No functional change, refactoring with the standard helpers.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

No functional change, refactoring with the standard helpers.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

No functional change, refactoring with the standard helpers.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

No functional change, refactoring with the standard helpers.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

No functional change, refactoring with the standard helpers.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

No functional change, refactoring with the standard helpers.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

No functional change, refactoring with the standard helpers.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

No functional change, refactoring with the standard helpers.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

No functional change, refactoring with the standard helpers.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

No functional change, refactoring with the standard helpers.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

No functional change, refactoring with the standard helpers.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Use setup_timer and mod_timer instead of structure assignments as it
is the preferred way to setup and set the timer.
Signed-off-by: NRoman Kollar <rkollar@mail.muni.cz>
Signed-off-by: NJiri Slaby <jslaby@suse.cz>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Add a driver for an embedded sound card.
Signed-off-by: NClemens Ladisch <clemens@ladisch.de>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Configure the XIO2001 bridge on PCI Express cards so that it does less
needless prefetching.
Signed-off-by: NClemens Ladisch <clemens@ladisch.de>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Make it possible for cards to have three stereo analog input pairs.
Signed-off-by: NClemens Ladisch <clemens@ladisch.de>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Cards without S/PDIF output do not need those controls.
Signed-off-by: NClemens Ladisch <clemens@ladisch.de>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

This patch fix spelling typo in hda_controller.c.
Signed-off-by: NMasanari Iida <standby24x7@gmail.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

The commit commit [33f4acd3: ALSA: hda - Enable mic mute hotkey
and LEDs for an HP machine] introduced a quirk for a HP machine
involving with the input event handling.  Although the relevant code
is protected via IS_ENABLED(CONFIG_INPUT), this doesn't suffice when
the audio driver is built in while the input is module.

As an easy workaround, this patch forcibly selects CONFIG_INPUT in
Kconfig.  This shouldn't be a practical problem since CONFIG_INPUT is
almost mandatory for all systems.  Also, this allows to remove the
ugly ifdefs in the code.

Fixes: 33f4acd3 ('ALSA: hda - Enable mic mute hotkey and LEDs for an HP machine')
Acked-by: NDavid Henningsson <david.henningsson@canonical.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Call __set_current_state() instead of assigning the new state directly.
These interfaces also aid CONFIG_DEBUG_ATOMIC_SLEEP environments, keeping
track of who changed the state.
Signed-off-by: NDavidlohr Bueso <dbueso@suse.de>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Fixes the following compilation error:

   include/sound/compress_driver.h: In function ‘snd_compr_drain_notify’:
   include/sound/compress_driver.h:177:2: error: implicit declaration of function ‘snd_BUG_ON’ [-Werror=implicit-function-declaration]
     if (snd_BUG_ON(!stream))

snd_BUG_ON() is defined in sound/core.h but the file is not included explicitly,
so include it.
Signed-off-by: NQais Yousef <qais.yousef@imgtec.com>
Acked-by: NVinod Koul <vinod.koul@intel.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Merge tag 'topic/i915-hda-componentized-2015-01-12' of git://anongit.freedesktop.org/drm-intel into for-next

Promote line6 driver from staging to sound/usb/line6 directory, and
maintain through sound subsystem tree.

