We could walk of a bad list otherwise when someone concurrently
unbinds stuff for fun.

I've suspected this as the root-cause behind seemingly inconsistent
state, but alas it's not.
Acked-by: NChris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Beignet needs these in order to program the L3 cache config for
OpenCL workloads, particularly when using SLM.
Signed-off-by: NBrad Volkin <bradley.d.volkin@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Take the minimum of the object size and the vma size and prefault
only that much. Avoids a SIGBUS when mmapping only a portion of the
object.

Prefaulting was introduced here:
 commit b90b91d8
 Author: Chris Wilson <chris@chris-wilson.co.uk>
 Date:   Tue Jun 10 12:14:40 2014 +0100

    drm/i915: Prefault the entire object on first page fault

Cc: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Testcase: igt/gem_mmap/short-mmap
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

This patch enables the framework for using MMIO based flip calls,
in contrast with the CS based flip calls which are being used currently.

MMIO based flip calls can be enabled on architectures where
Render and Blitter engines reside in different power wells. The
decision to use MMIO flips can be made based on workloads to give
100% residency for Media power well.

v2: The MMIO flips now use the interrupt driven mechanism for issuing the
flips when target seqno is reached. (Incorporating Ville's idea)

v3: Rebasing on latest code. Code restructuring after incorporating
Damien's comments

v4: Addressing Ville's review comments
    -general cleanup
    -updating only base addr instead of calling update_primary_plane
    -extending patch for gen5+ platforms

v5: Addressed Ville's review comments
    -Making mmio flip vs cs flip selection based on module parameter
    -Adding check for DRIVER_MODESET feature in notify_ring before calling
     notify mmio flip.
    -Other changes mostly in function arguments

v6: -Having a seperate function to check condition for using mmio flips (Ville)
    -propogating error code from i915_gem_check_olr (Ville)

v7: -Adding __must_check with i915_gem_check_olr (Chris)
    -Renaming mmio_flip_data to mmio_flip (Chris)
    -Rebasing on latest nightly

v8: -Rebasing on latest code
    -squash 3rd patch in series(mmio setbase vs page flip race) with this patch
    -Added new tiling mode update in intel_do_mmio_flip (Chris)

v9: -check for obj->last_write_seqno being 0 instead of obj->ring being NULL in
intel_postpone_flip, as this is a more restrictive condition (Chris)

v10: -Applied Chris's suggestions for squashing patches 2,3 into this patch.
These patches make the selection of CS vs MMIO flip at the page flip time, and
make the module parameter for using mmio flips as tristate, the states being
'force CS flips', 'force mmio flips', 'driver discretion'.
Changed the logic for driver discretion (Chris)

v11: Minor code cleanup(better readability, fixing whitespace errors, using
lockdep to check mutex locked status in postpone_flip, removal of __must_check
in function definition) (Chris)
Reviewed-by: NChris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: NSourab Gupta <sourab.gupta@intel.com>
Signed-off-by: NAkash Goel <akash.goel@intel.com>
Tested-by: Chris Wilson <chris@chris-wilson.co.uk> # snb, ivb
[danvet: Fix up parameter alignement checkpatch spotted.]
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: NRodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Staring from HSW, the resolution limit of FBC has increased to
4096*4096

Issue: VIZ-2813
Change-Id: I842f64e3cf2c0d18d29ef1bcfef3b9bb1f1764ac
Signed-off-by: NDaisy Sun <daisy.sun@intel.com>
Reviewed-by: NDamien Lespiau <damien.lespiau@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

This adds support for a write-enable bit in the entry of GTT.
This is handled via a read-only flag in the GEM buffer object which
is then used to see how to set the bit when writing the GTT entries.
Currently by default the Batch buffer & Ring buffers are marked as read only.

v2: Moved the pte override code for read-only bit to 'byt_pte_encode'. (Chris)
    Fixed the issue of leaving 'gt_old_ro' as unused. (Chris)

v3: Removed the 'gt_old_ro' field, now setting RO bit only for Ring Buffers(Daniel).

v4: Added a new 'flags' parameter to all the pte(gen6) encode & insert_entries functions,
    in lieu of overloading the cache_level enum (Daniel).

v5: Removed the superfluous VLV check & changed the definition location of PTE_READ_ONLY flag (Imre)
Reviewed-by: NImre Deak <imre.deak@intel.com>
Signed-off-by: NAkash Goel <akash.goel@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Now that the primary plane can be disabled independently of the CRTC,
the debugfs code needs to be updated to recognize when the primary plane
is disabled and not try to return information about the primary plane's
framebuffer.

