Skip to content

R
raspberrypi-kernel

openeuler / raspberrypi-kernel

通知 13
Star 1
Fork 0
R
raspberrypi-kernel
切换分支/标签
  1. 02 10月, 2018 1 次提交
    • S
      sched/numa: Pass destination CPU as a parameter to migrate_task_rq · 1327237a
      由 Srikar Dronamraju 提交于 
      This additional parameter (new_cpu) is used later for identifying if
task migration is across nodes.

No functional change.

Specjbb2005 results (8 warehouses)
Higher bops are better

2 Socket - 2  Node Haswell - X86
JVMS  Prev    Current  %Change
4     203353  200668   -1.32036
1     328205  321791   -1.95427

2 Socket - 4 Node Power8 - PowerNV
JVMS  Prev    Current  %Change
1     214384  204848   -4.44809

2 Socket - 2  Node Power9 - PowerNV
JVMS  Prev    Current  %Change
4     188553  188098   -0.241311
1     196273  200351   2.07772

4 Socket - 4  Node Power7 - PowerVM
JVMS  Prev     Current  %Change
8     57581.2  58145.9  0.980702
1     103468   103798   0.318939

Brings out the variance between different specjbb2005 runs.

Some events stats before and after applying the patch.

perf stats 8th warehouse Multi JVM 2 Socket - 2  Node Haswell - X86
Event                     Before          After
cs                        13,941,377      13,912,183
migrations                1,157,323       1,155,931
faults                    382,175         367,139
cache-misses              54,993,823,500  54,240,196,814
sched:sched_move_numa     2,005           1,571
sched:sched_stick_numa    14              9
sched:sched_swap_numa     529             463
migrate:mm_migrate_pages  1,573           703

vmstat 8th warehouse Multi JVM 2 Socket - 2  Node Haswell - X86
Event                   Before  After
numa_hint_faults        67099   50155
numa_hint_faults_local  58456   45264
numa_hit                240416  239652
numa_huge_pte_updates   18      36
numa_interleave         65      68
numa_local              240339  239576
numa_other              77      76
numa_pages_migrated     1574    680
numa_pte_updates        77182   71146

perf stats 8th warehouse Single JVM 2 Socket - 2  Node Haswell - X86
Event                     Before          After
cs                        3,176,453       3,156,720
migrations                30,238          30,354
faults                    87,869          97,261
cache-misses              12,544,479,391  12,400,026,826
sched:sched_move_numa     23              4
sched:sched_stick_numa    0               0
sched:sched_swap_numa     6               1
migrate:mm_migrate_pages  10              20

vmstat 8th warehouse Single JVM 2 Socket - 2  Node Haswell - X86
Event                   Before  After
numa_hint_faults        236     272
numa_hint_faults_local  201     186
numa_hit                72293   71362
numa_huge_pte_updates   0       0
numa_interleave         26      23
numa_local              72233   71299
numa_other              60      63
numa_pages_migrated     8       2
numa_pte_updates        0       0

perf stats 8th warehouse Multi JVM 2 Socket - 2  Node Power9 - PowerNV
Event                     Before       After
cs                        8,478,820    8,606,824
migrations                171,323      155,352
faults                    307,499      301,409
cache-misses              240,353,599  157,759,224
sched:sched_move_numa     214          168
sched:sched_stick_numa    0            0
sched:sched_swap_numa     4            3
migrate:mm_migrate_pages  89           125

vmstat 8th warehouse Multi JVM 2 Socket - 2  Node Power9 - PowerNV
Event                   Before  After
numa_hint_faults        5301    4650
numa_hint_faults_local  4745    3946
numa_hit                92943   90489
numa_huge_pte_updates   0       0
numa_interleave         899     892
numa_local              92345   90034
numa_other              598     455
numa_pages_migrated     88      124
numa_pte_updates        5505    4818

perf stats 8th warehouse Single JVM 2 Socket - 2  Node Power9 - PowerNV
Event                     Before      After
cs                        2,066,172   2,113,167
migrations                11,076      10,533
faults                    149,544     142,727
cache-misses              10,398,067  5,594,192
sched:sched_move_numa     43          10
sched:sched_stick_numa    0           0
sched:sched_swap_numa     0           0
migrate:mm_migrate_pages  6           6

