On some recent Macbooks, the package length for the light sensors ALV0 and
ALV1 has changed from 6 to 10.  This patch allows for a variable package
length encompassing both variants.
Signed-off-by: NHenrik Rydberg <rydberg@euromail.se>
Cc: Nicolas Boichat <nicolas@boichat.ch>
Cc: Riki Oktarianto <rkoktarianto@gmail.com>
Cc: Mark M. Hoffman <mhoffman@lightlink.com>
Cc: Jean Delvare <khali@linux-fr.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The time to wait for a status change while reading or writing to the SMC
ports is a balance between read reliability and system performance.  The
current setting yields rougly three errors in a thousand when
simultaneously reading three different temperature values on a Macbook
Air.  This patch increases the setting to a value yielding roughly one
error in ten thousand, with no noticable system performance degradation.
Signed-off-by: NHenrik Rydberg <rydberg@euromail.se>
Cc: Nicolas Boichat <nicolas@boichat.ch>
Cc: Riki Oktarianto <rkoktarianto@gmail.com>
Cc: Mark M. Hoffman <mhoffman@lightlink.com>
Cc: Jean Delvare <khali@linux-fr.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

On many Macbooks since mid 2007, the Pro, C2D and Air models, applesmc
fails to read some or all SMC ports.  This problem has various effects,
such as flooded logfiles, malfunctioning temperature sensors,
accelerometers failing to initialize, and difficulties getting backlight
functionality to work properly.

The root of the problem seems to be the command protocol.  The current
code sends out a command byte, then repeatedly polls for an ack before
continuing to send or recieve data.  From experiments leading to this
patch, it seems the command protocol never quite worked or changed so that
one now sends a command byte, waits a little bit, polls for an ack, and if
it fails, repeats the whole thing by sending the command byte again.

This patch implements a send_command function according to the new
interpretation of the protocol, and should work also for earlier models.
Signed-off-by: NHenrik Rydberg <rydberg@euromail.se>
Cc: Nicolas Boichat <nicolas@boichat.ch>
Cc: Riki Oktarianto <rkoktarianto@gmail.com>
Cc: Mark M. Hoffman <mhoffman@lightlink.com>
Cc: Jean Delvare <khali@linux-fr.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

At one single place in the code, the specified number of bytes to read and
the actual number of bytes read differ by one.  This one-liner patch fixes
that inconsistency.
Signed-off-by: NHenrik Rydberg <rydberg@euromail.se>
Cc: Nicolas Boichat <nicolas@boichat.ch>
Cc: Riki Oktarianto <rkoktarianto@gmail.com>
Cc: Mark M. Hoffman <mhoffman@lightlink.com>
Cc: Jean Delvare <khali@linux-fr.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Adds therm-min/max/crit-alarm callbacks, sensor-device-attribute
declarations, and refs to those new decls in the macro used to initialize
the therm_group (of sysfs files)

The thermistors use voltage channels to measure; so they don't have a
fault-alarm, but unlike the other voltages, they do have an overtemp,
which we call crit (by convention).

[akpm@linux-foundation.org: cleanup]
Signed-off-by: NJim Cromie <jim.cromie@gmail.com>
Cc: Jean Delvare <khali@linux-fr.org>
Cc: "Mark M. Hoffman" <mhoffman@lightlink.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

temp and vin status register values may be set by chip specifications, set
again by bios, or by this previously loaded driver.  Debug output nicely
displays modprobe init=\d actions.
Signed-off-by: NJim Cromie <jim.cromie@gmail.com>
Cc: Jean Delvare <khali@linux-fr.org>
Cc: "Mark M. Hoffman" <mhoffman@lightlink.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Driver handles 3 logical devices in fixed length array.  Give this a
define-d constant.
Signed-off-by: NJim Cromie <jim.cromie@gmail.com>
Cc: Jean Delvare <khali@linux-fr.org>
Cc: "Mark M. Hoffman" <mhoffman@lightlink.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Adds temp-min/max/crit/fault-alarm callbacks, sensor-device-attribute
declarations, and refs to those new decls in the macro used to initialize
the temp_group (of sysfs files)

[akpm@linux-foundation.org: cleanups]
Signed-off-by: NJim Cromie <jim.cromie@gmail.com>
Cc: Jean Delvare <khali@linux-fr.org>
Cc: "Mark M. Hoffman" <mhoffman@lightlink.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Adds vin-min/max-alarm callbacks, sensor-device-attribute declarations,
and refs to those new decls in the macro used to initialize the vin_group
(of sysfs files)

[akpm@linux-foundation.org: cleanups]
Signed-off-by: NJim Cromie <jim.cromie@gmail.com>
Cc: Jean Delvare <khali@linux-fr.org>
Cc: "Mark M. Hoffman" <mhoffman@lightlink.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Bring hwmon/pc87360 into agreement with
Documentation/hwmon/sysfs-interface.

