- 17 5月, 2011 3 次提交
-
-
由 Ajit Khaparde 提交于
Added support to get version 1 of the stats for BE3. Use old stats command for BE2. Signed-off-by: NAjit Khaparde <ajit.khaparde@emulex.com> Signed-off-by: NSelvin Xavier <selvin.xavier@emulex.com> Signed-off-by: NPadmanabh Ratnakar <padmanabh.ratnakar@emulex.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Mahesh Bandewar 提交于
This patch updates the bnx2x_set_features() to handle loopback mode. When enabled; it sets internal-MAC loopback. Signed-off-by: NMahesh Bandewar <maheshb@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
At these points we have a fully filled in value via the IP header the form of ip_hdr(skb)->saddr Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 16 5月, 2011 12 次提交
-
-
由 Eric Dumazet 提交于
udp_ioctl() really handles UDP and UDPLite protocols. 1) It can increment UDP_MIB_INERRORS in case first_packet_length() finds a frame with bad checksum. 2) It has a dependency on sizeof(struct udphdr), not applicable to ICMP/PING If ping sockets need to handle SIOCINQ/SIOCOUTQ ioctl, this should be done differently. Signed-off-by: NEric Dumazet <eric.dumazet@gmail.com> CC: Vasiliy Kulikov <segoon@openwall.com> Acked-by: NVasiliy Kulikov <segoon@openwall.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Shan Wei 提交于
Signed-off-by: NShan Wei <shanwei@cn.fujitsu.com> Reviewed-by: NJiri Pirko <jpirko@redhat.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
Signed-off-by: NSjur Brændeland <sjur.brandeland@stericsson.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
Race condition caused debugfs_create_dir() to fail due to duplicate name. Use atomic counter to create unique directory name. net_ratelimit() is introduced to limit debug printouts. Signed-off-by: NSjur Brændeland <sjur.brandeland@stericsson.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
Do proper handling of dev_queue_xmit errors in order to avoid double free of skb and leaks in error conditions. In cfctrl pending requests are removed when CAIF Link layer goes down. Signed-off-by: NSjur Brændeland <sjur.brandeland@stericsson.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
Use struct net to reference CAIF configuration object instead of static variables. Refactor functions caif_connect_client, caif_disconnect_client and squach files cfcnfg.c and caif_config_utils. Signed-off-by: NSjur Brændeland <sjur.brandeland@stericsson.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
CAIF Socket Layer and ip-interface registers reference counters in CAIF service layer. The functions sock_hold, sock_put and dev_hold, dev_put are used by CAIF Stack to protect from freeing memory while packets are in-flight. Signed-off-by: NSjur Brændeland <sjur.brandeland@stericsson.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
Instead of having reference counts in caif service layers, we hook into existing refcount handling in socket layer and netdevice. Signed-off-by: NSjur Brændeland <sjur.brandeland@stericsson.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
Introduce Per-cpu reference for lower part of CAIF Stack. Before freeing payload is disabled, synchronize_rcu() is called, and then ref-count verified to be zero. Signed-off-by: NSjur Brændeland <sjur.brandeland@stericsson.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
RCU lists are used for handling the link layers instead of array. When generating CAIF phy-id, ifindex is used as base. Legal range is 1-6. Introduced set_phy_state() for managing CAIF Link layer state. Signed-off-by: NSjur Brændeland <sjur.brandeland@stericsson.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
RCU read_lock and refcount is used to protect in-flight packets. Use RCU and counters to manage freeing lower part of the CAIF stack if CAIF-link layer is removed. Old solution based on delaying removal of device is removed. When CAIF link layer goes down the use of CAIF link layer is disabled (by calling caif_set_phy_state()), but removal and freeing of the lower part of the CAIF stack is done when Link layer is unregistered. Signed-off-by: NSjur Brændeland <sjur.brandeland@stericsson.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