This change prevents a NULL dereference when reading i915_display_info
with a disabled primary plane.

v2: Replace a seq_printf() with seq_puts() (suggested by Damien)
Signed-off-by: NMatt Roper <matthew.d.roper@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Spotted while crawling around in the area.
Reviewed-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Any comment containing "current Intel hardware supports" quickly
becomes obsolete, so remove it and let people discover the information
by looking at the function implementation.
Signed-off-by: NPaulo Zanoni <paulo.r.zanoni@intel.com>
Reviewed-by: NDamien Lespiau <damien.lespiau@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Two BSpec updates changed the recommended values for BDW eDP and DP
DDI buffer translations. Now the signal levels also match the HSW signal
levels, which simplify things a little bit.

It seems some DP sinks don't work properly without voltage level 0 and
pre-emphasis level 3, so this patch may fix some bugs on
panels/monitors that happen on BDW but not on HSW.
Signed-off-by: NPaulo Zanoni <paulo.r.zanoni@intel.com>
Reviewed-by: NDamien Lespiau <damien.lespiau@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Rewrite i915_gem_render_state.c for the purposes of clarity and
compactness, in the process we can eliminate some dodgy math that did
not handle 64bit addresses correctly.
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Damien Lespiau <damien.lespiau@intel.com>
Cc: Mika Kuoppala <mika.kuoppala@intel.com>
Reviewed-by: NMika Kuoppala <mika.kuoppala@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

An object can only have an active gtt mapping if it is currently bound
into the global gtt. Therefore we can simply walk the list of all bound
objects and check the flag upon those for an active gtt mapping.

From commit 48018a57
Author: Paulo Zanoni <paulo.r.zanoni@intel.com>
Date:   Fri Dec 13 15:22:31 2013 -0200

    drm/i915: release the GTT mmaps when going into D3

Also note that the WARN is inappropriate for this function as GPU
activity is orthogonal to GTT mmap status. Rather it is the caller that
relies upon this condition and so it should assert that the GPU is idle
itself.

References: https://bugs.freedesktop.org/show_bug.cgi?id=80081Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Cc: Paulo Zanoni <paulo.r.zanoni@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@gmail.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: NPaulo Zanoni <paulo.r.zanoni@intel.com>
Tested-by: NPaulo Zanoni <paulo.r.zanoni@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

intel_dsi_init() bails out without freeing the memory 'intel_dsi' and
'intel_connector' point to. Simply bail out before allocating memory.

Picked up by Coverity - CID 1222750.
Signed-off-by: NChristoph Jaeger <christophjaeger@linux.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Now we have the active/inactive state for exit and this actually changes the
HW enable bit the status was a bit confusing for users. So let's provide
more info.
Reviewed-by: NVijay Purushothaman <vijay.a.purushothaman@intel.com>
Signed-off-by: NRodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

The perfect solution for psr_exit is the hardware tracking the changes and
doing the psr exit by itself. This scenario works for HSW and BDW with some
environments like Gnome and Wayland.

However there are many other scenarios that this isn't true. Mainly one right
now is KDE users on HSW and BDW with PSR on. User would miss many screen
updates. For instances any key typed could be seen only when mouse cursor is
moved. So this patch introduces the ability of trigger PSR exit on kernel side
on some common cases that.

Most of the cases are coverred by psr_exit at set_domain. The remaining cases
are coverred by triggering it at set_domain, busy_ioctl, sw_finish and
mark_busy.

The downside here might be reducing the residency time on the cases this
already work very wall like Gnome environment. But so far let's get focused
on fixinge issues sio PSR couild be used for everybody and we could even
get it enabled by default. Later we can add some alternatives to choose the
level of PSR efficiency over boot flag of even over crtc property.

v2: remove exit from connector_dpms. Daniel pointed this is the wrong way and
also this isn't needed for BDW and HSW anyway.

Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: NVijay Purushothaman <vijay.a.purushothaman@intel.com>
Signed-off-by: NRodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Early revs didn't have PPGTT support, so disable there.

v2: add debug msg when disabling on early stepping
v3: enable on other B3 packages as well (untested) (Ville)

References: https://bugs.freedesktop.org/show_bug.cgi?id=79669
References: https://bugs.freedesktop.org/show_bug.cgi?id=79670Signed-off-by: NJesse Barnes <jbarnes@virtuousgeek.org>
Acked-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

CHECK   linux/drivers/gpu/drm/i915/i915_gem_execbuffer.c
linux/drivers/gpu/drm/i915/i915_gem_execbuffer.c:1529:47: warning: incorrect type in initializer (different address spaces)
linux/drivers/gpu/drm/i915/i915_gem_execbuffer.c:1529:47:    expected struct drm_i915_gem_exec_object2 *user_exec_list
linux/drivers/gpu/drm/i915/i915_gem_execbuffer.c:1529:47:    got void [noderef] <asn:1>*
linux/drivers/gpu/drm/i915/i915_gem_execbuffer.c:1533:61: warning: incorrect type in argument 1 (different address spaces)
linux/drivers/gpu/drm/i915/i915_gem_execbuffer.c:1533:61:    expected void [noderef] <asn:1>*dst
linux/drivers/gpu/drm/i915/i915_gem_execbuffer.c:1533:61:    got unsigned long long *<noident>
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Knowing the device stepping may be crucial in analyzing problems. Since
we always ask bug reporters for dmegs with drm.debug=0xe (or something)
it would be nice if the PCI revision is already included in the dump.
Avoids having to ask for lspci output as well.
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

obj->framebuffer_references isn't an atomic_t so the decrement needs to
be protected by some lock. struct_mutex seems like the appropriate lock
here, and we may already take it for the obj unref anyway.
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

On the current structure HSW doesn't support PSR with sprites enabled
but sprites can be enabled after PSR was enabled what would cause
user to miss screen updates.

v2: move it to update_plane.

Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: NVijay Purushothaman <vijay.a.purushothaman@intel.com>
Signed-off-by: NRodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Broadwell has a PSR per transcoder, where DDIA supports
link disable and link standby modes while other
transcoders only support link standby.
Reviewed-by: NVijay Purushothaman <vijay.a.purushothaman@intel.com>
Signed-off-by: NRodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Reviewed-by: NVijay Purushothaman <vijay.a.purushothaman@intel.com>
Signed-off-by: NRodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

When link is in stand by and PSR exit is triggered by a primary or sprite
plane flip this mode allows only one single updated frame to be send to
display than get back to PSR immediately.
Reviewed-by: NVijay Purushothaman <vijay.a.purushothaman@intel.com>
Signed-off-by: NRodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Also do not cache aux info. That info could be related to another panel.
Reviewed-by: NVijay Purushothaman <vijay.a.purushothaman@intel.com>
Signed-off-by: NRodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Being more conservative by enabling PSR only on psr_enable function.
Reviewed-by: NVijay Purushothaman <vijay.a.purushothaman@intel.com>
Signed-off-by: NRodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Let's be more conservative and protect platforms that don't
support PSR from unecessary interactions.
Reviewed-by: NVijay Purushothaman <vijay.a.purushothaman@intel.com>
Signed-off-by: NRodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

The DRM core will translate calls to legacy cursor ioctls into universal
cursor calls automatically, so there's no need to maintain the legacy
cursor support.  This greatly simplifies the transition since we don't
have to handle reference counting differently depending on which cursor
interface was called.

The aim here is to transition to the universal plane interface with
minimal code change.  There's a lot of cleanup that can be done (e.g.,
using state stored in crtc->cursor->fb rather than intel_crtc) that is
left to future patches.

v4:
 - Drop drm_gem_object_unreference() that is no longer needed now that
   we receive the GEM obj directly rather than looking up the ID.
v3:
 - Pass cursor obj to intel_crtc_cursor_set_obj() if cursor fb changes,
   even if 'visible' is false.  intel_crtc_cursor_set_obj() will notice
   that the cursor isn't visible and disable it properly, but we still
   need to get intel_crtc->cursor_addr set properly so that we behave
   properly if the cursor becomes visible again in the future without
   changing the cursor buffer (noted by Chris Wilson and verified
   via i-g-t kms_cursor_crc).
 - s/drm_plane_init/drm_universal_plane_init/.  Due to type
   compatibility between enum and bool, everything actually works
   correctly with the wrong init call, except for the type of plane that
   gets exposed to userspace (it shows up as type 'primary' rather than
   type 'cursor').
v2:
 - Remove duplicate dimension checks on cursor
 - Drop explicit cursor disable from crtc destroy (fb & plane
   destruction will take care of that now)
 - Use DRM plane helper to check update parameters

