Fix following warnings:
process_32.c:67:6: warning: symbol 'arch_cpu_idle' was not declared. Should it be static?
process_32.c:257:16: warning: symbol 'sparc_do_fork' was not declared. Should it be static?
process_32.c:411:5: warning: symbol 'dump_fpu' was not declared. Should it be static?

Add missing includes and add one missing prototype.
Signed-off-by: NSam Ravnborg <sam@ravnborg.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Fix following warnings:
irq_32.c:239:5: warning: symbol 'sparc_floppy_request_irq' was not declared. Should it be static?
irq_32.c:294:24: warning: symbol 'fdc_status' was not declared. Should it be static?
irq_32.c:297:6: warning: symbol 'pdma_vaddr' was not declared. Should it be static?
irq_32.c:300:15: warning: symbol 'pdma_size' was not declared. Should it be static?
irq_32.c:303:14: warning: symbol 'doing_pdma' was not declared. Should it be static?
irq_32.c:306:6: warning: symbol 'pdma_base' was not declared. Should it be static?
irq_32.c:309:15: warning: symbol 'pdma_areasize' was not declared. Should it be static?
irq_32.c:317:6: warning: symbol 'sparc_floppy_irq' was not declared. Should it be static?

The floppy parts were all added to iasm/setup.h - no other header files looked obvious.
floppy_32.h was not an option as this file can only be included once from the
floppy driver.
Signed-off-by: NSam Ravnborg <sam@ravnborg.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Fix following warnings:
sun4d_irq.c:146:6: warning: symbol 'sun4d_handler_irq' was not declared. Should it be static?
sun4d_irq.c:239:17: warning: symbol 'sun4d_irq' was not declared. Should it be static?
sun4d_irq.c:288:14: warning: symbol '_sun4d_build_device_irq' was not declared. Should it be static?
sun4d_irq.c:323:14: warning: symbol 'sun4d_build_device_irq' was not declared. Should it be static?
sun4d_irq.c:386:14: warning: symbol 'sun4d_build_timer_irq' was not declared. Should it be static?
sun4d_irq.c:482:13: warning: symbol 'sun4d_init_sbi_irq' was not declared. Should it be static?

Apply static when applicable, otherwise add prototype
Signed-off-by: NSam Ravnborg <sam@ravnborg.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Fix following warnings:

sun4m_irq.c:308:6: warning: symbol 'sun4m_nmi' was not declared. Should it be static?
sun4m_irq.c:396:28: warning: incorrect type in assignment (different address spaces)
sun4m_irq.c:396:28:    expected unsigned int volatile *extern [addressable] [toplevel] master_l10_counter
sun4d_irq.c:469:28: warning: incorrect type in assignment (different address spaces)
sun4d_irq.c:469:28:    expected unsigned int volatile *extern [addressable] [toplevel] master_l10_counter

master_l10_counter is a pointer to __iomem - add annotations.
Signed-off-by: NSam Ravnborg <sam@ravnborg.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Fix following warning:
traps_32.c:47:6: error: symbol 'die_if_kernel' redeclared with different type - different modifiers

Add __noreturn to both definition and declaration
Signed-off-by: NSam Ravnborg <sam@ravnborg.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Fix following warnings:
srmmu.c:870:13: warning: symbol 'srmmu_paging_init' was not declared. Should it be static?
iommu.c:430:13: warning: symbol 'ld_mmu_iommu' was not declared. Should it be static?
leon_mm.c:21:5: warning: symbol 'srmmu_swprobe_trace' was not declared. Should it be static?

Add proper prototypes or define static to fix them.
Signed-off-by: NSam Ravnborg <sam@ravnborg.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Fix following warnings:
srmmu.c:78:5: warning: symbol 'flush_page_for_dma_global' was not declared. Should it be static?
srmmu.c:85:5: warning: symbol 'viking_mxcc_present' was not declared. Should it be static?
srmmu.c:103:6: warning: symbol 'srmmu_nocache_bitmap' was not declared. Should it be static?
srmmu.c:176:24: warning: Using plain integer as NULL pointer
srmmu.c:731:46: warning: Using plain integer as NULL pointer
srmmu.c:731:46: warning: Using plain integer as NULL pointer
srmmu.c:731:46: warning: Using plain integer as NULL pointer
srmmu.c:870:13: warning: symbol 'srmmu_paging_init' was not declared. Should it be static?

