All other calls to allocate memory seem to make some noise already, with the
exception of two calls (for gop, uga) in the setup_graphics path.

The purpose is to be noisy on worrysome errors immediately.

commit fb86b244 ("x86/efi: Add better error logging to EFI boot
stub") introduces printing false alarms for lots of hardware. Rather
than playing Whack a Mole with non-fatal exit conditions, try the other
way round.

This is per Matt Fleming's suggestion:

> Where I think we could improve things
> is by adding efi_printk() message in certain error paths. Clearly, not
> all error paths need such messages, e.g. the EFI_INVALID_PARAMETER path
> you highlighted above, but it makes sense for memory allocation and PCI
> read failures.

Link: http://article.gmane.org/gmane.linux.kernel.efi/4628Signed-off-by: NAndre Müller <andre.muller@web.de>
Cc: Ulf Winkelvos <ulf@winkelvos.de>
Signed-off-by: NMatt Fleming <matt.fleming@intel.com>

We need a way to customize the behaviour of the EFI boot stub, in
particular, we need a way to disable the "chunking" workaround, used
when reading files from the EFI System Partition.

One of my machines doesn't cope well when reading files in 1MB chunks to
a buffer above the 4GB mark - it appears that the "chunking" bug
workaround triggers another firmware bug. This was only discovered with
commit 4bf7111f ("x86/efi: Support initrd loaded above 4G"), and
that commit is perfectly valid. The symptom I observed was a corrupt
initrd rather than any kind of crash.

efi= is now used to specify EFI parameters in two very different
execution environments, the EFI boot stub and during kernel boot.

There is also a slight performance optimization by enabling efi=nochunk,
but that's offset by the fact that you're more likely to run into
firmware issues, at least on x86. This is the rationale behind leaving
the workaround enabled by default.

Also provide some documentation for EFI_READ_CHUNK_SIZE and why we're
using the current value of 1MB.
Tested-by: NArd Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Roy Franz <roy.franz@linaro.org>
Cc: Maarten Lankhorst <m.b.lankhorst@gmail.com>
Cc: Leif Lindholm <leif.lindholm@linaro.org>
Cc: Borislav Petkov <bp@suse.de>
Signed-off-by: NMatt Fleming <matt.fleming@intel.com>

Building 32-bit threw a warning on kASLR enabled builds:

arch/x86/boot/compressed/aslr.c: In function ‘mem_avoid_overlap’:
arch/x86/boot/compressed/aslr.c:198:17: warning: cast from pointer to integer of different size [-Wpointer-to-int-cast]
   avoid.start = (u64)ptr;
                 ^

This fixes the warning; unsigned long should have been used here.
Signed-off-by: NKees Cook <keescook@chromium.org>
Link: http://lkml.kernel.org/r/20141001183632.GA11431@www.outflux.netSigned-off-by: NH. Peter Anvin <hpa@linux.intel.com>

If we're executing the 32-bit efi_char16_printk() code path (i.e.
running on top of 32-bit firmware) we know that efi_early->text_output
will be a 32-bit value, even though ->text_output has type u64.

Unfortunately, we currently pass ->text_output directly to
efi_early->call() so for CONFIG_X86_32 the compiler will push a 64-bit
value onto the stack, causing the other parameters to be misaligned.

The way we handle this in the rest of the EFI boot stub is to pass
pointers as arguments to efi_early->call(), which automatically do the
right thing (pointers are 32-bit on CONFIG_X86_32, and we simply ignore
the upper 32-bits of the argument register if running in 64-bit mode
with 32-bit firmware).

This fixes a corruption bug when printing strings from the 32-bit EFI
boot stub.

Link: https://bugzilla.kernel.org/show_bug.cgi?id=84241Signed-off-by: NMatt Fleming <matt.fleming@intel.com>

A number of people are reporting seeing the "setup_efi_pci() failed!"
error message in what used to be a quiet boot,

  https://bugzilla.kernel.org/show_bug.cgi?id=81891

The message isn't all that helpful because setup_efi_pci() can return a
non-success error code for a variety of reasons, not all of them fatal.

