Add a step to the IDE PM state machine that reprograms disk PIO timings
as the first step on resume. This prevents ide deadlock on
resume-from-ram on my nforce3-based laptop.

An earlier implementation was written entirely within the amd74xx ide
driver, but Alan helpfully pointed out that this is the correct thing to
do globally. Still, I'm only calling hwif->tuneproc() for disks, based
on two things:

 - The existing state machine is already passed over for non-disk drives
 - Previous testing on my laptop shows that the hangs are related only
   to the disk - suspend/resume from a livecd showed that there's no
   need for this on the cdrom.
Signed-off-by: NJason Lunz <lunz@falooley.org>
Cc: Bartlomiej Zolnierkiewicz <B.Zolnierkiewicz@elka.pw.edu.pl>
Cc: "Rafael J. Wysocki" <rjw@sisk.pl>
Cc: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Cc: Pavel Machek <pavel@ucw.cz>
Cc: Brad Campbell <brad@wasp.net.au>
Cc: David Brownell <david-b@pacbell.net>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Remove dma_base2 field from ide_hwif_t as it's used only in 2 drivers and
without great need.
Signed-off-by: NSergei Shtylyov <sshtylyov@ru.mvista.com>
Cc: John Keller <jpk@sgi.com>
Signed-off-by: NJeremy Higdon <jeremy@sgi.com>
Acked-by: NAlan Cox <alan@lxorguk.ukuu.org.uk>
Cc: Bartlomiej Zolnierkiewicz <B.Zolnierkiewicz@elka.pw.edu.pl>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

- setup-pci.c: remove the unused ide_pci_unregister_driver()
- ide-dma.c: remove the unused EXPORT_SYMBOL_GPL(ide_in_drive_list)
Signed-off-by: NAdrian Bunk <bunk@stusta.de>
Acked-by: NAlan Cox <alan@lxorguk.ukuu.org.uk>
Cc: Bartlomiej Zolnierkiewicz <B.Zolnierkiewicz@elka.pw.edu.pl>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Check driver layer return values in IDE core.
Signed-off-by: NRandy Dunlap <rdunlap@xenotime.net>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

There are three flags being set by default by the PIIX driver for speeds >
PIO 1, and one not being cleared properly on fallback to PIO0.  The most
important one is the prefetch/post write control which only works for ATA
and can do bad things with ATAPI.

The patch does its best to set the flags correctly for drivers/ide.  Its
not 100% perfect but its closer than the original.  100% perfect requires
proper IORDY handling but this isn't critical (and its not right in libata
either ..  yet)

Sergei Shtylyov <sshtylyov@ru.mvista.com> said:

> +					{ 0, 0 },
> +					{ 0, 0 },
> +					{ 1, 0 },
> +					{ 2, 1 },
> +					{ 2, 3 }, };
>
>  	pio = ide_get_best_pio_mode(drive, pio, 5, NULL);

    BTW, there's quite obvious error here which leads to access outside of
timings[] if somebody passes PIO mode 5 (or autotuning code finds out that
drive supports PIO mode 5). Could have been fixed while at it... Those drives
should be rare, though...

> +		}
>  		master_data = master_data | (timings[pio][0] << 12) | (timings[pio][1] << 8);
>  	}
>  	pci_write_config_word(dev, master_port, master_data);

    Actually, there's one more serious issue with piix_tune_drive() -- it
doesn't actually set the drive's own transfer mode.
Signed-off-by: NAlan Cox <alan@redhat.com>
Cc: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Cc: Bartlomiej Zolnierkiewicz <B.Zolnierkiewicz@elka.pw.edu.pl>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Fix ide_in_drive_list: drive_table->id_firmware should be searched *in*
id->fw_rev, not vice versa.
Signed-off-by: NKirill Smelkov <kirr@mns.spb.ru>
Cc: Bartlomiej Zolnierkiewicz <B.Zolnierkiewicz@elka.pw.edu.pl>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

This patch allows me to use dma with my cd/dvd attached to my on board
pdc20265 ide controller

Alan sayeth:

  Looks sane.  Would be nice to know if there is any documentation
  supporting this hack being safe but the logic makes sense.  The LBA48 case
  faces the same problem - the state machine gets confused about the transfer
  length and needs kicking
Signed-off-by: NTobias Oed <tobiasoed@hotmail.com>
Acked-by: NAlan Cox <alan@lxorguk.ukuu.org.uk>
Cc: Bartlomiej Zolnierkiewicz <B.Zolnierkiewicz@elka.pw.edu.pl>
Cc: Jens Axboe <axboe@suse.de>
Cc: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

ide_dma_speed() fails to actually honor the IDE drivers' mode support
masks) because of the bogus checks -- thus, selecting the DMA transfer mode
that the driver explicitly refuses to support is possible.  Additionally,
there is no check for validity of the UltraDMA mode data in the drive ID,
and the function is misdocumented.
Signed-off-by: NSergei Shtylyov <sshtylyov@ru.mvista.com>
Cc: Bartlomiej Zolnierkiewicz <B.Zolnierkiewicz@elka.pw.edu.pl>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Make IDE_HWIFS configurable if EMBEDDED

This lets us lop as much as 16k off an x86 build.  It's a little ugly, but
it's dead simple.  Note the fix for HWIFS < 2.

Sizing interfaces dynamically unfortunately turns out to be pretty
major surgery.

add/remove: 0/1 grow/shrink: 0/11 up/down: 0/-16182 (-16182)
function                                     old     new   delta
ide_hwifs                                  16920    1692  -15228
init_irq                                    1113     750    -363
ideprobe_init                                283     138    -145
ide_pci_setup_ports                         1329    1193    -136
save_match                                    85       -     -85
ide_register_hw_with_fixup                   367     287     -80
ide_setup                                   1364    1308     -56
is_chipset_set                                40       4     -36
create_proc_ide_interfaces                   225     205     -20
init_ide_data                                 84      67     -17
ide_probe_for_cmd640x                       1198    1183     -15
ide_unregister                              1452    1451      -1
Signed-off-by: NMatt Mackall <mpm@selenic.com>
Cc: Bartlomiej Zolnierkiewicz <B.Zolnierkiewicz@elka.pw.edu.pl>
Acked-by: NAlan Cox <alan@lxorguk.ukuu.org.uk>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

In 2.6.15.1 I encountered some IDE crashes when unplugging IDE cables to
emulate disk errors.  Below is a patch against 2.6.16 which I think still
applies.

1.  The first BUG_ON could trigger when a PREFLUSH IO fails (it would
   fail the original barrier request which hasn't been marked REQ_STARTED
   yet).

2. the rq could have been dequeued already (same as 1).

3.  HWGROUP(drive)->rq could be NULL because of the ide_error() several
   lines earlier.
Signed-off-by: NHua Zhong <hzhong@gmail.com>
Cc: Bartlomiej Zolnierkiewicz <B.Zolnierkiewicz@elka.pw.edu.pl>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Release the DMA engine for the custom mapping IDE drivers also (for
example, siimage.c does allocate it in both I/O-mapped and custom-mapped
modes).  Remove useless code from the error path of
ide_allocate_dma_engine().
Signed-off-by: NSergei Shtylyov <sshtylyov@ru.mvista.com>
Cc: Bartlomiej Zolnierkiewicz <B.Zolnierkiewicz@elka.pw.edu.pl>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

- Claim extra DMA I/O ports regardless of what IDE channels are
  present/enabled.

- Remove extra ports handling from ide_mapped_mmio_dma() since it's not
  applicable to the custom-mapping IDE drivers.
Signed-off-by: NSergei Shtylyov <sshtylyov@ru.mvista.com>
Cc: Bartlomiej Zolnierkiewicz <B.Zolnierkiewicz@elka.pw.edu.pl>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Less functional than libata this just uses the merged interface provided for
dumb legacy OS's.  This is basically a bridge for people not yet ready to use
libata for some reason or another.