vmstat 8th warehouse Single JVM 2 Socket - 2  Node Power9 - PowerNV
Event                   Before  After
numa_hint_faults        3552    744
numa_hint_faults_local  3347    584
numa_hit                25611   25551
numa_huge_pte_updates   0       0
numa_interleave         213     263
numa_local              25583   25302
numa_other              28      249
numa_pages_migrated     6       6
numa_pte_updates        3535    744

perf stats 8th warehouse Multi JVM 4 Socket - 4  Node Power7 - PowerVM
Event                     Before           After
cs                        99,358,136       101,227,352
migrations                4,041,607        4,151,829
faults                    749,653          745,233
cache-misses              225,562,543,251  224,669,561,766
sched:sched_move_numa     771              617
sched:sched_stick_numa    14               2
sched:sched_swap_numa     204              187
migrate:mm_migrate_pages  1,180            316

vmstat 8th warehouse Multi JVM 4 Socket - 4  Node Power7 - PowerVM
Event                   Before  After
numa_hint_faults        27409   24195
numa_hint_faults_local  20677   21639
numa_hit                239988  238331
numa_huge_pte_updates   0       0
numa_interleave         0       0
numa_local              239983  238331
numa_other              5       0
numa_pages_migrated     1016    204
numa_pte_updates        27916   24561

perf stats 8th warehouse Single JVM 4 Socket - 4  Node Power7 - PowerVM
Event                     Before          After
cs                        60,899,307      62,738,978
migrations                544,668         562,702
faults                    270,834         228,465
cache-misses              74,543,455,635  75,778,067,952
sched:sched_move_numa     735             648
sched:sched_stick_numa    25              13
sched:sched_swap_numa     174             137
migrate:mm_migrate_pages  816             733

vmstat 8th warehouse Single JVM 4 Socket - 4  Node Power7 - PowerVM
Event                   Before  After
numa_hint_faults        11059   10281
numa_hint_faults_local  4733    3242
numa_hit                41384   36338
numa_huge_pte_updates   0       0
numa_interleave         0       0
numa_local              41383   36338
numa_other              1       0
numa_pages_migrated     815     706
numa_pte_updates        11323   10176
Signed-off-by: NSrikar Dronamraju <srikar@linux.vnet.ibm.com>
Signed-off-by: NPeter Zijlstra (Intel) <peterz@infradead.org>
Cc: Jirka Hladky <jhladky@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Rik van Riel <riel@surriel.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/1537552141-27815-3-git-send-email-srikar@linux.vnet.ibm.comSigned-off-by: NIngo Molnar <mingo@kernel.org>
      1327237a
  3. 25 7月, 2018 1 次提交
    • D
      sched/deadline: Update rq_clock of later_rq when pushing a task · 840d7196
      由 Daniel Bristot de Oliveira 提交于 
      Daniel Casini got this warn while running a DL task here at RetisLab:

