Skip to content

R
raspberrypi-kernel

openeuler / raspberrypi-kernel

通知 13
Star 1
Fork 0
R
raspberrypi-kernel
切换分支/标签
  1. 07 3月, 2015 18 次提交
  3. 06 3月, 2015 22 次提交
    • S
      e1000: add dummy allocator to fix race condition between mtu change and netpoll · 08e83316
      由 Sabrina Dubroca 提交于 
      There is a race condition between e1000_change_mtu's cleanups and
netpoll, when we change the MTU across jumbo size:

Changing MTU frees all the rx buffers:
    e1000_change_mtu -> e1000_down -> e1000_clean_all_rx_rings ->
        e1000_clean_rx_ring

Then, close to the end of e1000_change_mtu:
    pr_info -> ... -> netpoll_poll_dev -> e1000_clean ->
        e1000_clean_rx_irq -> e1000_alloc_rx_buffers -> e1000_alloc_frag

And when we come back to do the rest of the MTU change:
    e1000_up -> e1000_configure -> e1000_configure_rx ->
        e1000_alloc_jumbo_rx_buffers

alloc_jumbo finds the buffers already != NULL, since data (shared with
page in e1000_rx_buffer->rxbuf) has been re-alloc'd, but it's garbage,
or at least not what is expected when in jumbo state.

This results in an unusable adapter (packets don't get through), and a
NULL pointer dereference on the next call to e1000_clean_rx_ring
(other mtu change, link down, shutdown):

BUG: unable to handle kernel NULL pointer dereference at           (null)
IP: [<ffffffff81194d6e>] put_compound_page+0x7e/0x330

    [...]

Call Trace:
 [<ffffffff81195445>] put_page+0x55/0x60
 [<ffffffff815d9f44>] e1000_clean_rx_ring+0x134/0x200
 [<ffffffff815da055>] e1000_clean_all_rx_rings+0x45/0x60
 [<ffffffff815df5e0>] e1000_down+0x1c0/0x1d0
 [<ffffffff811e2260>] ? deactivate_slab+0x7f0/0x840
 [<ffffffff815e21bc>] e1000_change_mtu+0xdc/0x170
 [<ffffffff81647050>] dev_set_mtu+0xa0/0x140
 [<ffffffff81664218>] do_setlink+0x218/0xac0
 [<ffffffff814459e9>] ? nla_parse+0xb9/0x120
 [<ffffffff816652d0>] rtnl_newlink+0x6d0/0x890
 [<ffffffff8104f000>] ? kvm_clock_read+0x20/0x40
 [<ffffffff810a2068>] ? sched_clock_cpu+0xa8/0x100
 [<ffffffff81663802>] rtnetlink_rcv_msg+0x92/0x260

By setting the allocator to a dummy version, netpoll can't mess up our
rx buffers.  The allocator is set back to a sane value in
e1000_configure_rx.

Fixes: edbbb3ca ("e1000: implement jumbo receive with partial descriptors")
Signed-off-by: NSabrina Dubroca <sd@queasysnail.net>
Tested-by: NAaron Brown <aaron.f.brown@intel.com>
Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
      08e83316
    • E
      e1000: call netif_carrier_off early on down · f9c029db
      由 Eliezer Tamir 提交于 
      When bringing down an interface netif_carrier_off() should be
one the first things we do, since this will prevent the stack
from queuing more packets to this interface.
This operation is very fast, and should make the device behave
much nicer when trying to bring down an interface under load.

Also, this would Do The Right Thing (TM) if this device has some
sort of fail-over teaming and redirect traffic to the other IF.

Move netif_carrier_off as early as possible.
Signed-off-by: NEliezer Tamir <eliezer.tamir@linux.intel.com>
Tested-by: NAaron Brown <aaron.f.brown@intel.com>
Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
      f9c029db
    • A
      igb: Make arrays on stack static const to avoid reallocation · b23c0cc5
      由 Alexander Duyck 提交于 
      While addressing the pin problem I noticed that all of the pin register
values where having to be pushed onto the stack each time the function was
called.  To avoid that I am making them static const so that they should
only need to be allocated once and we can avoid all the instructions to get
them onto the stack..