Let's drop the return code from setup_efi_pci*() altogether, since
there's no way to process it in any meaningful way outside of the inner
__setup_efi_pci*() functions.
Reported-by: NDarren Hart <dvhart@linux.intel.com>
Reported-by: NJosh Boyer <jwboyer@fedoraproject.org>
Cc: Ulf Winkelvos <ulf@winkelvos.de>
Cc: Andre Müller <andre.muller@web.de>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: NMatt Fleming <matt.fleming@intel.com>

This reverts commit f23cf8bd ("efi/x86: efistub: Move shared
dependencies to <asm/efi.h>") as well as the x86 parts of commit
f4f75ad5 ("efi: efistub: Convert into static library").

The road leading to these two reverts is long and winding.

The above two commits were merged during the v3.17 merge window and
turned the common EFI boot stub code into a static library. This
necessitated making some symbols global in the x86 boot stub which
introduced new entries into the early boot GOT.

The problem was that we weren't fixing up the newly created GOT entries
before invoking the EFI boot stub, which sometimes resulted in hangs or
resets. This failure was reported by Maarten on his Macbook pro.

The proposed fix was commit 9cb0e394 ("x86/efi: Fixup GOT in all
boot code paths"). However, that caused issues for Linus when booting
his Sony Vaio Pro 11. It was subsequently reverted in commit
f3670394.

So that leaves us back with Maarten's Macbook pro not booting.

At this stage in the release cycle the least risky option is to revert
the x86 EFI boot stub to the pre-merge window code structure where we
explicitly #include efi-stub-helper.c instead of linking with the static
library. The arm64 code remains unaffected.

We can take another swing at the x86 parts for v3.18.

Conflicts:
	arch/x86/include/asm/efi.h
Tested-by: NJosh Boyer <jwboyer@fedoraproject.org>
Tested-by: NMaarten Lankhorst <maarten.lankhorst@canonical.com>
Tested-by: Leif Lindholm <leif.lindholm@linaro.org> [arm64]
Tested-by: NLinus Torvalds <torvalds@linux-foundation.org>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>,
Cc: Ingo Molnar <mingo@kernel.org>
Signed-off-by: NMatt Fleming <matt.fleming@intel.com>

This reverts commit 9cb0e394.

It causes my Sony Vaio Pro 11 to immediately reboot at startup.
Acked-by: NIngo Molnar <mingo@kernel.org>
Cc: Peter Anvin <hpa@zytor.com>
Cc: Maarten Lankhorst <maarten.lankhorst@canonical.com>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Matt Fleming <matt.fleming@intel.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The KASLR location-choosing logic needs to avoid the setup_data
list memory areas as well. Without this, it would be possible to
have the ASLR position stomp on the memory, ultimately causing
the boot to fail.
Signed-off-by: NKees Cook <keescook@chromium.org>
Tested-by: NBaoquan He <bhe@redhat.com>
Cc: stable@vger.kernel.org
Cc: Vivek Goyal <vgoyal@redhat.com>
Cc: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Cc: Wei Yongjun <yongjun_wei@trendmicro.com.cn>
Cc: Pavel Machek <pavel@ucw.cz>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: http://lkml.kernel.org/r/20140911161931.GA12001@www.outflux.netSigned-off-by: NIngo Molnar <mingo@kernel.org>

Maarten reported that his Macbook pro 8.2 stopped booting after commit
f23cf8bd ("efi/x86: efistub: Move shared dependencies to
<asm/efi.h>"), the main feature of which is changing the visibility of
symbol 'efi_early' from local to global.

By making 'efi_early' global we end up requiring an entry in the Global
Offset Table. Unfortunately, while we do include code to fixup GOT
entries in the early boot code, it's only called after we've executed
the EFI boot stub.

What this amounts to is that references to 'efi_early' in the EFI boot
stub don't point to the correct place.

Since we've got multiple boot entry points we need to be prepared to
fixup the GOT in multiple places, while ensuring that we never do it
more than once, otherwise the GOT entries will still point to the wrong
place.
Reported-by: NMaarten Lankhorst <maarten.lankhorst@canonical.com>
Tested-by: NMaarten Lankhorst <maarten.lankhorst@canonical.com>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: NMatt Fleming <matt.fleming@intel.com>

Mantas found that after commit 4bf7111f ("x86/efi: Support initrd
loaded above 4G"), the kernel freezes at the earliest possible moment
when trying to boot via UEFI on Asus laptop.

