early_indentify_cpu is only used in setup_64.c
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Move acpi/pci related declarations to the correct headers
and remove the duplicate.

Build fix from: Andrew Morton
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Remove declarations which are made already in the appropriate header file.
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Unify apic.h variants.
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Use u32 so 32 and 64bit have the same interface.

Andrew Morton: xen, lguest build fixes
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Preperatory patch for merging apic headers.
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Use the same name for the 32 and 64 bit variant.
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

White space and coding style clenaup.

Move the K8 local apic defines to apicdef.h, where they belong
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

White space and coding style cleanups.

Change unsigned to int. There is no win when we compare mincount against pc->size,
which is an int as well. Casting pc->size to unsigned just might hide real problems.
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Create a ldt write accessor like the 32 bit one.

Preparatory patch for merging ldt.c and anyway necessary for
64bit paravirt ops.
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

White space and coding style clenaup.
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

White space and coding style clenaup.
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

White space and coding style cleanup.
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

code cleanups:

                                       errors   lines of code   errors/KLOC
 arch/x86/kernel/pci-gart_64.c            183             748         244.6
 arch/x86/kernel/pci-gart_64.c              0             790             0
Signed-off-by: NIngo Molnar <mingo@elte.hu>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>

manually clean up some of the damage that lindent caused.
(this is a separate commit so that in the unlikely case of
a typo we can bisect it down to the manual edits.)
Signed-off-by: NIngo Molnar <mingo@elte.hu>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>

lindent these files:
                                       errors   lines of code   errors/KLOC
 arch/x86/math-emu/                      2236            9424         237.2
 arch/x86/math-emu/                       128            8706          14.7

no other changes. No code changed:

   text    data     bss     dec     hex filename
   5589802  612739 3833856 10036397         9924ad vmlinux.before
   5589802  612739 3833856 10036397         9924ad vmlinux.after

the intent of this patch is to ease the automated tracking of kernel
code quality - it's just much easier for us to maintain it if every file
in arch/x86 is supposed to be clean.

NOTE: it is a known problem of lindent that it causes some style damage
of its own, but it's a safe tool (well, except for the gcc array range
initializers extension), so we did the bulk of the changes via lindent,
and did the manual fixups in a followup patch.

the resulting math-emu code has been tested by Thomas Gleixner on a real
386 DX CPU as well, and it works fine.
Signed-off-by: NIngo Molnar <mingo@elte.hu>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>

lindent the mach-voyager files to get rid of more than 300 style errors:

                                       errors   lines of code   errors/KLOC
 arch/x86/mach-voyager/   [old]           409            3729         109.6
 arch/x86/mach-voyager/   [new]            71            3678          19.3
Signed-off-by: NIngo Molnar <mingo@elte.hu>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>

clean up arch/x86/kernel/aperture_64.c printk()s.
Signed-off-by: NIngo Molnar <mingo@elte.hu>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>

whitespace cleanup. No code changed:

   text    data     bss     dec     hex filename
   2080      76       4    2160     870 aperture_64.o.before
   2080      76       4    2160     870 aperture_64.o.after

                                       errors   lines of code   errors/KLOC
 arch/x86/kernel/aperture_64.c            114             299         381.2
 arch/x86/kernel/aperture_64.c              0             315             0
Signed-off-by: NIngo Molnar <mingo@elte.hu>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>

White space and coding style clenaup.
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

White space and coding style clenaup.
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

White space and coding style clenaup.
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

White space and coding style clenaup.
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

White space and coding style cleanup.
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

White space and coding style clenaup.
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

White space and coding style clenaup.
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

White space and coding style clenaup.
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

asm/cpufeature.h was already almost unified; this completes the job.
Signed-off-by: NH. Peter Anvin <hpa@zytor.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>

Create <asm/asm.h>, with common definitions suitable for assembly
unification.
Signed-off-by: NH. Peter Anvin <hpa@zytor.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>

local_irq_enable() is missing after sched_clock_idle_wakeup_event().
Signed-off-by: NHiroshi Shimamoto <h-shimamoto@ct.jp.nec.com>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

do a proper idle-wakeup event on HLT as well - some CPUs stop the TSC
in HLT too, not just when going through the ACPI methods.

(the ACPI idle code already does this.)

[ update the 64-bit side too, as noticed by Jiri Slaby. ]
Signed-off-by: NIngo Molnar <mingo@elte.hu>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>

scale the sched_clock() cyc_2_nsec scaling factor according to
CPU frequency changes.

