When FCoE is enabled with SR-IOV on the X550 NIC the hardware
generates MDD events.

This patch fixes these by setting the expected values in the
Tx context descriptors for FCoE/FIP frames and adding a flush
after writing the RDLEN register.
Signed-off-by: NNeerav Parikh <neerav.parikh@intel.com>
Tested-by: NPhil Schmitt <phillip.j.schmitt@intel.com>
Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>

Check whether the FCOE support is enabled for the devices to get the
 FDMI HBA attributes information instead of checking each device id.
Also, add Model string information for X550.
Signed-off-by: NUsha Ketineni <usha.k.ketineni@intel.com>
Tested-by: NPhil Schmitt <phillip.j.schmitt@intel.com>
Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>

If an outer UDP checksum is set, pass the skb up with CHECKSUM_NONE
so that the stack will check the checksum. Do not increment an
error counter, because we don't know that there is an actual error.
Signed-off-by: NMark Rustad <mark.d.rustad@intel.com>
Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>

In ixgbe_get_settings() the link status and speed of the interface
are determined based on a read from the LINKS register via the call
to mac.ops.check.link(). This can cause issues where external drivers
may end up with unknown speed when calling ethtool_get_setings().

Instead of calling the mac.ops.check_link() we can report the speed
from the adapter structure which is populated by the driver.
Signed-off-by: NEmil Tantilov <emil.s.tantilov@intel.com>
Tested-by: NPhil Schmitt <phillip.j.schmitt@intel.com>
Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>

PFC is configuration is skipped for X550 devices due to a incorrect
device id check, fixing that to include X550 PFC configuration.
Signed-off-by: NVasu Dev <vasu.dev@intel.com>
Tested-by: NPhil Schmitt <phillip.j.schmitt@intel.com>
Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>

Use fcoe_ddp_xid from netdev as this is correctly set for different
device IDs to avoid DDP skip error on X550 as "xid=0x20b out-of-range"
Signed-off-by: NVasu Dev <vasu.dev@intel.com>
Tested-by: NPhil Schmitt <phillip.j.schmitt@intel.com>
Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>

Currently credit_refill and credit_max could be zero for a TC and that
is causing Tx hang for CEE mode configuration, so to fix that have at
min credit assigned to a TC and that is as what IEEE mode already does.

Change-ID: If652c133093a21e530f4e9eab09097976f57fb12
Signed-off-by: NVasu Dev <vasu.dev@intel.com>
Tested-by: NPhil Schmitt <phillip.j.schmitt@intel.com>
Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>

Neil Armstrong says:

====================
Add new capability and macb DT variant

The first patch introduces a new capability bit to disable usage of the
USRIO register on platform not implementing it thus avoiding some external
imprecise aborts on ARM based platforms.
The two last patchs adds a new macb variant compatible name using the
capability, the NP4 SoC uses this particular hardware configuration.

v1: http://lkml.kernel.org/r/1449485914-12883-1-git-send-email-narmstrong@baylibre.com
v2: http://lkml.kernel.org/r/1449582726-6148-1-git-send-email-narmstrong@baylibre.com
v3: http://lkml.kernel.org/r/1451898103-21868-1-git-send-email-narmstrong@baylibre.com
v4: http://lkml.kernel.org/r/1451900573-22657-1-git-send-email-narmstrong@baylibre.com
v5: switch SoC name to non-generic NP4 name
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Add NP4 macb SoC variant.
Signed-off-by: NNeil Armstrong <narmstrong@baylibre.com>
Acked-by: NNicolas Ferre <nicolas.ferre@atmel.com>
Acked-by: NRob Herring <robh@kernel.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Declare a new NP4 SoC variant having USRIO_DISABLED as capability bit.
Signed-off-by: NNeil Armstrong <narmstrong@baylibre.com>
Acked-by: NNicolas Ferre <nicolas.ferre@atmel.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

On some platforms, the macb integration does not use the USRIO
register to configure the (R)MII port and clocks.
When the register is not implemented and the MACB error signal
is connected to the bus error, reading or writing to the USRIO
register can trigger some Imprecise External Aborts on ARM platforms.
Signed-off-by: NNeil Armstrong <narmstrong@baylibre.com>
Acked-by: NNicolas Ferre <nicolas.ferre@atmel.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Andrew Lunn says:

====================
Support MDIO devices

The discussions about changing the way DSA probes switches resulted in
the wish to have switches attached to an MDIO bus to be represented as
an MDIO device. However the current code only supports PHYs on MDIO
busses. This patchset remedies this problem. It consists of a number
of cleanups, abstraction for accessing structure members, and
refactoring, as well as adding the concept of a generic MDIO device
and MDIO driver.

v2:
Added Reviewed-by from Florian
Made phydev_name() an inline function
Added phy_attached_info/phy_attached_print() for information about
the attached phy.
Removed now redundant irq setup from of_mdio.c
Dropped hunks from PHYMII ioctl which prevented access to any address
DSA carrier off before phy setup
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Make device_free and device_remove operations in the mdio device
structure, so the core code does not need to differentiate between
phy devices and generic mdio devices.
Signed-off-by: NAndrew Lunn <andrew@lunn.ch>
Reviewed-by: NFlorian Fainelli <f.fainelli@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Not all devices on an MDIO bus are PHYs. Meaning not all MDIO drivers
are PHY drivers. Add support for generic MDIO drivers.
Signed-off-by: NAndrew Lunn <andrew@lunn.ch>
Reviewed-by: NFlorian Fainelli <f.fainelli@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Make it clear that mdiobus_scan () will only find devices which have a
vendor/product ID in registers 2 and 3. These are typically PHY
devices. Other sort of MDIO devices, such as switches, are not
expected to be found during the scan.

