- 11 7月, 2013 2 次提交
-
-
由 Eliezer Tamir 提交于
Rename ndo_ll_poll to ndo_busy_poll. Rename sk_mark_ll to sk_mark_napi_id. Rename skb_mark_ll to skb_mark_napi_id. Correct all useres of these functions. Update comments and defines in include/net/busy_poll.h Signed-off-by: NEliezer Tamir <eliezer.tamir@linux.intel.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Eliezer Tamir 提交于
Rename the file and correct all the places where it is included. Signed-off-by: NEliezer Tamir <eliezer.tamir@linux.intel.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 26 6月, 2013 5 次提交
-
-
由 Yevgeny Petrilin 提交于
Print a warning when a TX timeout is detected Signed-off-by: NYevgeny Petrilin <yevgenyp@mellanox.com> Signed-off-by: NEugenia Emantayev <eugenia@mellanox.com> Signed-off-by: NAmir Vadai <amirv@mellanox.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Eugenia Emantayev 提交于
The RX rings were cleaned while there was still possible RX traffic completion handling. Change the sequance of events so that the port is closed and the QPs are being stopped before RX cleanup. Signed-off-by: NEugenia Emantayev <eugenia@mellanox.com> Signed-off-by: NAmir Vadai <amirv@mellanox.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Eugenia Emantayev 提交于
The port vlan table size is 126 (used for IBoE) so after 126 we will not have space and the user need to see it only in debug print and not error. Signed-off-by: NAviad Yehezkel <aviadye@mellanox.com> Reviewed-by: NYevgeny Petrilin <yevgenyp@mellanox.com> Signed-off-by: NEugenia Emantayev <eugenia@mellanox.com> Signed-off-by: NAmir Vadai <amirv@mellanox.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Eugenia Emantayev 提交于
To avoid a race between the open function and everything that happens after register_netdev() move it to be the last operation called. Signed-off-by: NEugenia Emantayev <eugenia@mellanox.com> Signed-off-by: NAmir Vadai <amirv@mellanox.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Jack Morgenstein 提交于
There are no counters allocated to the eth device when the port is down, so this query is meaningless at that time. It also leads to querying incorrect counters (since the counter_index is not valid when the device port is down). Signed-off-by: NJack Morgenstein <jackm@dev.mellanox.com> Signed-off-by: NAmir Vadai <amirv@mellanox.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 20 6月, 2013 2 次提交
-
-
由 Amir Vadai 提交于
Signed-off-by: NAmir Vadai <amirv@mellanox.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Amir Vadai 提交于
Add basic support for LLS. Signed-off-by: NAmir Vadai <amirv@mellanox.com> Reviewed-by: NEric Dumazet <edumazet@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 14 6月, 2013 1 次提交
-
-
由 Rony Efraim 提交于
Add support to change the link state of VF (vPort) Signed-off-by: NRony Efraim <ronye@mellanox.com> Signed-off-by: NOr Gerlitz <ogerlitz@mellanox.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 05 6月, 2013 2 次提交
-
-
由 Or Gerlitz 提交于
When a VF sense they didn't get MAC address, use random one. This will address the case of administrator not assigning MAC to the VF through the PF OS APIs and keep udev happy. Signed-off-by: NOr Gerlitz <ogerlitz@mellanox.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Sagi Grimberg 提交于
When turning on adaptive_rx under adaptive moderation, the CQ's moderation count wasn't updated according to rx_frames which resulted in too many interrupts and bandwidth drop. Signed-off-by: NSagi Grimberg <sagig@mellanox.com> Signed-off-by: NAmir Vadai <amirv@mellanox.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 27 4月, 2013 5 次提交
-
-
由 Rony Efraim 提交于