Replace spin_lock with rcu_read_lock when accessing lists to layers and cache. While packets are in flight rcu_read_lock should not be held, instead ref-counters are used in combination with RCU. Signed-off-by: NSjur Brændeland <sjur.brandeland@stericsson.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 15 5月, 2011 18 次提交
-
-
由 Eric Dumazet 提交于
ping_table is not __read_mostly, since it contains one rwlock, and is static to ping.c ping_port_rover & ping_v4_lookup are static Signed-off-by: NEric Dumazet <eric.dumazet@gmail.com> Acked-by: NVasiliy Kulikov <segoon@openwall.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
-
-
由 Don Skidmore 提交于
This patch adds support for a new adapter in the 82599 family. Included in that support is a new media_type ixgbe_media_type_fiber_lco. Signed-of-by: NDon Skidmore <donald.c.skidmore@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Emil Tantilov 提交于
error: bad constant expression Signed-off-by: NEmil Tantilov <emil.s.tantilov@intel.com> Tested-by: NEvan Swanson <evan.swanson@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Alexander Duyck 提交于
This patch cleans up two minor issues in ixgbe_down. Specifically it addresses the fact that the VFs should not be pinged until after interrupts are disabled otherwise they might still get a response. It also drops the use of the txdctl temporary variable since the only bit we should be writing to the TXDCTL registers during a shutdown is the flush bit. Signed-off-by: NAlexander Duyck <alexander.h.duyck@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Alexander Duyck 提交于
This change merges the over-temp task into the service task. As a result all tasklets are finally combined into once single tasklet for easier management. Signed-off-by: NAlexander Duyck <alexander.h.duyck@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Alexander Duyck 提交于
This change merges the ATR table reinitialization into the service task. This is yet another opportunity to avoid any race conditions as we don't want to be attempting to reinitialize the table during a possible reset. In addition this change adds a counter for table reinitialization so that it can be tracked as part of the regular statistics. Signed-off-by: NAlexander Duyck <alexander.h.duyck@intel.com> Tested-by: NEvan Swanson <evan.swanson@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Alexander Duyck 提交于
This change is meant to further help to reduce possible configuration collisions between the various tasklets. This change combines the device reset with the service task. As a result it is now not possible to be updating the link on the device while also resetting the part. Signed-off-by: NAlexander Duyck <alexander.h.duyck@intel.com> Tested-by: NEvan Swanson <evan.swanson@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Alexander Duyck 提交于
This patch is meant to merge the functionality of the ixgbe watchdog task into the service task. By doing this all link state functionality will be controlled by a single task. As a result the reliability of the interface will be improved as the likelihood of any race conditions is further reduced. Signed-off-by: NAlexander Duyck <alexander.h.duyck@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Alexander Duyck 提交于
This change is meant to address several race conditions with multi-speed fiber SFP+ modules in 82599 adapters. Specifically issues have been seen in which both the SFP configuration and the multi-speed fiber configuration are running simultaneously which will result in the device getting into an erroneous link down state. Signed-off-by: NAlexander Duyck <alexander.h.duyck@intel.com> Tested-by: NEvan Swanson <evan.swanson@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Alexander Duyck 提交于
