Those should be const ptr to a const string, fix them.
Signed-off-by: NBorislav Petkov <bp@suse.de>

Both mci.mem_is_per_rank and mci.csbased denote the same thing: the
memory controller is csrows based. Merge both fields into one.

There's no need for the driver to actually fill it, as the core detects
it by checking if one of the layers has the csrows type as part of the
memory hierarchy:

	if (layers[i].type == EDAC_MC_LAYER_CHIP_SELECT)
			per_rank = true;
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
Signed-off-by: NBorislav Petkov <bp@suse.de>

We were filling the csrow size with a wrong value. 16a528ee ("EDAC:
Fix csrow size reported in sysfs") tried to address the issue. It fixed
the report with the old API but not with the new one. Correct it for the
new API too.
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
[ make it a per-csrow accounting regardless of ->channel_count ]
Signed-off-by: NBorislav Petkov <bp@suse.de>

Fixes lots of sparse warnings here.
Signed-off-by: NStephen Hemminger <stephen@networkplumber.org>
Signed-off-by: NBorislav Petkov <bp@suse.de>

It is hard to find what's wrong without a proper error
report. Improve it, in debug mode.
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Currently, sdram_scrub_rate sysfs node is created even if the device
doesn't support get/set the scub rate. Change the logic to only
create this device node when the operation is supported.
Reported-by: NFelipe Balbi <balbi@ti.com>
Acked-by: NBorislav Petkov <bp@suse.de>
Reviewed-by: NFelipe Balbi <balbi@ti.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Use device_unregister to replace put_device + device_del for
cleanup, and fix the potential use after free.
Signed-off-by: NLans Zhang <jia.zhang@windriver.com>
Signed-off-by: NBorislav Petkov <bp@alien8.de>

This patch fixes use-after-free and double-free bugs in
edac_mc_sysfs_exit(). mci_pdev has single reference and put_device()
calls mc_attr_release() which calls kfree(). The following
device_del() works with already released memory. An another kfree() in
edac_mc_sysfs_exit() releses the same memory again. Great.
Signed-off-by: NKonstantin Khlebnikov <khlebnikov@openvz.org>
Cc: stable@vger.kernel.org # 3.[67]
Cc: Denis Kirjanov <kirjanov@gmail.com>
Cc: Mauro Carvalho Chehab <mchehab@redhat.com>
Link: http://lkml.kernel.org/r/20121214110310.11019.21098.stgit@zurgSigned-off-by: NBorislav Petkov <bp@alien8.de>

Make sure proper deregistration happens on all error paths in
edac_mc_sysfs_init.
Signed-off-by: NDenis Kirjanov <kirjanov@gmail.com>
[ Boris: cleanup and concretize commit message ]
Signed-off-by: NBorislav Petkov <bp@alien8.de>

This removes an open coded simple_open() function and replaces file
operations references to the function with simple_open() instead.

dpatch engine is used to auto generate this patch.
(https://github.com/weiyj/dpatch)
Signed-off-by: NWei Yongjun <yongjun_wei@trendmicro.com.cn>
Signed-off-by: NBorislav Petkov <borislav.petkov@amd.com>

This is the complement to previous commit "EDAC: Fix csrow size
reported in sysfs". This fixes the memory controller size reporting on
csrow-based memory controllers. The csrow size is already combined for
both channels. Without this patch memory size is reported doubled.
Signed-off-by: NJosh Hunt <johunt@akamai.com>
Signed-off-by: NBorislav Petkov <borislav.petkov@amd.com>

On csrow-based memory controllers, we combine the csrow size from both
channels and there's no need to do that again in csrow_size_show which
leads to double the size of a csrow.

Fix it.
Signed-off-by: NBorislav Petkov <borislav.petkov@amd.com>

Initialize the mem_ctl_info descriptor of a csrow properly.
Signed-off-by: NBorislav Petkov <borislav.petkov@amd.com>

In order to test if the error counters are properly incremented,
add a way to specify how many errors were generated by a trace.
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Create a single, top-level "edac" directory for debugfs. An "mc[0-N]"
directory is then created for each memory controller. Individual drivers
can create additional entries such as h/w error injection control.
Signed-off-by: NRob Herring <rob.herring@calxeda.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

In order to avoid loosing error events, it is desirable to group
error events together and generate a single trace for several identical
errors.

The trace API already allows reporting multiple errors. Change the
handle_error function to also allow that.

