- 24 10月, 2011 5 次提交
-
-
由 Eric Dumazet 提交于
There is a long standing bug in linux tcp stack, about ACK messages sent on behalf of TIME_WAIT sockets. In the IP header of the ACK message, we choose to reflect TOS field of incoming message, and this might break some setups. Example of things that were broken : - Routing using TOS as a selector - Firewalls - Trafic classification / shaping We now remember in timewait structure the inet tos field and use it in ACK generation, and route lookup. Notes : - We still reflect incoming TOS in RST messages. - We could extend MuraliRaja Muniraju patch to report TOS value in netlink messages for TIME_WAIT sockets. - A patch is needed for IPv6 Signed-off-by: NEric Dumazet <eric.dumazet@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Eric Dumazet 提交于
Now tcp_md5_hash_header() has a const tcphdr argument, we can add more const attributes to callers. Signed-off-by: NEric Dumazet <eric.dumazet@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Rick Jones 提交于
Add support for reporting ring sizes via ethtool -g to the virtio_net driver. Signed-off-by: NRick Jones <rick.jones2@hp.com> Acked-by: NRusty Russell <rusty@rustcorp.com.au> Acked-by: NMichael S. Tsirkin <mst@redhat.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Eric Dumazet 提交于
tcp_md5_hash_header() writes into skb header a temporary zero value, this might confuse other users of this area. Since tcphdr is small (20 bytes), copy it in a temporary variable and make the change in the copy. Signed-off-by: NEric Dumazet <eric.dumazet@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
- 22 10月, 2011 3 次提交
-
-
由 Eric W. Biederman 提交于
When I made class_attr_bonding_matters per network namespace and dynamically allocated I overlooked the need for calling sysfs_attr_init. Oops. This fixes the following lockdep splat: [ 5.749651] bonding: Ethernet Channel Bonding Driver: v3.7.1 (April 27, 2011) [ 5.749655] bonding: MII link monitoring set to 100 ms [ 5.749676] BUG: key f49a831c not in .data! [ 5.749677] ------------[ cut here ]------------ [ 5.749752] WARNING: at kernel/lockdep.c:2897 lockdep_init_map+0x1c3/0x460() [ 5.749809] Hardware name: ProLiant BL460c G1 [ 5.749862] Modules linked in: bonding(+) [ 5.749978] Pid: 3177, comm: modprobe Not tainted 3.1.0-rc9-02177-gf2d1a4e-dirty #1157 [ 5.750066] Call Trace: [ 5.750120] [<c1352c2f>] ? printk+0x18/0x21 [ 5.750176] [<c103112d>] warn_slowpath_common+0x6d/0xa0 [ 5.750231] [<c1060133>] ? lockdep_init_map+0x1c3/0x460 [ 5.750287] [<c1060133>] ? lockdep_init_map+0x1c3/0x460 [ 5.750342] [<c103117d>] warn_slowpath_null+0x1d/0x20 [ 5.750398] [<c1060133>] lockdep_init_map+0x1c3/0x460 [ 5.750453] [<c1355ddd>] ? _raw_spin_unlock+0x1d/0x20 [ 5.750510] [<c11255c8>] ? sysfs_new_dirent+0x68/0x110 [ 5.750565] [<c1124d4b>] sysfs_add_file_mode+0x8b/0xe0 [ 5.750621] [<c1124db3>] sysfs_add_file+0x13/0x20 [ 5.750675] [<c1124e7c>] sysfs_create_file+0x1c/0x20 [ 5.750737] [<c1208f09>] class_create_file+0x19/0x20 [ 5.750794] [<c12c186f>] netdev_class_create_file+0xf/0x20 [ 5.750853] [<f85deaf4>] bond_create_sysfs+0x44/0x90 [bonding] [ 5.750911] [<f8410947>] ? bond_create_proc_dir+0x1e/0x3e [bonding] [ 5.750970] [<f841007e>] bond_net_init+0x7e/0x87 [bonding] [ 5.751026] [<f8410000>] ? 0xf840ffff [ 5.751080] [<c12abc7a>] ops_init.clone.4+0xba/0x100 [ 5.751135] [<c12abdb2>] ? register_pernet_subsys+0x12/0x30 [ 5.751191] [<c12abd03>] register_pernet_operations.clone.3+0x43/0x80 [ 5.751249] [<c12abdb9>] register_pernet_subsys+0x19/0x30 [ 5.751306] [<f84108b9>] bonding_init+0x832/0x8a2 [bonding] [ 5.751363] [<c10011f0>] do_one_initcall+0x30/0x160 [ 5.751420] [<f8410087>] ? bond_net_init+0x87/0x87 [bonding] [ 5.751477] [<c106d5cf>] sys_init_module+0xef/0x1890 [ 5.751533] [<c1356490>] sysenter_do_call+0x12/0x36 [ 5.751588] ---[ end trace 89f492d83a7f5006 ]--- Signed-off-by: NEric W. Biederman <ebiederm@xmission.com> Reported-by: NEric Dumazet <eric.dumazet@gmail.com> Tested-by: NEric Dumazet <eric.dumazet@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Eric Dumazet 提交于
INET_ECN_encapsulate() is better understood if we can read the official statement. Signed-off-by: NEric Dumazet <eric.dumazet@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Maciej Żenczykowski 提交于