  [  461.137582] ------------[ cut here ]------------
  [  461.137583] rq->clock_update_flags < RQCF_ACT_SKIP
  [  461.137599] WARNING: CPU: 4 PID: 2354 at kernel/sched/sched.h:967 assert_clock_updated.isra.32.part.33+0x17/0x20
      [a ton of modules]
  [  461.137646] CPU: 4 PID: 2354 Comm: label_image Not tainted 4.18.0-rc4+ #3
  [  461.137647] Hardware name: ASUS All Series/Z87-K, BIOS 0801 09/02/2013
  [  461.137649] RIP: 0010:assert_clock_updated.isra.32.part.33+0x17/0x20
  [  461.137649] Code: ff 48 89 83 08 09 00 00 eb c6 66 0f 1f 84 00 00 00 00 00 55 48 c7 c7 98 7a 6c a5 c6 05 bc 0d 54 01 01 48 89 e5 e8 a9 84 fb ff <0f> 0b 5d c3 0f 1f 44 00 00 0f 1f 44 00 00 83 7e 60 01 74 0a 48 3b
  [  461.137673] RSP: 0018:ffffa77e08cafc68 EFLAGS: 00010082
  [  461.137674] RAX: 0000000000000000 RBX: ffff8b3fc1702d80 RCX: 0000000000000006
  [  461.137674] RDX: 0000000000000007 RSI: 0000000000000096 RDI: ffff8b3fded164b0
  [  461.137675] RBP: ffffa77e08cafc68 R08: 0000000000000026 R09: 0000000000000339
  [  461.137676] R10: ffff8b3fd060d410 R11: 0000000000000026 R12: ffffffffa4e14e20
  [  461.137677] R13: ffff8b3fdec22940 R14: ffff8b3fc1702da0 R15: ffff8b3fdec22940
  [  461.137678] FS:  00007efe43ee5700(0000) GS:ffff8b3fded00000(0000) knlGS:0000000000000000
  [  461.137679] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
  [  461.137680] CR2: 00007efe30000010 CR3: 0000000301744003 CR4: 00000000001606e0
  [  461.137680] Call Trace:
  [  461.137684]  push_dl_task.part.46+0x3bc/0x460
  [  461.137686]  task_woken_dl+0x60/0x80
  [  461.137689]  ttwu_do_wakeup+0x4f/0x150
  [  461.137690]  ttwu_do_activate+0x77/0x80
  [  461.137692]  try_to_wake_up+0x1d6/0x4c0
  [  461.137693]  wake_up_q+0x32/0x70
  [  461.137696]  do_futex+0x7e7/0xb50
  [  461.137698]  __x64_sys_futex+0x8b/0x180
  [  461.137701]  do_syscall_64+0x5a/0x110
  [  461.137703]  entry_SYSCALL_64_after_hwframe+0x44/0xa9
  [  461.137705] RIP: 0033:0x7efe4918ca26
  [  461.137705] Code: 00 00 00 74 17 49 8b 48 20 44 8b 59 10 41 83 e3 30 41 83 fb 20 74 1e be 85 00 00 00 41 ba 01 00 00 00 41 b9 01 00 00 04 0f 05 <48> 3d 01 f0 ff ff 73 1f 31 c0 c3 be 8c 00 00 00 49 89 c8 4d 31 d2
  [  461.137738] RSP: 002b:00007efe43ee4928 EFLAGS: 00000283 ORIG_RAX: 00000000000000ca
  [  461.137739] RAX: ffffffffffffffda RBX: 0000000005094df0 RCX: 00007efe4918ca26
  [  461.137740] RDX: 0000000000000001 RSI: 0000000000000085 RDI: 0000000005094e24
  [  461.137741] RBP: 00007efe43ee49c0 R08: 0000000005094e20 R09: 0000000004000001
  [  461.137741] R10: 0000000000000001 R11: 0000000000000283 R12: 0000000000000000
  [  461.137742] R13: 0000000005094df8 R14: 0000000000000001 R15: 0000000000448a10
  [  461.137743] ---[ end trace 187df4cad2bf7649 ]---

This warning happened in the push_dl_task(), because
__add_running_bw()->cpufreq_update_util() is getting the rq_clock of
the later_rq before its update, which takes place at activate_task().
The fix then is to update the rq_clock before calling add_running_bw().

To avoid double rq_clock_update() call, we set ENQUEUE_NOCLOCK flag to
activate_task().
Reported-by: NDaniel Casini <daniel.casini@santannapisa.it>
Signed-off-by: NDaniel Bristot de Oliveira <bristot@redhat.com>
Signed-off-by: NPeter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: NJuri Lelli <juri.lelli@redhat.com>
Cc: Clark Williams <williams@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Luca Abeni <luca.abeni@santannapisa.it>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Tommaso Cucinotta <tommaso.cucinotta@santannapisa.it>
Fixes: e0367b12 sched/deadline: Move CPU frequency selection triggering points
Link: http://lkml.kernel.org/r/ca31d073a4788acf0684a8b255f14fea775ccf20.1532077269.git.bristot@redhat.comSigned-off-by: NIngo Molnar <mingo@kernel.org>
      840d7196
  5. 16 7月, 2018 3 次提交
    • V
      sched/core: Use PELT for scale_rt_capacity() · 523e979d
      由 Vincent Guittot 提交于 
      The utilization of the CPU by RT, DL and IRQs are now tracked with
PELT so we can use these metrics instead of rt_avg to evaluate the remaining
capacity available for CFS class.

scale_rt_capacity() behavior has been changed and now returns the remaining
capacity available for CFS instead of a scaling factor because RT, DL and
IRQ provide now absolute utilization value.

