Merge tag 'dt-for-v3.18' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into next/dt

Merge "omap dts changes for v3.18 merge window" from Tony Lindgren:

Changes for .dts files for omaps for v3.18 merge window:

- Updates for gta04 to add gta04a3 model
- Add support for Tehnexion TAO3530 boards
- Regulator names for beaglebone
- Pinctrl related updates for omap5, dra7 and am437
- Model name fix for sbc-t54
- Enable mailbox for various omaps

* tag 'dt-for-v3.18' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: (291 commits)
  ARM: dts: OMAP2+: Add sub mailboxes device node information
  ARM: dts: dra7-evm: Mark uart1 rxd as wakeup capable
  ARM: dts: OMAP5 / DRA7: switch over to interrupts-extended property for UART
  ARM: dts: AM437x: switch to compatible pinctrl
  ARM: dts: DRA7: switch to compatible pinctrl
  ARM: dts: OMAP5: switch to compatible pinctrl
  ARM: dts: am335x-boneblack: Add names for remaining regulators
  ARM: dts: sbc-t54: fix model property
  ARM: dts: omap5.dtsi: add DSS RFBI node
  ARM: dts: omap3: Add HEAD acoustics omap3-ha.dts and omap3-ha-lcd.dts (TAO3530 based)
  ARM: dts: omap3: Add Technexion Thunder support (TAO3530 SOM based)
  ARM: dts: omap3: Add Technexion TAO3530 SOM omap3-tao3530.dtsi
  ARM: OMAP2+: tao3530: Add pdata-quirk for the mmc2 internal clock
  ARM: OMAP2+: board-generic: add support for AM57xx family
  ARM: dts: dra72-evm: Add tps65917 PMIC node
  ARM: dts: dra72-evm: Enable I2C1 node
  Linux 3.17-rc3
  unicore32: Fix build error
  vexpress/spc: fix a build warning on array bounds
  spi: sh-msiof: Fix transmit-only DMA transfers
  ...
Signed-off-by: NOlof Johansson <olof@lixom.net>

The sub-mailbox devices are added to the Mailbox DT nodes on
OMAP2420, OMAP2430, OMAP3, AM33xx, AM43xx, OMAP4 and OMAP5
family of SoCs. This data represents the same mailboxes that
used to be represented in hwmod attribute data previously.
The node name is chosen based on the .name field of
omap_mbox_dev_info structure used in the hwmod data.

Cc: "Benoît Cousson" <bcousson@baylibre.com>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: Pawel Moll <pawel.moll@arm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Ian Campbell <ijc+devicetree@hellion.org.uk>
Cc: Kumar Gala <galak@codeaurora.org>
Signed-off-by: NSuman Anna <s-anna@ti.com>
Signed-off-by: NTony Lindgren <tony@atomide.com>

Merge tag 'renesas-dt4-for-v3.18' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into next/dt

Pull "Fourth Round of Renesas ARM Based SoC DT Updates for v3.18" from Simon Horman:

* Add r8a7794 SoC and Alt board device tree
* Correct lager memory map
Signed-off-by: NArnd Bergmann <arnd@arndb.de>

* tag 'renesas-dt4-for-v3.18' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas:
  ARM: shmobile: Initial Alt board device tree
  ARM: shmobile: Initial r8a7794 SoC device tree
  ARM: shmobile: lager: correct memory map

Merge branch 'pull/v3.18/for-dt-pinctrl-updates' of https://github.com/nmenon/linux-2.6-playground into omap-for-v3.18/dt

Pull "arm: dts: Add Altera SDRAM EDAC bindings & devicetree entries" From Dinh Nguyen:

5 of the 6 patches are DTS updates and the 1 patch is updating
the MAINTAINERS entry with my new email address.
Signed-off-by: NArnd Bergmann <arnd@arndb.de>

* tag 'socfpga_update_for_v3.18' of git://git.rocketboards.org/linux-socfpga-next:
  arm: dts: Add Altera SDRAM EDAC bindings & devicetree entries.
  ARM: dts: socfpga: memreserve first 4KB for future system use
  ARM: dts: socfpga: Add SD card detect
  ARM: dts: socfpga: remove extra alias in the ArriaV devkit
  ARM: dts: socfpga: unuse the slot-node and deprecate the supports-highspeed for dw-mmc
  MAINTAINERS: update entries for ARM/SOCFPGA platform

Mark rxd as wakeupcapable for 115200n8 no hardware-flow control
configuration. If h/w flow control is being used, then rts/cts
appropriately should be used.
Signed-off-by: NNishanth Menon <nm@ti.com>

We've had deeper idle states working on omaps for few years now,
but only in the legacy mode. When booted with device tree, the
wake-up events did not have a chance to work until commit
3e6cee17 ("pinctrl: single: Add support for wake-up interrupts")
that recently got merged. In addition to that we also needed
commit 79d97015 ("of/irq: create interrupts-extended property")
that's now also merged.