Revert to old way to load initrd under 4G on first try, second try will
use above 4G buffer when initrd is too big and does not fit under 4G.

[ The cause of the freeze appears to be a firmware bug when reading
  file data into buffers above 4GB, though the exact reason is unknown.
  Mantas reports that the hang can be avoid if the file size is a
  multiple of 512 bytes, but I've seen some ASUS firmware simply
  corrupting the file data rather than freezing.

  Laszlo fixed an issue in the upstream EDK2 DiskIO code in Aug 2013
  which may possibly be related, commit 4e39b75e ("MdeModulePkg/DiskIoDxe:
  fix source/destination pointer of overrun transfer").

  Whatever the cause, it's unlikely that a fix will be forthcoming
  from the vendor, hence the workaround - Matt ]

Cc: Laszlo Ersek <lersek@redhat.com>
Reported-by: NMantas Mikulėnas <grawity@gmail.com>
Reported-by: NHarald Hoyer <harald@redhat.com>
Tested-by: NAnders Darander <anders@chargestorm.se>
Tested-by: NCalvin Walton <calvin.walton@kepstin.ca>
Signed-off-by: NYinghai Lu <yinghai@kernel.org>
Signed-off-by: NMatt Fleming <matt.fleming@intel.com>

All the code in early_serial_console.c gets compiled out if
!CONFIG_EARLY_PRINTK, but early_serial_console.o itself still gets
compiled in.  Eliminate it from the compile entirely in that case.

This does not change the generated code at all, in either case.
Signed-off-by: NJosh Triplett <josh@joshtriplett.org>

All the code in aslr.c gets compiled out if !CONFIG_RANDOMIZE_BASE, but
aslr.o itself still gets compiled in.  Eliminate it from the compile
entirely in that case.

This does not change the generated code at all, in either case.
Signed-off-by: NJosh Triplett <josh@joshtriplett.org>

Switch VMLINUX_OBJS to vmlinux-objs-y, to eliminate Makefile
conditionals in favor of vmlinux-objs-$(CONFIG_*) constructs.

This does not change the generated code at all.
Signed-off-by: NJosh Triplett <josh@joshtriplett.org>

Hopefully this will enable us to better debug:
https://bugzilla.kernel.org/show_bug.cgi?id=68761Signed-off-by: NUlf Winkelvos <ulf@winkelvos.de>
Signed-off-by: NMatt Fleming <matt.fleming@intel.com>

This patch changes both x86 and arm64 efistub implementations
from #including shared .c files under drivers/firmware/efi to
building shared code as a static library.

The x86 code uses a stub built into the boot executable which
uncompresses the kernel at boot time. In this case, the library is
linked into the decompressor.

In the arm64 case, the stub is part of the kernel proper so the library
is linked into the kernel proper as well.
Signed-off-by: NArd Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: NMatt Fleming <matt.fleming@intel.com>

In order to move from the #include "../../../xxxxx.c" anti-pattern used
by both the x86 and arm64 versions of the stub to a static library
linked into either the kernel proper (arm64) or a separate boot
executable (x86), there is some prepatory work required.

This patch does the following:
- move forward declarations of functions shared between the arch
  specific and the generic parts of the stub to include/linux/efi.h
- move forward declarations of functions shared between various .c files
  of the generic stub code to a new local header file called "efistub.h"
- add #includes to all .c files which were formerly relying on the
  #includor to include the correct header files
- remove all static modifiers from functions which will need to be
  externally visible once we move to a static library
Signed-off-by: NArd Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: NMatt Fleming <matt.fleming@intel.com>

This moves definitions depended upon both by code under arch/x86/boot
and under drivers/firmware/efi to <asm/efi.h>. This is in preparation of
turning the stub code under drivers/firmware/efi into a static library.
Signed-off-by: NArd Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: NMatt Fleming <matt.fleming@intel.com>

