As a preparation for the removal of the big kernel
lock in the block layer, this removes the BKL
from the common ioctl handling code, moving it
into every single driver still using it.
Signed-off-by: NArnd Bergmann <arnd@arndb.de>
Acked-by: NChristoph Hellwig <hch@infradead.org>
Signed-off-by: NJens Axboe <jaxboe@fusionio.com>

This fixes the ioctl function of the i2o_block driver, which
has multiple problems:

* The BLKI2OSRSTRAT and BLKI2OSWSTRAT commands always return
  -ENOTTY on success, where they should return 0.
* Support for 32 bit compat is missing
* The driver should use the .ioctl function and because
  .locked_ioctl is going away.

The use of the big kernel lock remains for now, but gets
made explictit in the ioctl function.
Signed-off-by: NArnd Bergmann <arnd@arndb.de>
Signed-off-by: NJens Axboe <jaxboe@fusionio.com>

We leak a page allocated for discard on some error conditions
(e.g. scsi_prep_state_check returns BLKPREP_DEFER in
scsi_setup_blk_pc_cmnd).

We unprep on requests that weren't prepped in the error path of
scsi_init_io. It makes the error path to clean up scsi commands messy.

Let's strictly apply the rule that we can't unprep on a request that
wasn't prepped.

Calling just scsi_put_command() in the error path of scsi_init_io() is
enough. We don't set REQ_DONTPREP yet.

scsi_setup_discard_cmnd can safely free a page on the error case with
the above rule.
Signed-off-by: NFUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Signed-off-by: NJens Axboe <jaxboe@fusionio.com>

This is for block's for-2.6.36.

We need to reset q->unprep_rq_fn in sd_remove. Otherwise we hit kernel
oops if we access to a scsi disk device via sg after removing scsi
disk module.
Signed-off-by: NFUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Signed-off-by: NJens Axboe <jaxboe@fusionio.com>

This removes q->prepare_flush_fn completely (changes the
blk_queue_ordered API).
Signed-off-by: NFUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Reviewed-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NJens Axboe <jaxboe@fusionio.com>

use REQ_FLUSH flag instead.
Signed-off-by: NFUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Acked-by: NDavid S. Miller <davem@davemloft.net>
Reviewed-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NJens Axboe <jaxboe@fusionio.com>

use REQ_FLUSH flag instead.
Signed-off-by: NFUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Reviewed-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NJens Axboe <jaxboe@fusionio.com>

use REQ_FLUSH flag instead.
Signed-off-by: NFUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Cc: Alasdair G Kergon <agk@redhat.com>
Reviewed-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NJens Axboe <jaxboe@fusionio.com>

REQ_FLUSH flag enables us to kill ps3disk_prepare_flush().
Signed-off-by: NFUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Reviewed-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NJens Axboe <jaxboe@fusionio.com>

use REQ_FLUSH flag instead.
Signed-off-by: NFUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Reviewed-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NJens Axboe <jaxboe@fusionio.com>

scsi-ml builds flush requests via q->prepare_flush_fn(), however,
builds discard requests via q->prep_rq_fn.

Using two different mechnisms for the similar requests (building
commands in SCSI ULD) doesn't make sense.

Handing both via q->prep_rq_fn makes the code design simpler.
Signed-off-by: NFUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Cc: James Bottomley <James.Bottomley@suse.de>
Reviewed-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NJens Axboe <jaxboe@fusionio.com>

- sd_done isn't called for pc request so we never call the code.
- we use sd_unprep to free discard page now.
Signed-off-by: NFUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Signed-off-by: NJens Axboe <jaxboe@fusionio.com>

This fixes discard page leak by using q->unprep_rq_fn facility.

q->unprep_rq_fn is called when all the data buffer (req->bio and
scsi_data_buffer) in the request is freed.

sd_unprep() uses rq->buffer to free discard page allocated in
sd_prepare_discard().
Signed-off-by: NFUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Signed-off-by: NJens Axboe <jaxboe@fusionio.com>

Reviewed-by: NFUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Signed-off-by: NJens Axboe <jaxboe@fusionio.com>

- add pr_fmt.