The same formula as schedutil is used:

  IRQ util_avg + (1 - IRQ util_avg / max capacity ) * /Sum rq util_avg

but the implementation is different because it doesn't return the same value
and doesn't benefit of the same optimization.
Signed-off-by: NVincent Guittot <vincent.guittot@linaro.org>
Signed-off-by: NPeter Zijlstra (Intel) <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Morten.Rasmussen@arm.com
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: claudio@evidence.eu.com
Cc: daniel.lezcano@linaro.org
Cc: dietmar.eggemann@arm.com
Cc: joel@joelfernandes.org
Cc: juri.lelli@redhat.com
Cc: luca.abeni@santannapisa.it
Cc: patrick.bellasi@arm.com
Cc: quentin.perret@arm.com
Cc: rjw@rjwysocki.net
Cc: valentin.schneider@arm.com
Cc: viresh.kumar@linaro.org
Link: http://lkml.kernel.org/r/1530200714-4504-10-git-send-email-vincent.guittot@linaro.orgSigned-off-by: NIngo Molnar <mingo@kernel.org>
      523e979d
    • V
      sched/dl: Add dl_rq utilization tracking · 3727e0e1
      由 Vincent Guittot 提交于 
      Similarly to what happens with RT tasks, CFS tasks can be preempted by DL
tasks and the CFS's utilization might no longer describes the real
utilization level.

Current DL bandwidth reflects the requirements to meet deadline when tasks are
enqueued but not the current utilization of the DL sched class. We track
DL class utilization to estimate the system utilization.
Signed-off-by: NVincent Guittot <vincent.guittot@linaro.org>
Signed-off-by: NPeter Zijlstra (Intel) <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Morten.Rasmussen@arm.com
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: claudio@evidence.eu.com
Cc: daniel.lezcano@linaro.org
Cc: dietmar.eggemann@arm.com
Cc: joel@joelfernandes.org
Cc: juri.lelli@redhat.com
Cc: luca.abeni@santannapisa.it
Cc: patrick.bellasi@arm.com
Cc: quentin.perret@arm.com
Cc: rjw@rjwysocki.net
Cc: valentin.schneider@arm.com
Cc: viresh.kumar@linaro.org
Link: http://lkml.kernel.org/r/1530200714-4504-5-git-send-email-vincent.guittot@linaro.orgSigned-off-by: NIngo Molnar <mingo@kernel.org>
      3727e0e1
    • J
      sched/deadline: Fix switched_from_dl() warning · e117cb52
      由 Juri Lelli 提交于 
      Mark noticed that syzkaller is able to reliably trigger the following warning:

  dl_rq->running_bw > dl_rq->this_bw
  WARNING: CPU: 1 PID: 153 at kernel/sched/deadline.c:124 switched_from_dl+0x454/0x608
  Kernel panic - not syncing: panic_on_warn set ...

  CPU: 1 PID: 153 Comm: syz-executor253 Not tainted 4.18.0-rc3+ #29
  Hardware name: linux,dummy-virt (DT)
  Call trace:
   dump_backtrace+0x0/0x458
   show_stack+0x20/0x30
   dump_stack+0x180/0x250
   panic+0x2dc/0x4ec
   __warn_printk+0x0/0x150
   report_bug+0x228/0x2d8
   bug_handler+0xa0/0x1a0
   brk_handler+0x2f0/0x568
   do_debug_exception+0x1bc/0x5d0
   el1_dbg+0x18/0x78
   switched_from_dl+0x454/0x608
   __sched_setscheduler+0x8cc/0x2018
   sys_sched_setattr+0x340/0x758
   el0_svc_naked+0x30/0x34

syzkaller reproducer runs a bunch of threads that constantly switch
between DEADLINE and NORMAL classes while interacting through futexes.

