- 14 5月, 2012 2 次提交
-
-
由 Sakari Ailus 提交于
Add image source control class. This control class is intended to contain low level controls which deal with control of the image capture process --- the A/D converter in image sensors, for example. Signed-off-by: NSakari Ailus <sakari.ailus@iki.fi> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Sakari Ailus 提交于
V4L2 uses the enum type in IOCTL arguments in IOCTLs that were defined until the use of enum was considered less than ideal. Recently Rémi Denis-Courmont brought up the issue by proposing a patch to convert the enums to unsigned: <URL:http://www.spinics.net/lists/linux-media/msg46167.html> This sparked a long discussion where another solution to the issue was proposed: two sets of IOCTL structures, one with __u32 and the other with enums, and conversion code between the two: <URL:http://www.spinics.net/lists/linux-media/msg47168.html> Both approaches implement a complete solution that resolves the problem. The first one is simple but requires assuming enums and __u32 are the same in size (so we won't break the ABI) while the second one is more complex and less clean but does not require making that assumption. The issue boils down to whether enums are fundamentally different from __u32 or not, and can the former be substituted by the latter. During the discussion it was concluded that the __u32 has the same size as enums on all archs Linux is supported: it has not been shown that replacing those enums in IOCTL arguments would break neither source or binary compatibility. If no such reason is found, just replacing the enums with __u32s is the way to go. This is what this patch does. This patch is slightly different from Remi's first RFC (link above): it uses __u32 instead of unsigned and also changes the arguments of VIDIOC_G_PRIORITY and VIDIOC_S_PRIORITY. Signed-off-by: NRémi Denis-Courmont <remi@remlab.net> Signed-off-by: NSakari Ailus <sakari.ailus@iki.fi> Acked-by: NHans Verkuil <hans.verkuil@cisco.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
- 02 5月, 2012 1 次提交
-
-
由 Hans Verkuil 提交于
V4L2_CID_JPEG_COMPRESION_QUALITY -> V4L2_CID_JPEG_COMPRESSION_QUALITY Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
- 11 4月, 2012 5 次提交
-
-
由 Sylwester Nawrocki 提交于
This patch fixes following compilation warning: Error: no ID for constraint linkend: v4l2-jpeg-chroma-subsampling. and adds missing JPEG control class at the Table A.58. Signed-off-by: NSylwester Nawrocki <sylvester.nawrocki@gmail.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Sakari Ailus 提交于
These two IOCTLS are obsoleted by VIDIOC_SUBDEV_G_SELECTION and VIDIOC_SUBDEV_S_SELECTION. Mark them obsolete. Signed-off-by: NSakari Ailus <sakari.ailus@iki.fi> Acked-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Sakari Ailus 提交于
Add documentation for V4L2 subdev selection API. This changes also experimental V4L2 subdev API so that scaling now works through selection API only. Signed-off-by: NSakari Ailus <sakari.ailus@iki.fi> Acked-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Sakari Ailus 提交于
Add svga and dia files for V4L2 subdev selections documentation. Signed-off-by: NSakari Ailus <sakari.ailus@iki.fi> Acked-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Sakari Ailus 提交于
Signed-off-by: NSakari Ailus <sakari.ailus@iki.fi> Acked-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
- 23 3月, 2012 1 次提交
-
-
由 Jason Wessel 提交于
Sometimes it is desirable to stop the kernel debugger before allowing a system to reboot either with kdb or kgdb. This patch adds the ability to turn the reboot notifier on and off or enter the debugger and stop kernel execution before rebooting. It is possible to change the setting after booting the kernel with the following: echo 1 > /sys/module/debug_core/parameters/kgdbreboot It is also possible to change this setting using kdb / kgdb to manipulate the variable directly. Using KDB: mm kgdbreboot 1 Using gdb: set kgdbreboot=1 Reported-by: NJan Kiszka <jan.kiszka@siemens.com> Signed-off-by: NJason Wessel <jason.wessel@windriver.com>
-
- 20 3月, 2012 1 次提交
-
-
由 Sylwester Nawrocki 提交于
Make the VIDIOC_G/S_SELECTION ioctls documentation more consistent with the rest of media Docbook, use capital letters where necessary and correct few minor errors. Signed-off-by: NSylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
- 19 3月, 2012 1 次提交
-
-
由 Hans Verkuil 提交于
This is a small extension to the S_HW_FREQ_SEEK ioctl: if the wrap_around value is not support by the hardware, then -EINVAL is returned. Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
