- 09 1月, 2009 1 次提交
-
-
由 Mark Brown 提交于
This patch adds a jack reporting interface to ASoC. This wraps the ALSA core jack detection functionality and provides integration with DAPM to automatically update the power state of pins based on the jack state. Since embedded platforms can have multiple detecton methods used for a single jack (eg, separate microphone and headphone detection) the report function allows specification of which bits are being updated on a given report. The expected usage is that machine drivers will create jack objects and then configure jack detection methods to update that jack. Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
- 06 1月, 2009 1 次提交
-
-
由 Peter Ujfalusi 提交于
This patch introduces a new enum type. In this enum type each enumerated items referred with a value. This new enum type can handle enums encoded in bitfield, or any other weird ways. twl4030 codec has several mux selection register, where the input/output mux is coded in a bitfield. With the normal enum type this type of mux can not be handled in a clean way. Signed-off-by: NPeter Ujfalusi <peter.ujfalusi@nokia.com> Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
- 10 12月, 2008 1 次提交
-
-
由 Mark Brown 提交于
Another part of the backporting of Liam's ASoC v2 work. Using this is more complicated than the other registration types since currently the codec is instantiated during the probe of the ASoC device so we can't currently readily wait for the codec to register. Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
- 09 12月, 2008 2 次提交
-
-
由 Mark Brown 提交于
ASoC v2 allows platform drivers to instantiate independantly of the overall ASoC card. This API allows drivers to notify the core when they are registered. Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
由 Mark Brown 提交于
ASoC v2 allows cards, codecs and platforms to instantiate separately, with the overall ASoC device only being instantiated once all the required components have registered. As part of backporting Liam's work introduce an initial version of the card registration functions. At present these do nothing active and are internal only, they will be exposed to machine drivers after further backporting. Adding this now allows the datastructures used for dynamic card instantiation to be built up gradually. Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
- 04 12月, 2008 3 次提交
-
-
由 Mark Brown 提交于
The struct is never defined. Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
由 Mark Brown 提交于
None of the platforms are actually using the SoC device so remove it (only atmel actually has a suspend method). Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
由 Mark Brown 提交于
This is in preparation for the removal of struct snd_soc_device. The pop time configuration should really be a property of the card not the codec but since DAPM currently uses the codec rather than the card using the codec is fine for now. Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
- 03 12月, 2008 1 次提交
-
-
由 Mark Brown 提交于
As part of the deprecation of snd_soc_device push the registration of the platform down into the card structure. Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
- 02 12月, 2008 2 次提交
-
-
由 Mark Brown 提交于
ASoC v2 does not use the struct snd_soc_device at runtime, using struct snd_soc_card as the root of the card. Begin removing data from snd_soc_device by pushing the workqueue data into snd_soc_card, using a backpointer to the snd_soc_device to keep things going for the time being. Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
由 Mark Brown 提交于
Currently ASoC card initialisation is completed by a function called snd_soc_register_card(). As part of the work to allow independant registration of cards, codecs and machines in ASoC v2 a new function of the same name has been added so rename the existing function to facilitate the merge of v2. Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
- 25 11月, 2008 1 次提交
-
-
由 Mark Brown 提交于
DAI type information is only ever used within ASoC in order to special case AC97 and for diagnostic purposes. Since modern CPUs and codecs support multi function DAIs which can be configured for several modes it is more trouble than it's worth to maintain anything other than a flag identifying AC97 DAIs so remove the type field and replace it with an ac97_control flag. Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
- 21 11月, 2008 2 次提交
-
-
由 Mark Brown 提交于
ASoC v2 factors most of the contents of soc.h out into separate headers, including soc-dai.h for the DAI. Factor the existing DAI API out into this file in order to prepare for backporting of the ASoC v2 DAI API. Also backport some of Liam's improvements to the documentation. Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
由 Mark Brown 提交于