Support getting VF config. Signed-off-by: NRony Efraim <ronye@mellanox.com> Signed-off-by: NOr Gerlitz <ogerlitz@mellanox.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Rony Efraim 提交于
Add ndo_set_vf_spoofchk support Signed-off-by: NRony Efraim <ronye@mellanox.com> Signed-off-by: NOr Gerlitz <ogerlitz@mellanox.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Rony Efraim 提交于
Add support to ndo_set_vf_vlan in the driver. Once this call is used the vport is considered to be in VST mode. In this mode, the PPF driver configures Ethernet QPs created by this VF to use this vlan id and priority. Currently RoCE isn't supported on that mode. The special values of VID=4095 or VID=0,UP=0 are considered as VGT. Signed-off-by: NRony Efraim <ronye@mellanox.com> Signed-off-by: NOr Gerlitz <ogerlitz@mellanox.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Rony Efraim 提交于
Add ndo_set_vf_mac support which allows to set the MAC address for mlx4 VF Ethernet NICs from the host. Signed-off-by: NRony Efraim <ronye@mellanox.com> Signed-off-by: NOr Gerlitz <ogerlitz@mellanox.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Amir Vadai 提交于
Should not run HW clock overflow check if HW clock is not supported. Also, since this watchdog is the only customer of service_task, no need to start it in that case. Signed-off-by: NAmir Vadai <amirv@mellanox.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 25 4月, 2013 3 次提交
-
-
由 Hadar Hen Zion 提交于
Align the names used by enum mlx4_net_trans_promisc_mode with the actual firmware specification. The patch doesn't introduce any functional change or API change towards the firmware. Remove MLX4_FS_PROMISC_FUNCTION_PORT which isn't of use. Add new enums MLX4_FS_{UC/MC}_SNIFFER as a preparation step for sniffer support. Signed-off-by: NHadar Hen Zion <hadarh@mellanox.com> Signed-off-by: NOr Gerlitz <ogerlitz@mellanox.com> Signed-off-by: NRoland Dreier <roland@purestorage.com>
-
由 Amir Vadai 提交于
Add a service task to run tasks that needed to be executed periodically. Currently the only task is a watchdog to catch NIC clock overflow, to make timestamping accurate. Will move the statistics task into this framework in a later patch. Signed-off-by: NAmir Vadai <amirv@mellanox.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Amir Vadai 提交于
The patch allows to enable/disable HW timestamping for incoming and/or outgoing packets. It adds and initializes all structs and callbacks needed by kernel TS API. To enable/disable HW timestamping appropriate ioctl should be used. Currently HWTSTAMP_FILTER_ALL/NONE and HWTSAMP_TX_ON/OFF only are supported. When enabling TS on receive flow - VLAN stripping will be disabled. Also were made all relevant changes in RX/TX flows to consider TS request and plant HW timestamps into relevant structures. mlx4_ib was fixed to compile with new mlx4_cq_alloc() signature. Signed-off-by: NEugenia Emantayev <eugenia@mellanox.com> Signed-off-by: NAmir Vadai <amirv@mellanox.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 20 4月, 2013 2 次提交
-
-
由 Patrick McHardy 提交于
Change the rx_{add,kill}_vid callbacks to take a protocol argument in preparation of 802.1ad support. The protocol argument used so far is always htons(ETH_P_8021Q). Signed-off-by: NPatrick McHardy <kaber@trash.net> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Patrick McHardy 提交于
Rename the hardware VLAN acceleration features to include "CTAG" to indicate that they only support CTAGs. Follow up patches will introduce 802.1ad server provider tagging (STAGs) and require the distinction for hardware not supporting acclerating both. Signed-off-by: NPatrick McHardy <kaber@trash.net> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 08 4月, 2013 1 次提交
-
-
由 Or Gerlitz 提交于