[ mingo@elte.hu: simplified it and fixed it for SMP. ]
Signed-off-by: NIngo Molnar <mingo@elte.hu>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>

cf http://lkml.org/lkml/2007/10/3/41

To summarize: on Linux, SA_ONSTACK decides whether you are already on the
signal stack based on the value of the SP at the time of a signal.  If
you are not already inside the range, you are not "on the signal stack"
and so the new signal handler frame starts over at the base of the signal
stack.

sigaltstack (and sigstack before it) was invented in BSD.  There, the
SA_ONSTACK behavior has always been different.  It uses a kernel state
flag to decide, rather than the SP value.  When you first take an
SA_ONSTACK signal and switch to the alternate signal stack, it sets the
SS_ONSTACK flag in the thread's sigaltstack state in the kernel.
Thereafter you are "on the signal stack" and don't switch SP before
pushing a handler frame no matter what the SP value is.  Only when you
sigreturn from the original handler context do you clear the SS_ONSTACK
flag so that a new handler frame will start over at the base of the
alternate signal stack.

The undesireable effect of the Linux behavior is that an overflow of the
alternate signal stack can not only go undetected, but lead to a ring
buffer effect of clobbering the original handler frame at the base of the
signal stack for each successive signal that comes just after the
overflow.  This is what Shi Weihua's test case demonstrates.  Normally
this does not come up because of the signal mask, but the test case uses
SA_NODEFER for its SIGSEGV handler.

The other subtle part of the existing Linux semantics is that a simple
longjmp out of a signal handler serves to take you off the signal stack
in a safe and reliable fashion without having used sigreturn (nor having
just returned from the handler normally, which means the same).  After
the longjmp (or even informal stack switching not via any proper libc or
kernel interface), the alternate signal stack stands ready to be used
again.

A paranoid program would allocate a PROT_NONE red zone around its
alternate signal stack.  Then a small overflow would trigger a SIGSEGV in
handler setup, and be fatal (core dump) whether or not SIGSEGV is
blocked.  As with thread stack red zones, that cannot catch all overflows
(or underflows).  e.g., a local array as large as page size allocated in
a function called from a handler, but not actually touched before more
calls push more stack, could cause an overflow that silently pushes into
some unrelated allocated pages.

The BSD behavior does not do anything in particular about overflow.  But
it does at least avoid the wraparound or "ring buffer effect", so you'll
just get a straightforward all-out overflow down your address space past
the low end of the alternate signal stack.  I don't know what the BSD
behavior is for longjmp out of an SA_ONSTACK handler.

The POSIX wording relating to sigaltstack is pretty minimal.  I don't
think it speaks to this issue one way or another.  (The program that
overflows its stack is clearly in undefined behavior territory of one
sort or another anyhow.)

Given the longjmp issue and the potential for highly subtle complications
in existing programs relying on this in arcane ways deep in their code, I
am very dubious about changing the behavior to the BSD style persistent
flag.  I think Shi Weihua's patches have a similar effect by tracking the
SP used in the last handler setup.

I think it would be sensible for the signal handler setup code to detect
when it would itself be causing a stack overflow.  Maybe something like
the following patch (untested).  This issue exists in the same way on all
machines, so ideally they would all do a similar check.

When it's the handler function itself or its callees that cause the
overflow, rather than the signal handler frame setup alone crossing the
boundary, this still won't help.  But I don't see any way to distinguish
that from the valid longjmp case.
Signed-off-by: NIngo Molnar <mingo@elte.hu>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>

add the DMI strings provided by Islam Amer <pharon@gmail.com>, for
the Compaq Presario V6000 (Quanta/30B7).
Signed-off-by: NIngo Molnar <mingo@elte.hu>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>

make io_delay=0xed the default. This frees up port 0x80 which is
a debug port on some machines and locks up certain laptops.

Testing only for now. Try the io_delay=0x80 boot option if this does not
work for you.
Signed-off-by: NIngo Molnar <mingo@elte.hu>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>

various changes to the in_p/out_p delay details:

- add the io_delay=none method
- make each method selectable from the kernel config
- simplify the delay code a bit by getting rid of an indirect function call
- add the /proc/sys/kernel/io_delay_type sysctl
- change 'io_delay=standard|alternate' to io_delay=0x80 and io_delay=0xed
- make the io delay config not depend on CONFIG_DEBUG_KERNEL
Signed-off-by: NIngo Molnar <mingo@elte.hu>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
Tested-by: N"David P. Reed" <dpreed@reed.com>

x86: provide a DMI based port 0x80 I/O delay override.

Certain (HP) laptops experience trouble from our port 0x80 I/O delay
writes. This patch provides for a DMI based switch to the "alternate
diagnostic port" 0xed (as used by some BIOSes as well) for these.

David P. Reed confirmed that port 0xed works for him and provides a
proper delay. The symptoms of _not_ working are a hanging machine,
with "hwclock" use being a direct trigger.