Cc: intel-gfx@lists.freedesktop.org
Signed-off-by: NMatt Roper <matthew.d.roper@intel.com>
Reviewed-by: Pallavi G<pallavi.g@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Refactor cursor buffer setting such that the code to actually update the
cursor lives in a new function, intel_crtc_cursor_set_obj(), and takes
a GEM object as a parameter.  The existing legacy cursor ioctl handler,
intel_crtc_cursor_set() will now perform the userspace handle lookup and
then call this new function.

This refactoring is in preparation for the universal plane cursor
support where we'll want to update the cursor with an actual GEM buffer
object (obtained via drm_framebuffer) rather than a userspace handle.

v2:  Drop obvious kerneldoc and replace with note about function's
     reference consumption
Reviewed-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: NMatt Roper <matthew.d.roper@intel.com>
Reviewed-by: Pallavi G<pallavi.g@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Universal plane support had placeholders for cursor planes, but didn't
actually do anything with them.  Save the cursor plane reference inside
the crtc and update the cursor plane parameter from void* to drm_plane.
Reviewed-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: NMatt Roper <matthew.d.roper@intel.com>
Reviewed-by: Pallavi G<pallavi.g@intel.com>
Acked-by: NDave Airlie <airlied@linux.ie>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

To disable a plane, userspace passes in an framebuffer id of 0. This
causes us to pass CRTC == NULL to setplane_internal, who promptly
deferences it to grab the struct drm_device. Oops.

[ 1296.467327] BUG: unable to handle kernel NULL pointer dereference at   (null)
[ 1296.467332] IP: [<c134dc51>] setplane_internal+0x11/0x280
[ 1296.467338] *pde = 00000000
[ 1296.467341] Oops: 0000 [#1] SMP
[ 1296.467344] Modules linked in: ccm bnep bluetooth snd_hda_codec_hdmi snd_hda_codec_idt snd_hda_codec_generic snd_hda_intel arc4 iwldvm snd_hda_controller snd_hda_codec mac80211 snd_hwdep snd_seq snd_seq_device snd_pcm snd_timer iwlwifi sdhci_pci snd cfg80211 x86_pkg_temp_thermal hp_wmi sdhci sparse_keymap mmc_core crc32c_intel rfkill microcode hp_accel lpc_ich lis3lv02d wmi mfd_core serio_raw input_polldev soundcore e1000e ptp pps_core
[ 1296.467367] CPU: 1 PID: 672 Comm: Xorg Tainted: G        W     3.15.0-rc8+ #351
[ 1296.467369] Hardware name: Hewlett-Packard HP ProBook 6360b/1620, BIOS 68SCF Ver. B.42 12/29/2010
[ 1296.467371] task: f423b5c0 ti: c2332000 task.ti: c2332000
[ 1296.467374] EIP: 0060:[<c134dc51>] EFLAGS: 00013286 CPU: 1
[ 1296.467376] EIP is at setplane_internal+0x11/0x280
[ 1296.467378] EAX: 00000000 EBX: c2333e90 ECX: 00000000 EDX: f3165600
[ 1296.467380] ESI: f430f400 EDI: 00000000 EBP: c2333e14 ESP: c2333dd4
[ 1296.467382]  DS: 007b ES: 007b FS: 00d8 GS: 0033 SS: 0068
[ 1296.467384] CR0: 80050033 CR2: 00000000 CR3: 00159000 CR4: 000407d0
[ 1296.467385] Stack:
[ 1296.467387]  000200da 00000002 c2333de8 c15dc4a0 f430f400 c2333e00 c134c54f eeeeeeee
[ 1296.467391]  f430f400 00000007 f416b480 c2333e14 00000000 c2333e90 f430f400 00000000
[ 1296.467396]  c2333e4c c1350aed 00000000 00000000 00000000 00000000 00000000 00000000
[ 1296.467400] Call Trace:
[ 1296.467406]  [<c15dc4a0>] ? mutex_lock+0x10/0x28
[ 1296.467408]  [<c134c54f>] ? _object_find+0x5f/0x90
[ 1296.467413]  [<c1350aed>] drm_mode_setplane+0x10d/0x1f0
[ 1296.467416]  [<c13509e0>] ? drm_mode_getplane+0x100/0x100
[ 1296.467420]  [<c1342e4d>] drm_ioctl+0x1bd/0x4f0
[ 1296.467423]  [<c13509e0>] ? drm_mode_getplane+0x100/0x100
[ 1296.467427]  [<c111c023>] ? handle_mm_fault+0x5d3/0xb30
[ 1296.467431]  [<c1118f31>] ? tlb_finish_mmu+0x11/0x40
[ 1296.467435]  [<c1342c90>] ? drm_ioctl_flags+0x40/0x40
[ 1296.467438]  [<c11593d2>] do_vfs_ioctl+0x2f2/0x4d0
[ 1296.467443]  [<c1226512>] ? inode_has_perm.isra.32+0x32/0x40
[ 1296.467446]  [<c122662f>] ? file_has_perm+0x7f/0x90
[ 1296.467449]  [<c1226fec>] ? selinux_file_ioctl+0x4c/0xf0
[ 1296.467452]  [<c1159610>] SyS_ioctl+0x60/0x90
[ 1296.467456]  [<c15e578c>] sysenter_do_call+0x12/0x22
[ 1296.467457] Code: 3f cf ff eb dd ba 3f 00 00 00 b8 d9 c9 7f c1 e8 e6 3f cf ff eb d9 8d 74 26 00 55 89 e5 57 56 53 83 ec 34 66 66 66 66 90 89 45 f0 <8b> 00 85 c9 89 d6 89 cb 89 45 ec 0f 84 16 01 00 00 8b 45 f0 e8
[ 1296.467485] EIP: [<c134dc51>] setplane_internal+0x11/0x280 SS:ESP 0068:c2