- convert printks to pr_<level>

- add if (0) and printf argument checking to cdinfo

- coalesce consecutive printks to single pr_

- fix a typo "back ground" to "background"

- convert printks without level to pr_info

- remove VIOCD_ prefixes and use pr_fmt/pr_<level>

- add a missing newline to an OS/400 message
Signed-off-by: NJoe Perches <joe@perches.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>

Folded in tab indentation fix from Andrew.
Signed-off-by: NJens Axboe <jaxboe@fusionio.com>

Fix extra brace typo that is causing build errors.
Signed-off-by: NRandy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: NJens Axboe <jaxboe@fusionio.com>

Allocating a fixed payload for discard requests always was a horrible hack,
and it's not coming to byte us when adding support for discard in DM/MD.

So change the code to leave the allocation of a payload to the lowlevel
driver.  Unfortunately that means we'll need another hack, which allows
us to update the various block layer length fields indicating that we
have a payload.  Instead of hiding this in sd.c, which we already partially
do for UNMAP support add a documented helper in the core block layer for it.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Acked-by: NMike Snitzer <snitzer@redhat.com>
Signed-off-by: NJens Axboe <jaxboe@fusionio.com>

Signed-off-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NJens Axboe <jaxboe@fusionio.com>

On compilation, gcc correctly detects that we do not handle
all types:

In function ‘blk_done’:
warning: enumeration value ‘REQ_TYPE_FS’ not handled in switch
warning: enumeration value ‘REQ_TYPE_SENSE’ not handled in switch
warning: enumeration value ‘REQ_TYPE_PM_SUSPEND’ not handled in switch
warning: enumeration value ‘REQ_TYPE_PM_RESUME’ not handled in switch
warning: enumeration value ‘REQ_TYPE_PM_SHUTDOWN’ not handled in switch
warning: enumeration value ‘REQ_TYPE_LINUX_BLOCK’ not handled in switch
warning: enumeration value ‘REQ_TYPE_ATA_TASKFILE’ not handled in switch
warning: enumeration value ‘REQ_TYPE_ATA_PC’ not handled in switch

which is a bit pointless since this is at the end of the request
processessing. Add a default case that just breaks out.
Signed-off-by: NJens Axboe <jaxboe@fusionio.com>

Remove the current bio flags and reuse the request flags for the bio, too.
This allows to more easily trace the type of I/O from the filesystem
down to the block driver.  There were two flags in the bio that were
missing in the requests:  BIO_RW_UNPLUG and BIO_RW_AHEAD.  Also I've
renamed two request flags that had a superflous RW in them.

Note that the flags are in bio.h despite having the REQ_ name - as
blkdev.h includes bio.h that is the only way to go for now.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NJens Axboe <jaxboe@fusionio.com>

Remove all the trivial wrappers for the cmd_type and cmd_flags fields in
struct requests.  This allows much easier grepping for different request
types instead of unwinding through macros.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NJens Axboe <jaxboe@fusionio.com>

We can safely remove ISA_DMA_THRESHOLD usage in aha1542. aha1542 uses
ISA_DMA_THRESHOLD to see if:

- the buffers in scatter/list are below 16MB.
- scsi_host is below 16MB.

Both checkings were added in the ancient times but aren't necessary
nowadays since we properly bounce the buffers and allocate scsi_host
below 16MB with non-zero unchecked_isa_dma.
Signed-off-by: NFUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Acked-by: NJames Bottomley <James.Bottomley@suse.de>
Signed-off-by: NJens Axboe <jaxboe@fusionio.com>

Convert assertions to use WARN().  There are several error checks in the
code for things that should never happen.  Convert them to standard
warnings so kerneloops.org will see them.
Signed-off-by: NStephen Hemminger <shemminger@vyatta.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NJens Axboe <jaxboe@fusionio.com>

Convert wait loops to use wait_event_ macros.
Signed-off-by: NStephen Hemminger <shemminger@vyatta.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NJens Axboe <jaxboe@fusionio.com>

Ioctl cmd value is unsigned, so change normalize_ioctl
Signed-off-by: NStephen Hemminger <shemminger@vyatta.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NJens Axboe <jaxboe@fusionio.com>

As reported by sparse, cmos attribute is local.
Signed-off-by: NStephen Hemminger <shemminger@vyatta.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NJens Axboe <jaxboe@fusionio.com>

The usage_count was being protected by a lock which was only there to
create an atomic counter.
Signed-off-by: NStephen Hemminger <shemminger@vyatta.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NJens Axboe <jaxboe@fusionio.com>

The first thing the floppy does is read block 0 to test geometry and to
test for disk presence.  If disk is not present this causes a console
warning message about failed I/O.  Set flag to silence.
Signed-off-by: NStephen Hemminger <shemminger@vyatta.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NJens Axboe <jaxboe@fusionio.com>