Note that there's no longer need to specify the wake-up bit in
the pinctrl settings, the request_irq on the wake-up pin takes
care of that.
Signed-off-by: NNishanth Menon <nm@ti.com>

Now that ti,am437-padconf is available, switch over to that compatible
property. Retain pinctrl-single for legacy support.

While at it, mark the pinctrl as interrupt controller so that it can
be used with interrupts-extended property for wakeup events.
Signed-off-by: NNishanth Menon <nm@ti.com>

Now that ti,dra7-padconf is available, switch over to that compatible
property. Retain pinctrl-single for legacy support.

While at it, mark pinctrl as interrupt controller so that it can be used
with interrupts-extended property for wakeup events.
Signed-off-by: NNishanth Menon <nm@ti.com>

Now that ti,omap5-padconf is available, switch over to that compatible
property. Retain pinctrl-single for legacy support.

While at it, mark pinctrl as interrupt controller so that it can be
used with interrupts-extended property for wakeup events.
Signed-off-by: NNishanth Menon <nm@ti.com>

Signed-off-by: NHisashi Nakamura <hisashi.nakamura.ak@renesas.com>
[uli: reduced to minimum, added cmt, enabled scif2, split off from SoC]
Signed-off-by: NUlrich Hecht <ulrich.hecht+renesas@gmail.com>
Acked-by: NMagnus Damm <damm@opensource.se>
Signed-off-by: NSimon Horman <horms+renesas@verge.net.au>

Signed-off-by: NHisashi Nakamura <hisashi.nakamura.ak@renesas.com>
[uli: reduced to minimum, added cmt, enabled scif2, split off board part]
Signed-off-by: NUlrich Hecht <ulrich.hecht+renesas@gmail.com>
Acked-by: NMagnus Damm <damm@opensource.se>
Signed-off-by: NSimon Horman <horms+renesas@verge.net.au>

Add regulator-name properties for the regulators that don't have them,
allowing the kernel to display the name from the schematic rather than
the name of the regulator on the PMIC in order to improve diagnostics.
Signed-off-by: NMark Brown <broonie@kernel.org>
Signed-off-by: NTony Lindgren <tony@atomide.com>

CM-T54 CoM can be used with various custom baseboards, other
than SB-T54 (supplied with SBC-T54 single board computer).

Update model property of SBC-T54 DT to clarify this.
Signed-off-by: NDmitry Lifshitz <lifshitz@compulab.co.il>
Signed-off-by: NTony Lindgren <tony@atomide.com>

The RFBI node for OMAP DSS was left out when adding the rest of the DSS
nodes, because it was not clear how to set up the clocks for the RFBI.

However, it seems that if there is a HWMOD for a device, we also need a
DT node for it. Otherwise, at boot, we get:

WARNING: CPU: 0 PID: 1 at arch/arm/mach-omap2/omap_hwmod.c:2542 _init+0x464/0x4e0()
omap_hwmod: dss_rfbi: doesn't have mpu register target base

Now that v3.17-rc3 contains a fix 8fd46439 ("ARM: dts:
omap54xx-clocks: Fix the l3 and l4 clock rates") for the L3 ICLK
required by the RFBI, let's add the RFBI node to get rid of the
warning.
Signed-off-by: NTomi Valkeinen <tomi.valkeinen@ti.com>
[tony@atomide.com: updated description per comments from Nishant]
Signed-off-by: NTony Lindgren <tony@atomide.com>

These baseboards are equipped with the Technexion TAO35030 SOM. So
they include this dtsi. The common parts are extracted into an "common"
dtsi file. The main difference between both boards is, that the *lcd
has DSS support enabled for the LCD.