Patchset adds separate limit alarms for voltages and temps, it also adds
temp[123]_fault files.  On my Soekris, temps 1,2 are unused/unconnected,
so temp[123]_fault = 1,1,0 respectively.  This agrees with
/usr/bin/sensors, which has always shown them as OPEN.  Temps 4,5,6 are
thermistor based, and dont have a fault bit in their status register.

This patch:

2 different kinds of constants added:
- CHAN_ALM_* constants for (later) vin, temp alarm callbacks.
- CHAN_* conversion constants, used in _init_device, partly for RW1C bits
Signed-off-by: NJim Cromie <jim.cromie@gmail.com>
Cc: Jean Delvare <khali@linux-fr.org>
Cc: "Mark M. Hoffman" <mhoffman@lightlink.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Fix for a typo and and replacing incorrect word in the comment.
Signed-off-by: NAmeya Palande <2ameya@gmail.com>
Cc: "Ashok Raj" <ashok.raj@intel.com>
Cc: "Shaohua Li" <shaohua.li@intel.com>
Cc: "Anil S Keshavamurthy" <anil.s.keshavamurthy@intel.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

These comments are useless, remove them.
Signed-off-by: NWANG Cong <wangcong@zeuux.org>
Cc: Randy Dunlap <rdunlap@xenotime.net>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

On my HP 2510, pressing the (i) button generates an unknown keycode:
0x213b. So here is a patch adding support for it. However, as it seems
there is already support for a similar button connected to 0x231b as
keycode, I wonder if it could be a typo in the driver?
Signed-off-by: NEric Piel <eric.piel@tremplin-utc.net>
Cc: Matthew Garrett <mjg@redhat.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

I fell into the trap recently that it only dumps hrtimers instead of
all timers. Fix the documentation.
Signed-off-by: NAndi Kleen <ak@linux.intel.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Fix

arch/um/sys-i386/signal.c: In function 'copy_sc_from_user':
arch/um/sys-i386/signal.c:182: warning: dereferencing 'void *' pointer
arch/um/sys-i386/signal.c:182: error: request for member '_fxsr_env' in something not a structure or union
Signed-off-by: NWANG Cong <wangcong@zeuux.org>
Cc: Jeff Dike <jdike@addtoit.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Removed duplicated include file <linux/smp_lock.h> in
arch/m68k/bvme6000/rtc.c.
Signed-off-by: NHuang Weiyi <weiyi.huang@gmail.com>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Describe why we need the freezer subsystem and how to use it in a
documentation file.  Since the cgroups.txt file is focused on the
subsystem-agnostic portions of cgroups make a directory and move the old
cgroups.txt file at the same time.
Signed-off-by: NMatt Helsley <matthltc@us.ibm.com>
Cc: Paul Menage <menage@google.com>
Cc: containers@lists.linux-foundation.org
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

check_if_frozen() sounds like it should return something when in fact it's
just updating the freezer state.
Signed-off-by: NMatt Helsley <matthltc@us.ibm.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Rename cgroup freezer states to be less generic to avoid any name
collisions while also better describing what each state is.
Signed-off-by: NMatt Helsley <matthltc@us.ibm.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Don't let frozen tasks or cgroups change.  This means frozen tasks can't
leave their current cgroup for another cgroup.  It also means that tasks
cannot be added to or removed from a cgroup in the FROZEN state.  We
enforce these rules by checking for frozen tasks and cgroups in the
can_attach() function.
Signed-off-by: NMatt Helsley <matthltc@us.ibm.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

When a system is resumed after a suspend, it will also unfreeze frozen
cgroups.

