Skip to content

R
raspberrypi-kernel

openeuler / raspberrypi-kernel

通知 13
Star 1
Fork 0
R
raspberrypi-kernel
切换分支/标签
  1. 13 10月, 2016 1 次提交
    • E
      ipv6: tcp: restore IP6CB for pktoptions skbs · 8ce48623
      由 Eric Dumazet 提交于 
      Baozeng Ding reported following KASAN splat :

BUG: KASAN: use-after-free in ip6_datagram_recv_specific_ctl+0x13f1/0x15c0 at addr ffff880029c84ec8
Read of size 1 by task poc/25548
Call Trace:
 [<ffffffff82cf43c9>] dump_stack+0x12e/0x185 /lib/dump_stack.c:15
 [<     inline     >] print_address_description /mm/kasan/report.c:204
 [<ffffffff817ced3b>] kasan_report_error+0x48b/0x4b0 /mm/kasan/report.c:283
 [<     inline     >] kasan_report /mm/kasan/report.c:303
 [<ffffffff817ced9e>] __asan_report_load1_noabort+0x3e/0x40 /mm/kasan/report.c:321
 [<ffffffff85c71da1>] ip6_datagram_recv_specific_ctl+0x13f1/0x15c0 /net/ipv6/datagram.c:687
 [<ffffffff85c734c3>] ip6_datagram_recv_ctl+0x33/0x40
 [<ffffffff85c0b07c>] do_ipv6_getsockopt.isra.4+0xaec/0x2150
 [<ffffffff85c0c7f6>] ipv6_getsockopt+0x116/0x230
 [<ffffffff859b5a12>] tcp_getsockopt+0x82/0xd0 /net/ipv4/tcp.c:3035
 [<ffffffff855fb385>] sock_common_getsockopt+0x95/0xd0 /net/core/sock.c:2647
 [<     inline     >] SYSC_getsockopt /net/socket.c:1776
 [<ffffffff855f8ba2>] SyS_getsockopt+0x142/0x230 /net/socket.c:1758
 [<ffffffff8685cdc5>] entry_SYSCALL_64_fastpath+0x23/0xc6
Memory state around the buggy address:
 ffff880029c84d80: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
 ffff880029c84e00: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
> ffff880029c84e80: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
                                              ^
 ffff880029c84f00: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
 ffff880029c84f80: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff

He also provided a syzkaller reproducer.

Issue is that ip6_datagram_recv_specific_ctl() expects to find IP6CB
data that was moved at a different place in tcp_v6_rcv()

This patch moves tcp_v6_restore_cb() up and calls it from
tcp_v6_do_rcv() when np->pktoptions is set.

Fixes: 971f10ec ("tcp: better TCP_SKB_CB layout to reduce cache line misses")
Signed-off-by: NEric Dumazet <edumazet@google.com>
Reported-by: NBaozeng Ding <sploving1@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      8ce48623
  3. 08 10月, 2016 1 次提交
  5. 03 10月, 2016 1 次提交
    • M
      ipv6 addrconf: remove addrconf_sysctl_hop_limit() · cb9e684e
      由 Maciej Żenczykowski 提交于 
      This is an effective no-op in terms of user observable behaviour.

By preventing the overwrite of non-null extra1/extra2 fields
in addrconf_sysctl() we can enable the use of proc_dointvec_minmax().

This allows us to eliminate the constant min/max (1..255) trampoline
function that is addrconf_sysctl_hop_limit().

This is nice because it simplifies the code, and allows future
sysctls with constant min/max limits to also not require trampolines.

We still can't eliminate the trampoline for mtu because it isn't
actually a constant (it depends on other tunables of the device)
and thus requires at-write-time logic to enforce range.
Signed-off-by: NMaciej Żenczykowski <maze@google.com>
Acked-by: NErik Kline <ek@google.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      cb9e684e
  7. 30 9月, 2016 3 次提交
  9. 26 9月, 2016 3 次提交
    • N
      ipmr, ip6mr: fix scheduling while atomic and a deadlock with ipmr_get_route · 2cf75070
      由 Nikolay Aleksandrov 提交于 
      Since the commit below the ipmr/ip6mr rtnl_unicast() code uses the portid
instead of the previous dst_pid which was copied from in_skb's portid.
Since the skb is new the portid is 0 at that point so the packets are sent
to the kernel and we get scheduling while atomic or a deadlock (depending
on where it happens) by trying to acquire rtnl two times.
Also since this is RTM_GETROUTE, it can be triggered by a normal user.