One of the issues with the ASoC v1 API which has been addressed in the ASoC v2 work that Liam Girdwood has done is that the ALSA card provided by ASoC is distributed around the ASoC structures. For example, machine wide data such as the struct snd_card are maintained as part of the CODEC data structure, preventing the use of multiple codecs. This has been addressed by refactoring the data structures so that all the data for the ALSA card is contained in a single structure snd_soc_card which replaces the existing snd_soc_machine and snd_soc_device. Begin the process of backporting this by renaming struct snd_soc_machine to struct snd_soc_card, better reflecting its function and bringing it closer to standard ALSA terminology. Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
- 19 11月, 2008 1 次提交
-
-
由 Mark Brown 提交于
Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
- 06 11月, 2008 1 次提交
-
-
由 Mark Brown 提交于
Rather than try to remember to keep the core version number updated (which hasn't been happening) just remove it. It was much more useful when ASoC was out of tree. Signed-off-by: NMark brown <broonie@opensource.wolfsonmicro.com>
-
- 30 10月, 2008 2 次提交
-
-
由 Troy Kisky 提交于
i.e. echo 6 59 >/sys/kernel/debug/soc-audio.0/codec_reg will set register 0x06 to a value of 0x59. Also, pop_time debugfs interface setup is moved so that it is setup in the same function as codec_reg Signed-off-by: NTroy Kisky <troy.kisky@boundarydevices.com> Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
由 Mark Brown 提交于
When ASoC was converted to support full int width masks SOC_SINGLE_VALUE() omitted the assignment of rshift, causing the control operatins to report some mono controls as stereo. This happened to work some of the time due to a confusion between shift and min in snd_soc_info_volsw(). Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 30 7月, 2008 4 次提交
-
-
由 Jon Smirl 提交于
ASOC: convert use of uint to unsigned int Signed-off-by: NJon Smirl <jonsmirl@gmail.com> Acked-by: NMark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de> Signed-off-by: NJaroslav Kysela <perex@perex.cz>
-
由 Jon Smirl 提交于
Most of the ASoC controls refer to the maximum value that can be set for a control as mask but there is no actual requirement for all bits to be set at the highest possible value making the name mask misleading. Change the code to use max instead. Signed-off-by: NJon Smirl <jonsmirl@gmail.com> Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de> Signed-off-by: NJaroslav Kysela <perex@perex.cz>
-
由 Jon Smirl 提交于
Convert bitfields in ASoC into full int width. This is a simple mechanical conversion. Two places in the DAPM code were fixed to properly use mask. Signed-off-by: NJon Smirl <jonsmirl@gmail.com> Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de> Signed-off-by: NJaroslav Kysela <perex@perex.cz>
-
由 Mark Brown 提交于
Some codecs have unusual features in their register maps such as very large registers representing arrays of coefficients. Support these codecs in the register cache sysfs file by allowing them to provide a function register_display() overriding the default output for register contents. Also ensure that we don't overflow PAGE_SIZE while writing out the register dump. Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de> Signed-off-by: NJaroslav Kysela <perex@perex.cz>
-
- 10 7月, 2008 2 次提交
-
-
由 Liam Girdwood 提交于
This patch adds several functions for DAI control and config and replaces the current method of calling function pointers within the DAI struct. Signed-off-by: NLiam Girdwood <lg@opensource.wolfsonmicro.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de> Signed-off-by: NJaroslav Kysela <perex@perex.cz>
-
由 Liam Girdwood 提交于
This patch series merges struct snd_soc_codec_dai and struct snd_soc_cpu_dai into struct snd_soc_dai in preparation for further ASoC v2 patches. This merger removes duplication in both DAI structures and simplifies the API for other users. Signed-off-by: NLiam Girdwood <lg@opensource.wolfsonmicro.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de> Signed-off-by: NJaroslav Kysela <perex@perex.cz>
-
- 16 6月, 2008 1 次提交
-
-
由 Andy Green 提交于
On OpenMoko soc-audio resume is taking 700ms of the whole resume time of 1.3s, dominated by writes to the codec over I2C. This patch shunts the resume guts into a workqueue which then is done asynchronously. The "card" is locked using the ALSA power state APIs as suggested by Mark Brown. [Added fix for race with resume to suspend and fixed a couple of nits from checkpatch -- broonie.] Signed-off-by: NAndy Green <andy@openmoko.com> Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de> Signed-off-by: NJaroslav Kysela <perex@perex.cz>
-
- 13 6月, 2008 2 次提交
-
-
由 Mike Montour 提交于
Signed-off-by: NMike Montour <mail@mmontour.net> Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de> Signed-off-by: NJaroslav Kysela <perex@perex.cz>
-
由 Mark Brown 提交于
This allows per-DAI initialisation to be done by the CPU DAI drivers. Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de> Signed-off-by: NJaroslav Kysela <perex@perex.cz>
-
- 29 5月, 2008 1 次提交
-
-
由 Mark Brown 提交于