The splat above is caused by the fact that if a DEADLINE task is setattr
back to NORMAL while in non_contending state (blocked on a futex -
inactive timer armed), its contribution to running_bw is not removed
before sub_rq_bw() gets called (!task_on_rq_queued() branch) and the
latter sees running_bw > this_bw.

Fix it by removing a task contribution from running_bw if the task is
not queued and in non_contending state while switched to a different
class.
Reported-by: NMark Rutland <mark.rutland@arm.com>
Signed-off-by: NJuri Lelli <juri.lelli@redhat.com>
Signed-off-by: NPeter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: NDaniel Bristot de Oliveira <bristot@redhat.com>
Reviewed-by: NLuca Abeni <luca.abeni@santannapisa.it>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: claudio@evidence.eu.com
Cc: rostedt@goodmis.org
Link: http://lkml.kernel.org/r/20180711072948.27061-1-juri.lelli@redhat.comSigned-off-by: NIngo Molnar <mingo@kernel.org>
      e117cb52
  7. 31 5月, 2018 1 次提交
    • J
      sched/deadline: Fix missing clock update · ecda2b66
      由 Juri Lelli 提交于 
      A missing clock update is causing the following warning:

 rq->clock_update_flags < RQCF_ACT_SKIP
 WARNING: CPU: 10 PID: 0 at kernel/sched/sched.h:963 inactive_task_timer+0x5d6/0x720
 Call Trace:
  <IRQ>
  __hrtimer_run_queues+0x10f/0x530
  hrtimer_interrupt+0xe5/0x240
  smp_apic_timer_interrupt+0x79/0x2b0
  apic_timer_interrupt+0xf/0x20
  </IRQ>
  do_idle+0x203/0x280
  cpu_startup_entry+0x6f/0x80
  start_secondary+0x1b0/0x200
  secondary_startup_64+0xa5/0xb0
 hardirqs last  enabled at (793919): [<ffffffffa27c5f6e>] cpuidle_enter_state+0x9e/0x360
 hardirqs last disabled at (793920): [<ffffffffa2a0096e>] interrupt_entry+0xce/0xe0
 softirqs last  enabled at (793922): [<ffffffffa20bef78>] irq_enter+0x68/0x70
 softirqs last disabled at (793921): [<ffffffffa20bef5d>] irq_enter+0x4d/0x70

This happens because inactive_task_timer() calls sub_running_bw() (if
TASK_DEAD and non_contending) that might trigger a schedutil update,
which might access the clock. Clock is however currently updated only
later in inactive_task_timer() function.

Fix the problem by updating the clock right after task_rq_lock().
Reported-by: Nkernel test robot <xiaolong.ye@intel.com>
Signed-off-by: NJuri Lelli <juri.lelli@redhat.com>
Signed-off-by: NPeter Zijlstra (Intel) <peterz@infradead.org>
Cc: Claudio Scordino <claudio@evidence.eu.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Luca Abeni <luca.abeni@santannapisa.it>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/20180530160809.9074-1-juri.lelli@redhat.comSigned-off-by: NIngo Molnar <mingo@kernel.org>
      ecda2b66
  9. 18 5月, 2018 2 次提交
  11. 05 4月, 2018 1 次提交
  13. 09 3月, 2018 1 次提交
  15. 04 3月, 2018 2 次提交
    • I
      sched/deadline, rt: Rename queue_push_tasks/queue_pull_task to create separate namespace · 02d8ec94
      由 Ingo Molnar 提交于 
      There are similarly named functions in both of these modules:

  kernel/sched/deadline.c:static inline void queue_push_tasks(struct rq *rq)
  kernel/sched/deadline.c:static inline void queue_pull_task(struct rq *rq)
  kernel/sched/deadline.c:static inline void queue_push_tasks(struct rq *rq)
  kernel/sched/deadline.c:static inline void queue_pull_task(struct rq *rq)
  kernel/sched/deadline.c:	queue_push_tasks(rq);
  kernel/sched/deadline.c:	queue_pull_task(rq);
  kernel/sched/deadline.c:			queue_push_tasks(rq);
  kernel/sched/deadline.c:			queue_pull_task(rq);
  kernel/sched/rt.c:static inline void queue_push_tasks(struct rq *rq)
  kernel/sched/rt.c:static inline void queue_pull_task(struct rq *rq)
  kernel/sched/rt.c:static inline void queue_push_tasks(struct rq *rq)
  kernel/sched/rt.c:	queue_push_tasks(rq);
  kernel/sched/rt.c:	queue_pull_task(rq);
  kernel/sched/rt.c:			queue_push_tasks(rq);
  kernel/sched/rt.c:			queue_pull_task(rq);