Add proper prototypes in mm_32.h and drop local prototype in init_32.c
Replace 0 with NULL
Signed-off-by: NSam Ravnborg <sam@ravnborg.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Fix following warning:
init_32.c:112:22: warning: symbol 'bootmem_init' was not declared. Should it be static?

Fix by adding a proper prototype in pgtable_32.h and drop
the local prototype in srmmu.c
Signed-off-by: NSam Ravnborg <sam@ravnborg.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Fix following warning:
fault_32.c:38:24: error: symbol 'unhandled_fault' redeclared with different type - different modifiers

When this warning was fixed several new warnings popped up - fix them too.
Signed-off-by: NSam Ravnborg <sam@ravnborg.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This file will be used for more than just srmmu stuff, so the old name was misleading.
Signed-off-by: NSam Ravnborg <sam@ravnborg.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Merge tag 'trace-fixes-v3.15-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace

Pull ftrace bugfix from Steven Rostedt:
 "Takao Indoh reported that he was able to cause a ftrace bug while
  loading a module and enabling function tracing at the same time.

  He uncovered a race where the module when loaded will convert the
  calls to mcount into nops, and expects the module's text to be RW.
  But when function tracing is enabled, it will convert all kernel text
  (core and module) from RO to RW to convert the nops to calls to ftrace
  to record the function.  After the convertion, it will convert all the
  text back from RW to RO.

  The issue is, it will also convert the module's text that is loading.
  If it converts it to RO before ftrace does its conversion, it will
  cause ftrace to fail and require a reboot to fix it again.

  This patch moves the ftrace module update that converts calls to
  mcount into nops to be done when the module state is still
  MODULE_STATE_UNFORMED.  This will ignore the module when the text is
  being converted from RW back to RO"

* tag 'trace-fixes-v3.15-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
  ftrace/module: Hardcode ftrace_module_init() call into load_module()

Pull devicetree bug fixes from Grant Likely:
 "These are some important bug fixes that need to get into v3.15.

  This branch contains a pair of important bug fixes for the DT code:

   - Fix some incorrect binding property names before they enter common
     usage

   - Fix bug where some platform devices will be unable to get their
     interrupt number when they depend on an interrupt controller that
     is not available at device creation time.  This is a problem
     causing mainline to fail on a number of ARM platforms"

* tag 'dt-for-linus' of git://git.secretlab.ca/git/linux:
  of/irq: do irq resolution in platform_get_irq
  of: selftest: add deferred probe interrupt test
  dt: Fix binding typos in clock-names and interrupt-names

Pull powerpc fixes from Ben Herrenschmidt:
 "Here is a bunch of post-merge window fixes that have been accumulating
  in patchwork while I was on vacation or buried under other stuff last
  week.

  We have the now usual batch of LE fixes from Anton (sadly some new
  stuff that went into this merge window had endian issues, we'll try to
  make sure we do better next time)

  Some fixes and cleanups to the new 24x7 performance monitoring stuff
  (mostly typos and cleaning up printk's)

  A series of fixes for an issue with our runlatch bit, which wasn't set
  properly for offlined threads/cores and under KVM, causing potentially
  some counters to misbehave along with possible power management
  issues.

  A fix for kexec nasty race where the new kernel wouldn't "see" the
  secondary processors having reached back into firmware in time.