This patchs modifies the resume sequence to skip the tasks which are part
of a frozen control group.
Signed-off-by: NCedric Le Goater <clg@fr.ibm.com>
Signed-off-by: NMatt Helsley <matthltc@us.ibm.com>
Acked-by: NSerge E. Hallyn <serue@us.ibm.com>
Tested-by: NMatt Helsley <matthltc@us.ibm.com>
Acked-by: NRafael J. Wysocki <rjw@sisk.pl>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

This patch implements a new freezer subsystem in the control groups
framework.  It provides a way to stop and resume execution of all tasks in
a cgroup by writing in the cgroup filesystem.

The freezer subsystem in the container filesystem defines a file named
freezer.state.  Writing "FROZEN" to the state file will freeze all tasks
in the cgroup.  Subsequently writing "RUNNING" will unfreeze the tasks in
the cgroup.  Reading will return the current state.

* Examples of usage :

   # mkdir /containers/freezer
   # mount -t cgroup -ofreezer freezer  /containers
   # mkdir /containers/0
   # echo $some_pid > /containers/0/tasks

to get status of the freezer subsystem :

   # cat /containers/0/freezer.state
   RUNNING

to freeze all tasks in the container :

   # echo FROZEN > /containers/0/freezer.state
   # cat /containers/0/freezer.state
   FREEZING
   # cat /containers/0/freezer.state
   FROZEN

to unfreeze all tasks in the container :

   # echo RUNNING > /containers/0/freezer.state
   # cat /containers/0/freezer.state
   RUNNING

This is the basic mechanism which should do the right thing for user space
task in a simple scenario.

It's important to note that freezing can be incomplete.  In that case we
return EBUSY.  This means that some tasks in the cgroup are busy doing
something that prevents us from completely freezing the cgroup at this
time.  After EBUSY, the cgroup will remain partially frozen -- reflected
by freezer.state reporting "FREEZING" when read.  The state will remain
"FREEZING" until one of these things happens:

	1) Userspace cancels the freezing operation by writing "RUNNING" to
		the freezer.state file
	2) Userspace retries the freezing operation by writing "FROZEN" to
		the freezer.state file (writing "FREEZING" is not legal
		and returns EIO)
	3) The tasks that blocked the cgroup from entering the "FROZEN"
		state disappear from the cgroup's set of tasks.

[akpm@linux-foundation.org: coding-style fixes]
[akpm@linux-foundation.org: export thaw_process]
Signed-off-by: NCedric Le Goater <clg@fr.ibm.com>
Signed-off-by: NMatt Helsley <matthltc@us.ibm.com>
Acked-by: NSerge E. Hallyn <serue@us.ibm.com>
Tested-by: NMatt Helsley <matthltc@us.ibm.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Now that the TIF_FREEZE flag is available in all architectures, extract
the refrigerator() and freeze_task() from kernel/power/process.c and make
it available to all.

The refrigerator() can now be used in a control group subsystem
implementing a control group freezer.
Signed-off-by: NCedric Le Goater <clg@fr.ibm.com>
Signed-off-by: NMatt Helsley <matthltc@us.ibm.com>
Acked-by: NSerge E. Hallyn <serue@us.ibm.com>
Tested-by: NMatt Helsley <matthltc@us.ibm.com>
Cc: "Rafael J. Wysocki" <rjw@sisk.pl>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

This patch series introduces a cgroup subsystem that utilizes the swsusp
freezer to freeze a group of tasks.  It's immediately useful for batch job
management scripts.  It should also be useful in the future for
implementing container checkpoint/restart.

The freezer subsystem in the container filesystem defines a cgroup file
named freezer.state.  Reading freezer.state will return the current state
of the cgroup.  Writing "FROZEN" to the state file will freeze all tasks
in the cgroup.  Subsequently writing "RUNNING" will unfreeze the tasks in
the cgroup.

* Examples of usage :

   # mkdir /containers/freezer
   # mount -t cgroup -ofreezer freezer  /containers
   # mkdir /containers/0
   # echo $some_pid > /containers/0/tasks

to get status of the freezer subsystem :

   # cat /containers/0/freezer.state
   RUNNING

to freeze all tasks in the container :

   # echo FROZEN > /containers/0/freezer.state
   # cat /containers/0/freezer.state
   FREEZING
   # cat /containers/0/freezer.state
   FROZEN

to unfreeze all tasks in the container :

   # echo RUNNING > /containers/0/freezer.state
   # cat /containers/0/freezer.state
   RUNNING

This patch:

The first step in making the refrigerator() available to all
architectures, even for those without power management.

The purpose of such a change is to be able to use the refrigerator() in a
new control group subsystem which will implement a control group freezer.