The changes at the drivers were made by this small script:

	$file .=$_ while (<>);
	$file =~ s/(edac_mc_handle_error)\s*\(([^\,]+)\,([^\,]+)\,/$1($2,$3, 1,/g;
	print $file;
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Remove the arch-dependent parameter, as it were not used,
as the MCE tracepoint weren't implemented. It probably doesn't
make sense to have an MCE-specific tracepoint, as this will
cost more bytes at the tracepoint, and tracepoint is not free.

The changes at the EDAC drivers were done by this small perl script:

	$file .=$_ while (<>);
	$file =~ s/(edac_mc_handle_error)\s*\(([^\;]+)\,([^\,\)]+)\s*\)/$1($2)/g;
	print $file;
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

The edac_mc_alloc() routine allocates one dimm_info device for all
possible memories, including the non-filled ones. The debug messages
there are somewhat confusing. So, cleans them, by moving the code
that prints the memory location to edac_mc, and using it on both
edac_mc_sysfs and edac_mc.

Also, only dumps information when DIMM/ranks are actually
filled.

After this patch, a dimm-based memory controller will print the debug
info as:

[ 1011.380027] EDAC DEBUG: edac_mc_dump_csrow: csrow->csrow_idx = 0
[ 1011.380029] EDAC DEBUG: edac_mc_dump_csrow:   csrow = ffff8801169be000
[ 1011.380031] EDAC DEBUG: edac_mc_dump_csrow:   csrow->first_page = 0x0
[ 1011.380032] EDAC DEBUG: edac_mc_dump_csrow:   csrow->last_page = 0x0
[ 1011.380034] EDAC DEBUG: edac_mc_dump_csrow:   csrow->page_mask = 0x0
[ 1011.380035] EDAC DEBUG: edac_mc_dump_csrow:   csrow->nr_channels = 3
[ 1011.380037] EDAC DEBUG: edac_mc_dump_csrow:   csrow->channels = ffff8801149c2840
[ 1011.380039] EDAC DEBUG: edac_mc_dump_csrow:   csrow->mci = ffff880117426000
[ 1011.380041] EDAC DEBUG: edac_mc_dump_channel:   channel->chan_idx = 0
[ 1011.380042] EDAC DEBUG: edac_mc_dump_channel:     channel = ffff8801149c2860
[ 1011.380044] EDAC DEBUG: edac_mc_dump_channel:     channel->csrow = ffff8801169be000
[ 1011.380046] EDAC DEBUG: edac_mc_dump_channel:     channel->dimm = ffff88010fe90400
...
[ 1011.380095] EDAC DEBUG: edac_mc_dump_dimm: dimm0: channel 0 slot 0 mapped as virtual row 0, chan 0
[ 1011.380097] EDAC DEBUG: edac_mc_dump_dimm:   dimm = ffff88010fe90400
[ 1011.380099] EDAC DEBUG: edac_mc_dump_dimm:   dimm->label = 'CPU#0Channel#0_DIMM#0'
[ 1011.380101] EDAC DEBUG: edac_mc_dump_dimm:   dimm->nr_pages = 0x40000
[ 1011.380103] EDAC DEBUG: edac_mc_dump_dimm:   dimm->grain = 8
[ 1011.380104] EDAC DEBUG: edac_mc_dump_dimm:   dimm->nr_pages = 0x40000
...

(a rank-based memory controller would print, instead of "dimm?", "rank?"
 on the above debug info)
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Use a more common debugging style.

Remove __FILE__ uses, add missing newlines,
coalesce formats and align arguments.
Signed-off-by: NJoe Perches <joe@perches.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

The debug macro already adds that. Most of the work here was
made by this small script:

$f .=$_ while (<>);

$f =~ s/(debugf[0-9]\s*\(\s*)__FILE__\s*": /\1"/g;
$f =~ s/(debugf[0-9]\s*\(\s*)__FILE__\s*/\1/g;
$f =~ s/(debugf[0-9]\s*\(\s*)__FILE__\s*"MC: /\1"/g;

$f =~ s/(debugf[0-9]\s*\(\")\%s[\:\,\(\)]*\s*([^\"]*\s*[^\)]+)__func__\s*\,\s*/\1\2/g;
$f =~ s/(debugf[0-9]\s*\(\")\%s[\:\,\(\)]*\s*([^\"]*\s*[^\)]+),\s*__func__\s*\)/\1\2)/g;
$f =~ s/(debugf[0-9]\s*\(\"MC\:\s*)\%s[\:\,\(\)]*\s*([^\"]*\s*[^\)]+)__func__\s*\,\s*/\1\2/g;
$f =~ s/(debugf[0-9]\s*\(\"MC\:\s*)\%s[\:\,\(\)]*\s*([^\"]*\s*[^\)]+),\s*__func__\s*\)/\1\2)/g;

$f =~ s/\"MC\: \\n\"/"MC:\\n"/g;

print $f;

After running the script, manual cleanups were done to fix it the remaining
places.