Fixes regression from
commit b02fd7fd8a541c3d590bfdda23365a927b507ceb
Author: Matt Roper <matthew.d.roper@intel.com>
Date:   Tue Jun 10 08:28:10 2014 -0700

    drm: Support legacy cursor ioctls via universal planes when possible (v4)

While at it move the plane parameter to the first position in
setplane_internal since that's the main object we're manipulating.
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Pallavi G<pallavi.g@intel.com>
Cc: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: NMatt Roper <matthew.d.roper@intel.com>
[danvet: Add note about parameter reordering.]
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

If drivers support universal planes and have registered a cursor plane
with the DRM core, we should use that universal plane support when
handling legacy cursor ioctls.  Drivers that transition to universal
planes won't have to maintain separate legacy ioctl handling; drivers
that don't transition to universal planes will continue to operate
without any change to behavior.

Note that there's a bit of a mismatch between the legacy cursor ioctls
and the universal plane API's --- legacy ioctl's use driver buffer
handles directly whereas the universal plane API takes drm_framebuffers.
Since there's no way to recover the driver handle from a
drm_framebuffer, we can implement legacy ioctl's in terms of universal
plane interfaces, but cannot implement universal plane interfaces in
terms of legacy ioctls.  Specifically, there's no way to create a
general cursor helper in the way we previously created a primary plane
helper.

It's important to land this patch before any patches that add universal
cursor support to individual drivers so that drivers don't have to worry
about juggling two different styles of reference counting for cursor
buffers when userspace mixes and matches legacy and universal cursor
calls.  With this patch, a driver that switches to universal cursor
support may assume that all cursor buffers are wrapped in a
drm_framebuffer and can rely on framebuffer reference counting for all
cursor operations.

v4:
 - Add comments pointing out setplane_internal's reference-eating
   semantics.
v3:
 - Drop drm_mode_rmfb() call that is no longer needed now that we're
   using setplane_internal(), which takes care of deref'ing the
   appropriate framebuffer.
v2:
 - Use new add_framebuffer_internal() function to create framebuffer
   rather than trying to call directly into the ioctl interface and
   look up the handle returned.
 - Use new setplane_internal() function to update the cursor plane
   rather than calling through the ioctl interface.  Note that since
   we're no longer looking up an fb_id, no extra reference will be
   taken here.
 - Grab extra reference to fb under lock in !BO case to avoid issues
   where racing userspace could cause the fb to be destroyed out from
   under us after we grab the fb pointer.
Reviewed-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: NMatt Roper <matthew.d.roper@intel.com>
Reviewed-by: Pallavi G<pallavi.g@intel.com>
Acked-by: NDave Airlie <airlied@linux.ie>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Refactor DRM setplane code into a new setplane_internal() function that
takes DRM objects directly as parameters rather than looking them up by
ID.  We'll use this in a future patch when we implement legacy cursor
ioctls on top of the universal plane interface.

