Otherwise it will cause that S-video output becomes black/white when
switching to other TV format.

http://bugs.freedesktop.org/show_bug.cgi?id=23916Signed-off-by: NZhao Yakui <yakui.zhao@intel.com>
Tested-by: NArnold <arnold.erbsloeh@web.de>
Tested-by: NBazin <bazin.cz@gmail.com>
Tested-by: NNigel <nigel_tuck@eircom.net>
Signed-off-by: NZhenyu Wang <zhenyuw@linux.intel.com>

SDVO on Ibexpeak PCH with Ironlake is multiplexed with
HDMIB port, and only has SDVOB port.
Signed-off-by: NZhao Yakui <yakui.zhao@intel.com>
Signed-off-by: NZhenyu Wang <zhenyuw@linux.intel.com>

The existing code handling the DPMS ON event is much more careful to
ensure that these registers are enabled according to strict sequencing
requirements. Enabling these early in mode_set simply defeats that.
Signed-off-by: NCarl Worth <cworth@cworth.org>
Signed-off-by: NEric Anholt <eric@anholt.net>

->dev_private at that point is NULL and is initialied only a few lines
later.
Signed-off-by: NLuca Tettamanti <kronos.it@gmail.com>
Signed-off-by: NEric Anholt <eric@anholt.net>

This reverts commit 6070a4a9.

The quirk for this SDVO device on IBM specific board is just a hack
in old code which showed the broken multifunction SDVO support in
the driver. Multifunction SDVO patch provided the right fix for it.
Signed-off-by: NZhenyu Wang <zhenyuw@linux.intel.com>

With new intel_encoder/intel_connector structure change, each supported
connector type on SDVO device will be created as a new 'intel_connector',
and all attached to one 'intel_encoder' for its SDVO port.

The SDVO encoder will handle SDVO protocol stuff, and each connector does
its own part of work now, like detection is only to check if current active
output is itself, etc.

Update since last submit:
- Fixed SDVO TV property creation failure by incorrect set target output call
Signed-off-by: NZhenyu Wang <zhenyuw@linux.intel.com>

Added by original eDP support patch, not used any more.
Signed-off-by: NZhenyu Wang <zhenyuw@linux.intel.com>

As all display drivers have been converted, remove the left reference
for connector object in old structure.
Signed-off-by: NZhenyu Wang <zhenyuw@linux.intel.com>

Signed-off-by: NZhenyu Wang <zhenyuw@linux.intel.com>

Signed-off-by: NZhenyu Wang <zhenyuw@linux.intel.com>

Also remove old UMS copied code for get_crtc.
Signed-off-by: NZhenyu Wang <zhenyuw@linux.intel.com>
Signed-off-by: NEric Anholt <eric@anholt.net>

Signed-off-by: NZhenyu Wang <zhenyuw@linux.intel.com>
Signed-off-by: NEric Anholt <eric@anholt.net>

Signed-off-by: NZhenyu Wang <zhenyuw@linux.intel.com>
Signed-off-by: NEric Anholt <eric@anholt.net>

Signed-off-by: NZhenyu Wang <zhenyuw@linux.intel.com>
Signed-off-by: NEric Anholt <eric@anholt.net>

Signed-off-by: NZhenyu Wang <zhenyuw@linux.intel.com>
Signed-off-by: NEric Anholt <eric@anholt.net>

Probably only matters for format-converting dongles, but might as well
get it right all the time.
Signed-off-by: NAdam Jackson <ajax@redhat.com>
Signed-off-by: NEric Anholt <eric@anholt.net>

Signed-off-by: NAdam Jackson <ajax@redhat.com>
Signed-off-by: NEric Anholt <eric@anholt.net>

DP on Cougarpoint has new training pattern definitions, and
new transcoder DP control register is used to determine the mapping
for transcoder and DP digital output. And eDP for Sandybridge has
new voltage and pre-emphasis level definitions.
Signed-off-by: NZhenyu Wang <zhenyuw@linux.intel.com>
Signed-off-by: NEric Anholt <eric@anholt.net>