The SOC_DOUBLE_S8_TLV control type was originally implemented in the UDA1380 driver by Philipp Zabel and was moved into the core by me. Signed-off-by: NPhilipp Zabel <philipp.zabel@gmail.com> Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 19 5月, 2008 2 次提交
-
-
由 Mark Brown 提交于
Currently the ASoC core configures the bias levels in the system using a callback on codecs and machines called 'dapm_event', passing it PCI style power levels as SNDRV_CTL_POWER_ constants. This is more obscure than it needs to be and has caused confusion to driver authors, especially given that DAPM is also performing power management. Address this by renaming the callback function to 'set_bias_level' and using constants explicitly representing the off, standby, pre-on and on states which DAPM transitions through. Also unexport the API for setting bias level: there are currently no in-tree users of this API other than the core itself and it is likely that the core would need to be extended to cater for any users. Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com> Cc: Jarkko Nikula <jarkko.nikula@nokia.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de> Signed-off-by: NJaroslav Kysela <perex@perex.cz>
-
由 Mark Brown 提交于
The CPU and codec DAI operations differ only in the presence of the digital mute operation for the codec so they may as well be the same type. Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de> Signed-off-by: NJaroslav Kysela <perex@perex.cz>
-
- 13 5月, 2008 1 次提交
-
-
由 Philipp Zabel 提交于
I suspect that snd_ctl_boolean_mono should have been snd_ctl_boolean_mono_info instead. This fixes the build for magician. Signed-off-by: NPhilipp Zabel <philipp.zabel@gmail.com> Acked-by: NMark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 01 2月, 2008 5 次提交
-
-
由 Mark Brown 提交于
Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de> Signed-off-by: NJaroslav Kysela <perex@perex.cz>
-
由 Liam Girdwood 提交于
This fixes a bug whereby PCMs were not being suspended when the rest of the audio subsystem was suspended. Signed-off-by: NLiam Girdwood <lg@opensource.wolfsonmicro.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de> Signed-off-by: NJaroslav Kysela <perex@perex.cz>
-
由 Philipp Zabel 提交于
Add TLV support to ASoC. Signed-off-by: NPhilipp Zabel <philipp.zabel@gmail.com> Signed-off-by: NLiam Girdwood <lg@opensource.wolfsonmicro.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de> Signed-off-by: NJaroslav Kysela <perex@perex.cz>
-
由 Liam Girdwood 提交于
Added a device level dapm event so that both the machine and codec are informed when dapm events occur. Signed-off-by: NLiam Girdwood <lg@opensource.wolfsonmicro.com> Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de> Signed-off-by: NJaroslav Kysela <perex@perex.cz>
-
由 Takashi Iwai 提交于
This header file exists only for some hacks to adapt alsa-driver tree. It's useless for building in the kernel. Let's move a few lines in it to sound/core.h and remove it. With this patch, sound/driver.h isn't removed but has just a single compile warning to include it. This should be really killed in future. Signed-off-by: NTakashi Iwai <tiwai@suse.de> Signed-off-by: NJaroslav Kysela <perex@perex.cz>
-
- 16 10月, 2007 1 次提交
-
-
由 Takashi Iwai 提交于
Clean up codes using the new common snd_ctl_boolean_*_info() callbacks. Signed-off-by: NTakashi Iwai <tiwai@suse.de> Signed-off-by: NJaroslav Kysela <perex@suse.cz>
-
- 16 5月, 2007 1 次提交
-
-
由 Liam Girdwood 提交于
This patch fixes a bug whereby AC97 bus device data was being clobbered when AC97 codecs using the generic ac97_codec.c driver were being registered. Codecs that didn't use the generic driver were unaffected (e.g. WM9712, WM9713). Changes:- o Add new AC97 codec class for custom (or need bus dev registration) AC97 codecs. o Only register/deregister this custom codec device with the AC97 bus. The generic AC97 driver already does this for generic codec devices. This may be related to bug #3038 :- https://bugtrack.alsa-project.org/alsa-bug/view.php?id=3038Signed-off-by: NLiam Girdwood <lg@opensource.wolfsonmicro.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de> Signed-off-by: NJaroslav Kysela <perex@suse.cz>
-
- 09 2月, 2007 2 次提交
-
-
由 Graeme Gregory 提交于
This patch updates the API's to include the new DAI configuration and clocking architecture. Changes:- o Removed DAI automatic matching and capabilities structure (struct snd_soc_dai_mode) and macros. o Added DAI operations for codec and CPU interfaces. o Removed config_sysclk() function and struct snd_soc_clock_info. No longer needed as clocking is now configured manually in the machine drivers. Also removed other clocking data from structures. o Updated version to 0.13 o Added shift to SOC_SINGLE_EXT kcontrol macro. Signed-off-by: NGraeme Gregory <gg@opensource.wolfsonmicro.com> Signed-off-by: NLiam Girdwood <lg@opensource.wolfsonmicro.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de> Signed-off-by: NJaroslav Kysela <perex@suse.cz>
-
由 Takashi Iwai 提交于
Fix the changes realted to delayed_work in soc/codecs/wm8750.c. Signed-off-by: NTakashi Iwai <tiwai@suse.de> Signed-off-by: NJaroslav Kysela <perex@suse.cz>
-