Based upon a report from Meelis Roos.
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Signed-off-by: NDavid S. Miller <davem@davemloft.net>

* 'upstream-linus' of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/netdev-2.6:
  NET: add MAINTAINERS entry for ucc_geth driver
  myri10ge: report link up/down in standard ethtool way
  NetXen: Removal of extra free_irq call
  Update tulip maintainer email address
  smc91x: sh solution engine fixes.
  e1000: disable polling before registering netdevice
  network drivers: eliminate unneeded kill_vid code
  atl1: eliminate unneeded kill_vid code
  8139cp: fix VLAN unregistration
  sky2: Fix VLAN unregistration
  VLAN: kill_vid is only useful for VLAN filtering devices
  qla3xxx: device doesnt do hardware checksumming.

* git://git.kernel.org/pub/scm/linux/kernel/git/wim/linux-2.6-watchdog:
  [WATCHDOG] clean-up watchdog documentation
  [WATCHDOG] ks8695_wdt.c - new KS8695 watchdog driver

* 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc:
  [POWERPC] Fix zImage.coff generation for 32-bit pmac
  [POWERPC] Fix compile breakage for IBM/AMCC 4xx arch/ppc platforms
  [POWERPC] Don't allow PMAC_APM_EMU for 64-bit
  [POWERPC] Compare irq numbers with NO_IRQ not IRQ_NONE
  [POWERPC] Fix return from pte_alloc_one() in out-of-memory case
  [POWERPC] Fix compile warning in pseries xics code
  [POWERPC] Don't use HOSTCFLAGS in BOOTCFLAGS
  [POWERPC] Create a zImage for legacy iSeries
  [POWERPC] pasemi idle uses hard_smp_processor_id
  [POWERPC] ps3/interrupt.c uses get_hard_smp_processor_id
  [POWERPC] Fix possible access to free pages
  [POWERPC] Fix compiler/assembler flags for Ebony platform boot files
  [POWERPC] Fix ppc32 single-stepping out of syscalls
  [POWERPC] Update documentation for of_find_node_by_type()

Signed-off-by: NLi Yang <leoli@freescale.com>
Acked-by: NKim Phillips <kim.phillips@freescale.com>
Signed-off-by: NJeff Garzik <jeff@garzik.org>

Report link up/down in standard ethtool way
Signed-off-by: NBrice Goglin <brice@myri.com>
Signed-off-by: NJeff Garzik <jeff@garzik.org>

NetXen: Removal of redundant free_irq
This patch removes a redundant free_irq() call from remove() routine.
This will also eliminate a warning during unload of driver.
Signed-by: NMithlesh Thukral <mithlesh@netxen.com>
Signed-off-by: NJeff Garzik <jeff@garzik.org>

I've quit Intel and gone into business as a Linux consultant.  Update
my email address in MAINTAINERS.
Signed-off-by: NValerie Henson <val@nmt.edu>
Signed-off-by: NJeff Garzik <jeff@garzik.org>

The current smc91x I/O routines ifdef the solution engine subtypes
individually, which is rather bogus, as they can simply use
CONFIG_SOLUTION_ENGINE instead. This fixes it for some of the other
solution engines that weren't included in the ifdef list (SH7206
specifically).

There are also inb/outb definitions which are totally bogus (missing
brackets in _both_ cases, SMC_CAN_USE_8BIT == 0, and even better, they
try to use a 16-bit access to fake 8-bit access). Kill that nonsense off
completely.
Signed-off-by: NPaul Mundt <lethal@linux-sh.org>

--

 drivers/net/smc91x.h |    5 +----
 1 file changed, 1 insertion(+), 4 deletions(-)
Signed-off-by: NJeff Garzik <jeff@garzik.org>

To assure the symmetry of poll enable/disable in up/down, we should
initialize the netdevice to be poll_disabled at load time. Doing
this after register_netdevice leaves us open to another race, so
lets move all the netif_* calls above register_netdevice so the
stack starts out how we expect it to be.
Signed-off-by: NAuke Kok <auke-jan.h.kok@intel.com>
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Cc: Doug Chapman <doug.chapman@hp.com>
Signed-off-by: NJeff Garzik <jeff@garzik.org>

Many drivers had code that did kill_vid, but they weren't doing vlan
filtering. With new API the stub is unneeded unless device sets
NETIF_F_HW_VLAN_FILTER.