size before:
   text	   data	    bss	    dec	    hex	filename
 161477	  10512	      8	 171997	  29fdd	drivers/net/ethernet/intel/igb/igb.ko

size after:
   text	   data	    bss	    dec	    hex	filename
 161205	  10512	      8	 171725	  29ecd	drivers/net/ethernet/intel/igb/igb.ko
Signed-off-by: NAlexander Duyck <alexander.h.duyck@redhat.com>
Tested-by: NAaron Brown <aaron.f.brown@intel.com>
Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
      b23c0cc5
    • A
      igb: Fix warning pin may be used uninitialized · e357f0aa
      由 Alexander Duyck 提交于 
      When building the kernel using the gcc 4.8.3 compiler included in Fedora 20
I was repeatedly seeing the warning:

 drivers/net/ethernet/intel/igb/igb_ptp.c: In function ‘igb_ptp_feature_enable_i210’:
 drivers/net/ethernet/intel/igb/igb_ptp.c:395:21: warning: ‘pin’ may be used uninitialized in this function
 [-Wmaybe-uninitialized]
   tssdp &= ~ts_sdp_en[pin];
                     ^
 drivers/net/ethernet/intel/igb/igb_ptp.c:471:6: note: ‘pin’ was declared here
   int pin;
       ^

To resolve it I am assigning the pin a value of -1 when it is instantiated.
Signed-off-by: NAlexander Duyck <alexander.h.duyck@redhat.com>
Tested-by: NAaron Brown <aaron.f.brown@intel.com>
Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
      e357f0aa
    • Y
      e1000e: remove calls to ioremap/unmap for NVM addr · 1103a631
      由 Yanir Lubetkin 提交于 
      Starting I219, the NVM will not be mapped to its own BAR, but to an
address region in another bar.  The mapping/unmapping is relevant
to older HW only.

CC: John W Linville <linville@tuxdriver.com>
Reported-by: NJohn W Linville <linville@tuxdriver.com>
Signed-off-by: NYanir Lubetkin <yanirx.lubetkin@intel.com>
Tested-by: NAaron Brown <aaron.f.brown@intel.com>
Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
      1103a631
    • Y
      e1000e: fix obscure comments · 9d17ce49
      由 Yanir Lubetkin 提交于 
      The interface to the device flash was modified in i219 and later HW.
This patch better describes the change and the impact on the driver.

CC: John W Linville <linville@tuxdriver.com>
Reported-by: NJohn W Linville <linville@tuxdriver.com>
Signed-off-by: NYanir Lubetkin <yanirx.lubetkin@intel.com>
Tested-by: NAaron Brown <aaron.f.brown@intel.com>
Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
      9d17ce49
    • D
      ipv4: Fix unused variable warnings in fib_table_flush_external. · 23375a0f
      由 David S. Miller 提交于 
      net/ipv4/fib_trie.c: In function ‘fib_table_flush_external’:
net/ipv4/fib_trie.c:1572:6: warning: unused variable ‘found’ [-Wunused-variable]
  int found = 0;
      ^
net/ipv4/fib_trie.c:1571:16: warning: unused variable ‘slen’ [-Wunused-variable]
  unsigned char slen;
                ^
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      23375a0f
    • D
      Merge branch 'l3_hw_offload' · fabe7bed
      由 David S. Miller 提交于 
      Scott Feldman says:

====================
switchdev: add IPv4 routing offload

v4:

  - Add NETIF_F_NETNS_LOCAL to rocker port feature list to keep rocker
    ports in the default netns.  Rocker hardware can't be partitioned
    to support multiple namespaces, currently.  It would be interesting
    to add netns support to rocker device by basically adding another
    match field to each table to match on some unique netns ID, with
    a port knowing it's netns ID.  Future work TDB.
  - Up-level the RTNH_F_EXTERNAL marking of routes installed to offload
    device from driver to switchdev common code.  Now driver can't skip
    routes.  Either it can install the route or it cannot.  Yes or No.
    If no on any route, all offloading is aborted by removing routes
    from offload device and setting ipv4.fib_offload_disabled so no more
    routes can be offloaded.  This is harsh, but it's our starting point.
    We can refine the policies in follow-up work.
  - Add new net.ipv4.fib_offload_disabled bool that is set if anything
    goes wrong with route offloading.  We can refine this later to make
    the setting per-device or per-device-port-netdev, but let's start
    here simple and refine in follow-up work.
  - Rebase against Alex's latest FIB changes.  I think I did everything
    correctly, and didn't run into any issues with testing, but I'd like
    Alex to look over the changes and maybe follow-up with any cleanups.