Similarly, __mdiobus_register(), which calls mdiobus_scan() will only
find PHY devices, and other sorts of MDIO devices are expected to be
instantiated from device tree.
Signed-off-by: NAndrew Lunn <andrew@lunn.ch>
Reviewed-by: NFlorian Fainelli <f.fainelli@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This function should work with any sort of MDIO device which can be
probed on the bus, not just PHY devices. So generalise it.
Signed-off-by: NAndrew Lunn <andrew@lunn.ch>
Reviewed-by: NFlorian Fainelli <f.fainelli@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Matching a driver to a device has both generic parts, and parts which
are specific to PHY devices. Move the PHY specific parts into
phy_device.
Signed-off-by: NAndrew Lunn <andrew@lunn.ch>
Reviewed-by: NFlorian Fainelli <f.fainelli@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Rather than have each driver set the driver owner field, do it once in
the core code. This will also help with later changes, when the device
structure will move.
Signed-off-by: NAndrew Lunn <andrew@lunn.ch>
Reviewed-by: NFlorian Fainelli <f.fainelli@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The MDIO PM operations are really PHY device PM operations. So move
them into phy_device. This will be needed when we support devices on
the mdio bus which are not PHYs.
Signed-off-by: NAndrew Lunn <andrew@lunn.ch>
Reviewed-by: NFlorian Fainelli <f.fainelli@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

When the phy is connected, an info message is printed. If the netdev
it is attached to has not been registered yet, the name
'uninitialised' in the output. By registering the netdev first, then
connecting they phy, we can avoid this.
Signed-off-by: NAndrew Lunn <andrew@lunn.ch>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The mdio_bus exports three attributes:

- PHY ID is the unique 32-bits identifier for a MDIO device implementing
  standard MII registers MII_PHYSID1/2, which is not guaranteed to be the
  case for non-standard compliant devices (e.g: Ethernet switches)

- PHY interface describes the data-path of the PHY/MDIO device, which is
  not strictly a PHY thing, but is required and needed for PHY devices to
  function, a MDIO device could be a control device exclusively

- PHY has fixups describes what the PHY driver may have done, so
  completely PHY specific

These are all phy attributes, not generic mdio attributes. So move the
attributes into the phy device code.
Signed-off-by: NAndrew Lunn <andrew@lunn.ch>
Reviewed-by: NFlorian Fainelli <f.fainelli@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Rather than have drivers directly manipulate the mii_bus structure,
provide and API for registering and unregistering devices on an MDIO
bus, and performing lookups.
Signed-off-by: NAndrew Lunn <andrew@lunn.ch>
Reviewed-by: NFlorian Fainelli <f.fainelli@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

We will soon support devices other than phys on the mdio bus. Look at
a child's compatibility string to determine if it is a phy, before
registering a phy device.
Signed-off-by: NAndrew Lunn <andrew@lunn.ch>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Not all devices attached to an MDIO bus are phys. So add an
mdio_device structure to represent the generic parts of an mdio
device, and place this structure into the phy_device.
Signed-off-by: NAndrew Lunn <andrew@lunn.ch>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Have mdio_alloc() create the array of interrupt numbers, and
initialize it to POLLING. This is what most MDIO drivers want, so
allowing code to be removed from the drivers.
Signed-off-by: NAndrew Lunn <andrew@lunn.ch>
Reviewed-by: NFlorian Fainelli <f.fainelli@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Rather than use devm_kzalloc(), use the mdio helper function.
Signed-off-by: NAndrew Lunn <andrew@lunn.ch>
Reviewed-by: NFlorian Fainelli <f.fainelli@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Many Ethernet drivers contain the same netdev_info() print statement
about the attached phy. Move it into the phy device code. Additionally
add a varargs function which can be used to append additional
information.
Signed-off-by: NAndrew Lunn <andrew@lunn.ch>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The address of the device can be determined from the phydev structure,
rather than passing it as a parameter.
Signed-off-by: NAndrew Lunn <andrew@lunn.ch>
Reviewed-by: NFlorian Fainelli <f.fainelli@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Replace the open coded search for the first phy with a call to the
existing helper function.
Signed-off-by: NAndrew Lunn <andrew@lunn.ch>
Reviewed-by: NFlorian Fainelli <f.fainelli@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Add a phydev_name() function, to help with moving some structure members
from phy_device.
Signed-off-by: NAndrew Lunn <andrew@lunn.ch>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