  And finally a few other misc (and pretty simple) bug fixes"

* 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc: (33 commits)
  powerpc/4xx: Fix section mismatch in ppc4xx_pci.c
  ppc/kvm: Clear the runlatch bit of a vcpu before napping
  ppc/kvm: Set the runlatch bit of a CPU just before starting guest
  ppc/powernv: Set the runlatch bits correctly for offline cpus
  powerpc/pseries: Protect remove_memory() with device hotplug lock
  powerpc: Fix error return in rtas_flash module init
  powerpc: Bump BOOT_COMMAND_LINE_SIZE to 2048
  powerpc: Bump COMMAND_LINE_SIZE to 2048
  powerpc: Rename duplicate COMMAND_LINE_SIZE define
  powerpc/perf/hv-24x7: Catalog version number is be64, not be32
  powerpc/perf/hv-24x7: Remove [static 4096], sparse chokes on it
  powerpc/perf/hv-24x7: Use (unsigned long) not (u32) values when calling plpar_hcall_norets()
  powerpc/perf/hv-gpci: Make device attr static
  powerpc/perf/hv_gpci: Probe failures use pr_debug(), and padding reduced
  powerpc/perf/hv_24x7: Probe errors changed to pr_debug(), padding fixed
  powerpc/mm: Fix tlbie to add AVAL fields for 64K pages
  powerpc/powernv: Fix little endian issues in OPAL dump code
  powerpc/powernv: Create OPAL sglist helper functions and fix endian issues
  powerpc/powernv: Fix little endian issues in OPAL error log code
  powerpc/powernv: Fix little endian issues with opal_do_notifier calls
  ...

BUG_ON() is a big hammer, and should be used _only_ if there is some
major corruption that you cannot possibly recover from, making it
imperative that the current process (and possibly the whole machine) be
terminated with extreme prejudice.

The trivial sanity check in the vmacache code is *not* such a fatal
error.  Recovering from it is absolutely trivial, and using BUG_ON()
just makes it harder to debug for no actual advantage.

To make matters worse, the placement of the BUG_ON() (only if the range
check matched) actually makes it harder to hit the sanity check to begin
with, so _if_ there is a bug (and we just got a report from Srivatsa
Bhat that this can indeed trigger), it is harder to debug not just
because the machine is possibly dead, but because we don't have better
coverage.

BUG_ON() must *die*.  Maybe we should add a checkpatch warning for it,
because it is simply just about the worst thing you can ever do if you
hit some "this cannot happen" situation.
Reported-by: NSrivatsa S. Bhat <srivatsa.bhat@linux.vnet.ibm.com>
Cc: Davidlohr Bueso <davidlohr@hp.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

A race exists between module loading and enabling of function tracer.

	CPU 1				CPU 2
	-----				-----
  load_module()
   module->state = MODULE_STATE_COMING

				register_ftrace_function()
				 mutex_lock(&ftrace_lock);
				 ftrace_startup()
				  update_ftrace_function();
				   ftrace_arch_code_modify_prepare()
				    set_all_module_text_rw();
				   <enables-ftrace>
				    ftrace_arch_code_modify_post_process()
				     set_all_module_text_ro();

				[ here all module text is set to RO,
				  including the module that is
				  loading!! ]

   blocking_notifier_call_chain(MODULE_STATE_COMING);
    ftrace_init_module()

     [ tries to modify code, but it's RO, and fails!
       ftrace_bug() is called]

When this race happens, ftrace_bug() will produces a nasty warning and
all of the function tracing features will be disabled until reboot.

The simple solution is to treate module load the same way the core
kernel is treated at boot. To hardcode the ftrace function modification
of converting calls to mcount into nops. This is done in init/main.c
there's no reason it could not be done in load_module(). This gives
a better control of the changes and doesn't tie the state of the
module to its notifiers as much. Ftrace is special, it needs to be
treated as such.

The reason this would work, is that the ftrace_module_init() would be
called while the module is in MODULE_STATE_UNFORMED, which is ignored
by the set_all_module_text_ro() call.