Signed-off-by: NMaciej Żenczykowski <maze@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 21 10月, 2011 28 次提交
-
-
由 Carolyn Wyborny 提交于
Due to a hardware problem, writes to the VFTA register can theoretically fail. Although the likelihood of this is very low. This patch adds a shadow vfta in the adapter struct for reading and adds new write functions for these devices to work around the problem. Signed-off-by: NCarolyn Wyborny <carolyn.wyborny@intel.com> Tested-by: NAaron Brown <aaron.f.brown@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Carolyn Wyborny 提交于
This patch moves the DMA Coalescing feature initialization code from igb_reset to a new function and replaces it with a call to the new function. Signed-off-by: NCarolyn Wyborny <carolyn.wyborny@intel.com> Tested-by: NAaron Brown <aaron.f.brown@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Carolyn Wyborny 提交于
In 82580 and later devices, the alternate MAC address feature is completely handled by the option ROM and software does not handle it anymore. This patch changes the check_alt_mac_addr function to exit immediately if device is 82580 or later. Signed-off-by: NCarolyn Wyborny <carolyn.wyborny@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Williams, Mitch A 提交于
Signed-off-by: NMitch Williams <mitch.a.williams@intel.com> Tested-by: NSibai Li <sibai.li@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Williams, Mitch A 提交于
Update adapter identification strings to properly indicate i350 VF devices in the VF driver. Change the driver ID string to remove 82576-specific wording. Update copyright date. Signed-off-by: NMitch Williams <mitch.a.williams@intel.com> Tested-by: NSibai Li <sibai.li@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Eric Dumazet 提交于
Adding const qualifiers to pointers can ease code review, and spot some bugs. It might allow compiler to optimize code further. For example, is it legal to temporary write a null cksum into tcphdr in tcp_md5_hash_header() ? I am afraid a sniffer could catch the temporary null value... Signed-off-by: NEric Dumazet <eric.dumazet@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Mihai Maruseac 提交于
Instead of using the dev->next chain and trying to resync at each call to dev_seq_start, use the name hash, keeping the bucket and the offset in seq->private field. Tests revealed the following results for ifconfig > /dev/null * 1000 interfaces: * 0.114s without patch * 0.089s with patch * 3000 interfaces: * 0.489s without patch * 0.110s with patch * 5000 interfaces: * 1.363s without patch * 0.250s with patch * 128000 interfaces (other setup): * ~100s without patch * ~30s with patch Signed-off-by: NMihai Maruseac <mmaruseac@ixiacom.com> Signed-off-by: NEric Dumazet <eric.dumazet@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Eric W. Biederman 提交于
On systems that create and delete lots of dynamic devices the 31bit linux ifindex fails to fit in the 16bit macvtap minor, resulting in unusable macvtap devices. I have systems running automated tests that that hit this condition in just a few days. Use a linux idr allocator to track which mavtap minor numbers are available and and to track the association between macvtap minor numbers and macvtap network devices. Remove the unnecessary unneccessary check to see if the network device we have found is indeed a macvtap device. With macvtap specific data structures it is impossible to find any other kind of networking device. Increase the macvtap minor range from 65536 to the full 20 bits that is supported by linux device numbers. It doesn't solve the original problem but there is no penalty for a larger minor device range. Signed-off-by: NEric W. Biederman <ebiederm@xmission.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Eric W. Biederman 提交于
Place macvlan_common_newlink at the end of macvtap_newlink because failing in newlink after registering your network device is not supported. Move device_create into a netdevice creation notifier. The network device notifier is the only hook that is called after the network device has been registered with the device layer and before register_network_device returns success. Signed-off-by: NEric W. Biederman <ebiederm@xmission.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Eric W. Biederman 提交于