v3:

Changes based on v2 review comments:

  - Move check for custom rules up earlier in patch set, to keep git bisect
    safe.
  - Simplify the route add/modify failure handling to simple try until
    failure, and then on failure, undo everything.  The switchdev driver
    will return err when route can normally be installed to device, but
    the install fails for one reason or another (no space left on device,
    etc).  If a failure happens, uninstall all routes from the device,
    punting forwarding for all routes back to the kernel.
  - Scan route's full nexthop list, ensuring all nexthop devs belong
    to the same switchdev device, otherwise don't try to install route
    to device.

v2:

Changes based on v1 review comments and discussions at netconf:

  - Allow route modification, but use same ndo op used for adding route.
    Driver/device is expected to modify route in-place, if it can, to avoid
    interruption of service.
  - Add new RTNH_F_EXTERNAL flag to mark FIB entries offloaded externally.
  - Don't offload routes if using custom IP rules.  If routes are already
    offloaded, and custom IP rules are turned on, flush routes from offload
    device.  (Offloaded routes are marked with RTNH_F_EXTERNAL).
  - Use kernel's neigh resolution code to resolve route's nexthops' neigh
    MAC addrs.  (Thanks davem, works great!).
  - Use fib->fib_priority in rocker driver to give priorities to routes in
    OF-DPA unicast route table.

v1:

This patch set adds L3 routing offload support for IPv4 routes.  The idea is to
mirror routes installed in the kernel's FIB down to a hardware switch device to
offload the data forwarding path for L3.  Only the data forwarding path is
intercepted.  Control and management of the kernel's FIB remains with the
kernel.
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      fabe7bed
    • S
      rocker: implement IPv4 fib offloading · c1beeef7
      由 Scott Feldman 提交于 
      The driver implements ndo_switch_fib_ipv4_add/del ops to add/del/mod IPv4
routes to/from switchdev device.  Once a route is added to the device, and the
route's nexthops are resolved to neighbor MAC address, the device will forward
matching pkts rather than the kernel.  This offloads the L3 forwarding path
from the kernel to the device.  Note that control and management planes are
still mananged by Linux; only the data plane is offloaded.  Standard routing
control protocols such as OSPF and BGP run on Linux and manage the kernel's FIB
via standard rtm netlink msgs...nothing changes here.

A new hash table is added to rocker to track neighbors.  The driver listens for
neighbor updates events using netevent notifier NETEVENT_NEIGH_UPDATE.  Any ARP
table updates for ports on this device are recorded in this table.  Routes
installed to the device with nexthops that reference neighbors in this table
are "qualified".  In the case of a route with nexthops not resolved in the
table, the kernel is asked to resolve the nexthop.

The driver uses fib_info->fib_priority for the priority field in rocker's
unicast routing table.

The device can only forward to pkts matching route dst to resolved nexthops.
Currently, the device only supports single-path routes (i.e. routes with one
nexthop).  Equal Cost Multipath (ECMP) route support will be added in followup
patches.

This patch is driver support for unicast IPv4 routing only.  Followup patches
will add driver and infrastructure for IPv6 routing and multicast routing.
Signed-off-by: NScott Feldman <sfeldma@gmail.com>
Signed-off-by: NJiri Pirko <jiri@resnulli.us>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      c1beeef7
    • S
      fib: hook IPv4 fib for hardware offload · 8e05fd71
      由 Scott Feldman 提交于 
      Call into the switchdev driver any time an IPv4 fib entry is
added/modified/deleted from the kernel's FIB.  The switchdev driver may or
may not install the route to the offload device.  In the case where the
driver tries to install the route and something goes wrong (device's routing
table is full, etc), then all of the offloaded routes will be flushed from the
device, route forwarding falls back to the kernel, and no more routes are
offloading.

We can refine this logic later.  For now, use the simplist model of offloading
routes up to the point of failure, and then on failure, undo everything and
mark IPv4 offloading disabled.
Signed-off-by: NScott Feldman <sfeldma@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      8e05fd71
    • S
      ipv4: add net bool fib_offload_disabled · 448b128a
      由 Scott Feldman 提交于 
      If something goes wrong with IPv4 FIB offload, mark entire net offload
disabled.  This is brute force policy to basically shut down IPv4 FIB offload
permanently if there is a problem offloading any route to an external device.
We can refine the policy in the future, to handle failures on a per-device or
per-route basis, but for now, this policy is per-net.