While here, removed the __LINE__ on most places, as it doesn't actually give
useful info on most places.
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Kernel kobjects have rigid rules: each container object should be
dynamically allocated, and can't be allocated into a single kmalloc.

EDAC never obeyed this rule: it has a single malloc function that
allocates all needed data into a single kzalloc.

As this is not accepted anymore, change the allocation schema of the
EDAC *_info structs to enforce this Kernel standard.
Acked-by: NChris Metcalf <cmetcalf@tilera.com>
Cc: Aristeu Rozanski <arozansk@redhat.com>
Cc: Doug Thompson <norsk5@yahoo.com>
Cc: Greg K H <gregkh@linuxfoundation.org>
Cc: Borislav Petkov <borislav.petkov@amd.com>
Cc: Mark Gross <mark.gross@intel.com>
Cc: Tim Small <tim@buttersideup.com>
Cc: Ranganathan Desikan <ravi@jetztechnologies.com>
Cc: "Arvind R." <arvino55@gmail.com>
Cc: Olof Johansson <olof@lixom.net>
Cc: Egor Martovetsky <egor@pasemi.com>
Cc: Michal Marek <mmarek@suse.cz>
Cc: Jiri Kosina <jkosina@suse.cz>
Cc: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Hitoshi Mitake <h.mitake@gmail.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Shaohui Xie <Shaohui.Xie@freescale.com>
Cc: linuxppc-dev@lists.ozlabs.org
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

This patch actually fixes a bug with the legacy API, where, at the
same csrow, some channels may have different DIMMs. This can happen
on FB-DIMM/RAMBUS and modern Intel controllers.

This is the case, for example, of Nehalem machines:

$ ./edac-ctl --layout
       +-----------------------------------+
       |                mc0                |
       | channel0  | channel1  | channel2  |
-------+-----------------------------------+
slot2: |     0 MB  |     0 MB  |     0 MB  |
slot1: |  1024 MB  |     0 MB  |     0 MB  |
slot0: |  1024 MB  |  1024 MB  |  1024 MB  |
-------+-----------------------------------+

Before this patch, non-filled memories were shown. Now, only what's
filled is there:

grep . /sys/devices/system/edac/mc/mc0/csrow*/ch?*
/sys/devices/system/edac/mc/mc0/csrow0/ch0_ce_count:0
/sys/devices/system/edac/mc/mc0/csrow0/ch0_dimm_label:CPU#0Channel#0_DIMM#0
/sys/devices/system/edac/mc/mc0/csrow0/ch1_ce_count:0
/sys/devices/system/edac/mc/mc0/csrow0/ch1_dimm_label:CPU#0Channel#0_DIMM#1
/sys/devices/system/edac/mc/mc0/csrow1/ch0_ce_count:0
/sys/devices/system/edac/mc/mc0/csrow1/ch0_dimm_label:CPU#0Channel#1_DIMM#0
/sys/devices/system/edac/mc/mc0/csrow2/ch0_ce_count:0
/sys/devices/system/edac/mc/mc0/csrow2/ch0_dimm_label:CPU#0Channel#2_DIMM#0

Thanks-to: Aristeu Rozanski Filho <arozansk@redhat.com>
Reviewed-by: NAristeu Rozanski <arozansk@redhat.com>
Cc: Doug Thompson <norsk5@yahoo.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Sometimes, it is useful to have a mechanism that generates fake
errors, in order to test the EDAC core code, and the userspace
tools.

Provide such mechanism by adding a few debugfs nodes.
Reviewed-by: NAristeu Rozanski <arozansk@redhat.com>
Cc: Doug Thompson <norsk5@yahoo.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

The userspace tools need to know what's the maximum location on each
system, as it helps to create nice maps showing how the memory was
filled at the system.
Reviewed-by: NAristeu Rozanski <arozansk@redhat.com>
Cc: Doug Thompson <norsk5@yahoo.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

The old EDAC API is broken. It only works fine for systems manufatured
before 2005 and for AMD 64. The reason is that it forces all memory
controller drivers to discover rank info.

Also, it doesn't allow grouping the several ranks into a DIMM.

So, what almost all modern drivers do is to create a fake virtual-rank
information, and use it to cheat the EDAC core to accept the driver.