- 08 3月, 2012 1 次提交
-
-
由 Hans Verkuil 提交于
Here is a small patch which fixes a DocBook mistake in the decoder_cmd documentation. Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
- 07 3月, 2012 1 次提交
-
-
由 Masanari Iida 提交于
Signed-off-by: NMasanari Iida <standby24x7@gmail.com> Acked-by: NRandy Dunlap <rdunlap@xenotime.net> Signed-off-by: NJiri Kosina <jkosina@suse.cz>
-
- 29 2月, 2012 1 次提交
-
-
由 Sylwester Nawrocki 提交于
Add DocBook entries for the JPEG control class. Signed-off-by: NSylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
- 28 2月, 2012 2 次提交
-
-
由 Michael Opdenacker 提交于
The text for version 1.1 of the Open Sofware license doesn't seem to be available anywhere on http://www.opensource.org/ any more. Replace it with an URL on fedora.org. Thanks to Randy Dunlap for his advise choosing the most appropriate replacement URL. Signed-off-by: NMichael Opdenacker <michael.opdenacker@free-electrons.com> Signed-off-by: NJiri Kosina <jkosina@suse.cz>
-
由 Michael Opdenacker 提交于
Fix broken link in Documentation/filesystem, replacing ftp://ftp.uk.linux.org/pub/linux/sct/fs/jfs/journal-design.ps.gz by a URL on http://kernel.org Thanks to Randy Dunlap for his advise on the best replacement URL to use. Signed-off-by: NMichael Opdenacker <michael.opdenacker@free-electrons.com> Signed-off-by: NJiri Kosina <jkosina@suse.cz>
-
- 14 2月, 2012 2 次提交
-
-
由 Hans Verkuil 提交于
Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Hans Verkuil 提交于
Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
- 07 2月, 2012 1 次提交
-
-
由 Johannes Berg 提交于
To track authenticated state seems to have been a design mistake in cfg80211. It is possible to have out of band authentication (FT), tracking multiple authentications caused more problems than it ever helped, and the implementation in mac80211 is too complex. Remove all this complexity, and let userspace do whatever it wants to, mac80211 can deal with that just fine. Association is still tracked of course, but authentication no longer is. Local auth state changes are thus no longer of value, so ignore them completely. This will also help implement SAE -- asking the driver to do an authentication is now almost equivalent to sending an authentication frame, with the exception of shared key authentication which is still handled completely. Signed-off-by: NJohannes Berg <johannes.berg@intel.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
- 03 2月, 2012 1 次提交
-
-
由 Randy Dunlap 提交于
Fix 2 fatal errors in the device-drivers docbook. Also add some missing files from drivers/base/; since several of these are DMA-related, add a section for DMA Management. docproc: drivers/base/sys.c: No such file or directory docproc: drivers/tty/serial/8250.c: No such file or directory Signed-off-by: NRandy Dunlap <rdunlap@xenotime.net> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
- 02 2月, 2012 1 次提交
-
-
由 Randy Dunlap 提交于
Fix 2 fatal errors in the device-drivers docbook. Also add some missing files from drivers/base/; since several of these are DMA-related, add a section for DMA Management. docproc: drivers/base/sys.c: No such file or directory docproc: drivers/tty/serial/8250.c: No such file or directory Signed-off-by: NRandy Dunlap <rdunlap@xenotime.net> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 25 1月, 2012 1 次提交
-
-
由 Randy Dunlap 提交于
Fix new kernel-doc warning. This file no longer contains kernel-doc comments. Warning(include/linux/serial_core.h): no structured comments found Signed-off-by: NRandy Dunlap <rdunlap@xenotime.net> Cc: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
- 24 1月, 2012 4 次提交
-
-
由 Hans Verkuil 提交于
If V4L2_CAP_DEVICE_CAPS is set, then the new device_caps field is filled with the capabilities of the opened device node. The capabilities field traditionally contains the capabilities of the physical device, being a superset of all capabilities available at the several device nodes. E.g., if you open /dev/video0, then if it contains VBI caps then that means that there is a corresponding vbi node as well. And the capabilities field of both the video and vbi nodes should contain identical caps. However, it would be very useful to also have a capabilities field that contains just the caps for the currently open device, hence the new CAP bit and field. Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Randy Dunlap 提交于
