Remove an erroneous kfree, and unlink the pcidev_info struct from the
pcidev_info list prior to free'ing the pcidev_info struct.
Signed-off-by: NPrarit Bhargava <prarit@sgi.com>
Signed-off-by: NTony Luck <tony.luck@intel.com>

Maintenance patch:
 - Add missing __init calls
 - Do not zero initialize global variables
 - No need to typecast function call returns to void
 - Some formatting
Signed-off-by: NJes Sorensen <jes@sgi.com>
Signed-off-by: NTony Luck <tony.luck@intel.com>

Temporary patch to make pci_enable_msi() fail gracefully on altix.  Will be
removed after 2.6.16 releases and the msi abstraction patches start flowing.
Signed-off-by: NMark Maule <maule@sgi.com>
Signed-off-by: NTony Luck <tony.luck@intel.com>

Introduce PRF_DEVICE_FLUSH_LIST flag for older PROMs.
Signed-off-by: NPrarit Bhargava <prarit@sgi.com>
Signed-off-by: NTony Luck <tony.luck@intel.com>

Work-around to temporarily support older PROMs with new flush device code.

This code allows systems running older PROMs to continue to run on the new
kernel base until a new official PROM is released.
Signed-off-by: NPrarit Bhargava <prarit@sgi.com>
Acked-by: NJes Sorensen <jes@sgi.com>
Signed-off-by: NTony Luck <tony.luck@intel.com>

Replace uintX_t declarations with uX declarations.
Replace intX_t declarations with sX declarations.
Signed-off-by: NPrarit Bhargava <prarit@sgi.com>
Signed-off-by: NTony Luck <tony.luck@intel.com>

This patch separates the sn_flush_device_list struct into kernel and
common (both kernel and PROM accessible) structures.  As it was, if the
size of a spinlock_t changed (due to additional CONFIG options, etc.) the
sal call which populated the sn_flush_device_list structs would erroneously
write data (and cause memory corruption and/or a panic).

This patch does the following:

1.  Removes sn_flush_device_list and adds sn_flush_device_common and
sn_flush_device_kernel.

2.  Adds a new SAL call to populate a sn_flush_device_common struct per
device, not per widget as previously done.

3.  Correctly initializes each device's sn_flush_device_kernel spinlock_t
struct (before it was only doing each widget's first device).
Signed-off-by: NPrarit Bhargava <prarit@sgi.com>
Signed-off-by: NTony Luck <tony.luck@intel.com>

Altix only patch to add fixup code that sets up
pci_controller->window. This code is a temporary
fix until ACPI support on Altix is added.

Also, corrects the usage of pci_dev->sysdata,
which had previously been used to reference
platform specific device info, to now point to
a pci_controller struct.
Signed-off-by: NJohn Keller <jpk@sgi.com>
Signed-off-by: NTony Luck <tony.luck@intel.com>

Conversion from kcalloc(1, to kzalloc.
Signed-off-by: NPanagiotis Issaris <takis@issaris.org>
Signed-off-by: NTony Luck <tony.luck@intel.com>

Some of the SN code & #defines related to compact nodes & IO discovery
have gotten stale over the years. This patch attempts to clean them up.
Some of the various SN MAX_xxx #defines were also unclear & misused.

The primary changes are:

	- use MAX_NUMNODES. This is the generic linux #define for the number
	  of nodes that are known to the generic kernel. Arrays & loops
	  for constructs that are 1:1 with linux-defined nodes should
	  use the linux #define - not an SN equivalent.

	- use MAX_COMPACT_NODES for MAX_NUMNODES + NUM_TIOS. This is the
	  number of nodes in the SSI system. Compact nodes are a hack to
	  get around the IA64 architectural limit of 256 nodes. Large SGI
	  systems have more than 256 nodes. When we upgrade to ACPI3.0,
	  I _hope_ that all nodes will be real nodes that are known to
	  the generic kernel. That will allow us to delete the notion
	  of "compact nodes".

	- add MAX_NUMALINK_NODES for the total number of nodes that
	  are in the numalink domain - all partitions.