... which makes it harder to grep for them. Prefix them with
deadline_ and rt_, respectively.

Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: NIngo Molnar <mingo@kernel.org>
      02d8ec94
    • I
      sched/headers: Simplify and clean up header usage in the scheduler · 325ea10c
      由 Ingo Molnar 提交于 
      Do the following cleanups and simplifications:

 - sched/sched.h already includes <asm/paravirt.h>, so no need to
   include it in sched/core.c again.

 - order the <linux/sched/*.h> headers alphabetically

 - add all <linux/sched/*.h> headers to kernel/sched/sched.h

 - remove all unnecessary includes from the .c files that
   are already included in kernel/sched/sched.h.

Finally, make all scheduler .c files use a single common header:

  #include "sched.h"

... which now contains a union of the relied upon headers.

This makes the various .c files easier to read and easier to handle.

Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: NIngo Molnar <mingo@kernel.org>
      325ea10c
  17. 03 3月, 2018 1 次提交
    • I
      sched: Clean up and harmonize the coding style of the scheduler code base · 97fb7a0a
      由 Ingo Molnar 提交于 
      A good number of small style inconsistencies have accumulated
in the scheduler core, so do a pass over them to harmonize
all these details:

 - fix speling in comments,

 - use curly braces for multi-line statements,

 - remove unnecessary parentheses from integer literals,

 - capitalize consistently,

 - remove stray newlines,

 - add comments where necessary,

 - remove invalid/unnecessary comments,

 - align structure definitions and other data types vertically,

 - add missing newlines for increased readability,

 - fix vertical tabulation where it's misaligned,

 - harmonize preprocessor conditional block labeling
   and vertical alignment,

 - remove line-breaks where they uglify the code,

 - add newline after local variable definitions,

No change in functionality:

  md5:
     1191fa0a890cfa8132156d2959d7e9e2  built-in.o.before.asm
     1191fa0a890cfa8132156d2959d7e9e2  built-in.o.after.asm

Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: NIngo Molnar <mingo@kernel.org>
      97fb7a0a
  19. 21 2月, 2018 1 次提交
    • F
      sched/isolation: Offload residual 1Hz scheduler tick · d84b3131
      由 Frederic Weisbecker 提交于 
      When a CPU runs in full dynticks mode, a 1Hz tick remains in order to
keep the scheduler stats alive. However this residual tick is a burden
for bare metal tasks that can't stand any interruption at all, or want
to minimize them.

The usual boot parameters "nohz_full=" or "isolcpus=nohz" will now
outsource these scheduler ticks to the global workqueue so that a
housekeeping CPU handles those remotely. The sched_class::task_tick()
implementations have been audited and look safe to be called remotely
as the target runqueue and its current task are passed in parameter
and don't seem to be accessed locally.

Note that in the case of using isolcpus, it's still up to the user to
affine the global workqueues to the housekeeping CPUs through
/sys/devices/virtual/workqueue/cpumask or domains isolation
"isolcpus=nohz,domain".
Signed-off-by: NFrederic Weisbecker <frederic@kernel.org>
Reviewed-by: NThomas Gleixner <tglx@linutronix.de>
Acked-by: NPeter Zijlstra <peterz@infradead.org>
Cc: Chris Metcalf <cmetcalf@mellanox.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Luiz Capitulino <lcapitulino@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Wanpeng Li <kernellwp@gmail.com>
Link: http://lkml.kernel.org/r/1519186649-3242-6-git-send-email-frederic@kernel.orgSigned-off-by: NIngo Molnar <mingo@kernel.org>
      d84b3131
  21. 13 2月, 2018 1 次提交
  23. 10 1月, 2018 4 次提交
  25. 02 11月, 2017 1 次提交
    • G
      License cleanup: add SPDX GPL-2.0 license identifier to files with no license · b2441318
      由 Greg Kroah-Hartman 提交于 
      Many source files in the tree are missing licensing information, which
makes it harder for compliance tools to determine the correct license.