Port visibility is entirely dependant on the BIOS setup.
Signed-off-by: NAlan Cox <alan@lxorguk.ukuu.org.uk>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

When the per cpu sched domains are build then they also need to be placed
on the node where the cpu resides otherwise we will have frequent off node
accesses which will slow down the system.
Signed-off-by: NChristoph Lameter <clameter@sgi.com>
Acked-by: NIngo Molnar <mingo@elte.hu>
Acked-by: NNick Piggin <nickpiggin@yahoo.com.au>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Fixing wrong comment for find_idlest_cpu().
Signed-off-by: NSatoru Takeuchi <takeuchi_satoru@jp.fujitsu.com>
Acked-by: NIngo Molnar <mingo@elte.hu>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Up to now sched group's cpu_power for each sched domain is initialized
independently.  This made the setup code ugly as the new sched domains are
getting added.

Make the sched group cpu_power setup code generic, by using domain child
field and new domain flag in sched_domain.  For most of the sched
domains(except NUMA), sched group's cpu_power is now computed generically
using the domain properties of itself and of the child domain.

sched groups in NUMA domains are setup little differently and hence they
don't use this generic mechanism.
Signed-off-by: NSuresh Siddha <suresh.b.siddha@intel.com>
Acked-by: NIngo Molnar <mingo@elte.hu>
Acked-by: NNick Piggin <nickpiggin@yahoo.com.au>
Cc: Paul Jackson <pj@sgi.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Introduce the child field in sched_domain struct and use it in
sched_balance_self().

We will also use this field in cleaning up the sched group cpu_power
setup(done in a different patch) code.
Signed-off-by: NSuresh Siddha <suresh.b.siddha@intel.com>
Acked-by: NIngo Molnar <mingo@elte.hu>
Acked-by: NNick Piggin <nickpiggin@yahoo.com.au>
Cc: Paul Jackson <pj@sgi.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

If only a single CPU is present, printing this doesn't make much sense.
Signed-off-by: NDave Jones <davej@redhat.com>
Acked-by: NIngo Molnar <mingo@elte.hu>
Acked-by: NNick Piggin <nickpiggin@yahoo.com.au>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Remove dynamic sched group allocations for MC and SMP domains.  These
allocations can easily fail on big systems(1024 or so CPUs) and we can live
with out these dynamic allocations.

[akpm@osdl.org: build fix]
Signed-off-by: NSuresh Siddha <suresh.b.siddha@intel.com>
Acked-by: NIngo Molnar <mingo@elte.hu>
Acked-by: NNick Piggin <nickpiggin@yahoo.com.au>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Force /sbin/init off isolated cpus (unless every CPU is specified as an
isolcpu).

Users seem to think that the isolated CPUs shouldn't have much running on
them to begin with.  That's fair enough: intuitive, I guess.  It also means
that the cpu affinity masks of tasks will not include isolcpus by default,
which is also more intuitive, perhaps.

/sbin/init is spawned from the boot CPU's idle thread, and /sbin/init
starts the rest of userspace. So if the boot CPU is specified to be an
isolcpu, then prior to this patch, all of userspace will be run there.

(throw in a couple of plausible devinit -> cpuinit conversions I spotted
while we're here).
Signed-off-by: NNick Piggin <npiggin@suse.de>
Cc: Dimitri Sivanich <sivanich@sgi.com>
Acked-by: NPaul Jackson <pj@sgi.com>
Acked-by: NIngo Molnar <mingo@elte.hu>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

	switch(reg1 & 0x700) {
		case 5:
			info_hpt366.private_data = &hpt366_40;
			break;
		case 9:
			info_hpt366.private_data = &hpt366_25;
			break;
		default:
			info_hpt366.private_data = &hpt366_33;
			break;
	}

The above runs always default part. It should be "(reg1 & 0x700) >> 8".
Signed-off-by: NOGAWA Hirofumi <hirofumi@mail.parknet.co.jp>
Acked-by: NAlan Cox <alan@redhat.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

The 'STABLE BRANCH' entry is duplicated, remove it.
Signed-off-by: NLuiz Fernando N. Capitulino <lcapitulino@mandriva.com.br>
Cc: Greg KH <greg@kroah.com>
Cc: Chris Wright <chrisw@sous-sol.org>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

We removed 8250_acpi in 2.6.17.  If we don't have PNPACPI turned on, we
won't find any ACPI serial devices, so mention this requirement in the
troubleshooting part of the documentation.

