: NJesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

... instead of resetting a few things and hoping that this will work
out.

To properly disable the output pipelines at the initial modeset after
resume or boot up we need to have an accurate picture of which outputs
are enabled and connected to which crtcs. Otherwise we risk disabling
things at the wrong time, which can lead to hangs (or at least royally
confused panels), both requiring a walk to the reset button to fix.

Hence read out the hw state with the freshly introduce get_hw_state
functions and then sanitize it afterwards.

For a full modeset readout (which would allow us to avoid the initial
modeset at boot up) a few things are still missing:
- Reading out the mode from the pipe, especially the dotclock
  computation is quite some fun.
- Reading out the parameters for the stolen memory framebuffer and
  wrapping it up.
- Reading out the pch pll connections - luckily the disable code
  simply bails out if the crtc doesn't have a pch pll attached (even
  for configurations that would need one).

This patch here turned up tons of smelly stuff around resume: We
restore tons of register in seemingly random way (well, not quite, but
we're not too careful either), which leaves the hw in a rather
ill-defined state: E.g. the port registers are sometimes
unconditionally restore (lvds, crt), leaving us with an active
encoder/connector but no active pipe connected to it. Luckily the hw
state sanitizer detects this madness and fixes things up a bit.

v2: When checking whether an encoder with active connectors has a crtc
wire up to it, check for both the crtc _and_ it's active state.

v3:
- Extract intel_sanitize_encoder.
- Manually disable active encoders without an active pipe.

v4: Correclty fix up the pipe<->plane mapping on machines where we
switch pipes/planes. Noticed by Chris Wilson, who also provided the
fixup.

v5: Spelling fix in a comment, noticed by Paulo Zanoni
Reviewed-by: NJesse Barnes <jbarnes@virtuousgeek.org>
Signed-Off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Similar to the sdvo code we poke the dvo encoder whether the output is
active. Safe that dvo encoders are not standardized, so this requires
a new callback into the dvo chip driver.

Hence implement that for all 6 dvo drivers.

v2: With the newly added ns2501 we now have 6 dvo drivers instead of
just 5 ...
Acked-by: NJesse Barnes <jbarnes@virtuousgeek.org>
Signed-Off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

SDVO is the first real special case - we support multiple outputs on
the same encoder and the encoder dpms state isn't the same as when
just disabling the outputs when the encoder is cloned.

Hence we need a real connector get_hw_state function which inquires
the sdvo encoder about its active outputs.
Reviewed-by: NJesse Barnes <jbarnes@virtuousgeek.org>
Signed-Off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Note that even though this connector is cloneable we still can use the
exact same test to check whether the connector is on or whether the
encoder is enabled - both the dpms code and the encoder disable/enable
frob the exact same hw state.

For dvo/sdvo outputs, this will be different.
Reviewed-by: NJesse Barnes <jbarnes@virtuousgeek.org>
Signed-Off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Reviewed-by: NJesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Reviewed-by: NJesse Barnes <jbarnes@virtuousgeek.org>
Signed-Off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Reviewed-by: NJesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Also add some macros to make the pipe computation a bit easier.

v2: I've mixed up the CPT and !CPT PORT_TO_PIPE macro variants ...
Reviewed-by: NJesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

It is all glorious if we try really hard to only enable/disable an
entire display pipe to ensure that everyting happens in the right
order. But if we don't know the output configuration when the driver
takes over, this will all be for vain because we'll make the hw angry
right on the first modeset - we don't know what outputs/ports are
enabled and hence have to disable everything in a rather ad-hoc way.

Hence we need to be able to read out the current hw state, so that we
can properly tear down the current hw state on the first modeset.
Obviously this is also a nice preparation for the fastboot work, where
we try to avoid the modeset on driver load if it matches what the hw
is currently using.

Furthermore we'll be using these functions to cross-check the actual
hw state with what we think it should be, to ensure that the modeset
state machine actually works as advertised.

This patch only contains the interface definitions and a little helper
for the simple case where we have a 1:1 encoder to connector mapping.
Reviewed-by: NJesse Barnes <jbarnes@virtuousgeek.org>
Signed-Off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

This is the first tiny step towards cross-checking the entire modeset
state machine with WARNs. A crtc can only be enabled when it's
actually in use, i.e. crtc->active imlies crtc->enabled.

Unfortunately we can't (yet) check this when disabling the crtc,
because the crtc helpers are a bit slopy with updating state and
unconditionally update crtc->enabled before changing the hw state.

Fixing that requires quite some more work.
Reviewed-by: NJesse Barnes <jbarnes@virtuousgeek.org>
Signed-Off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Instead of going through the crtc helper function tables.
Reviewed-by: NJesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

With the new infrastructure we're doing this when enabling/disabling
the entire display pipe.
Reviewed-by: NJesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

- We don't have the ->get_crtc callback.
- Call intel_encoder->disable directly.
Reviewed-by: NJesse Barnes <jbarnes@virtuousgeek.org>
Signed-Off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Together with the static helper functions drm_crtc_prepare_encoders
and drm_encoder_disable (which will be simplified in the next patch,
but for now are 1:1 copies). Again, no changes beside new names for
these functions.