Here's the sleeping while atomic trace:
[ 7858.212557] BUG: sleeping function called from invalid context at kernel/locking/mutex.c:620
[ 7858.212748] in_atomic(): 1, irqs_disabled(): 0, pid: 0, name: swapper/0
[ 7858.212881] 2 locks held by swapper/0/0:
[ 7858.213013]  #0:  (((&mrt->ipmr_expire_timer))){+.-...}, at: [<ffffffff810fbbf5>] call_timer_fn+0x5/0x350
[ 7858.213422]  #1:  (mfc_unres_lock){+.....}, at: [<ffffffff8161e005>] ipmr_expire_process+0x25/0x130
[ 7858.213807] CPU: 0 PID: 0 Comm: swapper/0 Not tainted 4.8.0-rc7+ #179
[ 7858.213934] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.7.5-20140531_083030-gandalf 04/01/2014
[ 7858.214108]  0000000000000000 ffff88005b403c50 ffffffff813a7804 0000000000000000
[ 7858.214412]  ffffffff81a1338e ffff88005b403c78 ffffffff810a4a72 ffffffff81a1338e
[ 7858.214716]  000000000000026c 0000000000000000 ffff88005b403ca8 ffffffff810a4b9f
[ 7858.215251] Call Trace:
[ 7858.215412]  <IRQ>  [<ffffffff813a7804>] dump_stack+0x85/0xc1
[ 7858.215662]  [<ffffffff810a4a72>] ___might_sleep+0x192/0x250
[ 7858.215868]  [<ffffffff810a4b9f>] __might_sleep+0x6f/0x100
[ 7858.216072]  [<ffffffff8165bea3>] mutex_lock_nested+0x33/0x4d0
[ 7858.216279]  [<ffffffff815a7a5f>] ? netlink_lookup+0x25f/0x460
[ 7858.216487]  [<ffffffff8157474b>] rtnetlink_rcv+0x1b/0x40
[ 7858.216687]  [<ffffffff815a9a0c>] netlink_unicast+0x19c/0x260
[ 7858.216900]  [<ffffffff81573c70>] rtnl_unicast+0x20/0x30
[ 7858.217128]  [<ffffffff8161cd39>] ipmr_destroy_unres+0xa9/0xf0
[ 7858.217351]  [<ffffffff8161e06f>] ipmr_expire_process+0x8f/0x130
[ 7858.217581]  [<ffffffff8161dfe0>] ? ipmr_net_init+0x180/0x180
[ 7858.217785]  [<ffffffff8161dfe0>] ? ipmr_net_init+0x180/0x180
[ 7858.217990]  [<ffffffff810fbc95>] call_timer_fn+0xa5/0x350
[ 7858.218192]  [<ffffffff810fbbf5>] ? call_timer_fn+0x5/0x350
[ 7858.218415]  [<ffffffff8161dfe0>] ? ipmr_net_init+0x180/0x180
[ 7858.218656]  [<ffffffff810fde10>] run_timer_softirq+0x260/0x640
[ 7858.218865]  [<ffffffff8166379b>] ? __do_softirq+0xbb/0x54f
[ 7858.219068]  [<ffffffff816637c8>] __do_softirq+0xe8/0x54f
[ 7858.219269]  [<ffffffff8107a948>] irq_exit+0xb8/0xc0
[ 7858.219463]  [<ffffffff81663452>] smp_apic_timer_interrupt+0x42/0x50
[ 7858.219678]  [<ffffffff816625bc>] apic_timer_interrupt+0x8c/0xa0
[ 7858.219897]  <EOI>  [<ffffffff81055f16>] ? native_safe_halt+0x6/0x10
[ 7858.220165]  [<ffffffff810d64dd>] ? trace_hardirqs_on+0xd/0x10
[ 7858.220373]  [<ffffffff810298e3>] default_idle+0x23/0x190
[ 7858.220574]  [<ffffffff8102a20f>] arch_cpu_idle+0xf/0x20
[ 7858.220790]  [<ffffffff810c9f8c>] default_idle_call+0x4c/0x60
[ 7858.221016]  [<ffffffff810ca33b>] cpu_startup_entry+0x39b/0x4d0
[ 7858.221257]  [<ffffffff8164f995>] rest_init+0x135/0x140
[ 7858.221469]  [<ffffffff81f83014>] start_kernel+0x50e/0x51b
[ 7858.221670]  [<ffffffff81f82120>] ? early_idt_handler_array+0x120/0x120
[ 7858.221894]  [<ffffffff81f8243f>] x86_64_start_reservations+0x2a/0x2c
[ 7858.222113]  [<ffffffff81f8257c>] x86_64_start_kernel+0x13b/0x14a