CONFIG_PNPACPI is already turned on in all the relevant defconfigs.
Signed-off-by: NBjorn Helgaas <bjorn.helgaas@hp.com>
Acked-by: N"Luck, Tony" <tony.luck@intel.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

After the previous patch to disable the kernel IPMI daemon if interrupts
were available, the issue of broken hardware was raised, and a reasonable
request to add an override was mode.  So here it is.

Allow the user to force the kernel ipmi daemon on or off.  This way,
hardware with broken interrupts or users that are not concerned with
performance can turn it on or off to their liking.

[akpm@osdl.org: save 4 bytes in vmlinux]
Signed-off-by: NCorey Minyard <minyard@acm.org>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Whomever said...

  "When you meet someone now who is writing a compiler or hacking a Unix
   kernel, at least you know they're not just doing it to pick up chicks."

...has obviously never met a _Linux_ kernel hacker.

Anyway, sometimes people confuse my email addresses, which is why I
really should add the proper one to CREDITS ;-).
Signed-off-by: NPekka Enberg <penberg@cs.helsinki.fi>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

The last change for partport_pc did fix the common case for all PowerMacs,
but it broke the case for PCI multiport IO cards.  In fact, the config
option CONFIG_PARPORT_PC_SUPERIO=y lead to a hard crash when cups probed
the parport driver.  It enables the winbond and smsc probing.

Remove the PARPORT_BASE check again, parport_pc_find_nonpci_ports() will
take care of it.  All powerpc configs should have
CONFIG_PARPORT_PC_SUPERIO=n, the code did not find anything on the chrp
boards we tested it on.

Tested on a G4/466 with a PCI card:

0001:10:13.0 Serial controller: Timedia Technology Co Ltd PCI2S550 (Dual 16550 UART) (rev 01) (prog-if 02 [16550])
        Subsystem: Timedia Technology Co Ltd Unknown device 5079
        Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping+ SERR- FastB2B-
        Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
        Interrupt: pin A routed to IRQ 53
        Region 0: I/O ports at f2000800 [size=32]
        Region 2: I/O ports at f2000870 [size=8]
        Region 3: I/O ports at f2000860 [size=8]
Signed-off-by: NOlaf Hering <olaf@aepfle.de>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Adam Belay <ambx1@neo.rr.com>
Cc: Dmitry Torokhov <dtor@mail.ru>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Clean up warnings in drivers/isdn by using long not int for the values
where we pass void * and cast to integer types.  The code is ok (ok passing
the stuff this way isn't pretty but the code is valid).  In all the cases I
checked out the right thing happens anyway but this removes all the
warnings.
Signed-off-by: NAlan Cox <alan@redhat.com>
Cc: Jeff Garzik <jeff@garzik.org>
Acked-by: NKarsten Keil <kkeil@suse.de>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Acked-by: NAlan Cox <alan@redhat.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Kill warning:

drivers/char/ip2/ip2main.c: In function ‘ip2_loadmain’:
drivers/char/ip2/ip2main.c:782: warning: label ‘out_class’ defined but not used

This driver's initialization (and cleanup of errors during init) is
extremely convoluted, and could stand to be transformed into the standard
unwinding-goto style of error cleanup.
Signed-off-by: NJeff Garzik <jeff@garzik.org>
Acked-by: NMichael H. Warfield <mhw@wittsend.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

gcc issues the following warning:

drivers/char/ipmi/ipmi_si_intf.c: In function ‘init_ipmi_si’:
drivers/char/ipmi/ipmi_si_intf.c:1729: warning: ‘data.irq’ may be used uninitialized in this function

This is indeed a bug.  data.irq is completely uninitialized in some code
paths.  Worse than that, data from a previous decode_dmi() run can easily
leak through successive calls.
Signed-off-by: NJeff Garzik <jeff@garzik.org>
Acked-by: NCorey Minyard <minyard@acm.org>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

While reviewing the 'may be used uninitialized' bogus gcc warnings, I
noticed that an error code assignment was only needed if an error had
actually occured.
Signed-off-by: NJeff Garzik <jeff@garzik.org>
Cc: Davide Libenzi <davidel@xmailserver.org>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Add kernel-doc function headers in kernel/resource.c and use them in DocBook.
Signed-off-by: NRandy Dunlap <rdunlap@xenotime.net>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Add kernel-doc function headers in kernel/dma.c and use it in DocBook.