To avoid leaking packets in the receive queue. Add a socket destructor that will run whenever destroy a macvtap socket. Signed-off-by: NEric W. Biederman <ebiederm@xmission.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Eric W. Biederman 提交于
To see if it is appropriate to enable the macvtap zero copy feature don't test the lowerdev network device flags. Instead test the macvtap network device flags which are a direct copy of the lowerdev flags. This is important because nothing holds a reference to lowerdev and on a very bad day we lowerdev could be a pointer to stale memory. Signed-off-by: NEric W. Biederman <ebiederm@xmission.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Eric W. Biederman 提交于
There is a small window in macvtap_open between looking up a networking device and calling macvtap_set_queue in which macvtap_del_queues called from macvtap_dellink. After calling macvtap_del_queues it is totally incorrect to allow macvtap_set_queue to proceed so prevent success by reporting that all of the available queues are in use. Signed-off-by: NEric W. Biederman <ebiederm@xmission.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Eric Dumazet 提交于
We must account in skb->truesize, the size of the fragments, not the used part of them. Doing this work is important to avoid unexpected OOM situations. Signed-off-by: NEric Dumazet <eric.dumazet@gmail.com> CC: Rusty Russell <rusty@rustcorp.com.au> CC: "Michael S. Tsirkin" <mst@redhat.com> CC: virtualization@lists.linux-foundation.org CC: Krishna Kumar <krkumar2@in.ibm.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Eric Dumazet 提交于
bnx2x allocates a full page per fragment. We must account in skb->truesize, the size of the fragment, not the used part of it. Signed-off-by: NEric Dumazet <eric.dumazet@gmail.com> CC: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Ian Campbell 提交于
I've split this bit out of the skb frag destructor patch since it helps enforce the use of the fragment API. Signed-off-by: NIan Campbell <ian.campbell@citrix.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Ian Campbell 提交于
Signed-off-by: NIan Campbell <ian.campbell@citrix.com> Cc: "James E.J. Bottomley" <JBottomley@parallels.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: Mike Christie <michaelc@cs.wisc.edu> Cc: James Bottomley <James.Bottomley@suse.de> Cc: Karen Xie <kxie@chelsio.com> Cc: linux-scsi@vger.kernel.org Cc: netdev@vger.kernel.org Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Ian Campbell 提交于
Signed-off-by: NIan Campbell <ian.campbell@citrix.com> Cc: Casey Leedom <leedom@chelsio.com> Cc: netdev@vger.kernel.org Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Ian Campbell 提交于
Signed-off-by: NIan Campbell <ian.campbell@citrix.com> Cc: Dimitris Michailidis <dm@chelsio.com> Cc: netdev@vger.kernel.org Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Ian Campbell 提交于
Signed-off-by: NIan Campbell <ian.campbell@citrix.com> Cc: netdev@vger.kernel.org Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Maciej Żenczykowski 提交于
Up till now the IP{,V6}_TRANSPARENT socket options (which actually set the same bit in the socket struct) have required CAP_NET_ADMIN privileges to set or clear the option. - we make clearing the bit not require any privileges. - we allow CAP_NET_ADMIN to set the bit (as before this change) - we allow CAP_NET_RAW to set this bit, because raw sockets already pretty much effectively allow you to emulate socket transparency. Signed-off-by: NMaciej Żenczykowski <maze@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Eric Dumazet 提交于
Preliminary patch before tcp constification Signed-off-by: NEric Dumazet <eric.dumazet@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Eric Dumazet 提交于
tcp_fin() only needs socket pointer, we can remove skb and th params. Signed-off-by: NEric Dumazet <eric.dumazet@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Ricardo 提交于
This patch enables the ethtool interface. The implementation is done using the libphy helper functions. Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 RongQing Li 提交于
