Signed-off-by: NLeon Romanovsky <leon@leon.nu>
Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>

Signed-off-by: NLeon Romanovsky <leon@leon.nu>
Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>

Large code size increase due to the addition of readability information
and the reformatting of the defaults table.
Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>

Get things configured as early as possible, especially useful for the
GPIOs which might be useful anyway.
Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>

There are no current users and new drivers ought to be using the regmap
API and its cache implementation directly so just delete the ASoC copy.
Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>

This driver implements basic functionality, using I²C for the control
channel.
Signed-off-by: NLeon Romanovsky <leon@leon.nu>
Signed-off-by: NAndrey Danin <danindrey@mail.ru>
Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>

Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>

Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>

The Lowland platform is based on the Cragganmore system like Speyside but
uses the WM5100 audio CODEC.
Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>

More standard Linuxish.
Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>

Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>

ASoC knows nothing about the cache now.
Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>

Use snd_soc_update_bits for read-modify-write register access instead of
open-coding it using snd_soc_read and snd_soc_write
Signed-off-by: NAxel Lin <axel.lin@gmail.com>
Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>

Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>

Allow them to work when the device is unclocked.
Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>

WM9081_BIAS_ENA is the bit[1] of WM9081_BIAS_CONTROL_1 register (05h).
Current code incorrectly write it to WM9081_VMID_CONTROL(04h) register.
Signed-off-by: NAxel Lin <axel.lin@gmail.com>
Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>

VMID Divider Enable and Select is controlled by BIT[2:1] of WM9081_VMID_CONTROL
register (04h).
Current code reads wrong register (WM9081_BIAS_CONTROL_1) for setting
VMID 2*240k.
Signed-off-by: NAxel Lin <axel.lin@gmail.com>
Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>

Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>

Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>

This initial conversion just moves the register init, regulator acquisition
and device verification out to the I2C probe(). Movement of other parts of
the driver like the GPIO and beep generation code will follow.
Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>

Actually pretty straightforward.
Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>

Now that the WM8996 driver is using the regmap API for register I/O we no
longer need the ASoC card to be active in order to interact with the chip.
In order to be more idiomatic for Linux move most of the existing probe()
function out into the I2C probe() function prior to registration with ASoC.

The IRQ and GPIO init will be moved separately as these are slightly more
involved.
Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>

Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>

snd_soc_update_bits already does read-modify-write,
no need to read the register before calling snd_soc_update_bits.
Signed-off-by: NAxel Lin <axel.lin@gmail.com>
Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>

FSI2 can control valid data position, like
package in front/back or stream  mode (16bit x 2).
But current fsi driver is assuming it was in-back.
Signed-off-by: NKuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>

ak4642 was tested by ms7724se board
Signed-off-by: NKuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>

This patch fixup below warning

${linux}/sound/soc/sh/fsi.c:442:3:\
 warning: passing argument 1 of '__fsi_reg_read' makes pointer\
 from integer without a cast
${linux}/sound/soc/sh/fsi.c:517:3: \
 warning: passing argument 1 of '__fsi_reg_write' makes pointer\
 from integer without a cast
${linux}/sound/soc/sh/fsi.c:663:3: \
 warning: passing argument 1 of '__fsi_reg_mask_set' makes pointer\
 from integer without a cast
Signed-off-by: NKuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>

Occasionally we may see an accessory reported before we have a stable
impedance for the accessory. If this happens then reread the status in
order to ensure that the handler can take the appropriate action for the
status change.
Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>

The field is no longer initialised so this will crash if running on
wm8958.
Reported-by: NThomas Abraham <thomas.abraham@linaro.org>
Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>

The field is no longer initialised so this will crash if running on
wm8958.
Reported-by: NThomas Abraham <thomas.abraham@linaro.org>
Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
Cc: stable@kernel.org

The thermal shutdown support in wm_hubs devices is tied to the speaker
drivers (which are the only high power subsystems within the device).
Ensure minimal current usage when the thermal shutdown support is not
required by disabling the circuit when the speaker drivers are powered
down.
Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>

Disable the thermal shutdown circuits for headphone and speaker when the
relevant outputs are not enabled in order to save current in idle modes.
Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>

The WM9081 thermal shutdown is only effective when the speaker output is
enabled so disable it when that is not in use for a small current saving.
Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>

There's no point in adding unlikely() annotations outside of hot paths
and on systems using these features the annotation will always be wrong
(as opposed to being something that only comes up once in a while) so
the annotation may even be harmful.
Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>

Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>

Having a separate list for amps is a little confusing now the official
driver model for them is the same as for other CODECs so let's sort them
into the CODEC list, but only do this for those that are actual CODEC
drivers so it's easier to remember which ones need updating.
Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>

They aren't needed any more. If machines need them for other purposes then
further changes will be required.
Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>

Force MICBIAS on as well as SYSCLK as the WM8962 accessory detection can't
function without both. No point in making machine drivers manually enable
it.
Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>

Ensure everything is set up before we start detecting.
Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>

Since we have code to automatically manage the start and stop of the FLL
based on the SYSCLK widget if SYSCLK is already enabled and the FLL is
configured then we need to start it up.
Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>