Also call our new set_mode instead of the crtc helper one now in all
the places we've done so far.

v2: Call the function just intel_set_mode to better differentia it
from intel_crtc_mode_set which really only does the ->mode_set step of
the entire modeset sequence on one crtc. Whereas this function does
the global change.
Acked-by: NJesse Barnes <jbarnes@virtuousgeek.org>
Signed-Off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Also kill the error-path, we have a fixed connector->encoder mapping.

Unfortunately we can't rip out all the ->best_encoder callbacks, these
are all still used by the fb_helper. Neat helper layering violation there.
Reviewed-by: NJesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

And drop the check, we always have it.
Reviewed-by: NJesse Barnes <jbarnes@virtuousgeek.org>
Signed-Off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

And the following static functions required by it:
drm_encoder_crtc_ok, drm_crtc_helper_disable

No changes safe for the s/drm/intel prefix change.
Acked-by: NJesse Barnes <jbarnes@virtuousgeek.org>
Signed-Off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

We no longer need them. And now that all encoders are converted, we
can finally move the cpt modeset check to the right place - at the end
of the crtc_enable function.
Reviewed-by: NJesse Barnes <jbarnes@virtuousgeek.org>
Signed-Off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

All encoders are now converted so there's no need for these checks any
more.
Reviewed-by: NJesse Barnes <jbarnes@virtuousgeek.org>
Signed-Off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Yeah, big patch but I couldn't come up with a neat idea of how to
split it up further, that wouldn't break dpms on cloned configs
somehow. But the changes in dvo/sdvo/crt are all pretty much
orthonogal, so it's not too bad a patch.

These are the only encoders that support cloning, which requires a few
special changes compared to the previous patches.
- Compute the desired state of the display pipe by walking all
  connected encoders and checking whether any has active connectors.
  To make this clearer, drop the old mode parameter to the crtc dpms
  function and rename it to intel_crtc_update_dpms.
- There's the curious case of intel_crtc->dpms_mode. With the previous
  patches to remove the overlay pipe A code and to rework the load
  detect pipe code, the big users are gone. We still keep it to avoid
  enabling the pipe twice, but we duplicate this logic with
  crtc->active, too. Still, leave this for now and just push a fake
  dpms mode into it that reflects the state of the display pipe.

Changes in the encoder dpms functions:
- We clamp the dpms state to the supported range right away. This is
  escpecially important for the VGA outputs, where only older hw
  supports the intermediate states. This (and the crt->adpa_reg patch)
  allows us to unify the crt dpms code again between all variants
  (gmch, vlv and pch).
- We only enable/disable the output for dvo/sdvo and leave the encoder
  running. The encoder will be disabled/enabled when we switch the
  state of the entire output pipeline (which will happen right away
  for non-cloned setups). This way the duplication is reduced and
  strange interaction when disabling output ports at the wrong time
  avoided.

The dpms code for all three types of connectors contains a bit of
duplicated logic, but I think keeping these special cases separate is
simpler: CRT is the only one that hanldes intermediate dpms state
(which requires extra logic to enable/disable things in the right
order), and introducing some abstraction just to share the code
between dvo and sdvo smells like overkill. We can do that once someone
bothers to implement cloning for the more modern outputs. But I doubt
that this will ever happen.

v2: s/crtc/crt/_set_dpms, noticed by Paulo Zanoni.
Reviewed-by: NJesse Barnes <jbarnes@virtuousgeek.org>
Signed-Off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Similar to the sdvo conversion.
Reviewed-by: NJesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Similar to crt, this doesn't convert the dpms functions.
Also similar to crt, we don't switch of the display pipe
for the intermediate modes, only DPMS_OFF is truely off.
Reviewed-by: NJesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

CRT is the first output which can be cloned, hence we cannot (yet)
move the dpms handling over to disable/enable. This requires some more
smarts in intel_crtc_dpms first to set the display pipe status
depening upon encoder->connectors_active of all connected encoders.

Because that will happen in a separate step, don't touch the dpms
functions, yet.

v2: Be careful about clearing the _DISABLE flags for intermediate dpms
modes - otherwise we might clobber the crt state when another (cloned)
connector gets enabled.
Reviewed-by: NJesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

DP is the first encoder which isn't simple. As

commit d240f20f
Author: Jesse Barnes <jbarnes@virtuousgeek.org>
Date:   Fri Aug 13 15:43:26 2010 -0700

    drm/i915: make sure eDP PLL is enabled at the right time

discovered, we need to enable the eDP PLL for the cpu port _before_ we
enable the pipes and planes. After a few more commits the current
solution is to enable the PLL in the dp mode_set function (because
this is the only encoder callback the crtc helper code calls before it
calls the crtc's commit function).

Now I suspect that we actually should enable/disable the entire cpu
eDP port before/after planes, but thanks to how the crtc helper code
assumes that you can disable an encoder without disabling it's crtc
right away, this won't work.