While this works if the user has enough time to discover what DIMM slot
corresponds to each "virtual-rank" information, it prevents EDAC usage
for users with less available time. It also makes life hard for vendors
that may want to provide a table with their motherboards to the userspace
tool (edac-utils) as each driver has its own logic for the virtual
mapping.

So, the old API should be removed, in favor of a more flexible API that
allows newer drivers to not lie to the EDAC core.
Reviewed-by: NAristeu Rozanski <arozansk@redhat.com>
Cc: Doug Thompson <norsk5@yahoo.com>
Cc: Borislav Petkov <borislav.petkov@amd.com>
Cc: Randy Dunlap <rdunlap@xenotime.net>
Cc: Josh Boyer <jwboyer@redhat.com>
Cc: Hui Wang <jason77.wang@gmail.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

The EDAC subsystem uses the old struct sysdev approach,
creating all nodes using the raw sysfs API. This is bad,
as the API is deprecated.

As we'll be changing the EDAC API, let's first port the existing
code to struct device.

There's one drawback on this patch: driver-specific sysfs
nodes, used by mpc85xx_edac, amd64_edac and i7core_edac
 won't be created anymore. While it would be possible to
also port the device-specific code, that would mix kobj with
struct device, with is not recommended. Also, it is easier and nicer
to move the code to the drivers, instead, as the core can get rid
of some complex logic that just emulates what the device_add()
and device_create_file() already does.

The next patches will convert the driver-specific code to use
the device-specific calls. Then, the remaining bits of the old
sysfs API will be removed.

NOTE: a per-MC bus is required, otherwise devices with more than
one memory controller will hit a bug like the one below:

[  819.094946] EDAC DEBUG: find_mci_by_dev: find_mci_by_dev()
[  819.094948] EDAC DEBUG: edac_create_sysfs_mci_device: edac_create_sysfs_mci_device() idx=1
[  819.094952] EDAC DEBUG: edac_create_sysfs_mci_device: edac_create_sysfs_mci_device(): creating device mc1
[  819.094967] EDAC DEBUG: edac_create_sysfs_mci_device: edac_create_sysfs_mci_device creating dimm0, located at channel 0 slot 0
[  819.094984] ------------[ cut here ]------------
[  819.100142] WARNING: at fs/sysfs/dir.c:481 sysfs_add_one+0xc1/0xf0()
[  819.107282] Hardware name: S2600CP
[  819.111078] sysfs: cannot create duplicate filename '/bus/edac/devices/dimm0'
[  819.119062] Modules linked in: sb_edac(+) edac_core ip6table_filter ip6_tables ebtable_nat ebtables ipt_MASQUERADE iptable_nat nf_nat nf_conntrack_ipv4 nf_defrag_ipv4 xt_state nf_conntrack ipt_REJECT xt_CHECKSUM iptable_mangle iptable_filter ip_tables bridge stp llc sunrpc binfmt_misc dm_mirror dm_region_hash dm_log vhost_net macvtap macvlan tun kvm microcode pcspkr iTCO_wdt iTCO_vendor_support igb i2c_i801 i2c_core sg ioatdma dca sr_mod cdrom sd_mod crc_t10dif ahci libahci isci libsas libata scsi_transport_sas scsi_mod wmi dm_mod [last unloaded: scsi_wait_scan]
[  819.175748] Pid: 10902, comm: modprobe Not tainted 3.3.0-0.11.el7.v12.2.x86_64 #1
[  819.184113] Call Trace:
[  819.186868]  [<ffffffff8105adaf>] warn_slowpath_common+0x7f/0xc0
[  819.193573]  [<ffffffff8105aea6>] warn_slowpath_fmt+0x46/0x50
[  819.200000]  [<ffffffff811f53d1>] sysfs_add_one+0xc1/0xf0
[  819.206025]  [<ffffffff811f5cf5>] sysfs_do_create_link+0x135/0x220
[  819.212944]  [<ffffffff811f7023>] ? sysfs_create_group+0x13/0x20
[  819.219656]  [<ffffffff811f5df3>] sysfs_create_link+0x13/0x20
[  819.226109]  [<ffffffff813b04f6>] bus_add_device+0xe6/0x1b0
[  819.232350]  [<ffffffff813ae7cb>] device_add+0x2db/0x460
[  819.238300]  [<ffffffffa0325634>] edac_create_dimm_object+0x84/0xf0 [edac_core]
[  819.246460]  [<ffffffffa0325e18>] edac_create_sysfs_mci_device+0xe8/0x290 [edac_core]
[  819.255215]  [<ffffffffa0322e2a>] edac_mc_add_mc+0x5a/0x2c0 [edac_core]
[  819.262611]  [<ffffffffa03412df>] sbridge_register_mci+0x1bc/0x279 [sb_edac]
[  819.270493]  [<ffffffffa03417a3>] sbridge_probe+0xef/0x175 [sb_edac]
[  819.277630]  [<ffffffff813ba4e8>] ? pm_runtime_enable+0x58/0x90
[  819.284268]  [<ffffffff812f430c>] local_pci_probe+0x5c/0xd0
[  819.290508]  [<ffffffff812f5ba1>] __pci_device_probe+0xf1/0x100
[  819.297117]  [<ffffffff812f5bea>] pci_device_probe+0x3a/0x60
[  819.303457]  [<ffffffff813b1003>] really_probe+0x73/0x270
[  819.309496]  [<ffffffff813b138e>] driver_probe_device+0x4e/0xb0
[  819.316104]  [<ffffffff813b149b>] __driver_attach+0xab/0xb0
[  819.322337]  [<ffffffff813b13f0>] ? driver_probe_device+0xb0/0xb0
[  819.329151]  [<ffffffff813af5d6>] bus_for_each_dev+0x56/0x90
[  819.335489]  [<ffffffff813b0d7e>] driver_attach+0x1e/0x20
[  819.341534]  [<ffffffff813b0980>] bus_add_driver+0x1b0/0x2a0
[  819.347884]  [<ffffffffa0347000>] ? 0xffffffffa0346fff
[  819.353641]  [<ffffffff813b19f6>] driver_register+0x76/0x140
[  819.359980]  [<ffffffff8159f18b>] ? printk+0x51/0x53
[  819.365524]  [<ffffffffa0347000>] ? 0xffffffffa0346fff
[  819.371291]  [<ffffffff812f5896>] __pci_register_driver+0x56/0xd0
[  819.378096]  [<ffffffffa0347054>] sbridge_init+0x54/0x1000 [sb_edac]
[  819.385231]  [<ffffffff8100203f>] do_one_initcall+0x3f/0x170
[  819.391577]  [<ffffffff810bcd2e>] sys_init_module+0xbe/0x230
[  819.397926]  [<ffffffff815bb529>] system_call_fastpath+0x16/0x1b
[  819.404633] ---[ end trace 1654fdd39556689f ]---