Enable the DCB ETS ops only when supported by the firmware. For older firmware/cards which don't support ETS, advertize only PFC DCB ops. Signed-off-by: NEugenia Emantayev <eugenia@mellanox.co.il> Signed-off-by: NOr Gerlitz <ogerlitz@mellanox.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 03 4月, 2013 1 次提交
-
-
由 Yan Burman 提交于
Commit 6bbb6d99 "net/mlx4_en: Optimize Rx fast path filter checks" introduced a regression under which the MAC address read from the card was not converted correctly (the most significant byte was not handled), fix that. Reviewed-by: NOr Gerlitz <ogerlitz@mellanox.com> Signed-off-by: NYan Burman <yanb@mellanox.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 22 3月, 2013 1 次提交
-
-
由 Hadar Hen Zion 提交于
Fix the ethtool flow steering rules cleanup to be carried out before releasing the RX QPs. Signed-off-by: NHadar Hen Zion <hadarh@mellanox.com> Signed-off-by: NOr Gerlitz <ogerlitz@mellanox.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 08 3月, 2013 4 次提交
-
-
由 Amir Vadai 提交于
Commit 37706996 "mlx4_en: fix allocation of CPU affinity reverse-map" fixed a bug when mlx4_dev->caps.comp_pool is larger from the device rx rings, but introduced a regression. When the mlx4_core is activating its "legacy mode" (e.g when running in SRIOV mode) w.r.t to EQs/IRQs usage, comp_pool becomes zero and we're crashing on divide by zero alloc_cpu_rmap. Fix that by enabling RFS only when running in non-legacy mode. Reported-by: NYan Burman <yanb@mellanox.com> Cc: Kleber Sacilotto de Souza <klebers@linux.vnet.ibm.com> Signed-off-by: NAmir Vadai <amirv@mellanox.com> Signed-off-by: NOr Gerlitz <ogerlitz@mellanox.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Yan Burman 提交于
Make sure we cleanup all MAC related resources (entries in the port MAC table and steering rules) when stopping a port or when the driver is unloaded. The leak was introduced by commit 07cb4b0a "net/mlx4_en: Manage hash of MAC addresses per port". Signed-off-by: NYan Burman <yanb@mellanox.com> Signed-off-by: NOr Gerlitz <ogerlitz@mellanox.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Yan Burman 提交于
Remove unnecessary use of workqueue for the device MAC address setting flow, and fix a race when setting MAC address which was introduced by commit c07cb4b0 "net/mlx4_en: Manage hash of MAC addresses per port" The race happened when mlx4_en_replace_mac was being executed in parallel with a successive call to ndo_set_mac_address, e.g witn an A/B/A MAC setting configuration test, the third set fails. With this change we also properly report an error if set MAC fails. Signed-off-by: NYan Burman <yanb@mellanox.com> Signed-off-by: NOr Gerlitz <ogerlitz@mellanox.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Vlad Yasevich 提交于
Remove driver specific fdb hadlers since they are the same as the default ones. CC: Amir Vadai <amirv@mellanox.com> CC: Yan Burman <yanb@mellanox.com> Signed-off-by: NVlad Yasevich <vyasevic@redhat.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 28 2月, 2013 1 次提交
-
-
由 Sasha Levin 提交于
I'm not sure why, but the hlist for each entry iterators were conceived list_for_each_entry(pos, head, member) The hlist ones were greedy and wanted an extra parameter: hlist_for_each_entry(tpos, pos, head, member) Why did they need an extra pos parameter? I'm not quite sure. Not only they don't really need it, it also prevents the iterator from looking exactly like the list iterator, which is unfortunate. Besides the semantic patch, there was some manual work required: - Fix up the actual hlist iterators in linux/list.h - Fix up the declaration of other iterators based on the hlist ones. - A very small amount of places were using the 'node' parameter, this was modified to use 'obj->member' instead. - Coccinelle