Link: http://lkml.kernel.org/r/1395637826-3312-1-git-send-email-indou.takao@jp.fujitsu.comReported-by: NTakao Indoh <indou.takao@jp.fujitsu.com>
Acked-by: NRusty Russell <rusty@rustcorp.com.au>
Cc: stable@vger.kernel.org # 2.6.38+
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>

This patch fixes this section mismatch:

WARNING: vmlinux.o(.text+0x1efc4): Section mismatch in reference from
the function apm821xx_pciex_init_port_hw() to the function
.init.text:ppc4xx_pciex_wait_on_sdr.isra.9()

The function apm821xx_pciex_init_port_hw() references the function
__init ppc4xx_pciex_wait_on_sdr.isra.9().  This is often because
apm821xx_pciex_init_port_hw lacks a __init annotation or the
annotation of ppc4xx_pciex_wait_on_sdr.isra.9 is wrong.

apm821xx_pciex_init_port_hw is only referenced by a struct in
__initdata, so it should be safe to add __init to
apm821xx_pciex_init_port_hw.
Signed-off-by: NAlistair Popple <alistair@popple.id.au>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

When the guest cedes the vcpu or the vcpu has no guest to
run it naps. Clear the runlatch bit of the vcpu before
napping to indicate an idle cpu.
Signed-off-by: NPreeti U Murthy <preeti@linux.vnet.ibm.com>
Acked-by: NPaul Mackerras <paulus@samba.org>
Reviewed-by: NSrivatsa S. Bhat <srivatsa.bhat@linux.vnet.ibm.com>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

The secondary threads in the core are kept offline before launching guests
in kvm on powerpc: "371fefd6:KVM: PPC: Allow book3s_hv guests to use
SMT processor modes."

Hence their runlatch bits are cleared. When the secondary threads are called
in to start a guest, their runlatch bits need to be set to indicate that they
are busy. The primary thread has its runlatch bit set though, but there is no
harm in setting this bit once again. Hence set the runlatch bit for all
threads before they start guest.
Signed-off-by: NPreeti U Murthy <preeti@linux.vnet.ibm.com>
Acked-by: NPaul Mackerras <paulus@samba.org>
Reviewed-by: NSrivatsa S. Bhat <srivatsa.bhat@linux.vnet.ibm.com>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

Up until now we have been setting the runlatch bits for a busy CPU and
clearing it when a CPU enters idle state. The runlatch bit has thus
been consistent with the utilization of a CPU as long as the CPU is online.

However when a CPU is hotplugged out the runlatch bit is not cleared. It
needs to be cleared to indicate an unused CPU. Hence this patch has the
runlatch bit cleared for an offline CPU just before entering an idle state
and sets it immediately after it exits the idle state.
Signed-off-by: NPreeti U Murthy <preeti@linux.vnet.ibm.com>
Acked-by: NPaul Mackerras <paulus@samba.org>
Reviewed-by: NSrivatsa S. Bhat <srivatsa.bhat@linux.vnet.ibm.com>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

While testing memory hot-remove, I found following dead lock:

Process #1141 is drmgr, trying to remove some memory, i.e. memory499.
It holds the memory_hotplug_mutex, and blocks when trying to remove file
"online" under dir memory499, in kernfs_drain(), at
        wait_event(root->deactivate_waitq,
                   atomic_read(&kn->active) == KN_DEACTIVATED_BIAS);

Process #1120 is trying to online memory499 by
   echo 1 > memory499/online

In .kernfs_fop_write, it uses kernfs_get_active() to increase
&kn->active, thus blocking process #1141. While itself is blocked later
when trying to acquire memory_hotplug_mutex, which is held by process

The backtrace of both processes are shown below:

[<c000000001b18600>] 0xc000000001b18600
[<c000000000015044>] .__switch_to+0x144/0x200
[<c000000000263ca4>] .online_pages+0x74/0x7b0
[<c00000000055b40c>] .memory_subsys_online+0x9c/0x150
[<c00000000053cbe8>] .device_online+0xb8/0x120
[<c00000000053cd04>] .online_store+0xb4/0xc0
[<c000000000538ce4>] .dev_attr_store+0x64/0xa0
[<c00000000030f4ec>] .sysfs_kf_write+0x7c/0xb0
[<c00000000030e574>] .kernfs_fop_write+0x154/0x1e0
[<c000000000268450>] .vfs_write+0xe0/0x260
[<c000000000269144>] .SyS_write+0x64/0x110
[<c000000000009ffc>] syscall_exit+0x0/0x7c