This happens because the bus is not being properly initialized.
Instead of putting the memory sub-devices inside the memory controller,
it is putting everything under the same directory:

$ tree /sys/bus/edac/
/sys/bus/edac/
├── devices
│   ├── all_channel_counts -> ../../../devices/system/edac/mc/mc0/all_channel_counts
│   ├── csrow0 -> ../../../devices/system/edac/mc/mc0/csrow0
│   ├── csrow1 -> ../../../devices/system/edac/mc/mc0/csrow1
│   ├── csrow2 -> ../../../devices/system/edac/mc/mc0/csrow2
│   ├── dimm0 -> ../../../devices/system/edac/mc/mc0/dimm0
│   ├── dimm1 -> ../../../devices/system/edac/mc/mc0/dimm1
│   ├── dimm3 -> ../../../devices/system/edac/mc/mc0/dimm3
│   ├── dimm6 -> ../../../devices/system/edac/mc/mc0/dimm6
│   ├── inject_addrmatch -> ../../../devices/system/edac/mc/mc0/inject_addrmatch
│   ├── mc -> ../../../devices/system/edac/mc
│   └── mc0 -> ../../../devices/system/edac/mc/mc0
├── drivers
├── drivers_autoprobe
├── drivers_probe
└── uevent

On a multi-memory controller system, the names "csrow%d" and "dimm%d"
should be under "mc%d", and not at the main hierarchy level.

So, we need to create a per-MC bus, in order to have its own namespace.
Reviewed-by: NAristeu Rozanski <arozansk@redhat.com>
Cc: Doug Thompson <norsk5@yahoo.com>
Cc: Greg K H <gregkh@linuxfoundation.org>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

As EDAC doesn't use struct device itself, it created a parent dev
pointer called as "pdev".  Now that we'll be converting it to use
struct device, instead of struct devsys, this needs to be fixed.