For boot efi kernel directly without bootloader.
If the kernel support XLF_CAN_BE_LOADED_ABOVE_4G, we should
not limit initrd under hdr->initrd_add_max.
Signed-off-by: NYinghai Lu <yinghai@kernel.org>
Signed-off-by: NMatt Fleming <matt.fleming@intel.com>

Changes kASLR from being compile-time selectable (blocked by
CONFIG_HIBERNATION), to being boot-time selectable (with hibernation
available by default) via the "kaslr" kernel command line.
Signed-off-by: NKees Cook <keescook@chromium.org>
Acked-by: NPavel Machek <pavel@ucw.cz>
Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>

Given the fact that we removed inclusion of boot.h from boot/string.c
does not look like we need misc.h inclusion in compressed/string.c. So
remove it.

misc.h was also pulling in string_32.h which in turn had macros for
memcmp and memcpy. So we don't need to #undef memcmp and memcpy anymore.
Signed-off-by: NVivek Goyal <vgoyal@redhat.com>
Link: http://lkml.kernel.org/r/1398447972-27896-3-git-send-email-vgoyal@redhat.comSigned-off-by: NH. Peter Anvin <hpa@zytor.com>

As requested by Linus add explicit __visible to the asmlinkage users.
This marks all functions visible to assembler.

Tree sweep for arch/x86/*
Signed-off-by: NAndi Kleen <ak@linux.intel.com>
Link: http://lkml.kernel.org/r/1398984278-29319-3-git-send-email-andi@firstfloor.orgSigned-off-by: NH. Peter Anvin <hpa@linux.intel.com>

We really only need one phys and one virt function call, and then only
one assembly function to make firmware calls.

Since we are not using the C type system anyway, we're not really losing
much by deleting the macros apart from no longer having a check that
we are passing the correct number of parameters. The lack of duplicated
code seems like a worthwhile trade-off.

Cc: Ricardo Neri <ricardo.neri-calderon@linux.intel.com>
Cc: Borislav Petkov <bp@suse.de>
Signed-off-by: NMatt Fleming <matt.fleming@intel.com>

Instead of truncating UTF-16 assuming all characters is ASCII,
properly convert it to UTF-8.
Signed-off-by: NH. Peter Anvin <hpa@linux.intel.com>
[ Bug and style fixes. ]
Signed-off-by: NRoy Franz <roy.franz@linaro.org>
Signed-off-by: NLeif Lindholm <leif.lindholm@linaro.org>
Signed-off-by: NMatt Fleming <matt.fleming@intel.com>

We're currently passing the file handle for the root file system to
efi_file_read() and efi_file_close(), instead of the file handle for the
file we wish to read/close.

While this has worked up until now, it seems that it has only been by
pure luck. Olivier explains,

 "The issue is the UEFI Fat driver might return the same function for
  'fh->read()' and 'h->read()'. While in our case it does not work with
  a different implementation of EFI_SIMPLE_FILE_SYSTEM_PROTOCOL. In our
  case, we return a different pointer when reading a directory and
  reading a file."

Fixing this actually clears up the two functions because we can drop one
of the arguments, and instead only pass a file 'handle' argument.
Reported-by: NOlivier Martin <olivier.martin@arm.com>
Reviewed-by: NOlivier Martin <olivier.martin@arm.com>
Reviewed-by: NMark Rutland <mark.rutland@arm.com>
Cc: Leif Lindholm <leif.lindholm@linaro.org>
Signed-off-by: NMatt Fleming <matt.fleming@intel.com>

code32_start should point at the start of the protected mode code, and
*not* at the beginning of the bzImage. This is much easier to do in
assembly so document that callers of make_boot_params() need to fill out
code32_start.

The fallout from this bug is that we would end up relocating the image
but copying the image at some offset, resulting in what appeared to be
memory corruption.
Reported-by: NThomas Bächler <thomas@archlinux.org>
Signed-off-by: NMatt Fleming <matt.fleming@intel.com>

commit 54b52d87 ("x86/efi: Build our own EFI services pointer
table") introduced a regression because the 64-bit file_size()
implementation passed a pointer to a 32-bit data object, instead of a
pointer to a 64-bit object.

Because the firmware treats the object as 64-bits regardless it was
reading random values from the stack for the upper 32-bits.