Clean up kernel-doc in mca_dma.h (the colon (':') represents a
section header).
Signed-off-by: NRandy Dunlap <rdunlap@xenotime.net>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

It is a non-standard heap-sort algorithm implementation because the index
of child node is wrong .  The sort function still outputs right result, but
the performance is O( n * ( log(n) + 1 ) ) , about 10% ~ 20% worse than
standard algorithm.
Signed-off-by: Nkeios <keios.cn@gmail.com>
Acked-by: NMatt Mackall <mpm@selenic.com>
Acked-by: NZou Nan hai <nanhai.zou@intel.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Some uses of kallsyms_lookup() do not need to find out the name of a symbol
and its module's name it belongs.  This is specially true in arch specific
code, which needs to unwind the stack to show the back trace during oops
(mips is an example).  In this specific case, we just need to retreive the
function's size and the offset of the active intruction inside it.

Adds a new entry "kallsyms_lookup_size_offset()" This new entry does
exactly the same as kallsyms_lookup() but does not require any buffers to
store any names.

It returns 0 if it fails otherwise 1.
Signed-off-by: NFranck Bui-Huu <vagabon.xyz@gmail.com>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Permit kmalloc() to make allocations of up to 32MB if so configured.  This
may be useful under NOMMU conditions where vmalloc() can't do this.
Signed-off-by: NDavid Howells <dhowells@redhat.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

These patches make the kernel pass 64-bit inode numbers internally when
communicating to userspace, even on a 32-bit system.  They are required
because some filesystems have intrinsic 64-bit inode numbers: NFS3+ and XFS
for example.  The 64-bit inode numbers are then propagated to userspace
automatically where the arch supports it.

Problems have been seen with userspace (eg: ld.so) using the 64-bit inode
number returned by stat64() or getdents64() to differentiate files, and
failing because the 64-bit inode number space was compressed to 32-bits, and
so overlaps occur.

This patch:

Make filldir_t take a 64-bit inode number and struct kstat carry a 64-bit
inode number so that 64-bit inode numbers can be passed back to userspace.

The stat functions then returns the full 64-bit inode number where
available and where possible.  If it is not possible to represent the inode
number supplied by the filesystem in the field provided by userspace, then
error EOVERFLOW will be issued.

Similarly, the getdents/readdir functions now pass the full 64-bit inode
number to userspace where possible, returning EOVERFLOW instead when a
directory entry is encountered that can't be properly represented.

Note that this means that some inodes will not be stat'able on a 32-bit
system with old libraries where they were before - but it does mean that
there will be no ambiguity over what a 32-bit inode number refers to.

Note similarly that directory scans may be cut short with an error on a
32-bit system with old libraries where the scan would work before for the
same reasons.

It is judged unlikely that this situation will occur because modern glibc
uses 64-bit capable versions of stat and getdents class functions
exclusively, and that older systems are unlikely to encounter
unrepresentable inode numbers anyway.

[akpm: alpha build fix]
Signed-off-by: NDavid Howells <dhowells@redhat.com>
Cc: Trond Myklebust <trond.myklebust@fys.uio.no>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Make the pid.h macros look less revolting in an 80-col window.
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

This seems to have been missed when unifdef went in
via Sam's tree..
Signed-off-by: NPaul Mundt <lethal@linux-sh.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

The previous hp100 changeset attempted to kill warnings, but was only
tested on !CONFIG_ISA platforms.  The correct conditional compilation
setup involves tested CONFIG_ISA rather than just MODULE.

Fixes link on CONFIG_ISA platforms (i386) in current -git.
Signed-off-by: NJeff Garzik <jeff@garzik.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>