[<c000000001b18600>] 0xc000000001b18600
[<c000000000015044>] .__switch_to+0x144/0x200
[<c00000000030be14>] .__kernfs_remove+0x204/0x300
[<c00000000030d428>] .kernfs_remove_by_name_ns+0x68/0xf0
[<c00000000030fb38>] .sysfs_remove_file_ns+0x38/0x60
[<c000000000539354>] .device_remove_attrs+0x54/0xc0
[<c000000000539fd8>] .device_del+0x158/0x250
[<c00000000053a104>] .device_unregister+0x34/0xa0
[<c00000000055bc14>] .unregister_memory_section+0x164/0x170
[<c00000000024ee18>] .__remove_pages+0x108/0x4c0
[<c00000000004b590>] .arch_remove_memory+0x60/0xc0
[<c00000000026446c>] .remove_memory+0x8c/0xe0
[<c00000000007f9f4>] .pseries_remove_memblock+0xd4/0x160
[<c00000000007fcfc>] .pseries_memory_notifier+0x27c/0x290
[<c0000000008ae6cc>] .notifier_call_chain+0x8c/0x100
[<c0000000000d858c>] .__blocking_notifier_call_chain+0x6c/0xe0
[<c00000000071ddec>] .of_property_notify+0x7c/0xc0
[<c00000000071ed3c>] .of_update_property+0x3c/0x1b0
[<c0000000000756cc>] .ofdt_write+0x3dc/0x740
[<c0000000002f60fc>] .proc_reg_write+0xac/0x110
[<c000000000268450>] .vfs_write+0xe0/0x260
[<c000000000269144>] .SyS_write+0x64/0x110
[<c000000000009ffc>] syscall_exit+0x0/0x7c

This patch uses lock_device_hotplug() to protect remove_memory() called
in pseries_remove_memblock(), which is also stated before function
remove_memory():

 * NOTE: The caller must call lock_device_hotplug() to serialize hotplug
 * and online/offline operations before this call, as required by
 * try_offline_node().
 */
void __ref remove_memory(int nid, u64 start, u64 size)

With this lock held, the other process(#1120 above) trying to online the
memory block will retry the system call when calling
lock_device_hotplug_sysfs(), and finally find No such device error.
Signed-off-by: NLi Zhong <zhong@linux.vnet.ibm.com>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

module_init should return 0 or a negative errno.
Signed-off-by: NAnton Blanchard <anton@samba.org>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

Bump the boot wrapper BOOT_COMMAND_LINE_SIZE to match the
kernel.
Signed-off-by: NAnton Blanchard <anton@samba.org>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

I've had a report that the current limit is too small for
an automated network based installer. Bump it.
Signed-off-by: NAnton Blanchard <anton@samba.org>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

We have two definitions of COMMAND_LINE_SIZE, one for the kernel
and one for the boot wrapper. I assume this is so the boot
wrapper can be self sufficient and not rely on kernel headers.

Having two defines with the same name is confusing, I just
updated the wrong one when trying to bump it.

Make the boot wrapper define unique by calling it
BOOT_COMMAND_LINE_SIZE.
Signed-off-by: NAnton Blanchard <anton@samba.org>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

The catalog version number was changed from a be32 (with proceeding
32bits of padding) to a be64, update the code to treat it as a be64
Signed-off-by: NCody P Schafer <cody@linux.vnet.ibm.com>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

Signed-off-by: NCody P Schafer <cody@linux.vnet.ibm.com>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

Signed-off-by: NCody P Schafer <cody@linux.vnet.ibm.com>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

Signed-off-by: NCody P Schafer <cody@linux.vnet.ibm.com>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

fixup for "powerpc/perf: Add support for the hv gpci (get performance
counter info) interface".