What we're trying to avoid is an inconsistent split between the kernel's FIB
and the offload device's FIB.  We don't want the device to fwd a pkt
inconsitent with what the kernel would do.  An example of a split is if device
has 10.0.0.0/16 and kernel has 10.0.0.0/16 and 10.0.0.0/24, the device wouldn't
see the longest prefix 10.0.0.0/24 and potentially forward pkts incorrectly.

Limited capacity or limited capability are two ways a route may fail to install
to the offload device.  We'll not differentiate between failures at this time,
and treat any failure as fatal and mark the net as fib_offload_disabled.
Signed-off-by: NScott Feldman <sfeldma@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      448b128a
    • S
      switchdev: implement IPv4 fib ndo wrappers · b5d6fbde
      由 Scott Feldman 提交于 
      Flesh out ndo wrappers to call into device driver.  To call into device driver,
the wrapper must interate over route's nexthops to ensure all nexthop devs
belong to the same switch device.  Currently, there is no support for route's
nexthops spanning offloaded and non-offloaded devices, or spanning ports of
multiple offload devices.

Since switch device ports may be stacked under virtual interfaces (bonds and/or
bridges), and the route's nexthop may be on the virtual interface, the wrapper
will traverse the nexthop dev down to the base dev.  It's the base dev that's
passed to the switchdev driver's ndo ops.
Signed-off-by: NScott Feldman <sfeldma@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      b5d6fbde
    • S
      switchdev: don't support custom ip rules, for now · 104616e7
      由 Scott Feldman 提交于 
      Keep switchdev FIB offload model simple for now and don't allow custom ip
rules.
Signed-off-by: NScott Feldman <sfeldma@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      104616e7
    • S
      switchdev: add IPv4 fib ndo ops wrappers · 5e8d9049
      由 Scott Feldman 提交于 
      Add IPv4 fib ndo wrapper funcs and stub them out for now.
Signed-off-by: NScott Feldman <sfeldma@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      5e8d9049
    • S
      netdevice: add IPv4 fib add/del ops · 4586f1bb
      由 Scott Feldman 提交于 
      Add two new ndo ops for IPv4 fib offload support, add and del.  Add uses
modifiy semantics if fib entry already offloaded.  Drivers implementing the new
ndo ops will return err<0 if programming device fails, for example if device's
tables are full.
Signed-off-by: NScott Feldman <sfeldma@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      4586f1bb
    • S
      rtnetlink: add RTNH_F_EXTERNAL flag for fib offload · 37ed9493
      由 Scott Feldman 提交于 
      Add new RTNH_F_EXTERNAL flag to mark fib entries offloaded externally, for
example to a switchdev switch device.
Signed-off-by: NScott Feldman <sfeldma@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      37ed9493
    • E
      tg3: use napi_complete_done() · 24d2e4a5
      由 Eric Dumazet 提交于 
      Using napi_complete_done() instead of napi_complete() allows
us to use /sys/class/net/ethX/gro_flush_timeout

GRO layer can aggregate more packets if the flush is delayed a bit,
without having to set too big coalescing parameters that impact
latencies.

Tested:

lpx:~# echo 0 >/sys/class/net/eth1/gro_flush_timeout

lpx:~# sar -n DEV 1 10 | grep eth1
10:36:25 AM      eth1  81290.00  40617.00 120479.67   2777.01      0.00      0.00      0.00
10:36:26 AM      eth1  81283.00  40608.00 120481.81   2778.13      0.00      0.00      1.00
10:36:27 AM      eth1  81304.00  40639.00 120518.42   2778.28      0.00      0.00      0.00
10:36:28 AM      eth1  81255.00  40605.00 120437.34   2775.95      0.00      0.00      1.00
10:36:29 AM      eth1  81306.00  40630.00 120521.44   2777.70      0.00      0.00      0.00
10:36:30 AM      eth1  81286.00  40564.00 120480.20   2773.31      0.00      0.00      0.00
10:36:31 AM      eth1  81256.00  40599.00 120438.81   2776.27      0.00      0.00      0.00
10:36:32 AM      eth1  81287.00  40594.00 120480.69   2776.69      0.00      0.00      0.00
10:36:33 AM      eth1  81279.00  40601.00 120478.53   2775.84      0.00      0.00      0.00
10:36:34 AM      eth1  81277.00  40610.00 120476.94   2776.25      0.00      0.00      0.00
Average:         eth1  81282.30  40606.70 120479.39   2776.54      0.00      0.00      0.20