v3:
 - Move integer overflow checking from setplane_internal to setplane
   ioctl.  The upcoming legacy cursor support via universal planes needs
   to maintain current cursor ioctl semantics and not return error for
   these extreme values (found via intel-gpu-tools kms_cursor_crc test).
v2:
 - Allow planes to be disabled without a valid crtc again (and add
   mention of this to setplane's kerneldoc, since it doesn't seem to be
   mentioned anywhere else).
 - Reformat some parameter line wrap
Reviewed-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: NMatt Roper <matthew.d.roper@intel.com>
Reviewed-by: Pallavi G<pallavi.g@intel.com>
Acked-by: NDave Airlie <airlied@linux.ie>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Refactor DRM framebuffer creation into a new function that returns a
struct drm_framebuffer directly.  The upcoming universal cursor support
will want to create framebuffers internally to wrap cursor buffers, so
we want to be able to share that framebuffer creation with the
drm_mode_addfb2 ioctl handler.

v2: Take struct drm_mode_fb_cmd2 parameter directly rather than void*
Reviewed-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: NMatt Roper <matthew.d.roper@intel.com>
Reviewed-by: Pallavi G<pallavi.g@intel.com>
Acked-by: NDave Airlie <airlied@linux.ie>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Correct a merge mishap in commit e4443e45.

Wa*:chv belongs in cherryview_enable_rps, not gen8_enable_rps.
Signed-off-by: NTom O'Rourke <Tom.O'Rourke@intel.com>
Reviewed-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

These do not exist anymore.

Spotted while reading through intel_ringbuffer.c
Signed-off-by: NOscar Mateo <oscar.mateo@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Inserting additional PTEs has no side-effect for us as the pfn are fixed
for the entire time the object is resident in the global GTT. The
downside is that we pay the entire cost of faulting the object upon the
first hit, for which we in return receive the benefit of removing the
per-page faulting overhead.

On an Ivybridge i7-3720qm with 1600MHz DDR3, with 32 fences,
Upload rate for 2 linear surfaces:	8127MiB/s -> 8134MiB/s
Upload rate for 2 tiled surfaces:	8607MiB/s -> 8625MiB/s
Upload rate for 4 linear surfaces:	8127MiB/s -> 8127MiB/s
Upload rate for 4 tiled surfaces:	8611MiB/s -> 8602MiB/s
Upload rate for 8 linear surfaces:	8114MiB/s -> 8124MiB/s
Upload rate for 8 tiled surfaces:	8601MiB/s -> 8603MiB/s
Upload rate for 16 linear surfaces:	8110MiB/s -> 8123MiB/s
Upload rate for 16 tiled surfaces:	8595MiB/s -> 8606MiB/s
Upload rate for 32 linear surfaces:	8104MiB/s -> 8121MiB/s
Upload rate for 32 tiled surfaces:	8589MiB/s -> 8605MiB/s
Upload rate for 64 linear surfaces:	8107MiB/s -> 8121MiB/s
Upload rate for 64 tiled surfaces:	2013MiB/s -> 3017MiB/s
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Cc: "Goel, Akash" <akash.goel@intel.com>
Testcasee: igt/gem_fence_upload/performance
Reviewed-by: NBrad Volkin <bradley.d.volkin@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Adding missing Display mmio reg offset.

Credits-to: Laws, Philip <philip.laws@intel.com>
Cc: He, Shuang <shuang.he@intel.com>
Signed-off-by: NRodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Atm, the forcewake refcount will be incorrectly set to zero during
system suspend if there is any reference held via the
i915_forcewake_user debugfs entry.

Fix this by simply not zeroing the sw counters during suspend and
restoring the original state using them. Note that the only other
places where we zeroed the counters were driver load and unload time,
where it was redundant anyway.

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=78059Signed-off-by: NImre Deak <imre.deak@intel.com>
Reviewed-by: NChris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>