By default all files without license information are under the default
license of the kernel, which is GPL version 2.

Update the files which contain no license information with the 'GPL-2.0'
SPDX license identifier.  The SPDX identifier is a legally binding
shorthand, which can be used instead of the full boiler plate text.

This patch is based on work done by Thomas Gleixner and Kate Stewart and
Philippe Ombredanne.

How this work was done:

Patches were generated and checked against linux-4.14-rc6 for a subset of
the use cases:
 - file had no licensing information it it.
 - file was a */uapi/* one with no licensing information in it,
 - file was a */uapi/* one with existing licensing information,

Further patches will be generated in subsequent months to fix up cases
where non-standard license headers were used, and references to license
had to be inferred by heuristics based on keywords.

The analysis to determine which SPDX License Identifier to be applied to
a file was done in a spreadsheet of side by side results from of the
output of two independent scanners (ScanCode & Windriver) producing SPDX
tag:value files created by Philippe Ombredanne.  Philippe prepared the
base worksheet, and did an initial spot review of a few 1000 files.

The 4.13 kernel was the starting point of the analysis with 60,537 files
assessed.  Kate Stewart did a file by file comparison of the scanner
results in the spreadsheet to determine which SPDX license identifier(s)
to be applied to the file. She confirmed any determination that was not
immediately clear with lawyers working with the Linux Foundation.

Criteria used to select files for SPDX license identifier tagging was:
 - Files considered eligible had to be source code files.
 - Make and config files were included as candidates if they contained >5
   lines of source
 - File already had some variant of a license header in it (even if <5
   lines).

All documentation files were explicitly excluded.

The following heuristics were used to determine which SPDX license
identifiers to apply.

 - when both scanners couldn't find any license traces, file was
   considered to have no license information in it, and the top level
   COPYING file license applied.

   For non */uapi/* files that summary was:

   SPDX license identifier                            # files
   ---------------------------------------------------|-------
   GPL-2.0                                              11139

   and resulted in the first patch in this series.

   If that file was a */uapi/* path one, it was "GPL-2.0 WITH
   Linux-syscall-note" otherwise it was "GPL-2.0".  Results of that was:

   SPDX license identifier                            # files
   ---------------------------------------------------|-------
   GPL-2.0 WITH Linux-syscall-note                        930

   and resulted in the second patch in this series.

 - if a file had some form of licensing information in it, and was one
   of the */uapi/* ones, it was denoted with the Linux-syscall-note if
   any GPL family license was found in the file or had no licensing in
   it (per prior point).  Results summary:

   SPDX license identifier                            # files
   ---------------------------------------------------|------
   GPL-2.0 WITH Linux-syscall-note                       270
   GPL-2.0+ WITH Linux-syscall-note                      169
   ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause)    21
   ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause)    17
   LGPL-2.1+ WITH Linux-syscall-note                      15
   GPL-1.0+ WITH Linux-syscall-note                       14
   ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause)    5
   LGPL-2.0+ WITH Linux-syscall-note                       4
   LGPL-2.1 WITH Linux-syscall-note                        3
   ((GPL-2.0 WITH Linux-syscall-note) OR MIT)              3
   ((GPL-2.0 WITH Linux-syscall-note) AND MIT)             1

   and that resulted in the third patch in this series.

 - when the two scanners agreed on the detected license(s), that became
   the concluded license(s).

 - when there was disagreement between the two scanners (one detected a
   license but the other didn't, or they both detected different
   licenses) a manual inspection of the file occurred.

 - In most cases a manual inspection of the information in the file
   resulted in a clear resolution of the license that should apply (and
   which scanner probably needed to revisit its heuristics).

 - When it was not immediately clear, the license identifier was
   confirmed with lawyers working with the Linux Foundation.

 - If there was any question as to the appropriate license identifier,
   the file was flagged for further research and to be revisited later
   in time.

