Skip to content

R
raspberrypi-kernel

openeuler / raspberrypi-kernel

通知 13
Star 1
Fork 0
R
raspberrypi-kernel
切换分支/标签
  1. 28 1月, 2011 2 次提交
    • T
      x86: Replace apic->apicid_to_node() with ->x86_32_numa_cpu_node() · 89e5dc21
      由 Tejun Heo 提交于 
      apic->apicid_to_node() is 32bit specific apic operation which
determines NUMA node for a CPU.  Depending on the APIC
implementation, it can be easier to determine NUMA node from
either physical or logical apicid.  Currently,
->apicid_to_node() takes @logical_apicid and calls
hard_smp_processor_id() if the physical apicid is needed.

This prevents NUMA mapping from being queried from a different
CPU, which in turn makes it impossible to initialize NUMA
mapping before SMP bringup.

This patch replaces apic->apicid_to_node() with
->x86_32_numa_cpu_node() which takes @cpu, from which both
logical and physical apicids can easily be determined.  While at
it, drop duplicate implementations from bigsmp_32 and summit_32,
and use the default one.
Signed-off-by: NTejun Heo <tj@kernel.org>
Reviewed-by: NPekka Enberg <penberg@kernel.org>
Cc: eric.dumazet@gmail.com
Cc: yinghai@kernel.org
Cc: brgerst@gmail.com
Cc: gorcunov@gmail.com
Cc: shaohui.zheng@intel.com
Cc: rientjes@google.com
LKML-Reference: <1295789862-25482-13-git-send-email-tj@kernel.org>
Signed-off-by: NIngo Molnar <mingo@elte.hu>
      89e5dc21
    • T
      x86: Kill apic->cpu_to_logical_apicid() · 7632611f
      由 Tejun Heo 提交于 
      After the previous patch, apic->cpu_to_logical_apicid() is no
longer used.  Kill it.

For apic types with custom cpu_to_logical_apicid() which is also
used for other purposes, remove the function and modify its
users to do the mapping directly.

#ifdef's on CONFIG_SMP in es7000_32 and summit_32 are ignored
during conversion as they are not used for UP kernels.
Signed-off-by: NTejun Heo <tj@kernel.org>
Cc: eric.dumazet@gmail.com
Cc: yinghai@kernel.org
Cc: brgerst@gmail.com
Cc: gorcunov@gmail.com
Cc: penberg@kernel.org
Cc: shaohui.zheng@intel.com
Cc: rientjes@google.com
LKML-Reference: <1295789862-25482-7-git-send-email-tj@kernel.org>
Signed-off-by: NIngo Molnar <mingo@elte.hu>
      7632611f
  3. 04 2月, 2010 1 次提交
  5. 19 1月, 2010 1 次提交
  7. 18 12月, 2009 1 次提交
    • S
      x86, irq: Allow 0xff for /proc/irq/[n]/smp_affinity on an 8-cpu system · 18374d89
      由 Suresh Siddha 提交于 
      John Blackwood reported:
> on an older Dell PowerEdge 6650 system with 8 cpus (4 are hyper-threaded),
> and  32 bit (x86) kernel, once you change the irq smp_affinity of an irq
> to be less than all cpus in the system, you can never change really the
> irq smp_affinity back to be all cpus in the system (0xff) again,
> even though no error status is returned on the "/bin/echo ff >
> /proc/irq/[n]/smp_affinity" operation.
>
> This is due to that fact that BAD_APICID has the same value as
> all cpus (0xff) on 32bit kernels, and thus the value returned from
> set_desc_affinity() via the cpu_mask_to_apicid_and() function is treated
> as a failure in set_ioapic_affinity_irq_desc(), and no affinity changes
> are made.

set_desc_affinity() is already checking if the incoming cpu mask
intersects with the cpu online mask or not. So there is no need
for the apic op cpu_mask_to_apicid_and() to check again
and return BAD_APICID.

Remove the BAD_APICID return value from cpu_mask_to_apicid_and()
and also fix set_desc_affinity() to return -1 instead of using BAD_APICID
to represent error conditions (as cpu_mask_to_apicid_and() can return
logical or physical apicid values and BAD_APICID is really to represent
bad physical apic id).
Reported-by: NJohn Blackwood <john.blackwood@ccur.com>
Root-caused-by: NJohn Blackwood <john.blackwood@ccur.com>
Signed-off-by: NSuresh Siddha <suresh.b.siddha@intel.com>
LKML-Reference: <1261103386.2535.409.camel@sbs-t61>
Signed-off-by: NH. Peter Anvin <hpa@zytor.com>
      18374d89
  9. 18 5月, 2009 1 次提交
  11. 11 5月, 2009 1 次提交
  13. 08 4月, 2009 1 次提交
  15. 25 3月, 2009 1 次提交
  17. 26 2月, 2009 2 次提交
  19. 18 2月, 2009 4 次提交
  21. 17 2月, 2009 1 次提交
  23. 30 1月, 2009 1 次提交
  25. 29 1月, 2009 17 次提交
  27. 18 12月, 2008 1 次提交
    • M
      x86: fix cpu_mask_to_apicid_and to include cpu_online_mask · a775a38b
      由 Mike Travis 提交于 
      Impact: fix potential APIC crash

In determining the destination apicid, there are usually three cpumasks
that are considered: the incoming cpumask arg, cfg->domain and the
cpu_online_mask.  Since we are just introducing the cpu_mask_to_apicid_and
function, make sure it includes the cpu_online_mask in it's evaluation.
[Added with this patch.]

There are two io_apic.c functions that did not previously use the
cpu_online_mask:  setup_IO_APIC_irq and msi_compose_msg.  Both of these
simply used cpu_mask_to_apicid(cfg->domain & TARGET_CPUS), and all but
one arch (NUMAQ[*]) returns only online cpus in the TARGET_CPUS mask,
so the behavior is identical for all cases.

[*: NUMAQ bug?]

Note that alloc_cpumask_var is only used for the 32-bit cases where
it's highly likely that the cpumask set size will be small and therefore
CPUMASK_OFFSTACK=n.  But if that's not the case, failing the allocate
will cause the same return value as the default.
Signed-off-by: NMike Travis <travis@sgi.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>
      a775a38b
  29. 17 12月, 2008 4 次提交
  31. 22 10月, 2008 1 次提交