This change moves flags and state into the same cacheline. The reason for this change is because both are frequently read around the same time and infrequently written. By combining them into the same cacheline this should help to reduce memory utilization. Signed-off-by: NAlexander Duyck <alexander.h.duyck@intel.com> Tested-by: NEvan Swanson <evan.swanson@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Emil Tantilov 提交于
The semaphore can be in locked state upon driver load, particularly on 82598 if a machine is rebooted due to panic and the semaphore was acquired just prior to the panic. This patch unlocks the semaphore if it times out. Signed-off-by: NEmil Tantilov <emil.s.tantilov@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Greg Rose 提交于
Add infrastructure in the PF driver to support macvlan in the VF driver. Signed-off-by: NGreg Rose <gregory.v.rose@intel.com> Tested-by: NSibai Li <sibai.li@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Greg Rose 提交于
Implement setup of unicast address list in the VF driver's set_rx_mode netdev op. Unicast addresses are sent to the PF via a mailbox message and the PF will check if it has room in the RAR table and if so set the filter for the VF. Signed-off-by: NGreg Rose <gregory.v.rose@intel.com> Tested-by: NSibai Li <sibai.li@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Bruce Allan 提交于
Signed-off-by: NBruce Allan <bruce.w.allan@intel.com> Tested-by: NAaron Brown <aaron.f.brown@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Marek Lindner 提交于
The broadcast flood protection should be reset to its original value if the primary interface could not be retrieved. Signed-off-by: NMarek Lindner <lindner_marek@yahoo.de> Signed-off-by: NSven Eckelmann <sven@narfation.org>
-
由 Sven Eckelmann 提交于
add_bcast_packet_to_list increases the refcount for if_incoming but the reference count is never decreased. The reference count must be increased for all kinds of forwarded packets which have the primary interface stored and forw_packet_free must decrease them. Also purge_outstanding_packets has to invoke forw_packet_free when a work item was really cancelled. This regression was introduced in 32ae9b22. Reported-by: NAntonio Quartulli <ordex@autistici.org> Signed-off-by: NSven Eckelmann <sven@narfation.org>
-
- 14 5月, 2011 7 次提交
-
-
由 David S. Miller 提交于
At this point iph->daddr equals what rt->rt_dst would hold. Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
Pass in the sk_buff so that we can fetch the necessary keys from the packet header when working with input routes. Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
This will allow ip_options_build() to reliably look at the values of iph->{daddr,saddr} Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
This code block executes when opt->srr_is_hit is set. It will be set only by ip_options_rcv_srr(). ip_options_rcv_srr() walks until it hits a matching nexthop in the SRR option addresses, and when it matches one 1) looks up the route for that nexthop and 2) on route lookup success it writes that nexthop value into iph->daddr. ip_forward_options() runs later, and again walks the SRR option addresses looking for the option matching the destination of the route stored in skb_rtable(). This route will be the same exact one looked up for the nexthop by ip_options_rcv_srr(). Therefore "rt->rt_dst == iph->daddr" must be true. All it really needs to do is record the route's source address in the matching SRR option adddress. It need not write iph->daddr again, since that has already been done by ip_options_rcv_srr() as detailed above. Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Alexey Dobriyan 提交于
->read_proc interface is going away, switch to seq_file. Signed-off-by: NAlexey Dobriyan <adobriyan@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Peter Pan(潘卫平) 提交于