lpx:~# echo 13000 >/sys/class/net/eth1/gro_flush_timeout

lpx:~# sar -n DEV 1 10 | grep eth1
10:36:43 AM      eth1  81257.00   7747.00 120437.44    530.00      0.00      0.00      0.00
10:36:44 AM      eth1  81278.00   7748.00 120480.00    529.85      0.00      0.00      0.00
10:36:45 AM      eth1  81282.00   7752.00 120479.09    531.09      0.00      0.00      0.00
10:36:46 AM      eth1  81282.00   7751.00 120478.80    530.90      0.00      0.00      0.00
10:36:47 AM      eth1  81276.00   7745.00 120478.31    529.64      0.00      0.00      0.00
10:36:48 AM      eth1  81278.00   7747.00 120478.50    529.81      0.00      0.00      0.00
10:36:49 AM      eth1  81282.00   7749.00 120478.88    530.01      0.00      0.00      0.00
10:36:50 AM      eth1  81284.00   7751.00 120481.52    530.20      0.00      0.00      0.00
10:36:51 AM      eth1  81299.00   7769.00 120481.74    533.81      0.00      0.00      0.00
10:36:52 AM      eth1  81281.00   7748.00 120478.62    529.96      0.00      0.00      0.00
Average:         eth1  81279.90   7750.70 120475.29    530.53      0.00      0.00      0.00
Signed-off-by: NEric Dumazet <edumazet@google.com>
Acked-by: NMichael Chan <mchan@broadcom.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      24d2e4a5
    • D
      Merge branch 'dsa-next' · 050f7dcd
      由 David S. Miller 提交于 
      Florian Fainelli says:

====================
net: dsa: code re-organization

This pull request contains the first part of the patches required to implement
the grand plan detailed here:

http://www.spinics.net/lists/netdev/msg295942.html

These are mostly code re-organization and function bodies re-arrangement to
allow different callers of lower-level initialization functions for 'struct
dsa_switch' and 'struct dsa_switch_tree' to be later introduced.

There is no functional code change at this point.
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      050f7dcd
    • F
      net: dsa: extract dsa switch tree setup and removal · c86e59b9
      由 Florian Fainelli 提交于 
      Extract the core logic that setups a 'struct dsa_switch_tree' and
removes it, update dsa_probe() and dsa_remove() to use the two helper
functions. This will be useful to allow for other callers to setup
this structure differently.
Signed-off-by: NFlorian Fainelli <f.fainelli@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      c86e59b9
    • F
      net: dsa: let switches specify their tagging protocol · 59299031
      由 Florian Fainelli 提交于 
      In order to support the new DSA device driver model, a dsa_switch should
be able to advertise the type of tagging protocol supported by the
underlying switch device. This also removes constraints on how tagging
can be stacked to each other.
Signed-off-by: NFlorian Fainelli <f.fainelli@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      59299031
    • F
      net: dsa: split dsa_switch_setup into two functions · df197195
      由 Florian Fainelli 提交于 
      Split the part of dsa_switch_setup() which is responsible for allocating
and initializing a 'struct dsa_switch' and the part which is doing a
given switch device setup and slave network device creation.

This is a preliminary change to allow a separate caller of
dsa_switch_setup_one() which may have externally initialized the
dsa_switch structure, outside of dsa_switch_setup().
Signed-off-by: NFlorian Fainelli <f.fainelli@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      df197195
    • F
      net: dsa: allow deferred probing · b324c07a
      由 Florian Fainelli 提交于 
      In preparation for allowing a different model to register DSA switches,
update dsa_of_probe() and dsa_probe() to return -EPROBE_DEFER where
appropriate.

Failure to find a phandle or Device Tree property is still fatal, but
looking up the internal device structure associated with a Device Tree
node is something that might need to be delayed based on driver probe
ordering.
Signed-off-by: NFlorian Fainelli <f.fainelli@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      b324c07a