Bad habit: I couldn't resist fixing a couple of nearby style things
in acenic, and forcedeth.
Signed-off-by: NStephen Hemminger <shemminger@linux-foundation.org>
Signed-off-by: NJeff Garzik <jeff@garzik.org>

This driver has unneeded stubs for VLAN filtering.
Signed-off-by: NStephen Hemminger <shemminger@linux-foundation.org>
Signed-off-by: NJeff Garzik <jeff@garzik.org>

The 8139cp driver did VLAN unregistration incorrectly.
It disables VLAN completely when the first VID is unregistered. It
should instead disable VLAN when the group is unregistered by calling
cp_vlan_rx_register with a NULL grp.
Signed-off-by: NStephen Hemminger <shemminger@linux-foundation.org>
Signed-off-by: NJeff Garzik <jeff@garzik.org>

Fix sky2 disabling VLAN completely when the first vid is unregistered.

sky2 disables VLAN completely when the first VID is unregistered. It
should instead disable VLAN when the group is unregistered by calling
sky2_vlan_rx_register with grp = NULL.
Signed-off-by: NPatrick McHardy <kaber@trash.net>
Signed-off-by: NStephen Hemminger <shemminger@linux-foundation.org>

 drivers/net/sky2.c |   25 +++++++++++++------------
 1 file changed, 13 insertions(+), 12 deletions(-)
Signed-off-by: NJeff Garzik <jeff@garzik.org>

The interface for network device VLAN extension was confusing.
The kill_vid function is only really useful for devices that do
hardware filtering. Devices that only do VLAN receiption without
filtering were being forced to provide the hook, and there were
bugs in those devices.

Many drivers had kill_vid routine that called vlan_group_set_device, with
NULL, but that is done already.
Signed-off-by: NStephen Hemminger <shemminger@linux-foundation.org>
Signed-off-by: NJeff Garzik <jeff@garzik.org>

Reading the code for ql_hw_csum_setup(), it is obvious that
this driver is broken for IPV6. The driver sets the NETIF_F_HW_SUM
flag, but the code for checksum setup only deals with IPV4.

Compile tested only, no hardware available.
Signed-off-by: NStephen Hemminger <shemminger@linux-foundation.org>
Signed-off-by: NJeff Garzik <jeff@garzik.org>

Commit 9da82a6d inadvertently
removed the platform override for zImage.coff to be generated
with pmaccoff.   Rather than add a special makefile rule,
change the platform for which the wrapper platform uses
the special rules.
Signed-off-by: NMilton Miller <miltonm@bga.com>
Signed-off-by: NPaul Mackerras <paulus@samba.org>

The IBM/AMCC 405 platforms don't compile anymore in the current
kernel version.  This fixes the compile breakage.
Signed-off-by: NStefan Roese <sr@denx.de>
Signed-off-by: NPaul Mackerras <paulus@samba.org>

In b3028878 I switched the apm emulation
code to use the generic code but accidentally dropped the PPC32
dependency from the configuration symbol. This adds it back.
Signed-off-by: NJohannes Berg <johannes@sipsolutions.net>
Signed-off-by: NPaul Mackerras <paulus@samba.org>

There is a thinko in the irq code, it uses IRQ_NONE to indicate no irq,
whereas it should be using NO_IRQ.  IRQ_NONE is returned from irq
handlers to say "not handled".

As it happens they currently have the same value (0), so this is just for
future proof-ness.
Signed-off-by: NMichael Ellerman <michael@ellerman.id.au>
Acked-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: NPaul Mackerras <paulus@samba.org>

pte_alloc_one() is expected to return NULL if out of memory.
But it returns virt_to_page(NULL), which is not NULL.
This fixes it.

Cc: Paul Mackerras <paulus@samba.org>
Signed-off-by: NAkinobu Mita <mita@fixstars.com>
Signed-off-by: NPaul Mackerras <paulus@samba.org>

In 616883df request_irq was marked as
__must_check so we must... er... check it.
Signed-off-by: NMichael Neuling <mikey@neuling.org>
Signed-off-by: NPaul Mackerras <paulus@samba.org>

In the bootwrapper code for powerpc, we include HOSTCFLAGS into the
BOOTCFLAGS used for building the zImage wrapper code.  Since the
wrapper code is not host code, this makes no sense.  This patch
removes the use of HOSTCFLAGS here, instead including directly into
BOOTCFLAGS those flags from the normal kernel CFLAGS which also make
sense in the bootwrapper code.

In particular, this makes the bootwrapper use -msoft-float, preventing
the compiler from generating floating point instructions.  Previously,
under some circumstances the compiler could generate floating point
instructions in the bootwrapper which would cause exceptions on
embedded CPUS which don't have floating point support.
Signed-off-by: NDavid Gibson <david@gibson.dropbear.id.au>
Acked-by: NJosh Boyer <jwboyer@linux.vnet.ibm.com>
Signed-off-by: NPaul Mackerras <paulus@samba.org>

This zImage is really just the stripped vmlinux, but it means that there
is one less special case for iSeries and also that the zImages will be
built for a combined kernel build that happens to include iSeries.

This zImage boots fine on legacy iSeries.
Signed-off-by: NStephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: NPaul Mackerras <paulus@samba.org>

and so needs to include asm/smp.h so a UP build works.
Signed-off-by: NStephen Rothwell <sfr@canb.auug.org.au>
Acked-by: NOlof Johansson <olof@lixom.net>
Signed-off-by: NPaul Mackerras <paulus@samba.org>

and so needs to include asm/smp.h for a UP build to work.
Signed-off-by: NStephen Rothwell <sfr@canb.auug.org.au>
Acked-by: NGeoff Levand <geoffrey.levand@am.sony.com>
Signed-off-by: NPaul Mackerras <paulus@samba.org>

I think we have a subtle race on ppc64 with the tlb batching.  The
common code expects tlb_flush() to actually flush any pending TLB
batch.  It does that because it delays all page freeing until after
tlb_flush() is called, in order to ensure no stale reference to
those pages exist in any TLB, thus causing potential access to
the freed pages.