Fix transcoder select bit for HDMI on CPT.
Signed-off-by: NZhenyu Wang <zhenyuw@linux.intel.com>
Signed-off-by: NEric Anholt <eric@anholt.net>

Fix the transcoder select bit for LVDS on CPT.
Signed-off-by: NZhenyu Wang <zhenyuw@linux.intel.com>
Signed-off-by: NEric Anholt <eric@anholt.net>

To make CRT force detect reliable on Cougarpoint, we need to
disable DAC before force detect, and restore back when trigger
is completed.
Signed-off-by: NZhenyu Wang <zhenyuw@linux.intel.com>
Signed-off-by: NEric Anholt <eric@anholt.net>

Cougarpoint is the new PCH for Sandybridge CPU. This one resolves the
chipset change for display pipeline compared to previous Ibexpeak PCH.

Sandybridge/Cougarpoint has different FDI training parameters, so this also
makes seperate FDI training functions for IBX and CPT. Other change includes
new transcoder DPLL select function to set which DPLL for transcoder to pick
up.

And with another new transcoder C introduced in Cougarpoint, each connector
has new transcoder select bits. This one adds that change to light up VGA.
Signed-off-by: NZhenyu Wang <zhenyuw@linux.intel.com>
Signed-off-by: NEric Anholt <eric@anholt.net>

PCH is the new name for south bridge from Ironlake/Sandybridge,
which contains most of the display outputs except eDP. This one
adds a probe function to detect current PCH type, and method to
detect Cougarpoint PCH.
Signed-off-by: NZhenyu Wang <zhenyuw@linux.intel.com>
Signed-off-by: NEric Anholt <eric@anholt.net>

Integrated TV is deprecated in new chips from Ironlake.
Signed-off-by: NZhenyu Wang <zhenyuw@linux.intel.com>
Signed-off-by: NEric Anholt <eric@anholt.net>

OpRegion event on 965G requires legacy BLC event enabled in pipe stat. As LVDS
could be on either pipe now, we should enable BLC event on both pipe. If fail to
do so, we couldn't handle the brightness request triggered from graphics
opregion.
Signed-off-by: NZhao Yakui <yakui.zhao@intel.com>
Signed-off-by: NZhenyu Wang <zhenyuw@linux.intel.com>
Signed-off-by: NEric Anholt <eric@anholt.net>

Based on a patch by Zhao Yakui.
Signed-off-by: NEric Anholt <eric@anholt.net>

The gen4 docs say it works, so why not.  Tested on Ironlake.
Signed-off-by: NAdam Jackson <ajax@redhat.com>
Signed-off-by: NEric Anholt <eric@anholt.net>

This was brought over from UMS, and used for a while until we decided
that drm_helper_resume_force_mode was easier and more reliable, since
it didn't require duplicating all the code deleted here.  We just
forgot to delete all that junk for a while.

This one replaces original param for intel_ddc_get_modes() with
DRM connector and i2c bus adapter instead. With explicit params,
we won't require that a single driver structure must hold connector
and DDC bus reference, which ease the conversion to splitted encoder/
connector model.

It also clears up for some cases that we would steal other DDC bus
for mode probe, like VGA analog DDC probe for DVI-I. Also it fixed
a bug in old DVI-I probe handling, that failed to restore origin
analog GPIO port.
Signed-off-by: NZhenyu Wang <zhenyuw@linux.intel.com>
Signed-off-by: NEric Anholt <eric@anholt.net>

In load detection, connector's encoder assignment must be kept
consistent for proper mode setting, and this makes connector as
explicit parameter for load detect function to not require single
data structure to hold both encoder and connector reference, ease
the transition for splitted encoder/connector model.
Signed-off-by: NZhenyu Wang <zhenyuw@linux.intel.com>
Signed-off-by: NEric Anholt <eric@anholt.net>

For introducing splitted encoder/connector structure, this helper will return
connector's attached encoder when needed.
Signed-off-by: NZhenyu Wang <zhenyuw@linux.intel.com>
Signed-off-by: NEric Anholt <eric@anholt.net>