[akpm@linux-foundation.org: fix sparc]
Signed-off-by: NCedric Le Goater <clg@fr.ibm.com>
Signed-off-by: NMatt Helsley <matthltc@us.ibm.com>
Acked-by: NPavel Machek <pavel@suse.cz>
Acked-by: NSerge E. Hallyn <serue@us.ibm.com>
Acked-by: NRafael J. Wysocki <rjw@sisk.pl>
Acked-by: NNigel Cunningham <nigel@tuxonice.net>
Tested-by: NMatt Helsley <matthltc@us.ibm.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

To prepare the chunking, move the sys_move_pages() code that is used when
nodes!=NULL into do_pages_move().  And rename do_move_pages() into
do_move_page_to_node_array().
Signed-off-by: NBrice Goglin <Brice.Goglin@inria.fr>
Acked-by: NChristoph Lameter <cl@linux-foundation.org>
Cc: Nick Piggin <nickpiggin@yahoo.com.au>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

do_pages_stat() does not need any page_to_node entry for real.  Just pass
the pointers to the user-space page address array and to the user-space
status array, and have do_pages_stat() traverse the former and fill the
latter directly.
Signed-off-by: NBrice Goglin <Brice.Goglin@inria.fr>
Acked-by: NChristoph Lameter <cl@linux-foundation.org>
Cc: Nick Piggin <nickpiggin@yahoo.com.au>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

A patchset reworking sys_move_pages().  It removes the possibly large
vmalloc by using multiple chunks when migrating large buffers.  It also
dramatically increases the throughput for large buffers since the lookup
in new_page_node() is now limited to a single chunk, causing the quadratic
complexity to have a much slower impact.  There is no need to use any
radix-tree-like structure to improve this lookup.

sys_move_pages() duration on a 4-quadcore-opteron 2347HE (1.9Gz),
migrating between nodes #2 and #3:

	length		move_pages (us)		move_pages+patch (us)
	4kB		126			98
	40kB		198			168
	400kB		963			937
	4MB		12503			11930
	40MB		246867			11848

Patches #1 and #4 are the important ones:
1) stop returning -ENOENT from sys_move_pages() if nothing got migrated
2) don't vmalloc a huge page_to_node array for do_pages_stat()
3) extract do_pages_move() out of sys_move_pages()
4) rework do_pages_move() to work on page_sized chunks
5) move_pages: no need to set pp->page to ZERO_PAGE(0) by default

This patch:

There is no point in returning -ENOENT from sys_move_pages() if all pages
were already on the right node, while we return 0 if only 1 page was not.
Most application don't know where their pages are allocated, so it's not
an error to try to migrate them anyway.

Just return 0 and let the status array in user-space be checked if the
application needs details.

It will make the upcoming chunked-move_pages() support much easier.
Signed-off-by: NBrice Goglin <Brice.Goglin@inria.fr>
Acked-by: NChristoph Lameter <cl@linux-foundation.org>
Cc: Nick Piggin <nickpiggin@yahoo.com.au>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

During hotplug memory remove, memory regions should be released on a
PAGES_PER_SECTION size chunks.  This mirrors the code in add_memory where
resources are requested on a PAGES_PER_SECTION size.

Attempting to release the entire memory region fails because there is not
a single resource for the total number of pages being removed.  Instead
the resources for the pages are split in PAGES_PER_SECTION size chunks as
requested during memory add.
Signed-off-by: NNathan Fontenot <nfont@austin.ibm.com>
Signed-off-by: NBadari Pulavarty <pbadari@us.ibm.com>
Acked-by: NYasunori Goto <y-goto@jp.fujitsu.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The current documentation of dirty_ratio and dirty_background_ratio is a
bit misleading.

In the documentation we say that they are "a percentage of total system
memory", but the current page writeback policy, intead, is to apply the
percentages to the dirtyable memory, that means free pages + reclaimable
pages.

Better to be more explicit to clarify this concept.
Signed-off-by: NAndrea Righi <righi.andrea@gmail.com>
Signed-off-by: NKAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

This attribute just has a write operation.