In preparation for moving some of the phy_device structure members,
add macros for printing errors and debug information.
Signed-off-by: NAndrew Lunn <andrew@lunn.ch>
Reviewed-by: NFlorian Fainelli <f.fainelli@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Since we have a phydev, make use of it and the phy_read() function.
This will help with later refactoring.
Signed-off-by: NAndrew Lunn <andrew@lunn.ch>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

These are logically MDIO operations, not phy operations, so move them
into the mdio header.
Signed-off-by: NAndrew Lunn <andrew@lunn.ch>
Reviewed-by: NFlorian Fainelli <f.fainelli@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Within phy.h, an address on an MII bus has been called both addr and
phy_id. phy_id is particularly confusion, since it also means the ID
found in register 3, if the device on the bus is a phy. Consistently
use addr.
Signed-off-by: NAndrew Lunn <andrew@lunn.ch>
Reviewed-by: NFlorian Fainelli <f.fainelli@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Pull networking fixes from David Miller:
 "As usual, there are a couple straggler bug fixes:

   1) qlcnic_alloc_mbx_args() error returns are not checked in qlcnic
      driver.  Fix from Insu Yun.

   2) SKB refcounting bug in connector, from Florian Westphal.

   3) vrf_get_saddr() has to propagate fib_lookup() errors to it's
      callers, from David Ahern.

   4) Fix AF_UNIX splice/bind deadlock, from Rainer Weikusat.

   5) qdisc_rcu_free() fails to free the per-cpu qstats.  Fix from John
      Fastabend.

   6) vmxnet3 driver passes wrong page to dma_map_page(), fix from
     Shrikrishna Khare.

   7) Don't allow zero cwnd in tcp_cwnd_reduction(), from Yuchung Cheng"

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net:
  tcp: fix zero cwnd in tcp_cwnd_reduction
  Driver: Vmxnet3: Fix regression caused by 5738a09d
  net: qmi_wwan: Add WeTelecom-WPD600N
  mkiss: fix scribble on freed memory
  net: possible use after free in dst_release
  net: sched: fix missing free per cpu on qstats
  ARM: net: bpf: fix zero right shift
  6pack: fix free memory scribbles
  net: filter: make JITs zero A for SKF_AD_ALU_XOR_X
  bridge: Only call /sbin/bridge-stp for the initial network namespace
  af_unix: Fix splice-bind deadlock
  net: Propagate lookup failure in l3mdev_get_saddr to caller
  r8152: add reset_resume function
  connector: bump skb->users before callback invocation
  cxgb4: correctly handling failed allocation
  qlcnic: correctly handle qlcnic_alloc_mbx_args

Patch 3759824d ("tcp: PRR uses CRB mode by default and SS mode
conditionally") introduced a bug that cwnd may become 0 when both
inflight and sndcnt are 0 (cwnd = inflight + sndcnt). This may lead
to a div-by-zero if the connection starts another cwnd reduction
phase by setting tp->prior_cwnd to the current cwnd (0) in
tcp_init_cwnd_reduction().

To prevent this we skip PRR operation when nothing is acked or
sacked. Then cwnd must be positive in all cases as long as ssthresh
is positive:

1) The proportional reduction mode
   inflight > ssthresh > 0

2) The reduction bound mode
  a) inflight == ssthresh > 0

  b) inflight < ssthresh
     sndcnt > 0 since newly_acked_sacked > 0 and inflight < ssthresh

Therefore in all cases inflight and sndcnt can not both be 0.
We check invalid tp->prior_cwnd to avoid potential div0 bugs.

In reality this bug is triggered only with a sequence of less common
events.  For example, the connection is terminating an ECN-triggered
cwnd reduction with an inflight 0, then it receives reordered/old
ACKs or DSACKs from prior transmission (which acks nothing). Or the
connection is in fast recovery stage that marks everything lost,
but fails to retransmit due to local issues, then receives data
packets from other end which acks nothing.

Fixes: 3759824d ("tcp: PRR uses CRB mode by default and SS mode conditionally")
Reported-by: NOleksandr Natalenko <oleksandr@natalenko.name>
Signed-off-by: NYuchung Cheng <ycheng@google.com>
Signed-off-by: NNeal Cardwell <ncardwell@google.com>
Signed-off-by: NEric Dumazet <edumazet@google.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

A repeating pattern in drivers has become to use OF node information
and, if not found, platform specific host information to extract the
ethernet address for a given device.

Currently this is done with a call to of_get_mac_address() and then
some ifdef'd stuff for SPARC.

Consolidate this into a portable routine, and provide the
arch_get_platform_mac_address() weak function hook for all
architectures to implement if they want.
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Reported-by: NBingkuo Liu <bingkuol@vmware.com>
Signed-off-by: NShrikrishna Khare <skhare@vmware.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

TX fast path uses ndo_start_xmit(), ndo_features_check() and
ndo_select_queue().

Move ndo_features_check() close to ndo_start_xmit() to increase
data locality.

All "struct net_device_ops" should now be using C99 initializers.
Signed-off-by: NEric Dumazet <edumazet@google.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>