control these three function declarations and definitions with same macro CONFIG_PCI_IOV drivers/net/ethernet/intel/igb/igb_main.c:165: warning: ‘igb_vf_configure’ declared ‘static’ but never defined drivers/net/ethernet/intel/igb/igb_main.c:166: warning: ‘igb_find_enabled_vfs’ declared ‘static’ but never defined drivers/net/ethernet/intel/igb/igb_main.c:167: warning: ‘igb_check_vf_assignment’ declared ‘static’ but never defined Signed-off-by: NRongQing Li <roy.qing.li@gmail.com> Acked-by: NGreg Rose <gregory.v.rose@intel.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Eric Dumazet 提交于
skb->truesize must account for allocated memory, not the used part of it. Doing this work is important to avoid unexpected OOM situations. Signed-off-by: NEric Dumazet <eric.dumazet@gmail.com> CC: Jon Mason <mason@myri.com> Acked-by: NJon Mason <mason@myri.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Eric Dumazet 提交于
igbvf allocates half a page per skb fragment. We must account PAGE_SIZE/2 increments on skb->truesize, not the actual frag length. Signed-off-by: NEric Dumazet <eric.dumazet@gmail.com> CC: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Eric Dumazet 提交于
Daniel Turull reported inaccuracies in pktgen when using low packet rates, because we call ndelay(val) with values bigger than 20000. Instead of calling ndelay() for delays < 100us, we can instead loop calling ktime_now() only. Reported-by: NDaniel Turull <daniel.turull@gmail.com> Signed-off-by: NEric Dumazet <eric.dumazet@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Eric Dumazet 提交于
Since commit 356f0398 (TCP: increase default initial receive window.), we allow sender to send 10 (TCP_DEFAULT_INIT_RCVWND) segments. Change tcp_fixup_rcvbuf() to reflect this change, even if no real change is expected, since sysctl_tcp_rmem[1] = 87380 and this value is bigger than tcp_fixup_rcvbuf() computed rcvmem (~23720) Note: Since commit 356f0398 limited default window to maximum of 10*1460 and 2*MSS, we use same heuristic in this patch. Signed-off-by: NEric Dumazet <eric.dumazet@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 20 10月, 2011 4 次提交
-
-
由 Ian Campbell 提交于
A few network drivers currently use skb_frag_struct for this purpose but I have patches which add additional fields and semantics there which these other uses do not want. A structure for reference sub-page regions seems like a generally useful thing so do so instead of adding a network subsystem specific structure. Signed-off-by: NIan Campbell <ian.campbell@citrix.com> Acked-by: NJens Axboe <jaxboe@fusionio.com> Acked-by: NDavid Rientjes <rientjes@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Eric Dumazet 提交于
skb->truesize must account for allocated memory, not the used part of it. Doing this work is important to avoid unexpected OOM situations. Signed-off-by: NEric Dumazet <eric.dumazet@gmail.com> CC: Yevgeny Petrilin <yevgenyp@mellanox.co.il> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Krishna Kumar 提交于
Remove manual initialization in set_skb_frag, and instead use __skb_fill_page_desc() to do the same. Patch tested on net-next. Signed-off-by: NKrishna Kumar <krkumar2@in.ibm.com> Acked-by: NEric Dumazet <eric.dumazet@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Ian Campbell 提交于
I audited all of the callers in the tree and only one of them (pktgen) expects it to do so. Taking this reference is pretty obviously confusing and error prone. In particular I looked at the following commits which switched callers of (__)skb_frag_set_page to the skb paged fragment api: 6a930b9f cxgb3: convert to SKB paged frag API. 5dc3e196 myri10ge: convert to SKB paged frag API. 0e0634d2 vmxnet3: convert to SKB paged frag API. 86ee8130 virtionet: convert to SKB paged frag API. 4a22c4c9 sfc: convert to SKB paged frag API. 18324d69 cassini: convert to SKB paged frag API. b061b39e benet: convert to SKB paged frag API. b7b6a688 bnx2: convert to SKB paged frag API. 804cf14e net: xfrm: convert to SKB frag APIs ea2ab693 net: convert core to skb paged frag APIs Signed-off-by: NIan Campbell <ian.campbell@citrix.com> Acked-by: NEric Dumazet <eric.dumazet@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-