These routines are all big enough that is better to let the compiler
decide to inline or not.
Signed-off-by: NStephen Hemminger <shemminger@vyatta.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NJens Axboe <jaxboe@fusionio.com>

Set debug jiffies offset at initialization.  Avoids wierd values showing
up if debugging enabled.
Signed-off-by: NStephen Hemminger <shemminger@vyatta.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NJens Axboe <jaxboe@fusionio.com>

Change the command padding on 32-bit systems to 0 since setting it to 32
has the identical effect.
Signed-off-by: NMike Miller <mike.miller@hp.com>
Cc: Stephen M. Cameron <scameron@beardog.cce.hp.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NJens Axboe <jaxboe@fusionio.com>

Remove a debug statement left behind by accident Ths debug statement got
left behind.  It was commented out after use but not deleted.
Signed-off-by: NMike Miller <mike.miller@hp.com>
Cc: Stephen M. Cameron <scameron@beardog.cce.hp.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NJens Axboe <jaxboe@fusionio.com>

The definition of next_command also ended up in wrong place It ended up
inside an "#ifdef CONFIG_PROCFS".  Already caught by Randy Dunlap and a
couple others.  Tried to put it somewhere that made sense.
Signed-off-by: NMike Miller <mike.miller@hp.com>
Cc: Stephen M. Cameron <scameron@beardog.cce.hp.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NJens Axboe <jaxboe@fusionio.com>

call to put_controller_in_performant_mode was in the wrong place
The call inadvertently ended up in an error path.
Signed-off-by: NMike Miller <mike.miller@hp.com>
Cc: Stephen M. Cameron <scameron@beardog.cce.hp.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NJens Axboe <jaxboe@fusionio.com>

Make sure we register the performant mode interrupt Another blunder.
Seemed to work because the call to put_controller_into_performant_mode was
never called.
Signed-off-by: NMike Miller <mike.miller@hp.com>
Cc: Stephen M. Cameron <scameron@beardog.cce.hp.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NJens Axboe <jaxboe@fusionio.com>

Add support for new controllers due out next year.  HP must continue to
support new controllers in older distros.  All vendors require support be
upstream.  These controllers support only 16 commands in simple mode but
can support up to 1024 in performant mode.  See patch 5/6/ We have no
marketing names yet.
Signed-off-by: NMike Miller <mike.miller@hp.com>
Cc: Stephen M. Cameron <scameron@beardog.cce.hp.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NJens Axboe <jaxboe@fusionio.com>

Add a mode of controller operation called Performant Mode.  Even though
cciss has been deprecated in favor of hpsa there are new controllers due
out next year that HP must support in older vendor distros.  Vendors
require all fixes/features be upstream.  These new controllers support
only 16 commands in simple mode but support up to 1024 in performant mode.
This requires us to add this support at this late date.

The performant mode transport minimizes host PCI accesses by performinf
many completions per read.  PCI writes are posted so the host can write
then immediately get off the bus not waiting for the writwe to complete to
the target.  In the context of performant mode the host read out to a
controller pulls all posted writes into host memory ensuring the reply
queue is coherent.
Signed-off-by: NMike Miller <mike.miller@hp.com>
Cc: Stephen M. Cameron <scameron@beardog.cce.hp.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NJens Axboe <jaxboe@fusionio.com>

Change the return type of our interrupt access routines to bool from
unsigned long.  It makes more sense that way.
Signed-off-by: NMike Miller <mike.miller@hp.com>
Cc: Stephen M. Cameron <scameron@beardog.cce.hp.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NJens Axboe <jaxboe@fusionio.com>

Check to see if h->msi[x]_vector is set.  We need this for a following
patch.  Without this check we process one interrupt then stop because in
msi[x] mode the interrupt pending bit is not set.  Not sure why we didn't
encounter this before.
Signed-off-by: NMike Miller <mike.miller@hp.com>
Cc: Stephen M. Cameron <scameron@beardog.cce.hp.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NJens Axboe <jaxboe@fusionio.com>

Simplify the interrupt handler code to more closely match hpsa and to
hopefully make it easier to follow.
Signed-off-by: NMike Miller <mike.miller@hp.com>
Cc: Stephen M. Cameron <scameron@beardog.cce.hp.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NJens Axboe <jaxboe@fusionio.com>