[akpm@linux-foundation.org: use S_IWUSR as suggested by Randy]
Signed-off-by: NShaohua Li <shaohua.li@intel.com>
Cc: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

This replaces zone->lru_lock in setup_per_zone_pages_min() with zone->lock.
There seems to be no need for the lru_lock anymore, but there is a need for
zone->lock instead, because that function may call move_freepages() via
setup_zone_migrate_reserve().
Signed-off-by: NGerald Schaefer <gerald.schaefer@de.ibm.com>
Acked-by: NKAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Tested-by: NYasunori Goto <y-goto@jp.fujitsu.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Presently hugepage doesn't use zero page at all because zero page is only
used for coredumping and hugepage can't core dump.

However we have now implemented hugepage coredumping.  Therefore we should
implement the zero page of hugepage.

Implementation note:

o Why do we only check VM_SHARED for zero page?
  normal page checked as ..

	static inline int use_zero_page(struct vm_area_struct *vma)
	{
	        if (vma->vm_flags & (VM_LOCKED | VM_SHARED))
	                return 0;

	        return !vma->vm_ops || !vma->vm_ops->fault;
	}

First, hugepages are never mlock()ed.  We aren't concerned with VM_LOCKED.

Second, hugetlbfs is a pseudo filesystem, not a real filesystem and it
doesn't have any file backing.  Thus ops->fault checking is meaningless.

o Why don't we use zero page if !pte.

!pte indicate {pud, pmd} doesn't exist or some error happened.  So we
shouldn't return zero page if any error occurred.
Signed-off-by: NKOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: Adam Litke <agl@us.ibm.com>
Cc: Hugh Dickins <hugh@veritas.com>
Cc: Kawai Hidehiro <hidehiro.kawai.ez@hitachi.com>
Cc: Mel Gorman <mel@skynet.ie>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Presently hugepage's vma has a VM_RESERVED flag in order not to be
swapped.  But a VM_RESERVED vma isn't core dumped because this flag is
often used for some kernel vmas (e.g.  vmalloc, sound related).

Thus hugepages are never dumped and it can't be debugged easily.  Many
developers want hugepages to be included into core-dump.

However, We can't read generic VM_RESERVED area because this area is often
IO mapping area.  then these area reading may change device state.  it is
definitly undesiable side-effect.

So adding a hugepage specific bit to the coredump filter is better.  It
will be able to hugepage core dumping and doesn't cause any side-effect to
any i/o devices.

In additional, libhugetlb use hugetlb private mapping pages as anonymous
page.  Then, hugepage private mapping pages should be core dumped by
default.

Then, /proc/[pid]/core_dump_filter has two new bits.

 - bit 5 mean hugetlb private mapping pages are dumped or not. (default: yes)
 - bit 6 mean hugetlb shared mapping pages are dumped or not.  (default: no)

I tested by following method.

% ulimit -c unlimited
% ./crash_hugepage  50
% ./crash_hugepage  50  -p
% ls -lh
% gdb ./crash_hugepage core
%
% echo 0x43 > /proc/self/coredump_filter
% ./crash_hugepage  50
% ./crash_hugepage  50  -p
% ls -lh
% gdb ./crash_hugepage core

#include <stdlib.h>
#include <stdio.h>
#include <unistd.h>
#include <sys/mman.h>
#include <string.h>

#include "hugetlbfs.h"

int main(int argc, char** argv){
	char* p;
	int ch;
	int mmap_flags = MAP_SHARED;
	int fd;
	int nr_pages;

	while((ch = getopt(argc, argv, "p")) != -1) {
		switch (ch) {
		case 'p':
			mmap_flags &= ~MAP_SHARED;
			mmap_flags |= MAP_PRIVATE;
			break;
		default:
			/* nothing*/
			break;
		}
	}
	argc -= optind;
	argv += optind;

	if (argc == 0){
		printf("need # of pages\n");
		exit(1);
	}

	nr_pages = atoi(argv[0]);
	if (nr_pages < 2) {
		printf("nr_pages must >2\n");
		exit(1);
	}

	fd = hugetlbfs_unlinked_fd();
	p = mmap(NULL, nr_pages * gethugepagesize(),
		 PROT_READ|PROT_WRITE, mmap_flags, fd, 0);

	sleep(2);

	*(p + gethugepagesize()) = 1; /* COW */
	sleep(2);