The result is that the current prepare/commit hooks don't touch the
eDP PLL, but instead it get's frobbed in dp_mode_set and in the dp
dpms function. Hence we need to keep things (at least for now)
bug-for-bug compatible by using our own special dp dpms function and
keep everything else more-or-less as-is (just using our own
infrastrucutre now).

This mess can only be cleaned up once we control the entire modeset
sequence and can move things around freely.

v2: Squash unsupported dpms modes to OFF at the beginning of the DP
dpms function.

v3: Need to set the dpms state to off in dp_disable, otherwise this
breaks the newly added WARNs ...

v4: Rebased against edp panel off sequence changes in 3.6-rc2
Reviewed-by: NJesse Barnes <jbarnes@virtuousgeek.org>
Signed-Off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

With the previous patch LVDS is also a simple case. Treat it
accordingly.
Reviewed-by: NJesse Barnes <jbarnes@virtuousgeek.org>
Signed-Off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Like hdmi tv outputs are simple: They only have 2 states and can't be
cloned. Hence give it the same treatment.
Reviewed-by: NJesse Barnes <jbarnes@virtuousgeek.org>
Signed-Off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

I've picked hdmi as the first encoder to convert because it's rather
simple:
- no cloning possible
- no differences between prepare/commit and dpms off/on switching.

A few changes are required to do so:
- Split up the dpms code into an enable/disable function and wire it
  up with the intel encoder.
- Noop out the existing encoder prepare/commit functions used by the
  crtc helper - our crtc enable/disable code now calls back into the
  encoder enable/disable code at the right spot.
- Create new helper functions to handle dpms changes.
- Add intel_encoder->connectors_active to better track dpms state. Atm
  this is unused, but it will be useful to correctly disable the
  entire display pipe for cloned configurations. Also note that for
  now this is only useful in the dpms code - thanks to the crtc
  helper's dpms confusion across a modeset operation we can't (yet)
  rely on this having a sensible value in all circumstances.
- Rip out the encoder helper dpms callback, if this is still getting
  called somewhere we have a bug. The slight issue with that is that
  the crtc helper abuses dpms off to disable unused functions. Hence
  we also need to implement a default encoder disable function to do
  just that with the new encoder->disable callback.
- Note that we drop the cpt modeset verification in the commit
  callback, too. The right place to do this would be in the crtc's
  enable function, _after_ all the encoders are set up. But because
  not all encoders are converted yet, we can't do that. Hence disable
  this check temporarily as a minor concession to bisectability.

v2: Squash the dpms mode to only the supported values -
connector->dpms is for internal tracking only, we can hence avoid
needless state-changes a bit whithout causing harm.

v3: Apply bikeshed to disable|enable_ddi, suggested by Paulo Zanoni.
Reviewed-by: NJesse Barnes <jbarnes@virtuousgeek.org>
Signed-Off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Just prep work, not yet put to some use.

Note that because we're still using the crtc helper to switch modes
(and their complicated way to do partial modesets), we need to call
the encoder's disable function unconditionally.

But once this is cleaned up we shouldn't call the encoder's disable
function unconditionally any more, because then we know that we'll
only call it if the encoder is actually enabled. Also note that we
then need to be careful about which crtc we're filtering the encoder
list on: We want to filter on the crtc of the _current_ mode, not the
one we're about to set up.

For the enabling side we need to do the same trick. And again, we
should be able to simplify this quite a bit when things have settled
into place.

Also note that this simply does not take cloning into account, so dpms
needs to be handled specially for the few outputs where we even bother
with it.
Reviewed-by: NJesse Barnes <jbarnes@virtuousgeek.org>
Signed-Off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Just impendance matching with the the crtc helper stuff.

... and somehow the design of this all ended up in this commit here,
too ;-)

The big plan is that this new set of crtc display_funcs take full
responsibility of modeset operations for the entire display output
pipeline (by calling down into object-specific callbacks and
functions). The platform-specific callbacks simply know best what the
proper order is.

This has the drawback that we can't do minimal change-overs any more
if a modeset just disables one encoder in a cloned configuration
(because we will only expose a disable/enable action that takes
down/sets up the entire crtc including all encoders). Imo that's the
only sane way to do it though:
- The use-case for this is pretty minimal, even when presenting (at
  least sane people) should use a dual-screen output so that you can
  see your notes on your panel. Clone mode is imo BS.
- With all the clone mode constrains, shared resources, and special
  ordering requirements (which differ even on the same platform
  sometimes for different outputs) there's no way we'd get this right
  for all cases. Especially since this is a under-used feature.
- And to top it off: On haswell even dp link re-training requires us
  to take down the entire display pipe - otherwise the chip dies.

So the only sane way is to do a full modeset on every crtc where the
output config changes in any way.

To support global modeset (i.e. set the configuration for all crtcs at
once) we'd then add one more function to allocate global and shared
objects in the best ways (e.g. fdi links, pch plls, ...). The crtc
functions would then simply use the pre-allocated stuff (and shouldn't
be able to fail, ever). We could even do all the object pinning in
there (and maybe try to defragment the global gtt if we fail)!
Reviewed-by: NJesse Barnes <jbarnes@virtuousgeek.org>
Signed-Off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>