No functional changes.
Reviewed-by: NAristeu Rozanski <arozansk@redhat.com>
Acked-by: NChris Metcalf <cmetcalf@tilera.com>
Cc: Doug Thompson <norsk5@yahoo.com>
Cc: Borislav Petkov <borislav.petkov@amd.com>
Cc: Mark Gross <mark.gross@intel.com>
Cc: Jason Uhlenkott <juhlenko@akamai.com>
Cc: Tim Small <tim@buttersideup.com>
Cc: Ranganathan Desikan <ravi@jetztechnologies.com>
Cc: "Arvind R." <arvino55@gmail.com>
Cc: Olof Johansson <olof@lixom.net>
Cc: Egor Martovetsky <egor@pasemi.com>
Cc: Michal Marek <mmarek@suse.cz>
Cc: Jiri Kosina <jkosina@suse.cz>
Cc: Joe Perches <joe@perches.com>
Cc: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Hitoshi Mitake <h.mitake@gmail.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: "Niklas Söderlund" <niklas.soderlund@ericsson.com>
Cc: Shaohui Xie <Shaohui.Xie@freescale.com>
Cc: Josh Boyer <jwboyer@gmail.com>
Cc: linuxppc-dev@lists.ozlabs.org
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

While userspace doesn't fill the dimm labels, add there the dimm location,
as described by the used memory model. This could eventually match what
is described at the dmidecode, making easier for people to identify the
memory.

For example, on an Intel motherboard where the DMI table is reliable,
the first memory stick is described as:

Memory Device
	Array Handle: 0x0029
	Error Information Handle: Not Provided
	Total Width: 64 bits
	Data Width: 64 bits
	Size: 2048 MB
	Form Factor: DIMM
	Set: 1
	Locator: A1_DIMM0
	Bank Locator: A1_Node0_Channel0_Dimm0
	Type: <OUT OF SPEC>
	Type Detail: Synchronous
	Speed: 800 MHz
	Manufacturer: A1_Manufacturer0
	Serial Number: A1_SerNum0
	Asset Tag: A1_AssetTagNum0
	Part Number: A1_PartNum0

The memory named as "A1_DIMM0" is physically located at the first
memory controller (node 0), at channel 0, dimm slot 0.

After this patch, the memory label will be filled with:
	/sys/devices/system/edac/mc/csrow0/ch0_dimm_label:mc#0channel#0slot#0

And (after the new EDAC API patches) as:
	/sys/devices/system/edac/mc/mc0/dimm0/dimm_label:mc#0channel#0slot#0

So, even if the memory label is not initialized on userspace, an useful
information with the error location is filled there, expecially since
several systems/motherboards are provided with enough info to map from
channel/slot (or branch/channel/slot) into the DIMM label. So, letting the
EDAC core fill it by default is a good thing.

It should noticed that, as the label filling happens at the
edac_mc_alloc(), drivers can override it to better describe the memories
(and some actually do it).

Cc: Aristeu Rozanski <arozansk@redhat.com>
Cc: Doug Thompson <norsk5@yahoo.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

The number of pages is a dimm property. Move it to the dimm struct.

After this change, it is possible to add sysfs nodes for the DIMM's that
will properly represent the DIMM stick properties, including its size.

A TODO fix here is to properly represent dual-rank/quad-rank DIMMs when
the memory controller represents the memory via chip select rows.
Reviewed-by: NAristeu Rozanski <arozansk@redhat.com>
Acked-by: NBorislav Petkov <borislav.petkov@amd.com>
Acked-by: NChris Metcalf <cmetcalf@tilera.com>
Cc: Doug Thompson <norsk5@yahoo.com>
Cc: Mark Gross <mark.gross@intel.com>
Cc: Jason Uhlenkott <juhlenko@akamai.com>
Cc: Tim Small <tim@buttersideup.com>
Cc: Ranganathan Desikan <ravi@jetztechnologies.com>
Cc: "Arvind R." <arvino55@gmail.com>
Cc: Olof Johansson <olof@lixom.net>
Cc: Egor Martovetsky <egor@pasemi.com>
Cc: Michal Marek <mmarek@suse.cz>
Cc: Jiri Kosina <jkosina@suse.cz>
Cc: Joe Perches <joe@perches.com>
Cc: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Hitoshi Mitake <h.mitake@gmail.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: "Niklas Söderlund" <niklas.soderlund@ericsson.com>
Cc: Shaohui Xie <Shaohui.Xie@freescale.com>
Cc: Josh Boyer <jwboyer@gmail.com>
Cc: linuxppc-dev@lists.ozlabs.org
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

On systems based on chip select rows, all channels need to use memories
with the same properties, otherwise the memories on channels A and B
won't be recognized.