Fix warning since kernel scheduler functions and kernel-doc notation were moved to other files. docproc: lnx-33-rc1/kernel/sched.c: No such file or directory Signed-off-by: NRandy Dunlap <rdunlap@xenotime.net> Cc: Ingo Molnar <mingo@elte.hu> Cc: Peter Zijlstra <peterz@infradead.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Randy Dunlap 提交于
Fix warning since kernel-doc comments were moved to another source file. Warning(lib/iomap.c): no structured comments found Signed-off-by: NRandy Dunlap <rdunlap@xenotime.net> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Randy Dunlap 提交于
Fix new kernel-doc warning. This file no longer contains kernel-doc comments. Warning(include/linux/serial_core.h): no structured comments found Signed-off-by: NRandy Dunlap <rdunlap@xenotime.net> Cc: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 17 1月, 2012 3 次提交
-
-
由 Mauro Carvalho Chehab 提交于
On ISDB-T, each layer can have its own independent modulation, applied to the carriers that belong to the segments associated with them. So, there's no sense to define a global modulation parameter. Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Mauro Carvalho Chehab 提交于
The ISDB-T differs on its way to implement the hierarchical transmissions: instead of using a low-priority/high-priority FEC codes, it does that by using different layers, each layer with their groups of segments. So, those parameters don't make sense for ISDB-T. Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Mauro Carvalho Chehab 提交于
The units for DTV_FREQUENCY are kHz for satellital delivery systems (DVB-S/DVB-S2/DVB-TURBO/ISDB-S). Fix it at the API spec. Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
- 16 1月, 2012 4 次提交
-
-
由 Hans Verkuil 提交于
As per the feature removal document, make the tuner type check more strict so that it is no longer possible to set the radio frequency through a video node or the TV frequency through a radio node. Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Hans Verkuil 提交于
As Rupert pointed out, the phrase "It is good practice" should be replaced with "You must". Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com> Cc: Rupert Eibauer <Rupert.Eibauer@ces.ch> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Hans Verkuil 提交于
Update the spec to the behavior implemented by the control framework. This should have been documented long ago but for some reason it was never done. Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Hans Verkuil 提交于
Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
- 11 1月, 2012 3 次提交
-
-
由 Tomasz Stanislawski 提交于
Pixels were preferred units for selection rectangles over driver-dependent units for almost all use cases. Therefore the units were fixed to pixels. Signed-off-by: NTomasz Stanislawski <t.stanislaws@samsung.com> Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Tomasz Stanislawski 提交于
This patch adds a documentation for VIDIOC_{G/S}_SELECTION ioctl. Moreover, the patch adds the description of modeling of composing, cropping and scaling features in V4L2. Finally, some examples are presented. Signed-off-by: NTomasz Stanislawski <t.stanislaws@samsung.com> Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Tomasz Stanislawski 提交于
This patch adds images in binary format for the V4L2 selection API. Signed-off-by: NTomasz Stanislawski <t.stanislaws@samsung.com> Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
- 06 1月, 2012 1 次提交
-
-
由 Theodore Kilgore 提交于
Written by Theodore Kilgore With minor changes by Hans de Goede: -Code style fixes -Correct the verbose level on various PDEBUG messages -Make error messages use pr_err instead of PDEBUG -Document the jl20 pixel format Signed-off-by: NTheodore Kilgore <kilgota@auburn.edu> Signed-off-by: NHans de Goede <hdegoede@redhat.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
- 05 1月, 2012 2 次提交
-
-
由 Carlos Chinea 提交于
Add an entry for HSI in the device-drivers section of the kernel documentation. Signed-off-by: NCarlos Chinea <carlos.chinea@nokia.com>
-
由 Mauro Carvalho Chehab 提交于
Mark info.type as deprecated inside the header, recommending the usage of DTV_ENUM_DELSYS DVBv5 command instead. Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
- 31 12月, 2011 1 次提交
-
-
由 Sylwester Nawrocki 提交于
The V4L2_CID_ALPHA_COMPONENT control is intended for the video capture or memory-to-memory devices that are capable of setting up the per-pixel alpha component to some arbitrary value. It allows to set the alpha component for all pixels to an arbitrary value. Signed-off-by: NSylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com> Acked-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-