Fixes: 2942e900 ("[RTNETLINK]: Use rtnl_unicast() for rtnetlink unicasts")
Signed-off-by: NNikolay Aleksandrov <nikolay@cumulusnetworks.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      2cf75070
    • L
      netfilter: nf_log: get rid of XT_LOG_* macros · 8cb2a7d5
      由 Liping Zhang 提交于 
      nf_log is used by both nftables and iptables, so use XT_LOG_XXX macros
here is not appropriate. Replace them with NF_LOG_XXX.
Signed-off-by: NLiping Zhang <liping.zhang@spreadtrum.com>
Signed-off-by: NPablo Neira Ayuso <pablo@netfilter.org>
      8cb2a7d5
    • L
      netfilter: nft_log: complete NFTA_LOG_FLAGS attr support · ff107d27
      由 Liping Zhang 提交于 
      NFTA_LOG_FLAGS attribute is already supported, but the related
NF_LOG_XXX flags are not exposed to the userspace. So we cannot
explicitly enable log flags to log uid, tcp sequence, ip options
and so on, i.e. such rule "nft add rule filter output log uid"
is not supported yet.

So move NF_LOG_XXX macro definitions to the uapi/../nf_log.h. In
order to keep consistent with other modules, change NF_LOG_MASK to
refer to all supported log flags. On the other hand, add a new
NF_LOG_DEFAULT_MASK to refer to the original default log flags.

Finally, if user specify the unsupported log flags or NFTA_LOG_GROUP
and NFTA_LOG_FLAGS are set at the same time, report EINVAL to the
userspace.
Signed-off-by: NLiping Zhang <liping.zhang@spreadtrum.com>
Signed-off-by: NPablo Neira Ayuso <pablo@netfilter.org>
      ff107d27
  11. 25 9月, 2016 2 次提交
  13. 24 9月, 2016 1 次提交
  15. 21 9月, 2016 2 次提交
  17. 20 9月, 2016 2 次提交
  19. 19 9月, 2016 1 次提交
  21. 17 9月, 2016 1 次提交
  23. 13 9月, 2016 2 次提交
  25. 11 9月, 2016 6 次提交
  27. 10 9月, 2016 1 次提交
    • G
      ipv6: report NLM_F_CREATE and NLM_F_EXCL flags in RTM_NEWROUTE events · 73483c12
      由 Guillaume Nault 提交于 
      Since commit 37a1d361 ("ipv6: include NLM_F_REPLACE in route
replace notifications"), RTM_NEWROUTE notifications have their
NLM_F_REPLACE flag set if the new route replaced a preexisting one.
However, other flags aren't set.

This patch reports the missing NLM_F_CREATE and NLM_F_EXCL flag bits.

NLM_F_APPEND is not reported, because in ipv6 a NLM_F_CREATE request
is interpreted as an append request (contrary to ipv4, "prepend" is not
supported, so if NLM_F_EXCL is not set then NLM_F_APPEND is implicit).

As a result, the possible flag combination can now be reported
(iproute2's terminology into parentheses):

  * NLM_F_CREATE | NLM_F_EXCL: route didn't exist, exclusive creation
    ("add").
  * NLM_F_CREATE: route did already exist, new route added after
    preexisting ones ("append").
  * NLM_F_REPLACE: route did already exist, new route replaced the
    first preexisting one ("change").
Signed-off-by: NGuillaume Nault <g.nault@alphalink.fr>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      73483c12
  29. 09 9月, 2016 1 次提交
  31. 07 9月, 2016 3 次提交
    • W
      ipv6: addrconf: fix dev refcont leak when DAD failed · 751eb6b6
      由 Wei Yongjun 提交于 
      In general, when DAD detected IPv6 duplicate address, ifp->state
will be set to INET6_IFADDR_STATE_ERRDAD and DAD is stopped by a
delayed work, the call tree should be like this:

ndisc_recv_ns
  -> addrconf_dad_failure        <- missing ifp put
     -> addrconf_mod_dad_work
       -> schedule addrconf_dad_work()
         -> addrconf_dad_stop()  <- missing ifp hold before call it

addrconf_dad_failure() called with ifp refcont holding but not put.
addrconf_dad_work() call addrconf_dad_stop() without extra holding
refcount. This will not cause any issue normally.

But the race between addrconf_dad_failure() and addrconf_dad_work()
may cause ifp refcount leak and netdevice can not be unregister,
dmesg show the following messages:

IPv6: eth0: IPv6 duplicate address fe80::XX:XXXX:XXXX:XX detected!
...
unregister_netdevice: waiting for eth0 to become free. Usage count = 1

Cc: stable@vger.kernel.org
Fixes: c15b1cca ("ipv6: move DAD and addrconf_verify processing
to workqueue")
Signed-off-by: NWei Yongjun <weiyongjun1@huawei.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      751eb6b6
    • D
      ipv6: release dst in ping_v6_sendmsg · 03c2778a
      由 Dave Jones 提交于 
      Neither the failure or success paths of ping_v6_sendmsg release
the dst it acquires.  This leads to a flood of warnings from
"net/core/dst.c:288 dst_release" on older kernels that
don't have 8bf4ada2 backported.