However, such assumption is not true for all types of memory
controllers.

Controllers for FB-DIMM's don't have such requirements.

Also, modern Intel controllers seem to be capable of handling such
differences.

So, we need to get rid of storing the DIMM information into a per-csrow
data, storing it, instead at the right place.

The first step is to move grain, mtype, dtype and edac_mode to the
per-dimm struct.
Reviewed-by: NAristeu Rozanski <arozansk@redhat.com>
Reviewed-by: NBorislav Petkov <borislav.petkov@amd.com>
Acked-by: NChris Metcalf <cmetcalf@tilera.com>
Cc: Doug Thompson <norsk5@yahoo.com>
Cc: Borislav Petkov <borislav.petkov@amd.com>
Cc: Mark Gross <mark.gross@intel.com>
Cc: Jason Uhlenkott <juhlenko@akamai.com>
Cc: Tim Small <tim@buttersideup.com>
Cc: Ranganathan Desikan <ravi@jetztechnologies.com>
Cc: "Arvind R." <arvino55@gmail.com>
Cc: Olof Johansson <olof@lixom.net>
Cc: Egor Martovetsky <egor@pasemi.com>
Cc: Michal Marek <mmarek@suse.cz>
Cc: Jiri Kosina <jkosina@suse.cz>
Cc: Joe Perches <joe@perches.com>
Cc: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Hitoshi Mitake <h.mitake@gmail.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: James Bottomley <James.Bottomley@parallels.com>
Cc: "Niklas Söderlund" <niklas.soderlund@ericsson.com>
Cc: Shaohui Xie <Shaohui.Xie@freescale.com>
Cc: Josh Boyer <jwboyer@gmail.com>
Cc: Mike Williams <mike@mikebwilliams.com>
Cc: linuxppc-dev@lists.ozlabs.org
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

The way a DIMM is currently represented implies that they're
linked into a per-csrow struct. However, some drivers don't see
csrows, as they're ridden behind some chip like the AMB's
on FBDIMM's, for example.

This forced drivers to fake^Wvirtualize a csrow struct, and to create
a mess under csrow/channel original's concept.

Move the DIMM labels into a per-DIMM struct, and add there
the real location of the socket, in terms of csrow/channel.
Latter patches will modify the location to properly represent the
memory architecture.

All other drivers will use a per-csrow type of location.
Some of those drivers will require a latter conversion, as
they also fake the csrows internally.

TODO: While this patch doesn't change the existing behavior, on
csrows-based memory controllers, a csrow/channel pair points to a memory
rank. There's a known bug at the EDAC core that allows having different
labels for the same DIMM, if it has more than one rank. A latter patch
is need to merge the several ranks for a DIMM into the same dimm_info
struct, in order to avoid having different labels for the same DIMM.

The edac_mc_alloc() will now contain a per-dimm initialization loop that
will be changed by latter patches in order to match other types of
memory architectures.
Reviewed-by: NAristeu Rozanski <arozansk@redhat.com>
Reviewed-by: NBorislav Petkov <borislav.petkov@amd.com>
Cc: Doug Thompson <norsk5@yahoo.com>
Cc: Ranganathan Desikan <ravi@jetztechnologies.com>
Cc: "Arvind R." <arvino55@gmail.com>
Cc: "Niklas Söderlund" <niklas.soderlund@ericsson.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

The original scrub rate API definition states that if scrub rate
accessors are not implemented, a negative value (-1) should be written
to the sysfs file (/sys/devices/system/edac/mc/mc<N>/sdram_scrub_rate,
where N is the memory controller number on the system). This is
counter-intuitive and awkward at the very least because, when setting
the scrub rate, userspace has to write to sysfs and then read it back to
check error status of the operation.

As Tony notes, best it would be to not have the sdram_scrub_rate in
sysfs if scrub rate support is not implemented. It is too late about
that and a bunch of drivers on a bunch of arches would need to be
changed and tested which is not a trivial task ATM.

Instead, settle for the next best thing of returning -ENODEV when
implementation is missing and -EINVAL when there was an error
encountered while setting the scrub rate.
Reported-by: NHan Pingtian <phan@redhat.com>
Cc: Tony Luck <tony.luck@intel.com>
Link: http://lkml.kernel.org/r/20110916105856.GA13253@hpt.nay.redhat.comSigned-off-by: NBorislav Petkov <borislav.petkov@amd.com>

After all sysdev classes are ported to regular driver core entities, the
sysdev implementation will be entirely removed from the kernel.

