Skip to content

R
raspberrypi-kernel

openeuler / raspberrypi-kernel

通知 13
Star 1
Fork 0
R
raspberrypi-kernel
切换分支/标签
  1. 23 9月, 2008 2 次提交
  3. 10 9月, 2008 1 次提交
  5. 09 9月, 2008 4 次提交
  7. 15 8月, 2008 2 次提交
  9. 06 8月, 2008 1 次提交
  11. 28 7月, 2008 1 次提交
  13. 21 7月, 2008 1 次提交
  15. 30 9月, 2008 1 次提交
  17. 01 9月, 2008 1 次提交
  19. 27 7月, 2008 1 次提交
    • N
      ALSA: Allow to force model to intel-mac-v3 in snd_hda_intel (sigmatel). · 536319af
      由 Nicolas Boichat 提交于 
      Currently, even if you pass model=intel-mac-v3 as a module parameter to
snd_hda_intel, the function patch_stac922x (patch_sigmatel.c) will still
try to auto-detect the model type. This is a problem on my MacBook Pro 1st
generation, which needs intel-mac-v3, but sometimes incorrectly reports
0x00000100 as subsystem id, which causes the switch in patch_stac922x to
select intel-mac-v4.

To fix this, I added a new model called intel-mac-auto, so in case no
module parameter is passed, and an Intel Mac board is detected, the
model will be automatically detected, while no detection will be done
if the model is forced to intel-mac-v3.

This problem has been around for quite a while, and I used to fix it
by moving the case statement for 0x00000100 in patch_stac922x so that
intel-mac-v3 is chosen.

Another way to fix the problem would be to check if a module parameter
was set directly in patch_stac922x, using something like this:
if (spec->board_config == STAC_INTEL_MAC_V3 &&
	!codec->bus->modelname) {

But I think it is less elegant (if you prefer that way, I can prepare a
patch).
Signed-off-by: NNicolas Boichat <nicolas@boichat.ch>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>
      536319af
  21. 14 7月, 2008 1 次提交
  23. 10 7月, 2008 1 次提交
  25. 16 6月, 2008 1 次提交
  27. 13 6月, 2008 1 次提交
  29. 26 5月, 2008 1 次提交
  31. 05 5月, 2008 1 次提交
  33. 24 4月, 2008 19 次提交