This commit just moves the code and adapts Makefile / Kconfig.
The further renames and misc cleanups will follow.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Remove declarations from the header and move the definitions up in the
source so they need not be forward declared.
Signed-off-by: NChris Rorvick <chris@rorvick.com>
Reviewed-by: NStefan Hajnoczi <stefanha@gmail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Which *_disconnect() to call on disconnect is known at initialization.
Add a function pointer to the `usb_line6' struct and use to call into
the appropriate logic instead of evaluating the conditional logic.
Signed-off-by: NChris Rorvick <chris@rorvick.com>
Reviewed-by: NStefan Hajnoczi <stefanha@gmail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Which *_process_message() function (if any) to call when data is
received is known at initialization.  Add a function pointer to the
`usb_line6' struct and use to call into the appropriate logic instead
of evaluating the conditional logic for each message.
Signed-off-by: NChris Rorvick <chris@rorvick.com>
Reviewed-by: NStefan Hajnoczi <stefanha@gmail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Casting the `struct usb_line6' pointer at the call point makes the code
difficult to read.  This is substantially cleaned up by moving the cast
into the callees.
Signed-off-by: NChris Rorvick <chris@rorvick.com>
Reviewed-by: NStefan Hajnoczi <stefanha@gmail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Casting the `struct usb_line6' pointer at the call point makes the code
difficult to read.  This is substantially cleaned up by moving the cast
into the callees.
Signed-off-by: NChris Rorvick <chris@rorvick.com>
Reviewed-by: NStefan Hajnoczi <stefanha@gmail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

The device type can now be used to determine the addresses of the
audio endpoints for the interface.  Drop the conditional logic and make
these values properties.
Signed-off-by: NChris Rorvick <chris@rorvick.com>
Reviewed-by: NStefan Hajnoczi <stefanha@gmail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Commit 1027f476 (staging: line6: sync with upstream) removed PCM
from the Pocket POD capabilities but left the endpoint configuration.
Signed-off-by: NChris Rorvick <chris@rorvick.com>
Reviewed-by: NStefan Hajnoczi <stefanha@gmail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

The device type can now be used to determine the addresses of the
control endpoints for the interface.  Drop the conditional logic and
make these values properties.
Signed-off-by: NChris Rorvick <chris@rorvick.com>
Reviewed-by: NStefan Hajnoczi <stefanha@gmail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

The device type can now be used to determine the altsetting for the
interface.  Drop the conditional logic and make this value a property.
Signed-off-by: NChris Rorvick <chris@rorvick.com>
Reviewed-by: NStefan Hajnoczi <stefanha@gmail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

The driver only supports interface 0 of the TonePort UX2 and POD Studio
UX2 devices.  Use the device table to filter on this.
Signed-off-by: NChris Rorvick <chris@rorvick.com>
Reviewed-by: NStefan Hajnoczi <stefanha@gmail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

The driver only supports interface 1 of the Pocket POD.  Use the device
table to filter on this.
Signed-off-by: NChris Rorvick <chris@rorvick.com>
Reviewed-by: NStefan Hajnoczi <stefanha@gmail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

The driver uses a different altsetting depending on the interface.  Add
device type entries for each of these.
Signed-off-by: NChris Rorvick <chris@rorvick.com>
Reviewed-by: NStefan Hajnoczi <stefanha@gmail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

The PODxt Live device has both a POD and a Variax interface.  Add device
type entries for each of these.
Signed-off-by: NChris Rorvick <chris@rorvick.com>
Reviewed-by: NStefan Hajnoczi <stefanha@gmail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

The `LINE6_CAP_CTRL_PCM_HW' macro combines three capabilities to save
horizontal space when defining the properties entries.  Now that these
are no longer limited to single lines this is not such a concern.
Specify capabilities individually when defining each property for
better clarity.
Signed-off-by: NChris Rorvick <chris@rorvick.com>
Reviewed-by: NStefan Hajnoczi <stefanha@gmail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Specify the index of the properties entry explicitly to define this
structure more robustly.  Also, drop the `L6PROP' macro in favor of
initializing each member explicitly on its own line since horizontal
space is limited and more attributes will be added later.
Signed-off-by: NChris Rorvick <chris@rorvick.com>
Reviewed-by: NStefan Hajnoczi <stefanha@gmail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Including "BIT" in the macro name is pointless.  Replace with "CAP" to
provide some context for what its value represents.
Signed-off-by: NChris Rorvick <chris@rorvick.com>
Reviewed-by: NStefan Hajnoczi <stefanha@gmail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Signed-off-by: NChris Rorvick <chris@rorvick.com>
Reviewed-by: NStefan Hajnoczi <stefanha@gmail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>