didn't handle the hlist_for_each_entry_safe iterator properly, so those had to be fixed up manually. The semantic patch which is mostly the work of Peter Senna Tschudin is here: @@ iterator name hlist_for_each_entry, hlist_for_each_entry_continue, hlist_for_each_entry_from, hlist_for_each_entry_rcu, hlist_for_each_entry_rcu_bh, hlist_for_each_entry_continue_rcu_bh, for_each_busy_worker, ax25_uid_for_each, ax25_for_each, inet_bind_bucket_for_each, sctp_for_each_hentry, sk_for_each, sk_for_each_rcu, sk_for_each_from, sk_for_each_safe, sk_for_each_bound, hlist_for_each_entry_safe, hlist_for_each_entry_continue_rcu, nr_neigh_for_each, nr_neigh_for_each_safe, nr_node_for_each, nr_node_for_each_safe, for_each_gfn_indirect_valid_sp, for_each_gfn_sp, for_each_host; type T; expression a,c,d,e; identifier b; statement S; @@ -T b; <+... when != b ( hlist_for_each_entry(a, - b, c, d) S | hlist_for_each_entry_continue(a, - b, c) S | hlist_for_each_entry_from(a, - b, c) S | hlist_for_each_entry_rcu(a, - b, c, d) S | hlist_for_each_entry_rcu_bh(a, - b, c, d) S | hlist_for_each_entry_continue_rcu_bh(a, - b, c) S | for_each_busy_worker(a, c, - b, d) S | ax25_uid_for_each(a, - b, c) S | ax25_for_each(a, - b, c) S | inet_bind_bucket_for_each(a, - b, c) S | sctp_for_each_hentry(a, - b, c) S | sk_for_each(a, - b, c) S | sk_for_each_rcu(a, - b, c) S | sk_for_each_from -(a, b) +(a) S + sk_for_each_from(a) S | sk_for_each_safe(a, - b, c, d) S | sk_for_each_bound(a, - b, c) S | hlist_for_each_entry_safe(a, - b, c, d, e) S | hlist_for_each_entry_continue_rcu(a, - b, c) S | nr_neigh_for_each(a, - b, c) S | nr_neigh_for_each_safe(a, - b, c, d) S | nr_node_for_each(a, - b, c) S | nr_node_for_each_safe(a, - b, c, d) S | - for_each_gfn_sp(a, c, d, b) S + for_each_gfn_sp(a, c, d) S | - for_each_gfn_indirect_valid_sp(a, c, d, b) S + for_each_gfn_indirect_valid_sp(a, c, d) S | for_each_host(a, - b, c) S | for_each_host_safe(a, - b, c, d) S | for_each_mesh_entry(a, - b, c, d) S ) ...+> [akpm@linux-foundation.org: drop bogus change from net/ipv4/raw.c] [akpm@linux-foundation.org: drop bogus hunk from net/ipv6/raw.c] [akpm@linux-foundation.org: checkpatch fixes] [akpm@linux-foundation.org: fix warnings] [akpm@linux-foudnation.org: redo intrusive kvm changes] Tested-by: NPeter Senna Tschudin <peter.senna@gmail.com> Acked-by: NPaul E. McKenney <paulmck@linux.vnet.ibm.com> Signed-off-by: NSasha Levin <sasha.levin@oracle.com> Cc: Wu Fengguang <fengguang.wu@intel.com> Cc: Marcelo Tosatti <mtosatti@redhat.com> Cc: Gleb Natapov <gleb@redhat.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 24 2月, 2013 2 次提交
-
-
The mlx4_en driver allocates the number of objects for the CPU affinity reverse-map based on the number of rx rings of the device. However, mlx4_assign_eq() calls irq_cpu_rmap_add() as many times as IRQ's are assigned to EQ's, which can be as large as mlx4_dev->caps.comp_pool. If caps.comp_pool is larger than rx_ring_num we will eventually hit the BUG_ON() in cpu_rmap_add(). Fix this problem by allocating space for the maximum number of CPU affinity reverse-map objects we might want to add. Signed-off-by: NKleber Sacilotto de Souza <klebers@linux.vnet.ibm.com> Acked-by: NAmir Vadai <amirv@mellanox.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
The memory to hold the network device tx_cq is not being allocated with the correct size in mlx4_en_init_netdev(). It should use MAX_TX_RINGS instead of MAX_RX_RINGS. This can cause problems if the number of tx rings being used is greater than MAX_RX_RINGS. Signed-off-by: NKleber Sacilotto de Souza <klebers@linux.vnet.ibm.com> Acked-by: NAmir Vadai <amirv@mellanox.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 14 2月, 2013 1 次提交