However, our tlb_flush only triggers the RCU for freeing page
table pages, it does not currently trigger a flush of a pending
TLB/hash batch, which is, I think, an error.  This fixes it.
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: NPaul Mackerras <paulus@samba.org>

The recent addition of assembler flags for 44x.c and ebony.c in the
bootwrapper to make them compile on certain toolchains was not correct
and could break other platforms.  This patch switches to using a
compiler flag instead, which implies the appropriate assembler flag,
and also stops the compiler itself generating instructions which are
invalid for the platform in question.
Signed-off-by: NDavid Gibson <david@gibson.dropbear.id.au>
Acked-by: NSegher Boessenkool <segher@kernel.crashing.org>
Signed-off-by: NPaul Mackerras <paulus@samba.org>

The ppc32 kernel didn't properly set/clear the TIF_SINGLESTEP
flag, causing return from syscalls to not SIGTRAP, thus executing
one more instruction before stopping again.

This fixes it.  The ptrace code is a bit of a mess, and is overdue
for at least a -proper- 32/64 bits split and possibly more cleanups
but this minimum fix should be ok for 2.6.22
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: NPaul Mackerras <paulus@samba.org>

The documentation for of_find_node_by_type() incorrectly refers to the
"name" parameter - it should be "type".

Also the behaviour when from == NULL is not really documented, fix that.
Signed-off-by: NMichael Ellerman <michael@ellerman.id.au>
Signed-off-by: NPaul Mackerras <paulus@samba.org>

Implemented support to allow Package objects to be passed as
method arguments to the acpi_evaluate_object interface. Previously,
this would return an AE_NOT_IMPLEMENTED exception.
Signed-off-by: NBob Moore <robert.moore@intel.com>
Signed-off-by: NLen Brown <len.brown@intel.com>

Last of the "Section mismatch" errors from ia64 builds! acpi_map_pxm_to_node()
is defined with attribute __cpuinit, but is called by "normal" kernel functions
acpi_getnode() and acpi_map_cpu2node().

Commit f363d16f moved the data structures on
which this routine operates from __cpuinitdata to regular memory, so this
routine can also move out of init space.
Signed-off-by: NTony Luck <tony.luck@intel.com>
Signed-off-by: NLen Brown <len.brown@intel.com>

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394-2.6:
  firewire: Install firewire-constants.h and firewire-cdev.h for userspace.
  firewire: Change struct fw_cdev_iso_packet to not use bitfields.
  firewire: Implement suspend/resume PCI driver hooks.
  firewire: add to MAINTAINERS
  firewire: fw-sbp2: implement sysfs ieee1394_id
  ieee1394: sbp2: offer SAM-conforming target port ID in sysfs
  ieee1394: fix calculation of sysfs attribute "address"

Make timer-stats have almost zero overhead when enabled in the config but
not used.  (this way distros can enable it more easily)

Also update the documentation about overhead of timer_stats - it was
written for the first version which had a global lock and a linear list
walk based lookup ;-)
Signed-off-by: NIngo Molnar <mingo@elte.hu>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Fix two races in the timer stats lookup code.  One by ensuring that the
initialization of a new entry is finished upon insertion of that entry.
The other by cleaning up the hash table when the entries array is cleared,
so that we don't have any "pre-inserted" entries.

Thanks to Eric Dumazet for reminding me of the memory barriers.
Signed-off-by: NBjorn Steinbrink <B.Steinbrink@gmx.de>
Signed-off-by: NIan Kumlien <pomac@vapor.com>
Acked-by: NIngo Molnar <mingo@elte.hu>
Cc: Eric Dumazet <dada1@cosmosbay.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Fix following section mismatch warning in hp100:

WARNING: drivers/net/hp100.o(.init.text+0x26a): Section mismatch: reference to .exit.text: (after 'init_module')

The warning says that we use a function marked __exit from a
function marked __init.
This is not good on architectures where we discard __exit section
for drivers that are built-in.

Note: This warning is only seen by my local copy of modpost
      but the change will soon hit upstream.
Signed-off-by: NSam Ravnborg <sam@ravnborg.org>
Acked-by: NJeff Garzik <jeff@garzik.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Fix following section mismatch warning in kvm-intel.o:
WARNING: o-i386/drivers/kvm/kvm-intel.o(.init.text+0xbd): Section mismatch: reference to .exit.text: (between 'hardware_setup' and 'vmx_disabled_by_bios')

The function free_kvm_area is used in the function alloc_kvm_area which
is marked __init.
The __exit area is discarded by some archs during link-time if a
module is built-in resulting in an oops.

Note: This warning is only seen by my local copy of modpost
      but the change will soon hit upstream.
Signed-off-by: NSam Ravnborg <sam@ravnborg.org>
Cc: Avi Kivity <avi@qumranet.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>