This adds new structure of intel_connector to present drm's
connector object, which is used to convert from origin single
output into encoder/connector model.
Signed-off-by: NZhenyu Wang <zhenyuw@linux.intel.com>
Signed-off-by: NEric Anholt <eric@anholt.net>

What we really want is encoder info instead of connector, so change
some more list walk in pipeline setup functions from connector_list
to encoder_list.
Signed-off-by: NZhenyu Wang <zhenyuw@linux.intel.com>
Signed-off-by: NEric Anholt <eric@anholt.net>

Instead of walking through drm connector_list uses encoder_list
for calling hotplug functions which is consistent with intel display
hotplug reporting.
Signed-off-by: NZhenyu Wang <zhenyuw@linux.intel.com>
Signed-off-by: NEric Anholt <eric@anholt.net>

Use DECLARE_EVENT_CLASS to remove duplicate code:

   text    data     bss     dec     hex filename
  14655    2732      15   17402    43fa i915_trace_points.o.orig
  11625    2732      10   14367    381f i915_trace_points.o

8 events are converted:

  i915_gem_object:  i915_gem_object_{unbind, destroy}
  i915_gem_request: i915_gem_request_{complete, retire, wait_begin, wait_end}
  i915_ring:        i915_ring_{wait_begin, wait_end}

No functional change.
Signed-off-by: NLi Zefan <lizf@cn.fujitsu.com>
Signed-off-by: NEric Anholt <eric@anholt.net>

The TV detection logic is not reliable on the Cantiga platform.
Sometimes the TV will be misdetected as the following two cases:
- TV is misdetected on some laptops. e.g. There is no TV connector
port or no TV is attached. But the TV is shown as connected.
- TV connector type is misdetected. e.g. the component TV is
attached, but the TV is shown as S-video type.

According to the hardware requirement, the TV sense state bits of TV DAC
register should be cleared to zero on Cantiga platfrom.

https://bugzilla.kernel.org/show_bug.cgi?id=14792

Cc: Stable Team <stable@kernel.org>
Signed-off-by: NZhao Yakui <yakui.zhao@intel.com>
Tested-by: NSanti <santi@agolina.net>
Signed-off-by: NZhenyu Wang <zhenyuw@linux.intel.com>
Signed-off-by: NEric Anholt <eric@anholt.net>

This trys to shut up complains about invalid LVDS EDID during
mode probe, but uses fixed panel mode directly for panels with
broken EDID.

https://bugs.freedesktop.org/show_bug.cgi?id=23099
https://bugs.freedesktop.org/show_bug.cgi?id=26395Signed-off-by: NZhao Yakui <yakui.zhao@intel.com>
Tested-by: NSitsofe Wheeler <sitsofe@yahoo.com>
Signed-off-by: NZhenyu Wang <zhenyuw@linux.intel.com>
Signed-off-by: NEric Anholt <eric@anholt.net>

BugLink: http://bugs.launchpad.net/ubuntu/bugs/544671

This system claims to have a LVDS but has not.
Signed-off-by: NStephane Graber <stgraber@ubuntu.com>
Signed-off-by: NStefan Bader <stefan.bader@canonical.com>
CC: stable@kernel.org
Signed-off-by: NEric Anholt <eric@anholt.net>

Signed-off-by: NEric Anholt <eric@anholt.net>

The intel_output naming is inherited from the UMS code, which had a
structure of screen -> CRTC -> output.  The DRM code has an additional
notion of encoder/connector, so the structure is screen -> CRTC ->
encoder -> connector.  This is a useful structure for SDVO encoders
which can support multiple connectors (each of which requires
different programming in the one encoder and could be connected to
different CRTCs), or for DVI-I, where multiple encoders feed into the
connector for whether it's used for digital or analog.  Most of our
code is encoder-related, so transition it to talking about encoders
before we start trying to distinguish connectors.

This patch is produced by sed s/intel_output/intel_encoder/ over the
driver.
Signed-off-by: NEric Anholt <eric@anholt.net>