This resulted in people being unable to boot their machines, after
seeing the following error messages,

    Failed to get file info size
    Failed to alloc highmem for files
Reported-by: NDzmitry Sledneu <dzmitry.sledneu@gmail.com>
Reported-by: NKoen Kooi <koen@dominion.thruhere.net>
Tested-by: NKoen Kooi <koen@dominion.thruhere.net>
Signed-off-by: NMatt Fleming <matt.fleming@intel.com>

The ARM EFI boot stub doesn't need to care about the efi_early
infrastructure that x86 requires in order to do mixed mode thunking. So
wrap everything up in an efi_call_early() macro.

This allows x86 to do the necessary indirection jumps to call whatever
firmware interface is necessary (native or mixed mode), but also allows
the ARM folks to mask the fact that they don't support relocation in the
boot stub and need to pass 'sys_table_arg' to every function.

[ hpa: there are no object code changes from this patch ]
Signed-off-by: NMatt Fleming <matt.fleming@intel.com>
Link: http://lkml.kernel.org/r/20140326091011.GB2958@console-pimps.org
Cc: Roy Franz <roy.franz@linaro.org>
Signed-off-by: NH. Peter Anvin <hpa@linux.intel.com>

Currently compressed/misc.c needs to link against memset(). I think one of
the reasons of this need is inclusion of various header files which define
static inline functions and use memset() inside these. For example,
include/linux/bitmap.h

I think trying to include "../string.h" and using builtin version of memset
does not work because by the time "#define memset" shows up, it is too
late. Some other header file has already used memset() and expects to
find a definition during link phase.

Currently we have a C definitoin of memset() in misc.c. Move it to
compressed/string.c so that others can use it if need be.
Signed-off-by: NVivek Goyal <vgoyal@redhat.com>
Link: http://lkml.kernel.org/r/1395170800-11059-6-git-send-email-vgoyal@redhat.comSigned-off-by: NH. Peter Anvin <hpa@linux.intel.com>

Try to treat memcmp() in same way as memcpy() and memset(). Provide a
declaration in boot/string.h and by default user gets a memcmp() which
maps to builtin function.

Move optimized definition of memcmp() in boot/string.c. Now a user can
do #undef memcmp and link against string.c to use optimzied memcmp().

It also simplifies boot/compressed/string.c where we had to redefine
memcmp(). That extra definition is gone now.
Signed-off-by: NVivek Goyal <vgoyal@redhat.com>
Link: http://lkml.kernel.org/r/1395170800-11059-5-git-send-email-vgoyal@redhat.comSigned-off-by: NH. Peter Anvin <hpa@linux.intel.com>

Move optimized versions of memcpy to compressed/string.c This will allow
any other code to use these functions too if need be in future. Again
trying to put definition in a common place instead of hiding it in misc.c
Signed-off-by: NVivek Goyal <vgoyal@redhat.com>
Link: http://lkml.kernel.org/r/1395170800-11059-4-git-send-email-vgoyal@redhat.comSigned-off-by: NH. Peter Anvin <hpa@linux.intel.com>

With CONFIG_X86_32=y, string_32.h gets pulled in compressed/string.c by
"misch.h". string_32.h defines a macro to map memcmp to __builtin_memcmp().
And that macro in turn changes the name of memcmp() defined here and
converts it to __builtin_memcmp().

I thought that's not the intention though. We probably want to provide
our own optimized definition of memcmp(). If yes, then undef the memcmp
before we define a new memcmp.
Signed-off-by: NVivek Goyal <vgoyal@redhat.com>
Link: http://lkml.kernel.org/r/1395170800-11059-2-git-send-email-vgoyal@redhat.comSigned-off-by: NH. Peter Anvin <hpa@linux.intel.com>

The kbuild test robot reported the following errors, introduced with
commit 54b52d87 ("x86/efi: Build our own EFI services pointer
table"),

 arch/x86/boot/compressed/head_32.o: In function `efi32_config':
>> (.data+0x58): undefined reference to `efi_call_phys'

 arch/x86/boot/compressed/head_64.o: In function `efi64_config':
>> (.data+0x90): undefined reference to `efi_call6'

Wrap the efi*_config structures in #ifdef CONFIG_EFI_STUB so that we
don't make references to EFI functions if they're not compiled in.
Signed-off-by: NMatt Fleming <matt.fleming@intel.com>

Some EFI firmware makes use of the FPU during boottime services and
clearing X86_CR4_OSFXSR by overwriting %cr4 causes the firmware to
crash.