In commit 1c5cae81 (net: call dev_alloc_name from register_netdevice), a bug of bonding was involved, see example 1 and 2. In register_netdevice(), the name of net_device is not valid until dev_get_valid_name() is called. But dev->netdev_ops->ndo_init(that is bond_init) is called before dev_get_valid_name(), and it uses the invalid name of net_device. I think register_netdevice() should make sure that the name of net_device is valid before calling ndo_init(). example 1: modprobe bonding ls /proc/net/bonding/bond%d ps -eLf root 3398 2 3398 0 1 21:34 ? 00:00:00 [bond%d] example 2: modprobe bonding max_bonds=3 [ 170.100292] bonding: Ethernet Channel Bonding Driver: v3.7.1 (April 27, 2011) [ 170.101090] bonding: Warning: either miimon or arp_interval and arp_ip_target module parameters must be specified, otherwise bonding will not detect link failures! see bonding.txt for details. [ 170.102469] ------------[ cut here ]------------ [ 170.103150] WARNING: at /home/pwp/net-next-2.6/fs/proc/generic.c:586 proc_register+0x126/0x157() [ 170.104075] Hardware name: VirtualBox [ 170.105065] proc_dir_entry 'bonding/bond%d' already registered [ 170.105613] Modules linked in: bonding(+) sunrpc ipv6 uinput microcode ppdev parport_pc parport joydev e1000 pcspkr i2c_piix4 i2c_core [last unloaded: bonding] [ 170.108397] Pid: 3457, comm: modprobe Not tainted 2.6.39-rc2+ #14 [ 170.108935] Call Trace: [ 170.109382] [<c0438f3b>] warn_slowpath_common+0x6a/0x7f [ 170.109911] [<c051a42a>] ? proc_register+0x126/0x157 [ 170.110329] [<c0438fc3>] warn_slowpath_fmt+0x2b/0x2f [ 170.110846] [<c051a42a>] proc_register+0x126/0x157 [ 170.111870] [<c051a4dd>] proc_create_data+0x82/0x98 [ 170.112335] [<f94e6af6>] bond_create_proc_entry+0x3f/0x73 [bonding] [ 170.112905] [<f94dd806>] bond_init+0x77/0xa5 [bonding] [ 170.113319] [<c0721ac6>] register_netdevice+0x8c/0x1d3 [ 170.113848] [<f94e0e30>] bond_create+0x6c/0x90 [bonding] [ 170.114322] [<f94f4763>] bonding_init+0x763/0x7b1 [bonding] [ 170.114879] [<c0401240>] do_one_initcall+0x76/0x122 [ 170.115317] [<f94f4000>] ? 0xf94f3fff [ 170.115799] [<c0463f1e>] sys_init_module+0x1286/0x140d [ 170.116879] [<c07c6d9f>] sysenter_do_call+0x12/0x28 [ 170.117404] ---[ end trace 64e4fac3ae5fff1a ]--- [ 170.117924] bond%d: Warning: failed to register to debugfs [ 170.128728] ------------[ cut here ]------------ [ 170.129360] WARNING: at /home/pwp/net-next-2.6/fs/proc/generic.c:586 proc_register+0x126/0x157() [ 170.130323] Hardware name: VirtualBox [ 170.130797] proc_dir_entry 'bonding/bond%d' already registered [ 170.131315] Modules linked in: bonding(+) sunrpc ipv6 uinput microcode ppdev parport_pc parport joydev e1000 pcspkr i2c_piix4 i2c_core [last unloaded: bonding] [ 170.133731] Pid: 3457, comm: modprobe Tainted: G W 2.6.39-rc2+ #14 [ 170.134308] Call Trace: [ 170.134743] [<c0438f3b>] warn_slowpath_common+0x6a/0x7f [ 170.135305] [<c051a42a>] ? proc_register+0x126/0x157 [ 170.135820] [<c0438fc3>] warn_slowpath_fmt+0x2b/0x2f [ 170.137168] [<c051a42a>] proc_register+0x126/0x157 [ 170.137700] [<c051a4dd>] proc_create_data+0x82/0x98 [ 170.138174] [<f94e6af6>] bond_create_proc_entry+0x3f/0x73 [bonding] [ 170.138745] [<f94dd806>] bond_init+0x77/0xa5 [bonding] [ 170.139278] [<c0721ac6>] register_netdevice+0x8c/0x1d3 [ 170.139828] [<f94e0e30>] bond_create+0x6c/0x90 [bonding] [ 170.140361] [<f94f4763>] bonding_init+0x763/0x7b1 [bonding] [ 170.140927] [<c0401240>] do_one_initcall+0x76/0x122 [ 170.141494] [<f94f4000>] ? 0xf94f3fff [ 170.141975] [<c0463f1e>] sys_init_module+0x1286/0x140d [ 170.142463] [<c07c6d9f>] sysenter_do_call+0x12/0x28 [ 170.142974] ---[ end trace 64e4fac3ae5fff1b ]--- [ 170.144949] bond%d: Warning: failed to register to debugfs Signed-off-by: NWeiping Pan <panweiping3@gmail.com> Reviewed-by: NJiri Pirko <jpirko@redhat.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Giuseppe CAVALLARO 提交于
This patch fixes a bug in the set_pauseparam function that didn't well manage the ANE field and returned broken values when use ethtool -A|-a. Signed-off-by: NGiuseppe Cavallaro <peppe.cavallaro@st.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-