fs/nfs/super.c: In function ‘nfs_compare_remount_data’:
fs/nfs/super.c:2042:18: warning: comparison between signed and
    unsigned integer expressions [-Wsign-compare]
fs/nfs/super.c:2043:18: warning: comparison between signed and
    unsigned integer expressions [-Wsign-compare]
fs/nfs/super.c:2044:20: warning: comparison between signed and
    unsigned integer expressions [-Wsign-compare]
fs/nfs/super.c:2046:21: warning: comparison between signed and
    unsigned integer expressions [-Wsign-compare]
fs/nfs/super.c:2047:21: warning: comparison between signed and
    unsigned integer expressions [-Wsign-compare]
fs/nfs/super.c:2048:21: warning: comparison between signed and
    unsigned integer expressions [-Wsign-compare]
fs/nfs/super.c:2049:21: warning: comparison between signed and
    unsigned integer expressions [-Wsign-compare]
fs/nfs/super.c:2050:18: warning: comparison between signed and
    unsigned integer expressions [-Wsign-compare]

Seen with gcc (GCC) 4.6.3 20120306 (Red Hat 4.6.3-2).
Signed-off-by: NChuck Lever <chuck.lever@oracle.com>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

NSM RPC client can be required on NFSv3 umount, when child reaper is dying
(and destroying it's mount namespace). It means, that current nsproxy is set
to NULL already, but creation of RPC client requires UTS namespace for gaining
hostname string.

This patch creates reference-counted per-net NSM client on first monitor
request and destroys it after last unmonitor request.
Signed-off-by: NStanislav Kinsbursky <skinsbursky@parallels.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

Taking hostname from uts namespace if not safe, because this cuold be
performind during umount operation on child reaper death. And in this case
current->nsproxy is NULL already.
Signed-off-by: NStanislav Kinsbursky <skinsbursky@parallels.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

NSM RPC client can be required on NFSv3 umount, when child reaper is dying (and
destroying it's mount namespace). It means, that current nsproxy is set to
NULL already, but creation of RPC client requires UTS namespace for gaining
hostname string.
This patch introduces reference counted NFS RPC clients creation and
destruction helpers (similar to RPCBIND RPC clients).
Signed-off-by: NStanislav Kinsbursky <skinsbursky@parallels.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

Signed-off-by: NStanislav Kinsbursky <skinsbursky@parallels.com>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

This patch also introduces refcount-aware nfs_callback_down_net() wrapper for
svc_shutdown_net().
Signed-off-by: NStanislav Kinsbursky <skinsbursky@parallels.com>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

Signed-off-by: NStanislav Kinsbursky <skinsbursky@parallels.com>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

Signed-off-by: NStanislav Kinsbursky <skinsbursky@parallels.com>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

Usage coutner now increased only is the service was started sccessfully.
Even if service is running already, then goto is not required anymore, because
service creation and start will be skipped.
With this patch code looks clearer.
Signed-off-by: NStanislav Kinsbursky <skinsbursky@parallels.com>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

This is just a code move, which from my POW makes code looks better.
I.e. now on start we have 3 different stages:
1) Service creation.
2) Service per-net data allocation.
3) Service start.

Patch also renames goto label "out_err:" into "err_start:" to reflect new
changes.
Signed-off-by: NStanislav Kinsbursky <skinsbursky@parallels.com>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

No need to assign transports backchannel server explicitly in
nfs41_callback_up() -  there is nfs_callback_bc_serv() function for this.
By using it, nfs4_callback_up() and nfs41_callback_up() can be called without
transport argument.

Note: service have to be passed to nfs_callback_bc_serv() instead of callback,
since callback link can be uninitialized.
Signed-off-by: NStanislav Kinsbursky <skinsbursky@parallels.com>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

v4:
1) Callback transport creation routine selection by version simlified.

This new function in now called before nfs_minorversion_callback_svc_setup()).

Also few small changes:
1) current network namespace in nfs_callback_up() was replaced by transport net.
2) svc_shutdown_net() was moved prior to callback usage counter decrement
(because in case of per-net data allocation faulure svc_shutdown_net() have to
be skipped).
Signed-off-by: NStanislav Kinsbursky <skinsbursky@parallels.com>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

This function creates service if it's not exist, or increase usage counter of
the existent, and returns pointer to it.
Usage counter will be droppepd by svc_destroy() later in nfs_callback_up().
Signed-off-by: NStanislav Kinsbursky <skinsbursky@parallels.com>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

Signed-off-by: NStanislav Kinsbursky <skinsbursky@parallels.com>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

The OPEN operation has no way to differentiate an open for read and an
open for execution - both look like read to the server. This allowed
users to read files that didn't have READ access but did have EXEC access,
which is obviously wrong.