	/* crash! */
	*(int*)0 = 1;

	return 0;
}
Signed-off-by: NKOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Reviewed-by: NKawai Hidehiro <hidehiro.kawai.ez@hitachi.com>
Cc: Hugh Dickins <hugh@veritas.com>
Cc: William Irwin <wli@holomorphy.com>
Cc: Adam Litke <agl@us.ibm.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Improve debuggability of memory setup problems.
Signed-off-by: NYinghai Lu <yhlu.kernel@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

mm/hugetlb.c:265:17: warning: symbol 'resv_map_alloc' was not declared. Should it be static?
mm/hugetlb.c:277:6: warning: symbol 'resv_map_release' was not declared. Should it be static?
mm/hugetlb.c:292:9: warning: Using plain integer as NULL pointer
mm/hugetlb.c:1750:5: warning: symbol 'unmap_ref_private' was not declared. Should it be static?
Signed-off-by: NHarvey Harrison <harvey.harrison@gmail.com>
Acked-by: NAndy Whitcroft <apw@shadowen.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Rewrite the vmap allocator to use rbtrees and lazy tlb flushing, and
provide a fast, scalable percpu frontend for small vmaps (requires a
slightly different API, though).

The biggest problem with vmap is actually vunmap.  Presently this requires
a global kernel TLB flush, which on most architectures is a broadcast IPI
to all CPUs to flush the cache.  This is all done under a global lock.  As
the number of CPUs increases, so will the number of vunmaps a scaled
workload will want to perform, and so will the cost of a global TLB flush.
 This gives terrible quadratic scalability characteristics.

Another problem is that the entire vmap subsystem works under a single
lock.  It is a rwlock, but it is actually taken for write in all the fast
paths, and the read locking would likely never be run concurrently anyway,
so it's just pointless.

This is a rewrite of vmap subsystem to solve those problems.  The existing
vmalloc API is implemented on top of the rewritten subsystem.

The TLB flushing problem is solved by using lazy TLB unmapping.  vmap
addresses do not have to be flushed immediately when they are vunmapped,
because the kernel will not reuse them again (would be a use-after-free)
until they are reallocated.  So the addresses aren't allocated again until
a subsequent TLB flush.  A single TLB flush then can flush multiple
vunmaps from each CPU.

XEN and PAT and such do not like deferred TLB flushing because they can't
always handle multiple aliasing virtual addresses to a physical address.
They now call vm_unmap_aliases() in order to flush any deferred mappings.
That call is very expensive (well, actually not a lot more expensive than
a single vunmap under the old scheme), however it should be OK if not
called too often.

The virtual memory extent information is stored in an rbtree rather than a
linked list to improve the algorithmic scalability.

There is a per-CPU allocator for small vmaps, which amortizes or avoids
global locking.

To use the per-CPU interface, the vm_map_ram / vm_unmap_ram interfaces
must be used in place of vmap and vunmap.  Vmalloc does not use these
interfaces at the moment, so it will not be quite so scalable (although it
will use lazy TLB flushing).

As a quick test of performance, I ran a test that loops in the kernel,
linearly mapping then touching then unmapping 4 pages.  Different numbers
of tests were run in parallel on an 4 core, 2 socket opteron.  Results are
in nanoseconds per map+touch+unmap.

threads           vanilla         vmap rewrite
1                 14700           2900
2                 33600           3000
4                 49500           2800
8                 70631           2900

So with a 8 cores, the rewritten version is already 25x faster.

In a slightly more realistic test (although with an older and less
scalable version of the patch), I ripped the not-very-good vunmap batching
code out of XFS, and implemented the large buffer mapping with vm_map_ram
and vm_unmap_ram...  along with a couple of other tricks, I was able to
speed up a large directory workload by 20x on a 64 CPU system.  I believe
vmap/vunmap is actually sped up a lot more than 20x on such a system, but
I'm running into other locks now.  vmap is pretty well blown off the
profiles.

Before:
1352059 total                                      0.1401
798784 _write_lock                              8320.6667 <- vmlist_lock
529313 default_idle                             1181.5022
 15242 smp_call_function                         15.8771  <- vmap tlb flushing
  2472 __get_vm_area_node                         1.9312  <- vmap
  1762 remove_vm_area                             4.5885  <- vunmap
   316 map_vm_area                                0.2297  <- vmap
   312 kfree                                      0.1950
   300 _spin_lock                                 3.1250
   252 sn_send_IPI_phys                           0.4375  <- tlb flushing
   238 vmap                                       0.8264  <- vmap
   216 find_lock_page                             0.5192
   196 find_next_bit                              0.3603
   136 sn2_send_IPI                               0.2024
   130 pio_phys_write_mmr                         2.0312
   118 unmap_kernel_range                         0.1229