	- simplified (understandable) scan_for_ionodes()

	- small amount of cleanup related to cnodes
Signed-off-by: NJack Steiner <steiner@sgi.com>
Signed-off-by: NTony Luck <tony.luck@intel.com>

This patch converts kcalloc(1, ...) calls to use the new kzalloc() function.
Signed-off-by: NPekka Enberg <penberg@cs.helsinki.fi>
Cc: "Luck, Tony" <tony.luck@intel.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Some IA64 spinlocks are not being initialized, make it so.
Signed-off-by: NKeith Owens <kaos@sgi.com>
Signed-off-by: NTony Luck <tony.luck@intel.com>

The main issue is that bus_fixup calls may potentially call
functions that require a valid bus->sysdata pointer.  Since
this is the case, we must set the bus->sysdata pointer before
calling the bus_fixup functions.  The remaining changes are
simple fixes to make sure memory is cleaned up in the function.
Signed-off-by: NPrarit Bhargava <prarit@sgi.com>
Signed-off-by: NTony Luck <tony.luck@intel.com>

Altix patch to add an SN pci provider for TIOCE, which is SGI's 
PCI Express implementation.
Signed-off-by: NMark Maule <maule@sgi.com>
Signed-off-by: NTony Luck <tony.luck@intel.com>

This patch enables PCI Domain numbering on Altix.
Signed-off-by: NColin Ngam <cngam@sgi.com>
Signed-off-by: NTony Luck <tony.luck@intel.com>

The Altix subarch does not provide node information via ACPI. Instead hooks
are used to fixup pci structures. This patch determines the nodes for Altix
PCI busses.

Remote Bridges:
---------------
Altix supports remote I/O nodes without memory or processors but with bridges.
The TIOCA type of bridge is an AGP bridge and the PROM provides information
about the closest node. That information will be returned by pcibus_to_node.

The TIOCP remote bridge type is a PCI bridge but the PROM does not provide a
closest node id. pcibus_to_node will return -1 for devices on those bridges
meaning that device control structures may be allocated on any node.

Safeguard:
----------
Should the fixups result in invalid node information for a pci controller then
a warning will be printed and pcibus_to_node will return -1.


This patch also fixes the "FIXME" in sn_dma_alloc_coherent. This means that
dma_alloc_coherent will now use alloc_pages_node to allocate memory local to
the node that the PCI device is connected to.
Signed-off-by: NChristoph Lameter <clameter@sgi.com>
Signed-off-by: NTony Luck <tony.luck@intel.com>

This patch is the SGI hotplug driver and additional changes required for
the driver.  These modifications include changes to the SN io_init.c code
for memory management, the inclusion of new SAL calls to enable and disable
PCI slots, and a hotplug-style driver.
Signed-off-by: NPrarit Bhargava <prarit@sgi.com>
Signed-off-by: NTony Luck <tony.luck@intel.com>

This patch moves header files out of the arch/ia64/sn directories and into
include/asm-ia64/sn.  These files were being included by other subsystems
and should be under include/asm-ia64/sn.
Signed-off-by: NPrarit Bhargava <prarit@sgi.com>
Signed-off-by: NTony Luck <tony.luck@intel.com>

This patch  fixes the SN IRQ code such that cpu affinity and
Hotplug can modify IRQ values.  The sn_irq_info structures are now locked
using a RCU lock mechanism to avoid lock contention in the lost interrupt
WAR code.
Signed-off-by: NPrarit Bhargava <prarit@sgi.com>
Signed-off-by: NTony Luck <tony.luck@intel.com>

This patch changes some macros that are used when running kernel on the
SGI simulator.
Signed-off-by: NJack Steiner <steiner@sgi.com>
Signed-off-by: NTony Luck <tony.luck@intel.com>

The following patch ensures that the correct error interrupt handling 
routine is initialized.  This patch is based on the 2.6.12 ia64 release tree.
Signed-off-by: NColin Ngam <cngam@sgi.com>
Signed-off-by: NTony Luck <tony.luck@intel.com>

Provide a driver for the altix TIOCA AGP chipset.  An agpgart backend will
be provided as a separate patch.
Signed-off-by: NMark Maule <maule@sgi.com>
Signed-off-by: NTony Luck <tony.luck@intel.com>

Move a couple of headers out of arch/ia64/sn/include/pci and into
include/asm-ia64/sn.
Signed-off-by: NMark Maule <maule@sgi.com>
Signed-off-by: NTony Luck <tony.luck@intel.com>

Provide an abstraction of the altix pci dma runtime layer so that multiple
pci-based bridges can be supported.
Signed-off-by: NMark Maule <maule@sgi.com>
Signed-off-by: NTony Luck <tony.luck@intel.com>

Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!