-
-
由 Vlad Yasevich 提交于
When a user adds bridge neighbors, allow him to specify VLAN id. If the VLAN id is not specified, the neighbor will be added for VLANs currently in the ports filter list. If no VLANs are configured on the port, we use vlan 0 and only add 1 entry. Signed-off-by: NVlad Yasevich <vyasevic@redhat.com> Acked-by: NJitendra Kalsaria <jitendra.kalsaria@qlogic.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 09 2月, 2013 1 次提交
-
-
由 Joe Perches 提交于
alloc failures already get standardized OOM messages and a dump_stack. For the affected mallocs around these OOM messages: Converted kmallocs with multiplies to kmalloc_array. Converted a kmalloc/memcpy to kmemdup. Removed now unused stack variables. Removed unnecessary parentheses. Neatened alignment. Signed-off-by: NJoe Perches <joe@perches.com> Acked-by: NArend van Spriel <arend@broadcom.com> Acked-by: NMarc Kleine-Budde <mkl@pengutronix.de> Acked-by: NJohn W. Linville <linville@tuxdriver.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 08 2月, 2013 6 次提交
-
-
由 Tom Herbert 提交于
Fix issue in Mellanox driver related to BQL. netdev_tx_reset_queue was not being called in certain situations where the device was being start and stopped. Moved netdev_tx_reset_queue from the reset device path to mlx4_en_free_tx_buf which is where the rings are cleaned in a reset (specifically from device being stopped). Signed-off-by: NTom Herbert <therbert@google.com> Acked-By: NAmir Vadai <amirv@mellanox.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Yan Burman 提交于
Add support for setting embedded switch fdb in case of SRIOV, by implementing ndo_fdb_{add, del, dump}. This will allow to use bridged configuration with multi-function. In order to add VM MAC to the eSwitch fdb, the following command may be used over the relevant function interface: bridge fdb add <MAC> permanent self dev <IFACE> Signed-off-by: NYan Burman <yanb@mellanox.com> Signed-off-by: NAmir Vadai <amirv@mellanox.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Yan Burman 提交于
Implement and advertise unicast MAC filtering, such that setting macvlan instance over mlx4_en interfaces will not require the networking core to put mlx4_en devices in promiscuous mode. If for some reason adding a unicast address filter fails e.g as of missing space in the HW mac table, the device forces itself into promiscuous mode (and out of this forced state when enough space is available). Signed-off-by: NYan Burman <yanb@mellanox.com> Signed-off-by: NAmir Vadai <amirv@mellanox.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Yan Burman 提交于
As a preparation step for supporting multiple unicast addresses, store MAC addresses in hash table. Remove the radix tree for MAC addresses per QP, as it's not in use. Signed-off-by: NYan Burman <yanb@mellanox.com> Signed-off-by: NAmir Vadai <amirv@mellanox.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Yan Burman 提交于
In preparation to having more than one unicast MAC per port, we need to keep track of the previous MAC address in the flow of ndo_set_mac_address, so that mlx4_en_replace_mac will know what to replace. Signed-off-by: NYan Burman <yanb@mellanox.com> Signed-off-by: NAmir Vadai <amirv@mellanox.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Yan Burman 提交于
Currently, mlx4_en_do_set_multicast serves as the ndo_set_rx_mode entry for mlx4_en, doing all related work. Split it to few calls, one per required functionality (e.g multicast, promiscuous, etc) and rename some structures and calls to use rx_mode notation instead of multicast. Signed-off-by: NYan Burman <yanb@mellanox.com> Signed-off-by: NAmir Vadai <amirv@mellanox.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-