After:
 78406 total                                      0.0081
 40053 default_idle                              89.4040
 33576 ia64_spinlock_contention                 349.7500
  1650 _spin_lock                                17.1875
   319 __reg_op                                   0.5538
   281 _atomic_dec_and_lock                       1.0977
   153 mutex_unlock                               1.5938
   123 iget_locked                                0.1671
   117 xfs_dir_lookup                             0.1662
   117 dput                                       0.1406
   114 xfs_iget_core                              0.0268
    92 xfs_da_hashname                            0.1917
    75 d_alloc                                    0.0670
    68 vmap_page_range                            0.0462 <- vmap
    58 kmem_cache_alloc                           0.0604
    57 memset                                     0.0540
    52 rb_next                                    0.1625
    50 __copy_user                                0.0208
    49 bitmap_find_free_region                    0.2188 <- vmap
    46 ia64_sn_udelay                             0.1106
    45 find_inode_fast                            0.1406
    42 memcmp                                     0.2188
    42 finish_task_switch                         0.1094
    42 __d_lookup                                 0.0410
    40 radix_tree_lookup_slot                     0.1250
    37 _spin_unlock_irqrestore                    0.3854
    36 xfs_bmapi                                  0.0050
    36 kmem_cache_free                            0.0256
    35 xfs_vn_getattr                             0.0322
    34 radix_tree_lookup                          0.1062
    33 __link_path_walk                           0.0035
    31 xfs_da_do_buf                              0.0091
    30 _xfs_buf_find                              0.0204
    28 find_get_page                              0.0875
    27 xfs_iread                                  0.0241
    27 __strncpy_from_user                        0.2812
    26 _xfs_buf_initialize                        0.0406
    24 _xfs_buf_lookup_pages                      0.0179
    24 vunmap_page_range                          0.0250 <- vunmap
    23 find_lock_page                             0.0799
    22 vm_map_ram                                 0.0087 <- vmap
    20 kfree                                      0.0125
    19 put_page                                   0.0330
    18 __kmalloc                                  0.0176
    17 xfs_da_node_lookup_int                     0.0086
    17 _read_lock                                 0.0885
    17 page_waitqueue                             0.0664

vmap has gone from being the top 5 on the profiles and flushing the crap
out of all TLBs, to using less than 1% of kernel time.

[akpm@linux-foundation.org: cleanups, section fix]
[akpm@linux-foundation.org: fix build on alpha]
Signed-off-by: NNick Piggin <npiggin@suse.de>
Cc: Jeremy Fitzhardinge <jeremy@goop.org>
Cc: Krzysztof Helt <krzysztof.h1@poczta.fm>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

__vma_link_file and expand_downwards functions are not small, yeat they
are marked inline.  They probably had one callsite sometime in the past,
but now they have more.  In order to prevent similar thing, I also
deinlined expand_upwards, despite it having only pne callsite.  Nowadays
gcc auto-inlines such static functions anyway.  In find_extend_vma, I
removed one extra level of indirection.

Patch is deliberately generated with -U $BIGNUM to make
it easier to see that functions are big.

Result:

# size */*/mmap.o */vmlinux
   text    data     bss     dec     hex filename
   9514     188      16    9718    25f6 0.org/mm/mmap.o
   9237     188      16    9441    24e1 deinline/mm/mmap.o
6124402  858996  389480 7372878  70804e 0.org/vmlinux
6124113  858996  389480 7372589  707f2d deinline/vmlinux
Signed-off-by: NDenys Vlasenko <vda.linux@googlemail.com>
Cc: Hugh Dickins <hugh@veritas.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

trylock_buffer and unlock_buffer open and close a critical section.
Hence, we can use the lock bitops to get the desired memory ordering.
Signed-off-by: NNick Piggin <npiggin@suse.de>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

trylock_page, unlock_page open and close a critical section. Hence,
we can use the lock bitops to get the desired memory ordering.

Also, mark trylock as likely to succeed (and remove the annotation from
callers).
Signed-off-by: NNick Piggin <npiggin@suse.de>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

unlock_page is fairly expensive.  It can be avoided in page reclaim
success path.  By definition if we have any other references to the page
it would be a bug anyway.
Signed-off-by: NNick Piggin <npiggin@suse.de>
Reviewed-by: NKOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>