Cc: Doug Thompson <dougthompson@xmission.com>
Cc: Paul Gortmaker <paul.gortmaker@windriver.com>
Cc: Lucas De Marchi <lucas.demarchi@profusion.mobi>
Cc: Borislav Petkov <borislav.petkov@amd.com>
Signed-off-by: NKay Sievers <kay.sievers@vrfy.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

This patch removes superfluous debugging output in the sysfs scrub rate
handler. It also consolidates the error handling in the scrub rate
accessors.
Signed-off-by: NMarkus Trippelsdorf <markus@trippelsdorf.de>
Signed-off-by: NBorislav Petkov <borislav.petkov@amd.com>

Fixes generated by 'codespell' and manually reviewed.
Signed-off-by: NLucas De Marchi <lucas.demarchi@profusion.mobi>

Raise the debug level of these routines so that their output get issued
out only when the highest debug level is selected. Otherwise, don't
pollute driver debug output.
Signed-off-by: NBorislav Petkov <borislav.petkov@amd.com>

Make the ->{get|set}_sdram_scrub_rate return the actual scrub rate
bandwidth it succeeded setting and remove superfluous arg pointer used
for that. A negative value returned still means that an error occurred
while setting the scrubrate. Document this for future reference.
Signed-off-by: NBorislav Petkov <borislav.petkov@amd.com>

This is a nasty bug. Since kobject count will be reduced by zero by
edac_mc_del_mc(), and this triggers the kobj release method, the
mci memory will be freed automatically. So, all we have left is ctl_name,
as shown by enabling debug:

[   80.822186] EDAC DEBUG: in drivers/edac/edac_mc_sysfs.c, line at 1020: edac_remove_sysfs_mci_device()  remove_link
[   80.832590] EDAC DEBUG: in drivers/edac/edac_mc_sysfs.c, line at 1024: edac_remove_sysfs_mci_device()  remove_mci_instance
[   80.843776] EDAC DEBUG: in drivers/edac/edac_mc_sysfs.c, line at 640: edac_mci_control_release() mci instance idx=0 releasing
[   80.855163] EDAC MC: Removed device 0 for i7core_edac.c i7 core #0: DEV 0000:3f:03.0
[   80.862936] EDAC DEBUG: in drivers/edac/i7core_edac.c, line at 2089: (null): free structs
[   80.871134] EDAC DEBUG: in drivers/edac/edac_mc.c, line at 238: edac_mc_free()
[   80.878379] EDAC DEBUG: in drivers/edac/edac_mc_sysfs.c, line at 726: edac_mc_unregister_sysfs_main_kobj()
[   80.888043] EDAC DEBUG: in drivers/edac/i7core_edac.c, line at 1232: drivers/edac/i7core_edac.c: i7core_put_devices()

Also, kfree(mci) shouldn't happen at the kobj.release, as it happens
when edac_remove_sysfs_mci_device() is called, but the logic is:
	edac_remove_sysfs_mci_device(mci);
	edac_printk(KERN_INFO, EDAC_MC,
		"Removed device %d for %s %s: DEV %s\n", mci->mc_idx,
		mci->mod_name, mci->ctl_name, edac_dev_name(mci));
So, as the edac_printk() needs the mci struct, this generates an OOPS.
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

This is important to track a nasty bug at the free logic.
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

A very nasty bug were happening on edac core, due to the way mci objects are
freed. mci memory is freed when kobject count reaches zero, by
edac_mci_control_release(). However, from the logs, this is clearly happening
before the final usage of mci struct:

[15799.607454] EDAC DEBUG: in drivers/edac/edac_mc_sysfs.c, line at 640: edac_mci_control_release() mci instance idx=0 releasing
[15799.618773] EDAC DEBUG: in drivers/edac/edac_mc_sysfs.c, line at 769: edac_inst_grp_release()
[15799.627326] EDAC DEBUG: in drivers/edac/edac_mc_sysfs.c, line at 894: edac_remove_mci_instance_attributes() end of seeking for group all_channel_counts
[15799.640887] EDAC DEBUG: in drivers/edac/edac_mc_sysfs.c, line at 877: edac_remove_mci_instance_attributes() sysfs_attrib = ffffffffa01d7240
[15799.653412] EDAC DEBUG: in drivers/edac/edac_mc_sysfs.c, line at 1020: edac_remove_sysfs_mci_device()  remove_link
[15799.663753] EDAC DEBUG: in drivers/edac/edac_mc_sysfs.c, line at 1024: edac_remove_sysfs_mci_device()  remove_mci_instance
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>