Earlier versions of this attempted to simply use udelay(2), with the
2 being a value tested to be a nicely conservative upper-bound with
help from many on the linux-kernel mailinglist but that approach has
two problems.

First, pre-loops_per_jiffy calibration (which is post PIT init while
some implementations of the PIT are actually one of the historically
problematic devices that need the delay) udelay() isn't particularly
well-defined. We could initialise loops_per_jiffy conservatively (and
based on CPU family so as to not unduly delay old machines) which
would sort of work, but...

Second, delaying isn't the only effect that a write to port 0x80 has.
It's also a PCI posting barrier which some devices may be explicitly
or implicitly relying on. Alan Cox did a survey and found evidence
that additionally some drivers may be racy on SMP without the bus
locking outb.

Switching to an inb() makes the timing too unpredictable and as such,
this DMI based switch should be the safest approach for now. Any more
invasive changes should get more rigid testing first. It's moreover
only very few machines with the problem and a DMI based hack seems
to fit that situation.

This also introduces a command-line parameter "io_delay" to override
the DMI based choice again:

	io_delay=<standard|alternate>

where "standard" means using the standard port 0x80 and "alternate"
port 0xed.

This retains the udelay method as a config (CONFIG_UDELAY_IO_DELAY) and
command-line ("io_delay=udelay") choice for testing purposes as well.

This does not change the io_delay() in the boot code which is using
the same port 0x80 I/O delay but those do not appear to be a problem
as David P. Reed reported the problem was already gone after using the
udelay version. He moreover reported that booting with "acpi=off" also
fixed things and seeing as how ACPI isn't touched until after this DMI
based I/O port switch I believe it's safe to leave the ones in the boot
code be.

The DMI strings from David's HP Pavilion dv9000z are in there already
and we need to get/verify the DMI info from other machines with the
problem, notably the HP Pavilion dv6000z.

This patch is partly based on earlier patches from Pavel Machek and
David P. Reed.
Signed-off-by: NRene Herman <rene.herman@gmail.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>

s2ram recently became useful here, except for the kernel's annoying
habit of disabling my P4's perfectly good TSC.

[  107.894470] CPU 1 is now offline
[  107.894474] SMP alternatives: switching to UP code
[  107.895832] CPU0 attaching sched-domain:
[  107.895836]  domain 0: span 1
[  107.895838]   groups: 1
[  107.896097] CPU1 is down
[    3.726156] Intel machine check architecture supported.
[    3.726165] Intel machine check reporting enabled on CPU#0.
[    3.726167] CPU0: Intel P4/Xeon Extended MCE MSRs (12) available
[    3.726170] CPU0: Thermal monitoring enabled
[    3.726175] Back to C!
[    3.726708] Force enabled HPET at resume
[    3.726775] Enabling non-boot CPUs ...
[    3.727049] CPU0 attaching NULL sched-domain.
[    3.727165] SMP alternatives: switching to SMP code
[    3.727858] Booting processor 1/1 eip 3000
[    3.727862] CPU 1 irqstacks, hard=b042f000 soft=b042d000
[    3.738173] Initializing CPU#1
[    3.798912] Calibrating delay using timer specific routine.. 5986.12 BogoMIPS (lpj=2993061)
[    3.798920] CPU: After generic identify, caps: bfebfbff 00000000 00000000 00000000 00004400 00000000 00000000 00000000
[    3.798931] CPU: Trace cache: 12K uops, L1 D cache: 8K
[    3.798934] CPU: L2 cache: 512K
[    3.798936] CPU: Physical Processor ID: 0
[    3.798938] CPU: After all inits, caps: bfebfbff 00000000 00000000 0000b080 00004400 00000000 00000000 00000000
[    3.798946] Intel machine check architecture supported.
[    3.798952] Intel machine check reporting enabled on CPU#1.
[    3.798955] CPU1: Intel P4/Xeon Extended MCE MSRs (12) available
[    3.798959] CPU1: Thermal monitoring enabled
[    3.799161] CPU1: Intel(R) Pentium(R) 4 CPU 3.00GHz stepping 09
[    3.799187] checking TSC synchronization [CPU#0 -> CPU#1]:
[    3.819181] Measured 63588552840 cycles TSC warp between CPUs, turning off TSC clock.
[    3.819184] Marking TSC unstable due to: check_tsc_sync_source failed.

If check_tsc_warp() is called after initial boot, and the TSC has in the
meantime been set (BIOS, user, silicon, elves) to a value lower than the
last stored/stale value, we blame the TSC.  Reset to pristine condition
after every test.
Signed-off-by: NMike Galbraith <efault@gmx.de>
Signed-off-by: NIngo Molnar <mingo@elte.hu>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>