This patch adds an ACCESS call to the OPEN compound to handle the
difference between OPENs for reading and execution.  Since we're going
through the trouble of calling ACCESS, we check all possible access bits
and cache the results hopefully avoiding an ACCESS call in the future.
Signed-off-by: NWeston Andros Adamson <dros@netapp.com>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

This will allocate memory that has already been zeroed, allowing us to
remove the memset later on.
Signed-off-by: NBryan Schumaker <bjchuma@netapp.com>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

I put the client into an open recovery loop by:
	Client: Open file
		read half
	Server: Expire client (echo 0 > /sys/kernel/debug/nfsd/forget_clients)
	Client: Drop vm cache (echo 3 > /proc/sys/vm/drop_caches)
		finish reading file

This causes a loop because the client never updates the nfs4_state after
discovering that the delegation is invalid.  This means it will keep
trying to read using the bad delegation rather than attempting to re-open
the file.
Signed-off-by: NBryan Schumaker <bjschuma@netapp.com>
CC: stable@vger.kernel.org [3.4+]
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

If we are reading through a delegation, and the delegation is OK then
state->stateid will still point to a delegation stateid and not an open
stateid.
Signed-off-by: NBryan Schumaker <bjschuma@netapp.com>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

We shouldn't need more than 1 worker thread per cpu, since rpciod
is designed to run without sleeping in most cases.
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

Currently it does not do so if the RPC call failed to start. Fix is to
move the decrement of plh_block_lgets into nfs4_layoutreturn_release.

Also remove a redundant test of task->tk_status in nfs4_layoutreturn_done:
if lrp->res.lrs_present is set, then obviously the RPC call succeeded.
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

Failure of the layoutreturn allocation fails is not a good reason to
mark the pnfs_layout_hdr as having failed a layoutget or i/o. Just
exit cleanly.
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

It serves no purpose that the test for whether or not we have valid
layout segments doesn't already serve.
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

Once all the affected layout segments have been freed up, clear the
NFS_LAYOUT_BULK_RECALL flag so that we can reuse the pnfs_layout_hdr
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

We already have a mechanism for blocking LAYOUTGET by means of the
plh_block_lgets counter. The only "service" that NFS_LAYOUT_DESTROYED
provides at this point is to block layoutget once the layout segment
list is empty, which basically means that you have to wait until
the pnfs_layout_hdr is destroyed before you can do pNFS on that file
again.

This patch enables the reuse of the pnfs_layout_hdr if the layout
segment list is empty.
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

...and ditto for pnfs_free_layout_hdr()
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

These are all in static declared functions that are called only once.
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

Ensure that the reference count for pnfs_layout_hdr reverts to the
original value after a call to pnfs_layout_remove_lseg().

Note that the caller is expected to hold a reference to the struct
pnfs_layout_hdr.
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

There is no longer a need to use pnfs_free_lseg_list(). Just call
pnfs_free_lseg() directly.
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

Move the code into pnfs_free_layout_hdr(), and add checks to
get_layout_by_fh_locked to ensure that they don't reference a layout
that is being freed.
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

None of the existing pNFS layout drivers seem to require the inode
to be locked while they free the layout header.
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

Each layout segment already holds a reference to the pnfs_layout_hdr,
so there is no need to hold an extra reference that is released once
the last layout segment is freed.

Ensure that pnfs_find_alloc_layout() always returns a reference
to the pnfs_layout_hdr, which will be matched by the final call to
pnfs_put_layout_hdr() in pnfs_update_layout().
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

The latter name is more descriptive of the actual function.
Also rename pnfs_insert_layout to pnfs_layout_insert_lseg.
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

Instead of resetting the inode MDS threshold counters when we mark
the layout for destruction, do it as part of freeing the layout.
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

In all cases where we set NFS_LAYOUT_INVALID, we also set NFS_LAYOUT_DESTROYED.
Furthermore, in all cases where we test for NFS_LAYOUT_INVALID, we should
also be testing for NFS_LAYOUT_DESTROYED, since the latter means that
we hold no valid layout segments.
Ergo the two are redundant.
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

Confine it to the nfs4_do_close() code.
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

If we sleep after dropping the inode->i_lock, then we are no longer
atomic with respect to the rpc_wake_up() call in pnfs_layout_remove_lseg().
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

If pnfs_layout_io_test_failed() authorises a retry of the failed layoutgets,
we should clear the existing layout segments so that we start afresh. Do
this in pnfs_layout_io_set_failed().
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

We want to cache the pnfs_layout_hdr after a layoutget or i/o
failure so that pnfs_update_layout() can find it and know when
it is time to retry.
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

If we exit after the call to pnfs_find_alloc_layout(), we have to ensure
that we put the struct pnfs_layout_hdr.
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

In cases where the pNFS data server is just temporarily out of service,
we want to mark it as such, and then try again later. Typically that will
be in cases of network connection errors etc.
This patch allows us to mark the devices as being "unavailable" for such
transient errors, and will make them available for retries after a
2 minute timeout period.
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>