Some HEAD acoustics specific features are:

- LED handling
- Special FPGA/DSP audio driver (not included in this series)
- powerdown GPIO
Signed-off-by: NStefan Roese <sr@denx.de>
Cc: Thorsten Eisbein <thorsten.eisbein@head-acoustics.de>
Cc: Tapani Utriainen <tapani@technexion.com>
Cc: Tony Lindgren <tony@atomide.com>
Signed-off-by: NTony Lindgren <tony@atomide.com>

This baseboard is equipped with the Technexion TAO35030 SOM. So
includes this dtsi. Some Thunder specific features are:

- LCD panel
Signed-off-by: NStefan Roese <sr@denx.de>
Cc: Thorsten Eisbein <thorsten.eisbein@head-acoustics.de>
Cc: Tapani Utriainen <tapani@technexion.com>
Cc: Tony Lindgren <tony@atomide.com>
Signed-off-by: NTony Lindgren <tony@atomide.com>

The Technexion TAO3530 is a OMAP3530 based SOM. This patch adds the
basic support for it as an dtsi file which can be included by
baseboard equipped with this SOM. E.g. the Technexion Thunder
baseboard.
Signed-off-by: NStefan Roese <sr@denx.de>
Cc: Thorsten Eisbein <thorsten.eisbein@head-acoustics.de>
Cc: Tapani Utriainen <tapani@technexion.com>
Cc: Tony Lindgren <tony@atomide.com>
Signed-off-by: NTony Lindgren <tony@atomide.com>

Set internal clock source for MMC2 on tao3530.
Signed-off-by: NStefan Roese <sr@denx.de>
Cc: Thorsten Eisbein <thorsten.eisbein@head-acoustics.de>
Cc: Tapani Utriainen <tapani@technexion.com>
Cc: Tony Lindgren <tony@atomide.com>
Signed-off-by: NTony Lindgren <tony@atomide.com>

AM57xx processor family are variants of DRA7 family of processors and
targetted at industrial and non-automotive applications.
Signed-off-by: NNishanth Menon <nm@ti.com>
Signed-off-by: NTony Lindgren <tony@atomide.com>

DRA72x-evm uses TPS65917 PMIC. Add the node.

NOTE: LDO2 is actually unused, but the usage if any is expected to be
between 1.8 to 3.3v IO voltage. So define the node.

NOTE: Interrupt used is crossbar number based.
Tested-by: NLokesh Vutla <lokeshvutla@ti.com>
Signed-off-by: NNishanth Menon <nm@ti.com>
Signed-off-by: NKeerthy <j-keerthy@ti.com>
Tested-by: NNishanth Menon <nm@ti.com>
Signed-off-by: NTony Lindgren <tony@atomide.com>

I2C1 bus is used for the following peripherals
	P8 connector (MLB)
	TLV320AIC3106 Audio codec
	J15 LCD header
	24WC256 eeprom
	TMP102AIDRLT temperature sensor
	PCF8575 GPIO expander
	PCA9306 i2c voltage translator -> Goes to P9 for comm interface
	P2 expansion connector
	TPS65917 PMIC

The slowest speed of all the peripherals seems to be 400KHz.
Tested-by: NLokesh Vutla <lokeshvutla@ti.com>
Signed-off-by: NNishanth Menon <nm@ti.com>
Signed-off-by: NKeerthy <j-keerthy@ti.com>
Tested-by: NNishanth Menon <nm@ti.com>
Signed-off-by: NTony Lindgren <tony@atomide.com>

Merge tag 'davinci-for-v3.18/dt' of git://git.kernel.org/pub/scm/linux/kernel/git/nsekhar/linux-davinci into next/dt

Pull "DT additions for DA850" from Sekhar Nori:

Adds EDMA and audio support
Signed-off-by: NArnd Bergmann <arnd@arndb.de>

* tag 'davinci-for-v3.18/dt' of git://git.kernel.org/pub/scm/linux/kernel/git/nsekhar/linux-davinci:
  ARM: DTS: da850-evm: Enable audio via simple-card
  ARM: DTS: da850-evm: Add node for tlv320aic3106 codec
  ARM: DTS: da850-evm: Enable McASP via DT boot
  ARM: DTS: da850: Add node for McASP
  ARM: DTS: da850: Add node for edma0
  ARM: davinci: da8xx-dt: add OF_DEV_AUXDATA entry for mcasp0

Pull "Second batch of AT91 DT patches for 3.18" from Nicolas Ferre:

- 2 little fixes for at91sam9x5 and at91sam9n12ek
- removal of a board specific hook for sama5d3xek about phy fixup
  replaced with proper DT property definition.
Signed-off-by: NArnd Bergmann <arnd@arndb.de>

* tag 'at91-dt2' of git://github.com/at91linux/linux-at91:
  ARM: at91: remove phy fixup for sama5d3xek boards
  ARM: at91/dt: describe rgmii ethernet phy connected to sama5d3xek boards
  ARM: at91/dt: sam9n12ek: ohci: add port and vbus property
  ARM: at91/dt: sam9x5: fix ADC compatible string

Merge "First batch of AT91 DT material for 3.18" from Nicolas Ferre:

- RAM controller rework for multiple controller SoCs
- shutdown controller addtion
Signed-off-by: NArnd Bergmann <arnd@arndb.de>

* tag 'at91-dt' of git://github.com/at91linux/linux-at91:
  ARM: at91/dt: sama5d3: Add shutdown controller
  ARM: at91/dt: Declare a second ram controller when relevant
  ARM: at91/dt: at91sam9: use ddrck in ramc
  ARM: at91/dt: sama5d3: define mpddr clock and ramc clocks

Merge tag 'renesas-dt3-for-v3.18' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into next/dt

Merge "Third Round of Renesas ARM Based SoC DT Updates for v3.18" from Simon Horman:

* Use tabs for indentation in kzm9g-reference and r8a7779 DTS(I) files
* Add platform device tree bindings documentation
* Add SoC-specific thermal compatible property to r8a73a4 and r8a7779
Signed-off-by: NArnd Bergmann <arnd@arndb.de>

* tag 'renesas-dt3-for-v3.18' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas:
  ARM: shmobile: kzm9g-reference dts: Use tabs for indentation
  ARM: shmobile: r8a7779 dtsi: Use tabs for indentation
  ARM: shmobile: Add platform device tree bindings documentation
  ARM: shmobile: r8a73a4 dtsi: Add SoC-specific thermal compatible property
  ARM: shmobile: r8a7779 dtsi: Add SoC-specific thermal compatible property

Merge tag 'renesas-dt2-for-v3.18' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into next/dt

Merge "Second Round Of Renesas ARM Based SoC DT Updates For v3.18" from Simon Horman:

* Tidy up interrupt-parents
* Add clocks register defines for r8a7740 SoC
* Add JPU clock to r8a7791 and r8a7790 SoCs
Signed-off-by: NArnd Bergmann <arnd@arndb.de>

* tag 'renesas-dt2-for-v3.18' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas:
  ARM: shmobile: sh73a0 dtsi: Move interrupt-parent to the top
  ARM: shmobile: r8a7791 dtsi: Remove superfluous interrupt-parent
  ARM: shmobile: r8a7790 dtsi: Remove superfluous interrupt-parent
  ARM: shmobile: r8a7779 dtsi: Remove superfluous interrupt-parent
  ARM: shmobile: r8a7740: clock register bits
  ARM: shmobile: r8a7791: Add JPU clock dt and CPG define.
  ARM: shmobile: r8a7790: Add JPU clock dt and CPG define.

Merge tag 'renesas-dt-for-v3.18' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into next/dt

Merge "Renesas ARM Based SoC DT Updates for v3.18" from Simon Horman:

* Add VIN support to lager/r8a7790, koelsch/r8a7791 and henninger/r8a7791
* Enable DMA for MSIOF and QSPI on r8a7790 and r8a7791
Signed-off-by: NArnd Bergmann <arnd@arndb.de>

* tag 'renesas-dt-for-v3.18' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas:
  ARM: shmobile: lager: add VIN1/ADV7180 device nodes
  ARM: shmobile: r8a7790: add VIN device nodes
  ARM: shmobile: r8a7790 dtsi: Enable DMA for MSIOF
  ARM: shmobile: r8a7790 dtsi: Enable DMA for QSPI
  ARM: shmobile: r8a7791 dtsi: Enable DMA for MSIOF
  ARM: shmobile: r8a7791 dtsi: Enable DMA for QSPI
  ARM: shmobile: r8a7791: Add DMAC devices to DT
  ARM: shmobile: r8a7790: Add DMAC devices to DT
  ARM: shmobile: r8a7790: Add DMAC clocks to DT
  ARM: shmobile: koelsch: add VIN1/ADV7180 DT support
  ARM: shmobile: henninger: add VIN0/ADV7180 DT support
  ARM: shmobile: r8a7791: add VIN DT support

Merge tag 'v3.18-rockchip-dma' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into next/dt

Pull "rockchip dma support" from Heiko Stuebner:

Enable the AMBA bus and add necessary dma-controller dts nodes

* tag 'v3.18-rockchip-dma' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip:
  ARM: dts: rockchip: add rk3066 and rk3188 dma controllers
  ARM: dts: rockchip: add rk3288 dma controllers
  ARM: rockchip: enable the AMBA bus
Signed-off-by: NArnd Bergmann <arnd@arndb.de>

Merge tag 'v3.18-rockchip-dts1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into next/dt

Pull "First hunk of Rockchip dts changes for 3.18" from Heiko Stuebner:

- dw_mmc conversion from Jaehoon Chung
- mmc support for rk3288
- pwm + backlight for rk3288
- rtc for Radxa Rock
- saradc base nodes

* tag 'v3.18-rockchip-dts1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip:
  ARM: dts: rockchip: add saradc nodes
  ARM: dts: rockchip: add hym8563 rtc to Radxa Rock board
  ARM: dts: Enable PWM backlight on rk3288-evb
  ARM: dts: Add main PWM info to rk3288
  ARM: dts: Move the PMIC interrupt pinctrl line to rk3288-evb common
  ARM: dts: Enable emmc and sdmmc on the rk3288-evb boards
  ARM: dts: Add emmc and sdmmc to the rk3288 device tree
  ARM: dts: rockchip: unuse the slot-node and deprecate the supports-highspeed for dw-mmc
Signed-off-by: NArnd Bergmann <arnd@arndb.de>

Add the Altera SDRAM EDAC bindings and device tree changes to the Altera SoC
project.

There was a discussion thread on whether this driver should be an mfd driver
or just make use of syscon, which is already a mfd. Ultimately, the
decision to use a simple syscon interface was reached.[1]

[1] https://lkml.org/lkml/2014/7/30/514Signed-off-by: NThor Thayer <tthayer@opensource.altera.com>
Acked-by: NPavel Machek <pavel@denx.de>
[dinguyen] cleaned-up commit header and remove version history.
Signed-off-by: NDinh Nguyen <dinguyen@opensource.altera.com>

This patch adds a /memreserve/ section to reserve the first 4K for future
use by the system. One possible use-case is trampoline code used to bring
secondary cores online.
Signed-off-by: NDinh Nguyen <dinguyen@opensource.altera.com>
Acked-by: NPavel Machek <pavel@denx.de>
---
v3: Update commit message based on Mark Rutland's comment
v2: Add a comment in the dts files

Revision D of the SOCFGPA devkit has a GPIO line used for SD/MMC card detect.
Signed-off-by: NDinh Nguyen <dinguyen@opensource.altera.com>
Acked-by: NPavel Machek <pavel@denx.de>

commit [2755e187 dts: socfpga: Add DTS entry for adding the stmmac glue
layer for stmmac.] added an extra ethernet alias in the ArriaV devkit
board file. This patch removes it.
Signed-off-by: NDinh Nguyen <dinguyen@opensource.altera.com>

dw-mmc

dw-mmc controller can support multiple slots.
But, there are no use-cases anywhere. So we don't need to support the
slot-node for dw-mmc controller.
And "supports-highspeed" property in dw-mmc is deprecated.
"supports-highspeed" property can be replaced with "cap-sd/mmc-highspeed".
Signed-off-by: NJaehoon Chung <jh80.chung@samsung.com>
Reviewed-by: NTushar Behera <trblinux@gmail.com>
Reviewed-by: NUlf Hansson <ulf.hansson@linaro.org>
Acked-by: NSeungwon Jeon <tgih.jun@samsung.com>
Signed-off-by: NDinh Nguyen <dinguyen@altera.com>

The base address of the second memory region on the lager
board is 0x140000000. Update the tag used in the dts file accordingly.

This is a documentation fix and should have no run-time affect.

This problem was introduced when the second memory region
was added to the lager dts file by 62bc32a2
("ARM: shmobile: Include all 4 GiB of memory on Lager)"
in v3.14.
Reported-by: NNAOYA SHIIBA <naoya.shiiba.nx@renesas.com>
Signed-off-by: NSimon Horman <horms+renesas@verge.net.au>

Merge the gta04 related changes that were too late for v3.17

Add both the cpu and peripheral pl330 dma controllers present in rk3188 socs.
The first dma controller can change between secure and non-secure mode. Both
instances are added but the non-secure variant is left disabled by default,
as on the majority of boards the bootloader leaves it in secure mode.
Signed-off-by: NHeiko Stuebner <heiko@sntech.de>

Add both the bus and peripheral pl330 dma controllers present in rk3288 socs.
The first dma controller can change between secure and non-secure mode. Both
instances are added but the non-secure variant is left disabled by default,
as on the majority of boards the bootloader leaves it in secure mode.
Signed-off-by: NHeiko Stuebner <heiko@sntech.de>
Tested-by: NKever Yang <kever.yang@rock-chips.com>

This is needed to access the pl330 dma controllers on Rockchip SoCs.
Signed-off-by: NHeiko Stuebner <heiko@sntech.de>
Reviewed-by: NDoug Anderson <dianders@chromium.org>
Tested-by: NKever Yang <kever.yang@rock-chips.com>