Makes the "not enabled" message less awful (and hidden unless
debugging).
Signed-off-by: NCody P Schafer <cody@linux.vnet.ibm.com>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

fixup for "powerpc/perf: Add support for the hv 24x7 interface"

Makes the "not enabled" message less awful (and hides it in most cases).
Signed-off-by: NCody P Schafer <cody@linux.vnet.ibm.com>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

The if condition check was based on a draft ISA doc. Remove the same.
Signed-off-by: NAneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

Signed-off-by: NAnton Blanchard <anton@samba.org>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

We have two copies of code that creates an OPAL sg list. Consolidate
these into a common set of helpers and fix the endian issues.

The flash interface embedded a version number in the num_entries
field, whereas the dump interface did did not. Since versioning
wasn't added to the flash interface and it is impossible to add
this in a backwards compatible way, just remove it.
Signed-off-by: NAnton Blanchard <anton@samba.org>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

Fix little endian issues with the OPAL error log code.
Signed-off-by: NAnton Blanchard <anton@samba.org>
Reviewed-by: NStewart Smith <stewart@linux.vnet.ibm.com>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

The bitmap in opal_poll_events and opal_handle_interrupt is
big endian, so we need to byteswap it on little endian builds.
Signed-off-by: NAnton Blanchard <anton@samba.org>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

We had some duplication of the internal OPAL functions.
Signed-off-by: NAnton Blanchard <anton@samba.org>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

Using size_t in our APIs is asking for trouble, especially
when some OPAL calls use size_t pointers.
Signed-off-by: NAnton Blanchard <anton@samba.org>
Reviewed-by: NStewart Smith <stewart@linux.vnet.ibm.com>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

On PowerNV platform, we are holding an unnecessary refcount on a pci_dev, which
leads to the pci_dev is not destroyed when hotplugging a pci device.

This patch release the unnecessary refcount.
Signed-off-by: NWei Yang <weiyang@linux.vnet.ibm.com>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

During the EEH hotplug event, iommu_add_device() will be invoked three times
and two of them will trigger warning or error.

The three times to invoke the iommu_add_device() are:

    pci_device_add
       ...
       set_iommu_table_base_and_group   <- 1st time, fail
    device_add
       ...
       tce_iommu_bus_notifier           <- 2nd time, succees
    pcibios_add_pci_devices
       ...
       pcibios_setup_bus_devices        <- 3rd time, re-attach

The first time fails, since the dev->kobj->sd is not initialized. The
dev->kobj->sd is initialized in device_add().
The third time's warning is triggered by the re-attach of the iommu_group.