In total, over 70 hours of logged manual review was done on the
spreadsheet to determine the SPDX license identifiers to apply to the
source files by Kate, Philippe, Thomas and, in some cases, confirmation
by lawyers working with the Linux Foundation.

Kate also obtained a third independent scan of the 4.13 code base from
FOSSology, and compared selected files where the other two scanners
disagreed against that SPDX file, to see if there was new insights.  The
Windriver scanner is based on an older version of FOSSology in part, so
they are related.

Thomas did random spot checks in about 500 files from the spreadsheets
for the uapi headers and agreed with SPDX license identifier in the
files he inspected. For the non-uapi files Thomas did random spot checks
in about 15000 files.

In initial set of patches against 4.14-rc6, 3 files were found to have
copy/paste license identifier errors, and have been fixed to reflect the
correct identifier.

Additionally Philippe spent 10 hours this week doing a detailed manual
inspection and review of the 12,461 patched files from the initial patch
version early this week with:
 - a full scancode scan run, collecting the matched texts, detected
   license ids and scores
 - reviewing anything where there was a license detected (about 500+
   files) to ensure that the applied SPDX license was correct
 - reviewing anything where there was no detection but the patch license
   was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied
   SPDX license was correct

This produced a worksheet with 20 files needing minor correction.  This
worksheet was then exported into 3 different .csv files for the
different types of files to be modified.

These .csv files were then reviewed by Greg.  Thomas wrote a script to
parse the csv files and add the proper SPDX tag to the file, in the
format that the file expected.  This script was further refined by Greg
based on the output to detect more types of files automatically and to
distinguish between header and source .c files (which need different
comment types.)  Finally Greg ran the script using the .csv files to
generate the patches.
Reviewed-by: NKate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: NPhilippe Ombredanne <pombredanne@nexb.com>
Reviewed-by: NThomas Gleixner <tglx@linutronix.de>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      b2441318
  27. 10 10月, 2017 2 次提交
  29. 25 9月, 2017 1 次提交
  31. 09 9月, 2017 1 次提交
  33. 10 8月, 2017 3 次提交
  35. 01 8月, 2017 1 次提交
    • V
      sched: cpufreq: Allow remote cpufreq callbacks · 674e7541
      由 Viresh Kumar 提交于 
      With Android UI and benchmarks the latency of cpufreq response to
certain scheduling events can become very critical. Currently, callbacks
into cpufreq governors are only made from the scheduler if the target
CPU of the event is the same as the current CPU. This means there are
certain situations where a target CPU may not run the cpufreq governor
for some time.

One testcase to show this behavior is where a task starts running on
CPU0, then a new task is also spawned on CPU0 by a task on CPU1. If the
system is configured such that the new tasks should receive maximum
demand initially, this should result in CPU0 increasing frequency
immediately. But because of the above mentioned limitation though, this
does not occur.

This patch updates the scheduler core to call the cpufreq callbacks for
remote CPUs as well.

The schedutil, ondemand and conservative governors are updated to
process cpufreq utilization update hooks called for remote CPUs where
the remote CPU is managed by the cpufreq policy of the local CPU.

The intel_pstate driver is updated to always reject remote callbacks.

This is tested with couple of usecases (Android: hackbench, recentfling,
galleryfling, vellamo, Ubuntu: hackbench) on ARM hikey board (64 bit
octa-core, single policy). Only galleryfling showed minor improvements,
while others didn't had much deviation.

The reason being that this patch only targets a corner case, where
following are required to be true to improve performance and that
doesn't happen too often with these tests:

- Task is migrated to another CPU.
- The task has high demand, and should take the target CPU to higher
  OPPs.
- And the target CPU doesn't call into the cpufreq governor until the
  next tick.

Based on initial work from Steve Muckle.
Signed-off-by: NViresh Kumar <viresh.kumar@linaro.org>
Acked-by: NSaravana Kannan <skannan@codeaurora.org>
Acked-by: NPeter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>
      674e7541
  37. 14 7月, 2017 1 次提交
  39. 23 6月, 2017 1 次提交
  41. 08 6月, 2017 10 次提交