Add the PAE bit explicitly instead of trashing the existing contents,
leaving the rest of the bits as the firmware set them.

Cc: H. Peter Anvin <hpa@zytor.com>
Signed-off-by: NMatt Fleming <matt.fleming@intel.com>

The EFI handover code only works if the "bitness" of the firmware and
the kernel match, i.e. 64-bit firmware and 64-bit kernel - it is not
possible to mix the two. This goes against the tradition that a 32-bit
kernel can be loaded on a 64-bit BIOS platform without having to do
anything special in the boot loader. Linux distributions, for one thing,
regularly run only 32-bit kernels on their live media.

Despite having only one 'handover_offset' field in the kernel header,
EFI boot loaders use two separate entry points to enter the kernel based
on the architecture the boot loader was compiled for,

    (1) 32-bit loader: handover_offset
    (2) 64-bit loader: handover_offset + 512

Since we already have two entry points, we can leverage them to infer
the bitness of the firmware we're running on, without requiring any boot
loader modifications, by making (1) and (2) valid entry points for both
CONFIG_X86_32 and CONFIG_X86_64 kernels.

To be clear, a 32-bit boot loader will always use (1) and a 64-bit boot
loader will always use (2). It's just that, if a single kernel image
supports (1) and (2) that image can be used with both 32-bit and 64-bit
boot loaders, and hence both 32-bit and 64-bit EFI.

(1) and (2) must be 512 bytes apart at all times, but that is already
part of the boot ABI and we could never change that delta without
breaking existing boot loaders anyhow.
Signed-off-by: NMatt Fleming <matt.fleming@intel.com>

Make the decision which code path to take at runtime based on
efi_early->is64.
Signed-off-by: NMatt Fleming <matt.fleming@intel.com>

Implement the transition code to go from IA32e mode to protected mode in
the EFI boot stub. This is required to use 32-bit EFI services from a
64-bit kernel.

Since EFI boot stub is executed in an identity-mapped region, there's
not much we need to do before invoking the 32-bit EFI boot services.
However, we do reload the firmware's global descriptor table
(efi32_boot_gdt) in case things like timer events are still running in
the firmware.
Signed-off-by: NMatt Fleming <matt.fleming@intel.com>

It's not possible to dereference the EFI System table directly when
booting a 64-bit kernel on a 32-bit EFI firmware because the size of
pointers don't match.

In preparation for supporting the above use case, build a list of
function pointers on boot so that callers don't have to worry about
converting pointer sizes through multiple levels of indirection.
Signed-off-by: NMatt Fleming <matt.fleming@intel.com>

The traditional approach of using machine-specific types such as
'unsigned long' does not allow the kernel to interact with firmware
running in a different CPU mode, e.g. 64-bit kernel with 32-bit EFI.

Add distinct EFI structure definitions for both 32-bit and 64-bit so
that we can use them in the 32-bit and 64-bit code paths.
Acked-by: NBorislav Petkov <bp@suse.de>
Signed-off-by: NMatt Fleming <matt.fleming@intel.com>

This silences build warnings about unexported variables and functions.
Signed-off-by: NKees Cook <keescook@chromium.org>
Link: http://lkml.kernel.org/r/20140209215644.GA30339@www.outflux.netSigned-off-by: NH. Peter Anvin <hpa@linux.intel.com>

Remove including <linux/version.h> that don't need it.
Signed-off-by: NWei Yongjun <yongjun_wei@trendmicro.com.cn>
Link: http://lkml.kernel.org/r/CAPgLHd-Fjx1RybjWFAu1vHRfTvhWwMLL3x46BouC5uNxHPjy1A@mail.gmail.comAcked-by: NKees Cook <keescook@chromium.org>
Signed-off-by: NH. Peter Anvin <hpa@linux.intel.com>