After applying this patch, the error

    iommu_tce: 0003:05:00.0 has not been added, ret=-14

and the warning

    [  204.123609] ------------[ cut here ]------------
    [  204.123645] WARNING: at arch/powerpc/kernel/iommu.c:1125
    [  204.123680] Modules linked in: xt_CHECKSUM nf_conntrack_netbios_ns nf_conntrack_broadcast ipt_MASQUERADE ip6t_REJECT bnep bluetooth 6lowpan_iphc rfkill xt_conntrack ebtable_nat ebtable_broute bridge stp llc mlx4_ib ib_sa ib_mad ib_core ib_addr ebtable_filter ebtables ip6table_nat nf_conntrack_ipv6 nf_defrag_ipv6 nf_nat_ipv6 ip6table_mangle ip6table_security ip6table_raw ip6table_filter ip6_tables iptable_nat nf_conntrack_ipv4 nf_defrag_ipv4 nf_nat_ipv4 nf_nat nf_conntrack iptable_mangle iptable_security iptable_raw bnx2x tg3 mlx4_core nfsd ptp mdio ses libcrc32c nfs_acl enclosure be2net pps_core shpchp lockd kvm uinput sunrpc binfmt_misc lpfc scsi_transport_fc ipr scsi_tgt
    [  204.124356] CPU: 18 PID: 650 Comm: eehd Not tainted 3.14.0-rc5yw+ #102
    [  204.124400] task: c0000027ed485670 ti: c0000027ed50c000 task.ti: c0000027ed50c000
    [  204.124453] NIP: c00000000003cf80 LR: c00000000006c648 CTR: c00000000006c5c0
    [  204.124506] REGS: c0000027ed50f440 TRAP: 0700   Not tainted  (3.14.0-rc5yw+)
    [  204.124558] MSR: 9000000000029032 <SF,HV,EE,ME,IR,DR,RI>  CR: 88008084  XER: 20000000
    [  204.124682] CFAR: c00000000006c644 SOFTE: 1
    GPR00: c00000000006c648 c0000027ed50f6c0 c000000001398380 c0000027ec260300
    GPR04: c0000027ea92c000 c00000000006ad00 c0000000016e41b0 0000000000000110
    GPR08: c0000000012cd4c0 0000000000000001 c0000027ec2602ff 0000000000000062
    GPR12: 0000000028008084 c00000000fdca200 c0000000000d1d90 c0000027ec281a80
    GPR16: 0000000000000000 0000000000000000 0000000000000000 0000000000000000
    GPR20: 0000000000000000 0000000000000000 0000000000000000 0000000000000001
    GPR24: 000000005342697b 0000000000002906 c000001fe6ac9800 c000001fe6ac9800
    GPR28: 0000000000000000 c0000000016e3a80 c0000027ea92c090 c0000027ea92c000
    [  204.125353] NIP [c00000000003cf80] .iommu_add_device+0x30/0x1f0
    [  204.125399] LR [c00000000006c648] .pnv_pci_ioda_dma_dev_setup+0x88/0xb0
    [  204.125443] Call Trace:
    [  204.125464] [c0000027ed50f6c0] [c0000027ed50f750] 0xc0000027ed50f750 (unreliable)
    [  204.125526] [c0000027ed50f750] [c00000000006c648] .pnv_pci_ioda_dma_dev_setup+0x88/0xb0
    [  204.125588] [c0000027ed50f7d0] [c000000000069cc8] .pnv_pci_dma_dev_setup+0x78/0x340
    [  204.125650] [c0000027ed50f870] [c000000000044408] .pcibios_setup_device+0x88/0x2f0
    [  204.125712] [c0000027ed50f940] [c000000000046040] .pcibios_setup_bus_devices+0x60/0xd0
    [  204.125774] [c0000027ed50f9c0] [c000000000043acc] .pcibios_add_pci_devices+0xdc/0x1c0
    [  204.125837] [c0000027ed50fa50] [c00000000086f970] .eeh_reset_device+0x36c/0x4f0
    [  204.125939] [c0000027ed50fb20] [c00000000003a2d8] .eeh_handle_normal_event+0x448/0x480
    [  204.126068] [c0000027ed50fbc0] [c00000000003a35c] .eeh_handle_event+0x4c/0x340
    [  204.126192] [c0000027ed50fc80] [c00000000003a74c] .eeh_event_handler+0xfc/0x1b0
    [  204.126319] [c0000027ed50fd30] [c0000000000d1ea0] .kthread+0x110/0x130
    [  204.126430] [c0000027ed50fe30] [c00000000000a460] .ret_from_kernel_thread+0x5c/0x7c
    [  204.126556] Instruction dump:
    [  204.126610] 7c0802a6 fba1ffe8 fbc1fff0 fbe1fff8 f8010010 f821ff71 7c7e1b78 60000000
    [  204.126787] 60000000 e87e0298 3143ffff 7d2a1910 <0b090000> 2fa90000 40de00c8 ebfe0218
    [  204.126966] ---[ end trace 6e7aefd80add2973 ]---

are cleared.

This patch removes iommu_add_device() in pnv_pci_ioda_dma_dev_setup(), which
revert part of the change in commit d905c5df(PPC: POWERNV: move
iommu_add_device earlier).
Signed-off-by: NWei Yang <weiyang@linux.vnet.ibm.com>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

With this patch I was able to update firmware on an LE kernel.
Signed-off-by: NAnton Blanchard <anton@samba.org>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>