That patch optimistically hoped this had been fixed post 3.10, but
it seems at least one case wasn't, where I've seen this triggered
a lot from machines doing unprivileged icmp sockets.

Cc: Martin Lau <kafai@fb.com>
Signed-off-by: NDave Jones <davej@codemonkey.org.uk>
Acked-by: NMartin KaFai Lau <kafai@fb.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      03c2778a
    • L
      netfilter: nft_chain_route: re-route before skb is queued to userspace · d1a6cba5
      由 Liping Zhang 提交于 
      Imagine such situation, user add the following nft rules, and queue
the packets to userspace for further check:
  # ip rule add fwmark 0x0/0x1 lookup eth0
  # ip rule add fwmark 0x1/0x1 lookup eth1
  # nft add table filter
  # nft add chain filter output {type route hook output priority 0 \;}
  # nft add rule filter output mark set 0x1
  # nft add rule filter output queue num 0

But after we reinject the skbuff, the packet will be sent via the
wrong route, i.e. in this case, the packet will be routed via eth0
table, not eth1 table. Because we skip to do re-route when verdict
is NF_QUEUE, even if the mark was changed.

Acctually, we should not touch sk_buff if verdict is NF_DROP or
NF_STOLEN, and when re-route fails, return NF_DROP with error code.
This is consistent with the mangle table in iptables.
Signed-off-by: NLiping Zhang <liping.zhang@spreadtrum.com>
Signed-off-by: NPablo Neira Ayuso <pablo@netfilter.org>
      d1a6cba5
  33. 02 9月, 2016 4 次提交
  35. 31 8月, 2016 1 次提交
    • R
      net: lwtunnel: Handle fragmentation · 14972cbd
      由 Roopa Prabhu 提交于 
      Today mpls iptunnel lwtunnel_output redirect expects the tunnel
output function to handle fragmentation. This is ok but can be
avoided if we did not do the mpls output redirect too early.
ie we could wait until ip fragmentation is done and then call
mpls output for each ip fragment.

To make this work we will need,
1) the lwtunnel state to carry encap headroom
2) and do the redirect to the encap output handler on the ip fragment
(essentially do the output redirect after fragmentation)

This patch adds tunnel headroom in lwtstate to make sure we
account for tunnel data in mtu calculations during fragmentation
and adds new xmit redirect handler to redirect to lwtunnel xmit func
after ip fragmentation.

This includes IPV6 and some mtu fixes and testing from David Ahern.
Signed-off-by: NRoopa Prabhu <roopa@cumulusnetworks.com>
Signed-off-by: NDavid Ahern <dsa@cumulusnetworks.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      14972cbd
  37. 30 8月, 2016 1 次提交
  39. 29 8月, 2016 2 次提交
    • E
      tcp: add tcp_add_backlog() · c9c33212
      由 Eric Dumazet 提交于 
      When TCP operates in lossy environments (between 1 and 10 % packet
losses), many SACK blocks can be exchanged, and I noticed we could
drop them on busy senders, if these SACK blocks have to be queued
into the socket backlog.

While the main cause is the poor performance of RACK/SACK processing,
we can try to avoid these drops of valuable information that can lead to
spurious timeouts and retransmits.

Cause of the drops is the skb->truesize overestimation caused by :

- drivers allocating ~2048 (or more) bytes as a fragment to hold an
  Ethernet frame.

- various pskb_may_pull() calls bringing the headers into skb->head
  might have pulled all the frame content, but skb->truesize could
  not be lowered, as the stack has no idea of each fragment truesize.

The backlog drops are also more visible on bidirectional flows, since
their sk_rmem_alloc can be quite big.

Let's add some room for the backlog, as only the socket owner
can selectively take action to lower memory needs, like collapsing
receive queues or partial ofo pruning.
Signed-off-by: NEric Dumazet <edumazet@google.com>
Cc: Yuchung Cheng <ycheng@google.com>
Cc: Neal Cardwell <ncardwell@google.com>
Acked-by: NNeal Cardwell <ncardwell@google.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      c9c33212
    • T
      tcp: Set read_sock and peek_len proto_ops · 32035585
      由 Tom Herbert 提交于 
      In inet_stream_ops we set read_sock to tcp_read_sock and peek_len to
tcp_peek_len (which is just a stub function that calls tcp_inq).
Signed-off-by: NTom Herbert <tom@herbertland.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      32035585
  41. 26 8月, 2016 1 次提交